Page Comparison

...

Step 1

Edit the UDMG Server configuration file and set the AllowLegacyCiphers parameter to true:

[sftp]
; Set to true to allow legacy and weak cipher algorithms: 3des-cbs,aes128-cbc,arcfour,arcfour128,arcfour256,blowfich-cbc
AllowLegacyCiphers = true

Step 2

Restart the UDMG Server service.

The legacy ciphers are now globally allowed but not used by default.

Step 3 Login to UDMG Admin UI and navigate to Remote Partners Service via the navigation pane.

Step 4

Select the partner rebex from Tutorial - Creating an SFTP Partner.

Step 5

With a specific tool or with the verbose mode of your console SFTP client, check what are the algorithms that the remote partner is supporting for cipher algorithms.

For example, with a Linux SFP (OpenSSH_7.4p1):

Code Block

$ sftp -vv -c aes128-cbc -o NumberOfPasswordPrompts=0 dummY@test.rebex.net 2>&1 |grep -A 6 'server KEXINIT proposal' |grep -v stoc
debug2: peer server KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp521,ecdh-sha2-nistp384,ecdh-sha2-nistp256,diffie-hellman-group16-sha512,diffie-hellman-group15-sha512,diffie-hellman-group-exchange-sha256,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1,ext-info-s
debug2: host key algorithms: ssh-ed25519,ecdsa-sha2-nistp521,ecdsa-sha2-nistp384,ecdsa-sha2-nistp256,rsa-sha2-512,ssh-rsa-sha256@ssh.com,rsa-sha2-256,ssh-rsa
debug2: ciphers ctos: aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes256-cbc,aes192-ctr,aes192-cbc,aes128-ctr,aes128-cbc,chacha20-poly1305@openssh.com,twofish256-ctr,twofish192-ctr,twofish128-ctr
debug2: MACs ctos: hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-sha1,hmac-sha1-96

This shows that several algorithms are supported for each category and especially the legacy cipher 'aes128-cbc'.

Step 6

From Remote Partner Details, select the Partner tab.

The gray dot on the tab shows that configuration is still the default, all available algorithms are supported by the server and proposed to the clients.

In the MAC algorithms, select any number of algorithms except hmac-sha2-256-etm@openssh.com (as it would be enabled otherwise).

In the Encryption Algorithms, select aes128-cbc.

Note

Note: the MAC algorithm hmac-sha2-256-etm@openssh.com is not compatible with the CBC encryption algorithms (aes128-cbc, 3des-cbc, blowfich-cbc).

Transfer attempts for such a combination of algorithms will raise an error 'Error on remote partner: ssh: handshake failed: ssh: packet too large'.

Image RemovedImage Added

Step 7

Click Save icon ().

Step 8

The partner configuration is updated. The green dot on the tab shows that the configuration is customized.

Step 9

Perform a file download, for instance here with the command line client.

Code Block

$ udmg-client transfer add -f readme.txt -w receive -p rebex -l demo -r rebex_receive_example
The transfer of file readme.txt was successfully added with ID 187.

$ udmg-client transfer get 187
● Transfer 187 (receive as client) [DONE]
    Remote ID:         1631341630940250112
    Protocol:          sftp
    Rule:              rebex_receive_example
    Requester:         demo
    Requested:         rebex
    Local filepath:    /data/in/readme.txt
    Remote filepath:   /readme.txt
    File size:         405
    Start date:        2023-03-02 17:12:08.335589 +0000 UTC
    End date:          2023-03-02 17:12:15.336517 +0000 UTC
    Bytes transferred: 405
    Transfer values:
      - udmg_sftp_client_version: SSH-2.0-Go
      - udmg_sftp_config_ciphers: [aes128-cbc]
      - udmg_sftp_config_kex: [curve25519-sha256@libssh.org ecdh-sha2-nistp256 ecdh-sha2-nistp384 ecdh-sha2-nistp521 diffie-hellman-group-exchange-sha256 diffie-hellman-group1-sha1 diffie-hellman-group14-sha1]
      - udmg_sftp_config_mac: [hmac-sha1 hmac-sha1-96 hmac-sha2-256]
      - udmg_sftp_failed_auth_methods: [none]
      - udmg_sftp_hostkey_algo: ssh-rsa
      - udmg_sftp_kex_algo: curve25519-sha256@libssh.org
      - udmg_sftp_read_algos: map[cipher:aes128-cbc compression:none mac:hmac-sha1]
      - udmg_sftp_server_version: SSH-2.0-RebexSSH_5.0.8208.0
      - udmg_sftp_sucessful_auth_methods: password
      - udmg_sftp_write_algos: map[cipher:aes128-cbc compression:none mac:hmac-sha1]
      - udmg_xfer_log: /config/logs/187.log

[ec2-user@ip-172-31-2-90 ~]$ waarp-gateway transfer get 187|grep cipher
      - udmg_sftp_config_ciphers: [aes128-cbc]
      - udmg_sftp_read_algos: map[cipher:aes128-cbc compression:none mac:hmac-sha1]
      - udmg_sftp_write_algos: map[cipher:aes128-cbc compression:none mac:hmac-sha1]

By checking the result after the completion with the get command, the transfer info metadata shows which encryption algorithm was configured on the client side (udmg_sftp_config_ciphers) and which algorithms were negotiated with the server (udmg_sftp_read_algos and udmg_sftp_write_algos. This confirms that the legacy cipher was used.

This is also displayed in the Transfers Dashboard:

...

Versions Compared

Old Version 3

New Version 4

Key