...
This page summarizes the changes introduced in each component maintenance release for Universal Agent 6.56.x.
For a list of all component changes included in the maintenance release for each platform, see:
...
Universal Automation Center Agent
...
(UAG)
Anchor |
---|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
6.0.0 -
...
March 31,
...
2019
Change ID | Component | Platform | Description |
---|---|---|---|
B-09303 08447 | UAGSRV | All | Enable connection fault tolerance for FTP file monitor tasks. |
B-09733 | UAGSRV | z/OS | Verify agent execution on z/OS 2.3. |
Universal Agent Command Line Interface
...
Change ID | Component | Platform | Description |
---|---|---|---|
D-03978 | UAGCMD | All | Honor time out interval when establishing new connections. |
Universal Automation Center Agent (UAG)
...
Change ID | Component | Platform | Description |
---|---|---|---|
B-07354 | UAGSRV | Windows | Add “fault tolerance” for Windows tasks, providing automatic retry/restart for failures. |
B-09246 | UAGSRV | All | Implement newer, more secure method of passing Credentials between Controller and UAG. |
B-09717 | UAGSRV | All | Enhance 3rd-party load balancer and clustering support by returning the UAGSRV QNAME value in a Universal Query response. |
B-09734 | UAGSRV | z/OS | Produce an audit report at UAGSRV start-up. |
B-09775 | UAGSRV | z/OS | Enhance the deleted datasets report. |
B-09815 | OMSSRV | UNIX | Add SSL/TLS client authentication to OMS server for UAGSRV. |
B-09826 | UAGSRV | z/OS | Preserve customer-specific statements in JOB card when inserting UAGSRV-required SET statements. |
B-09864 | UAGSRV | z/OS | Allow switching of user contexts without requiring READ access to BPX.SUPERUSER and BPX.DAEMON. |
D-09191 | UAGSRV | UNIX | Fix UDM task failure when using a non-interactive account for the utility agent and the home directory for that account does not exist. |
D-09278 | UAGSRV | z/OS | Ensure a job is not left in SUBMITTED status when a JCL error occurs and an “IEFC452I Job not run” message is issued. |
D-09306 | UAGSRV | z/OS | Ensure job output is properly re-queued to the correct SYSOUT class. |
D-09311 | UAGSRV | z/OS | Job stays in SUBMITTED state if UAGRERUN does not run. |
D-09318 | UAGSRV | Windows | Fix crash that may occur on Windows when UAGSRV attempts to obtain performance data from the registry. |
D-09332 | UAGRERUN | z/OS | UAGRERUN S0C4 - Inaccessible storage. |
D-09386 | UAGSRV | z/OS | Prevent S878 when interpreting/converting JCL prior to job submission. |
Universal Broker
...
Change ID | Component | Platform | Description |
---|---|---|---|
B-09717 | UAGSRV | All | Enhance 3rd-party load balancer and clustering support by returning the UAGSRV QNAME value in a Universal Query response. |
Universal Command
...
Change ID | Component | Platform | Description |
---|---|---|---|
B-09861 | UCMSRV | z/OS | Allow switching of user contexts without requiring READ access to BPX.SUPERUSER and BPX.DAEMON. |
Universal Data Mover
...
Change ID | Component | Platform | Description |
---|---|---|---|
B-09367 | UDMSRV | z/OS | Allow switching of user contexts without requiring READ access to BPX.SUPERUSER and BPX.DAEMON. |
D-07308 | UDM | All | Improve performance when an exec command returns a large output stream to UDM Manager. |
D-09334 | UDM | z/OS | Prevent S0C4 when specifying a sequential dataset in a forfiles statement. |
Universal Enterprise Controller
...
Change ID | Component | Platform | Description |
---|---|---|---|
B-09863 | UECTLR | z/OS | Remove requirement for READ access to BPX.SUPERUSER. |
Universal FTP Client
...
Change ID | Component | Platform | Description |
---|---|---|---|
B-09718 | UFTP | UNIX | Generate unique UFTP trace file names using its component or exec ID. |
D-09333 | UFTP | All | Prevent start failure for FTP File Monitor task when directory/file does not exist. |
Universal Message Service (OMS)
...
Change ID | Component | Platform | Description |
---|---|---|---|
B-09815 | OMSSRV | UNIX | Add SSL/TLS client authentication to OMS server for UAGSRV. |
B-09880 | OMS Client | UNIX | Add SSL/TLS client authentication to OMS server in OMS Java client. |
D-09197 | OMSSRV | UNIX | Properly assign function callbacks for all states to ensure all task status changes are reflected in the Controller. |
Universal Query
...
Allow UAG to verify SMF exit version and capabilities. | |||
B-09879 | UAGSRV | z/OS | Add detection of $HASP106 messages to prevent z/OS tasks from remaining in Submitted status. |
B-10117 | UAGSRV | Unix | Add ability to specify a minimum size for file monitor and FTP file monitor tasks. |
B-10208 | UAGSRV | All | Refresh UAG config options that do not require agent restart. |
D-03442 | UAGSRV | z/OS | UAG log data set does not support large format sequential data sets. |
D-04942 | UAGSRV | Unix | No error message issued from Linux/Unix task if runtime directory not found. |
D-09361 | UAGSRV | Unix | CHANGE monitor with Scan Text does not work properly on multiple changes. |
D-09396 | UAGSRV | Unix | 'noauth' parameter is not honored in uag_work_request UACL entries. |
D-09409 | UAGSRV | z/OS | JME_SCAN message can be processed concurrently with Job End message. |
D-09440 | UAGSRV | z/OS | Prevent S0C4 for archived datasets during z/OS task rerun. |
D-09447 | UAGSRV | z/OS | Confirm JCL Changes report in UI for a z/OS task does not match the Mismatched JCL report in the output. |
D-09451 | z/OS | UAGSRV | An extra step was incorrectly added to the Restartable Steps when re-running a z/OS task. |
D-09463 | UAGSRV | z/OS | The ‘USER=,PASSWORD=’ parms that UAG addes to a job card may cause a JCL error. |
D-09516 | UAGSRV | Unix | Turn off world-writable flag for *_job files. |
Universal Broker
Anchor | ||||
---|---|---|---|---|
|
Change ID | Component | Platform | Description |
---|---|---|---|
B-01832 | Linux | UDMSRV | Add PAM session support to UDM. |
B-04918 | All | USAP | Add ability to transfer spool requests in blocks. |
B-04919 | All | USAP | Add support for job logs that exceed the size limits of BAPI_XBP_JOB_JOBLOG_READ. |
B-08841 | z/OS | UBROKER | When cancelling a z/OS UCMD Manager that selected its UCMD Server system from a host list, ensure local Broker sends the STOP command to correct Server. |
B-08447 | All | UAGSRV | Enable connection fault tolerance for FTP file monitor tasks. |
B-08874 | z/OS | UDM | Eliminate extra buffer copy for z/OS datasets to improve CPU utilization. |
B-09330 | All | UDM | Add ability to transfer text data as binary and translate on target system. |
B-09345 | All | USAP | Add max_spool_size_exceeded_exitcode option to set exit code when USAP spool size exceeds configured max_spool_size. |
B-09733 | z/OS | UAGSRV | Allow UAG to verify SMF exit version and capabilities. |
B-09879 | z/OS | UAGSRV | Add detection of $HASP106 messages to prevent z/OS tasks from remaining in Submitted status. |
B-10117 | Unix | UAGSRV | Add ability to specify a minimum size for file monitor and FTP file monitor tasks. |
B-10129 | All | USAP | Enable command line support for additional SAP Connection Parameters. |
B-10208 | All | UAGSRV | Refresh UAG config options that do not require agent restart. |
B-10377 | Unix | USAP | Add support for NW RFC connection SNC_MODE parameter. |
D-03442 | z/OS | UAGSRV | UAG log data set does not support large format sequential data sets. |
D-04942 | Unix | UAGSRV | No error message issued from Linux/Unix task if runtime directory not found. |
D-09066 | Unix | OMSSRV | Data integrity errors related to message database reads should be treated as unrecoverable errors. |
D-09361 | Unix | UAGSRV | CHANGE monitor with Scan Text does not work properly on multiple changes. |
D-09396 | Unix | UAGSRV | 'noauth' parameter is not honored in uag_work_request UACL entries. |
D-09397 | Unix | UPPS | SOAP message truncation occurs and XML validation error is issued when "Schedule Process" command includes a runControlID and processType whose combined lengths are greater than 31 (Unix) or 32 (Windows) characters. |
D-09409 | z/OS | UAGSRV | JME_SCAN message can be processed concurrently with Job End message. |
D-09416 | z/OS | UCMSRV | “exec” command fails to launch STC when Broker runs without BPX.SUPERUSER/BPX.DAEMON privileges. |
D-09428 | Unix | OMSSRV | Server may be blocked on no response on session negotiation packets. |
D-09440 | z/OS | UAGSRV | Prevent S0C4 for archived datasets during z/OS task rerun. |
D-09447 | z/OS | UAGSRV | Confirm JCL Changes report in UI for a z/OS task does not match the Mismatched JCL report in the output. |
D-09451 | z/OS | UAGSRV | An extra step was incorrectly added to the Restartable Steps when re-running a z/OS task. |
D-09463 | z/OS | UAGSRV | The ‘USER=,PASSWORD=’ parms that UAG addes to a job card may cause a JCL error. |
D-09516 | Unix | UAGSRV | Turn off world-writable flag for *_job files. |
D-09605 | Unix | OMSSRV | OMS should prevent the use a generated segment key of 0. |
Universal Command
Anchor | ||||
---|---|---|---|---|
|
Change ID | Component | Platform | Description |
---|---|---|---|
B-01832 | Linux | UDMSRV | Add PAM session support to UDM. |
B-04918 | All | USAP | Add ability to transfer spool requests in blocks. |
B-04919 | All | USAP | Add support for job logs that exceed the size limits of BAPI_XBP_JOB_JOBLOG_READ. |
B-08841 | z/OS | UBROKER | When cancelling a z/OS UCMD Manager that selected its UCMD Server system from a host list, ensure local Broker sends the STOP command to correct Server. |
B-08447 | All | UAGSRV | Enable connection fault tolerance for FTP file monitor tasks. |
B-08874 | z/OS | UDM | Eliminate extra buffer copy for z/OS datasets to improve CPU utilization. |
B-09330 | All | UDM | Add ability to transfer text data as binary and translate on target system. |
B-09345 | All | USAP | Add max_spool_size_exceeded_exitcode option to set exit code when USAP spool size exceeds configured max_spool_size. |
B-09733 | z/OS | UAGSRV | Allow UAG to verify SMF exit version and capabilities. |
B-09879 | z/OS | UAGSRV | Add detection of $HASP106 messages to prevent z/OS tasks from remaining in Submitted status. |
B-10117 | Unix | UAGSRV | Add ability to specify a minimum size for file monitor and FTP file monitor tasks. |
B-10129 | All | USAP | Enable command line support for additional SAP Connection Parameters. |
B-10208 | All | UAGSRV | Refresh UAG config options that do not require agent restart. |
B-10377 | Unix | USAP | Add support for NW RFC connection SNC_MODE parameter. |
D-03442 | z/OS | UAGSRV | UAG log data set does not support large format sequential data sets. |
D-04942 | Unix | UAGSRV | No error message issued from Linux/Unix task if runtime directory not found. |
D-09066 | Unix | OMSSRV | Data integrity errors related to message database reads should be treated as unrecoverable errors. |
D-09361 | Unix | UAGSRV | CHANGE monitor with Scan Text does not work properly on multiple changes. |
D-09396 | Unix | UAGSRV | 'noauth' parameter is not honored in uag_work_request UACL entries. |
D-09397 | Unix | UPPS | SOAP message truncation occurs and XML validation error is issued when "Schedule Process" command includes a runControlID and processType whose combined lengths are greater than 31 (Unix) or 32 (Windows) characters. |
D-09409 | z/OS | UAGSRV | JME_SCAN message can be processed concurrently with Job End message. |
D-09416 | z/OS | UCMSRV | “exec” command fails to launch STC when Broker runs without BPX.SUPERUSER/BPX.DAEMON privileges. |
D-09428 | Unix | OMSSRV | Server may be blocked on no response on session negotiation packets. |
D-09440 | z/OS | UAGSRV | Prevent S0C4 for archived datasets during z/OS task rerun. |
D-09447 | z/OS | UAGSRV | Confirm JCL Changes report in UI for a z/OS task does not match the Mismatched JCL report in the output. |
D-09451 | z/OS | UAGSRV | An extra step was incorrectly added to the Restartable Steps when re-running a z/OS task. |
D-09463 | z/OS | UAGSRV | The ‘USER=,PASSWORD=’ parms that UAG addes to a job card may cause a JCL error. |
D-09516 | Unix | UAGSRV | Turn off world-writable flag for *_job files. |
D-09605 | Unix | OMSSRV | OMS should prevent the use a generated segment key of 0. |
Universal Connector for PeopleSoft
Anchor | ||||
---|---|---|---|---|
|
Change ID | Component | Platform | Description |
---|---|---|---|
B-01832 | Linux | UDMSRV | Add PAM session support to UDM. |
B-04918 | All | USAP | Add ability to transfer spool requests in blocks. |
B-04919 | All | USAP | Add support for job logs that exceed the size limits of BAPI_XBP_JOB_JOBLOG_READ. |
B-08841 | z/OS | UBROKER | When cancelling a z/OS UCMD Manager that selected its UCMD Server system from a host list, ensure local Broker sends the STOP command to correct Server. |
B-08447 | All | UAGSRV | Enable connection fault tolerance for FTP file monitor tasks. |
B-08874 | z/OS | UDM | Eliminate extra buffer copy for z/OS datasets to improve CPU utilization. |
B-09330 | All | UDM | Add ability to transfer text data as binary and translate on target system. |
B-09345 | All | USAP | Add max_spool_size_exceeded_exitcode option to set exit code when USAP spool size exceeds configured max_spool_size. |
B-09733 | z/OS | UAGSRV | Allow UAG to verify SMF exit version and capabilities. |
B-09879 | z/OS | UAGSRV | Add detection of $HASP106 messages to prevent z/OS tasks from remaining in Submitted status. |
B-10117 | Unix | UAGSRV | Add ability to specify a minimum size for file monitor and FTP file monitor tasks. |
B-10129 | All | USAP | Enable command line support for additional SAP Connection Parameters. |
B-10208 | All | UAGSRV | Refresh UAG config options that do not require agent restart. |
B-10377 | Unix | USAP | Add support for NW RFC connection SNC_MODE parameter. |
D-03442 | z/OS | UAGSRV | UAG log data set does not support large format sequential data sets. |
D-04942 | Unix | UAGSRV | No error message issued from Linux/Unix task if runtime directory not found. |
D-09066 | Unix | OMSSRV | Data integrity errors related to message database reads should be treated as unrecoverable errors. |
D-09361 | Unix | UAGSRV | CHANGE monitor with Scan Text does not work properly on multiple changes. |
D-09396 | Unix | UAGSRV | 'noauth' parameter is not honored in uag_work_request UACL entries. |
D-09397 | Unix | UPPS | SOAP message truncation occurs and XML validation error is issued when "Schedule Process" command includes a runControlID and processType whose combined lengths are greater than 31 (Unix) or 32 (Windows) characters. |
D-09409 | z/OS | UAGSRV | JME_SCAN message can be processed concurrently with Job End message. |
D-09416 | z/OS | UCMSRV | “exec” command fails to launch STC when Broker runs without BPX.SUPERUSER/BPX.DAEMON privileges. |
D-09428 | Unix | OMSSRV | Server may be blocked on no response on session negotiation packets. |
D-09440 | z/OS | UAGSRV | Prevent S0C4 for archived datasets during z/OS task rerun. |
D-09447 | z/OS | UAGSRV | Confirm JCL Changes report in UI for a z/OS task does not match the Mismatched JCL report in the output. |
D-09451 | z/OS | UAGSRV | An extra step was incorrectly added to the Restartable Steps when re-running a z/OS task. |
D-09463 | z/OS | UAGSRV | The ‘USER=,PASSWORD=’ parms that UAG addes to a job card may cause a JCL error. |
D-09516 | Unix | UAGSRV | Turn off world-writable flag for *_job files. |
D-09605 | Unix | OMSSRV | OMS should prevent the use a generated segment key of 0. |
Universal Connector for SAP
Anchor | ||||
---|---|---|---|---|
|
Change ID | Component | Platform | Description |
---|---|---|---|
B-01832 | Linux | UDMSRV | Add PAM session support to UDM. |
B-04918 | All | USAP | Add ability to transfer spool requests in blocks. |
B-04919 | All | USAP | Add support for job logs that exceed the size limits of BAPI_XBP_JOB_JOBLOG_READ. |
B-08841 | z/OS | UBROKER | When cancelling a z/OS UCMD Manager that selected its UCMD Server system from a host list, ensure local Broker sends the STOP command to correct Server. |
B-08447 | All | UAGSRV | Enable connection fault tolerance for FTP file monitor tasks. |
B-08874 | z/OS | UDM | Eliminate extra buffer copy for z/OS datasets to improve CPU utilization. |
B-09330 | All | UDM | Add ability to transfer text data as binary and translate on target system. |
B-09345 | All | USAP | Add max_spool_size_exceeded_exitcode option to set exit code when USAP spool size exceeds configured max_spool_size. |
B-09733 | z/OS | UAGSRV | Allow UAG to verify SMF exit version and capabilities. |
B-09879 | z/OS | UAGSRV | Add detection of $HASP106 messages to prevent z/OS tasks from remaining in Submitted status. |
B-10117 | Unix | UAGSRV | Add ability to specify a minimum size for file monitor and FTP file monitor tasks. |
B-10129 | All | USAP | Enable command line support for additional SAP Connection Parameters. |
B-10208 | All | UAGSRV | Refresh UAG config options that do not require agent restart. |
B-10377 | Unix | USAP | Add support for NW RFC connection SNC_MODE parameter. |
D-03442 | z/OS | UAGSRV | UAG log data set does not support large format sequential data sets. |
D-04942 | Unix | UAGSRV | No error message issued from Linux/Unix task if runtime directory not found. |
D-09066 | Unix | OMSSRV | Data integrity errors related to message database reads should be treated as unrecoverable errors. |
D-09361 | Unix | UAGSRV | CHANGE monitor with Scan Text does not work properly on multiple changes. |
D-09396 | Unix | UAGSRV | 'noauth' parameter is not honored in uag_work_request UACL entries. |
D-09397 | Unix | UPPS | SOAP message truncation occurs and XML validation error is issued when "Schedule Process" command includes a runControlID and processType whose combined lengths are greater than 31 (Unix) or 32 (Windows) characters. |
D-09409 | z/OS | UAGSRV | JME_SCAN message can be processed concurrently with Job End message. |
D-09416 | z/OS | UCMSRV | “exec” command fails to launch STC when Broker runs without BPX.SUPERUSER/BPX.DAEMON privileges. |
D-09428 | Unix | OMSSRV | Server may be blocked on no response on session negotiation packets. |
D-09440 | z/OS | UAGSRV | Prevent S0C4 for archived datasets during z/OS task rerun. |
D-09447 | z/OS | UAGSRV | Confirm JCL Changes report in UI for a z/OS task does not match the Mismatched JCL report in the output. |
D-09451 | z/OS | UAGSRV | An extra step was incorrectly added to the Restartable Steps when re-running a z/OS task. |
D-09463 | z/OS | UAGSRV | The ‘USER=,PASSWORD=’ parms that UAG addes to a job card may cause a JCL error. |
D-09516 | Unix | UAGSRV | Turn off world-writable flag for *_job files. |
D-09605 | Unix | OMSSRV | OMS should prevent the use a generated segment key of 0. |
Universal Data Mover
Anchor | ||||
---|---|---|---|---|
|
Change ID | Component | Platform | Description |
---|---|---|---|
Change ID | Component | Platform | Description |
B-01832 | Linux | UDMSRV | Add PAM session support to UDM. |
B-04918 | All | USAP | Add ability to transfer spool requests in blocks. |
B-04919 | All | USAP | Add support for job logs that exceed the size limits of BAPI_XBP_JOB_JOBLOG_READ. |
B-08841 | z/OS | UBROKER | When cancelling a z/OS UCMD Manager that selected its UCMD Server system from a host list, ensure local Broker sends the STOP command to correct Server. |
B-08447 | All | UAGSRV | Enable connection fault tolerance for FTP file monitor tasks. |
B-08874 | z/OS | UDM | Eliminate extra buffer copy for z/OS datasets to improve CPU utilization. |
B-09330 | All | UDM | Add ability to transfer text data as binary and translate on target system. |
B-09345 | All | USAP | Add max_spool_size_exceeded_exitcode option to set exit code when USAP spool size exceeds configured max_spool_size. |
B-09733 | z/OS | UAGSRV | Allow UAG to verify SMF exit version and capabilities. |
B-09879 | z/OS | UAGSRV | Add detection of $HASP106 messages to prevent z/OS tasks from remaining in Submitted status. |
B-10117 | Unix | UAGSRV | Add ability to specify a minimum size for file monitor and FTP file monitor tasks. |
B-10129 | All | USAP | Enable command line support for additional SAP Connection Parameters. |
B-10208 | All | UAGSRV | Refresh UAG config options that do not require agent restart. |
B-10377 | Unix | USAP | Add support for NW RFC connection SNC_MODE parameter. |
D-03442 | z/OS | UAGSRV | UAG log data set does not support large format sequential data sets. |
D-04942 | Unix | UAGSRV | No error message issued from Linux/Unix task if runtime directory not found. |
D-09066 | Unix | OMSSRV | Data integrity errors related to message database reads should be treated as unrecoverable errors. |
D-09361 | Unix | UAGSRV | CHANGE monitor with Scan Text does not work properly on multiple changes. |
D-09396 | Unix | UAGSRV | 'noauth' parameter is not honored in uag_work_request UACL entries. |
D-09397 | Unix | UPPS | SOAP message truncation occurs and XML validation error is issued when "Schedule Process" command includes a runControlID and processType whose combined lengths are greater than 31 (Unix) or 32 (Windows) characters. |
D-09409 | z/OS | UAGSRV | JME_SCAN message can be processed concurrently with Job End message. |
D-09416 | z/OS | UCMSRV | “exec” command fails to launch STC when Broker runs without BPX.SUPERUSER/BPX.DAEMON privileges. |
D-09428 | Unix | OMSSRV | Server may be blocked on no response on session negotiation packets. |
D-09440 | z/OS | UAGSRV | Prevent S0C4 for archived datasets during z/OS task rerun. |
D-09447 | z/OS | UAGSRV | Confirm JCL Changes report in UI for a z/OS task does not match the Mismatched JCL report in the output. |
D-09451 | z/OS | UAGSRV | An extra step was incorrectly added to the Restartable Steps when re-running a z/OS task. |
D-09463 | z/OS | UAGSRV | The ‘USER=,PASSWORD=’ parms that UAG addes to a job card may cause a JCL error. |
D-09516 | Unix | UAGSRV | Turn off world-writable flag for *_job files. |
D-09605 | Unix | OMSSRV | OMS should prevent the use a generated segment key of 0. |
Universal FTP Client
Anchor | ||||
---|---|---|---|---|
|
Change ID | Component | Platform | Description |
---|---|---|---|
Change ID | Component | Platform | Description |
B-01832 | Linux | UDMSRV | Add PAM session support to UDM. |
B-04918 | All | USAP | Add ability to transfer spool requests in blocks. |
B-04919 | All | USAP | Add support for job logs that exceed the size limits of BAPI_XBP_JOB_JOBLOG_READ. |
B-08841 | z/OS | UBROKER | When cancelling a z/OS UCMD Manager that selected its UCMD Server system from a host list, ensure local Broker sends the STOP command to correct Server. |
B-08447 | All | UAGSRV | Enable connection fault tolerance for FTP file monitor tasks. |
B-08874 | z/OS | UDM | Eliminate extra buffer copy for z/OS datasets to improve CPU utilization. |
B-09330 | All | UDM | Add ability to transfer text data as binary and translate on target system. |
B-09345 | All | USAP | Add max_spool_size_exceeded_exitcode option to set exit code when USAP spool size exceeds configured max_spool_size. |
B-09733 | z/OS | UAGSRV | Allow UAG to verify SMF exit version and capabilities. |
B-09879 | z/OS | UAGSRV | Add detection of $HASP106 messages to prevent z/OS tasks from remaining in Submitted status. |
B-10117 | Unix | UAGSRV | Add ability to specify a minimum size for file monitor and FTP file monitor tasks. |
B-10129 | All | USAP | Enable command line support for additional SAP Connection Parameters. |
B-10208 | All | UAGSRV | Refresh UAG config options that do not require agent restart. |
B-10377 | Unix | USAP | Add support for NW RFC connection SNC_MODE parameter. |
D-03442 | z/OS | UAGSRV | UAG log data set does not support large format sequential data sets. |
D-04942 | Unix | UAGSRV | No error message issued from Linux/Unix task if runtime directory not found. |
D-09066 | Unix | OMSSRV | Data integrity errors related to message database reads should be treated as unrecoverable errors. |
D-09361 | Unix | UAGSRV | CHANGE monitor with Scan Text does not work properly on multiple changes. |
D-09396 | Unix | UAGSRV | 'noauth' parameter is not honored in uag_work_request UACL entries. |
D-09397 | Unix | UPPS | SOAP message truncation occurs and XML validation error is issued when "Schedule Process" command includes a runControlID and processType whose combined lengths are greater than 31 (Unix) or 32 (Windows) characters. |
D-09409 | z/OS | UAGSRV | JME_SCAN message can be processed concurrently with Job End message. |
D-09416 | z/OS | UCMSRV | “exec” command fails to launch STC when Broker runs without BPX.SUPERUSER/BPX.DAEMON privileges. |
D-09428 | Unix | OMSSRV | Server may be blocked on no response on session negotiation packets. |
D-09440 | z/OS | UAGSRV | Prevent S0C4 for archived datasets during z/OS task rerun. |
D-09447 | z/OS | UAGSRV | Confirm JCL Changes report in UI for a z/OS task does not match the Mismatched JCL report in the output. |
D-09451 | z/OS | UAGSRV | An extra step was incorrectly added to the Restartable Steps when re-running a z/OS task. |
D-09463 | z/OS | UAGSRV | The ‘USER=,PASSWORD=’ parms that UAG addes to a job card may cause a JCL error. |
D-09516 | Unix | UAGSRV | Turn off world-writable flag for *_job files. |
D-09605 | Unix | OMSSRV | OMS should prevent the use a generated segment key of 0. |
Universal Message Service (OMS)
Anchor | ||||
---|---|---|---|---|
|
Change ID | Component | Platform | Description | |
---|---|---|---|---|
Change ID | Component | Platform | Description | |
B-09717 01832 | Linux | UAGSRV | All | Enhance 3rd-party load balancer and clustering support by returning the UAGSRV QNAME value in a Universal Query response. |
Install
...
Change ID | Component | Platform | Description | |
---|---|---|---|---|
B-09500 | Install | Linux | Withdraw Universal Agent support for native 32-bit Windows and Linux packages. | |
D-09307 | Install | Windows | Restore UAG_AUTOSTART command line option default to "no" UDMSRV | Add PAM session support to UDM. |
B-04918 | All | USAP | Add ability to transfer spool requests in blocks. | |
B-04919 | All | USAP | Add support for job logs that exceed the size limits of BAPI_XBP_JOB_JOBLOG_READ. | |
B-08841 | z/OS | UBROKER | When cancelling a z/OS UCMD Manager that selected its UCMD Server system from a host list, ensure local Broker sends the STOP command to correct Server. | |
B-08447 | All | UAGSRV | Enable connection fault tolerance for FTP file monitor tasks. | |
B-08874 | z/OS | UDM | Eliminate extra buffer copy for z/OS datasets to improve CPU utilization. | |
B-09330 | All | UDM | Add ability to transfer text data as binary and translate on target system. | |
B-09345 | All | USAP | Add max_spool_size_exceeded_exitcode option to set exit code when USAP spool size exceeds configured max_spool_size. | |
B-09733 | z/OS | UAGSRV | Allow UAG to verify SMF exit version and capabilities. | |
B-09879 | z/OS | UAGSRV | Add detection of $HASP106 messages to prevent z/OS tasks from remaining in Submitted status. | |
B-10117 | Unix | UAGSRV | Add ability to specify a minimum size for file monitor and FTP file monitor tasks. | |
B-10129 | All | USAP | Enable command line support for additional SAP Connection Parameters. | |
B-10208 | All | UAGSRV | Refresh UAG config options that do not require agent restart. | |
B-10377 | Unix | USAP | Add support for NW RFC connection SNC_MODE parameter. | |
D-03442 | z/OS | UAGSRV | UAG log data set does not support large format sequential data sets. | |
D-04942 | Unix | UAGSRV | No error message issued from Linux/Unix task if runtime directory not found. | |
D-09066 | Unix | OMSSRV | Data integrity errors related to message database reads should be treated as unrecoverable errors. | |
D-09361 | Unix | UAGSRV | CHANGE monitor with Scan Text does not work properly on multiple changes. | |
D-09396 | Unix | UAGSRV | 'noauth' parameter is not honored in uag_work_request UACL entries. | |
D-09397 | Unix | UPPS | SOAP message truncation occurs and XML validation error is issued when "Schedule Process" command includes a runControlID and processType whose combined lengths are greater than 31 (Unix) or 32 (Windows) characters. | |
D-09409 | z/OS | UAGSRV | JME_SCAN message can be processed concurrently with Job End message. | |
D-09416 | z/OS | UCMSRV | “exec” command fails to launch STC when Broker runs without BPX.SUPERUSER/BPX.DAEMON privileges. | |
D-09428 | Unix | OMSSRV | Server may be blocked on no response on session negotiation packets. | |
D-09440 | z/OS | UAGSRV | Prevent S0C4 for archived datasets during z/OS task rerun. | |
D-09447 | z/OS | UAGSRV | Confirm JCL Changes report in UI for a z/OS task does not match the Mismatched JCL report in the output. | |
D-09451 | z/OS | UAGSRV | An extra step was incorrectly added to the Restartable Steps when re-running a z/OS task. | |
D-09463 | z/OS | UAGSRV | The ‘USER=,PASSWORD=’ parms that UAG addes to a job card may cause a JCL error. | |
D-09516 | Unix | UAGSRV | Turn off world-writable flag for *_job files. | |
D-09605 | Unix | OMSSRV | OMS should prevent the use a generated segment key of 0. |