...
To uncompress and extract the installation files from the distribution file, issue the following command:
Panel | ||
---|---|---|
|
This command assumes the following:
...
To start the installation script, unvinst, and install all of the HP-UX packages, issue the following command:
Panel |
---|
See HP-UX Installation Script Parameters and Installation Script Example, below, for a description of the optional parameters that you can issue with unvinst and an example of unvinst with these parameters.
Note | ||
---|---|---|
| ||
If you want to install multiple Agents on the same machine, or add one or more additional Agents to a machine with a previously installed Agent, some of these installation parameters are required (see Installing Multiple Agents on a Single Machine). |
...
System initialization files /sbin/init.d/ubrokerd and /sbin/rc3.d/S850ubrokerd are created to start the ubrokerd daemon when the system boots to runlevel 3.
The Universal Broker daemon will be installed and run as the username and groupname specified with the installation script parameters, below.
Note | ||
---|---|---|
| ||
With the Solaris, HP-UX, and AIX installs, the previous installation directories are removed when the native installer has detected that additional directories or files have not been added to the original installation directories. If they have been modified, the directories will remain and can be reviewed and removed, as desired, by your Administrator. |
...
The following table describes the optional parameters that are available in the installation script, unvinst, when installing Universal Agent.
The parameters are grouped into the following categories:
...
Category
...
Description
...
...
Used for base install.
...
...
Used for an active OMS configuration.
...
...
Used for an active UAG configuration.
...
...
Used for Universal Controller CLI programs install.
...
...
Used for user mode installation.
...
Parameter
...
Description
...
Default
...
Normal UNIX username that is used to execute the Universal Broker daemon. The install grants this user account ownership of all installed files, with the exception of the Universal Agent server components (for example: ucmsrv, udmsrv, and uemsrv) which, due to security requirements, are owned by root and will have their "set user ID on execution" bit set.
...
|
See HP-UX Installation Script Parameters and Installation Script Example, below, for a description of the optional parameters that you can issue with unvinst and an example of unvinst with these parameters.
Note | ||
---|---|---|
| ||
If you want to install multiple Agents on the same machine, or add one or more additional Agents to a machine with a previously installed Agent, some of these installation parameters are required (see Installing Multiple Agents on a Single Machine). |
This is a silent install. The output from unvinst is written to file install.log in the current directory.
System initialization files /sbin/init.d/ubrokerd and /sbin/rc3.d/S850ubrokerd are created to start the ubrokerd daemon when the system boots to runlevel 3.
The Universal Broker daemon will be installed and run as the username and groupname specified with the installation script parameters, below.
Note | ||
---|---|---|
| ||
With the Solaris, HP-UX, and AIX installs, the previous installation directories are removed when the native installer has detected that additional directories or files have not been added to the original installation directories. If they have been modified, the directories will remain and can be reviewed and removed, as desired, by your Administrator. |
Anchor | ||||
---|---|---|---|---|
|
The following table describes the optional parameters that are available in the installation script, unvinst, when installing Universal Agent.
The parameters are grouped into the following categories:
Category | Description |
---|---|
Used for base install. | |
Used for an active OMS configuration. | |
Used for an active UAG configuration. | |
Used for Universal Controller CLI programs install. | |
Used for user mode installation. |
The following example illustrates Universal Agent for HP_UX installed with the installation script, unvinst, and optional parameters.
...
Parameter | Description | Default | ||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
-u
| Normal UNIX username that is used to execute the Universal Broker daemon. The install grants this user account ownership of all installed files, with the exception of the Universal Agent server components (for example: ucmsrv, udmsrv, and uemsrv) which, due to security requirements, are owned by root and will have their "set user ID on execution" bit set.
| ubroker | ||||||
‑create_user
| Specification (yes or no) for whether or not to create the user name that will own the installed files as a local user. | yes | ||||||
‑userdir | Home directory for the created user account specified by --user.
|
| ||||||
-g | Normal UNIX groupname; the Universal Broker daemon will run as this specified group. All installed files will be assigned to this group.
| ubroker | ||||||
‑create_group
| Specification (yes or no) for whether or not to create the group that will own the installed files as a local group. | yes | ||||||
‑‑keystore | Specification (yes or no) for whether or not to create encryption keys during installation and set up the local Universal Broker as a keystore owner. | no | ||||||
| ||||||||
-c
| Causes
| |||||||
-d | If --convert_opsagent is specified: Identifies the primary install directory for Universal Agent.
| ubroker | ‑create_user||||||
Anchor | --create_user | --create_user | ‑‑create_userSpecification (yes or no) for whether or not to create the user name that will own the installed files as a local user. | yes | ||||
‑userdir | Home directory for the created user account specified by --user.
|
| ||||||
-g | Normal UNIX groupname; the Universal Broker daemon will run as this specified group. All installed files will be assigned to this group.
| ubroker | ||||||
Anchor | --create_group | --create_group | ‑‑create_groupSpecification (yes or no) for whether or not to create the group that will own the installed files as a local group. | yes | ||||
Anchor | -keystore | -keystore | ‑keystoreSpecification (yes or no) for whether or not to create encryption keys during installation and set up the local Universal Broker as a keystore owner. | no | ||||
Anchor | UAG | UAG | UAG Parameters-c||||||
Anchor | --convert_opsagent | --convert_opsagent | ‑‑convert_opsagentCauses
| |||||
-d | If --convert_opsagent is specified: Identifies the primary install directory for Universal Agent.
|
| ||||||
Anchor | --oms_servers | --oms_servers | ‑‑oms_serversSpecifies a value, in the format
| (none) | ||||
‑ac_agent_clusters | Specifies the Universal Controller-defined clusters to which this agent will belong. | (none) | ||||||
‑ac_agent_ip | Specifies the IP address or host name (which resolves to an IP address) that the Agent reports to the Controller. | (none) | ||||||
‑ac_netname | Specifies the network ID that Universal Agent will use. | (none) | ||||||
‑ac_enable_ssl | This option is deprecated starting with Universal Agent 7.1.0.0. UAG Server will always attempt to use SSL/TLS for OMS connections. | n/a | ||||||
-ac_process_cancel_timeout | Set the PROCESS_CANCEL_TIMEOUT UAG configuration option, which specifies the length of time an OS task is given to complete its response to a CANCEL request. If the task fails to finish its own termination processing within the specified timeout period, UAG Server will forcefully terminate the task. The specified timeout must be numeric, but a one-letter suffix is accepted to specify (s)econds, (m)inutes, (h)ours, or (d)ays. If no time unit is specified, the default is seconds. The following maximums are enforced:
Minute, hour, and day maximums are set to ensure that their value represented as a number of seconds does not exceed 2147483647. | 10 | ||||||
Anchor | --uag_autostart | --uag_autostart | ‑‑uag_autostartSpecifies (yes or no) whether or not the Universal Automation Center Agent (UAG) Server starts automatically when the Universal Broker is started. | yes | ||||
Anchor | OMS | OMS | OMS Parameters||||||
‑oms_port | Specifies the port to use to listen for OMS connection requests. | (none) | ||||||
Anchor | --oms_autostart | --oms_autostart | ‑‑oms_autostartSpecifies (yes or no) whether or not OMS is started automatically by Universal Broker when Universal Broker starts. | no | ||||
Anchor | CLI | CLI | CLI Parameters‑opscli||||||
Anchor | --opscli | --opscli | ‑‑opscliSpecifies (yes or no) whether or not the Universal Controller Command Line Interface (CLI) tools will be installed. | no | ||||
Anchor | User Mode | User Mode | User Mode Parameters||||||
Anchor | --usermode_install | --usermode_install | -USpecifies (yes or no) for a user mode installation, which defines both of the following:
| no | ||||
Anchor | --unvdir | --unvdir | -unvdir||||||
Anchor | unvdir | unvdir | --unvdirIf --usermode_install is set to yes: Specifies the Agent binaries (installation) directory. | (none) | ‑unvcfgdir||||
Anchor | unvcfgdir | unvcfgdir | ‑‑unvcfgdirIf --usermode_install is set to yes: Specifies the Agent configuration files directory. |
| ‑unvdatadir||||
Anchor | unvdatadir | unvdatadir | ‑‑unvdatadirIf --usermode_install is set to yes: Specifies the Agent data files directory. |
| ‑unvport||||
Anchor | unvport | unvport | ‑‑unvportIf --usermode_install is set to yes: Specifies the Universal Broker port. | (none) | Additional Parameter | |||
-? | Displays command line help. | n/a |
...
| ||||||||||||||
‑oms_servers
| Specifies a value, in the format
| (none) | ||||||||||||
‑ac_agent_clusters | Specifies the Universal Controller-defined clusters to which this agent will belong. | (none) | ||||||||||||
‑ac_agent_ip | Specifies the IP address or host name (which resolves to an IP address) that the Agent reports to the Controller. | (none) | ||||||||||||
‑ac_netname | Specifies the network ID that Universal Agent will use. | (none) | ||||||||||||
‑ac_enable_ssl | This option is deprecated starting with Universal Agent 7.1.0.0. UAG Server will always attempt to use SSL/TLS for OMS connections. | n/a | ||||||||||||
-ac_process_cancel_timeout | Set the PROCESS_CANCEL_TIMEOUT UAG configuration option, which specifies the length of time an OS task is given to complete its response to a CANCEL request. If the task fails to finish its own termination processing within the specified timeout period, UAG Server will forcefully terminate the task. The specified timeout must be numeric, but a one-letter suffix is accepted to specify (s)econds, (m)inutes, (h)ours, or (d)ays. If no time unit is specified, the default is seconds. The following maximums are enforced:
Minute, hour, and day maximums are set to ensure that their value represented as a number of seconds does not exceed 2147483647. | 10 | ||||||||||||
‑uag_autostart
| Specifies (yes or no) whether or not the Universal Automation Center Agent (UAG) Server starts automatically when the Universal Broker is started. | yes | ||||||||||||
| ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
‑oms_port | Specifies the port to use to listen for OMS connection requests. | (none) | ||||||||||||
‑oms_autostart
| Specifies (yes or no) whether or not OMS is started automatically by Universal Broker when Universal Broker starts. | no | ||||||||||||
| ||||||||||||||
‑opscli
| Specifies (yes or no) whether or not the Universal Controller Command Line Interface (CLI) tools will be installed. | no | ||||||||||||
| ||||||||||||||
-usermode_install --usermode_install | Specifies (yes or no) for a user mode installation, which defines both of the following:
| no | ||||||||||||
| If --usermode_install is set to yes: Specifies the Agent binaries (installation) directory. | (none) | ||||||||||||
‑unvcfgdir
| If --usermode_install is set to yes: Specifies the Agent configuration files directory. |
| ||||||||||||
‑unvdatadir
| If --usermode_install is set to yes: Specifies the Agent data files directory. |
| ||||||||||||
‑unvport
| If --usermode_install is set to yes: Specifies the Universal Broker port. | (none) | ||||||||||||
Additional Parameter | ||||||||||||||
-? | Displays command line help. | n/a |
Anchor | ||||
---|---|---|---|---|
|
The following example illustrates Universal Agent for HP_UX installed with the installation script, unvinst, and optional parameters.
Panel | ||
---|---|---|
|
Anchor | ||||
---|---|---|---|---|
|
...
To list information for Universal Agent for HP-UX, issue the following command:
Panel | ||
---|---|---|
|
Removing Universal Agent for HP-UX
...
Step 1 | Stop the ubrokerd daemon. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Step 2 | Make a backup copy of the | |||||||||||||
Step 3 | Using the superuser ID, remove all Universal Agent for HP-UX sub-products by issuing the following commands: Panel |
System initialization files
| ||||||||||||
Step 4 | Delete the Agent user account ( Panel |
| ||||||||||||
Step 5 | Delete the Agent group (
|
User Mode Install Removal
Step 1 | Stop the Usermode Broker. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Step 2 | Make a backup copy of the | ||||||||||||||
Step 3 | Panel | Using the superuser ID, remove all Universal Agent for Linux packages by issuing the following commands: Panel |
| ||||||||||||
Step 4 | Delete the Agent user account (
| ||||||||||||||
Step 5 | Delete the Agent group (
|
Note | ||
---|---|---|
| ||
To remove an Agent executing in an unprivileged user mode environment (see User Mode Installation), simply stop the |