...
Component
Universal Connector
----
UNV6856E Missing job step.
Description
A job step was not defined for the job.
Severity
Error
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV6857E Error initializing local Broker interface: func, errno, reason
Description
An error occurred initializing the interface to the local Universal <->
Broker. The manager communicates with the local Broker to register with it and to obtain its configuration data. The function func failed with an error code of errno, which is described by reason.
Severity
Error
System Action
The process terminates.
User Action
Check that a local Broker is running on the same system as the manager. If a Broker is not running, one must be started prior to starting the manager. Contact Stonebranch Customer Support is assistance is needed.
Component
Universal Connector
----
UNV6858E Error recording process exit code: func, errno, reason
Description
An error occurred recording the manager process exit code for local Broker monitoring. The function func failed with an error code of errno, which is described by reason.
Severity
Error
System Action
The manager terminates. The local Broker shall detect that the manager ended, but it will not know the manager exit conditions.
User Action
On UNIX, the process lock file (PLF) used by the manager may have been corrupted or removed. Although the condition cannot be recovered, the cause of the problem should be determined to prevent it from reoccurring. Contact Stonebranch Customer Support is assistance is needed.
Component
Universal Connector
----
UNV6859E Error registering with local Broker: func, errno, reason
Description
An error occurred registering with the local Universal Broker. The registration process is required for the manager to obtain its configuration data from the local Broker. The function func failed with an error code of errno, which is described by reason.
Severity
Error
System Action
The manager terminates.
User Action
Check that a local Broker is running on the same system as the manager. If a Broker is not running, one must be started prior to starting the manager. Contact Stonebranch Customer Support is assistance is needed.
Component
Universal Connector
----
UNV6860E Error establishing local broker session: func, errno, reason
Description
An error occurred establishing a communication session with the local broker. The function that failed is identified by field 'func'. Field p>errno is the error number, and field reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support if unable to identify and resolve the problem.
Component
Universal Connector
----
UNV6861E Error initializing local Broker interface using system ID 'sid': func, errno, reason
Description
An error occurred initializing the interface to the local Universal Broker using system identifier sid. The manager communicates with the local Broker to register with it and to obtain its configuration data. The function func failed with an error code of errno, which is described by reason.
Severity
Error
System Action
The process terminates.
User Action
Check that a local Broker is running with the appropriate system ID on the same system as the manager. If a Broker is not running, one must be started prior to starting the manager. Contact Stonebranch Customer Support is assistance is needed.
Component
Universal Connector
----
UNV6862I Universal Connector component cid registered with local Broker 'sid'.
Description
The connector has successfully registered with the local Broker. The connector has been assigned component ID cid by the Broker. If multiple Brokers are supported by the O/S, the system ID of the Broker is identified by sid.
Severity
Informational
System Action
Processing continues.
User Action
None required.
Component
Universal Connector
----
UNV6863A Configuration information:
Description
A header that precedes the display of configuration options in effect for the Universal Connector.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV6864A config options:
Description
A header that precedes the display of specific configuration options in effect for the Universal Connector. config is the category of options being displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV6865A System identifier: sid
Description
Displays the system identifier of the local Broker to which the connecter will register.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV6866A Broker interface file directory: bifdir
Description
Displays the directory in which the connector searches for the local broker interface file.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV6867A Process lock file directory: bifdir
Description
Displays the directory in which the connector creates its process lock file used by the local Broker to monitor the connector.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV6868E \[Line: lineNum\] Invalid assignment; missing parameter keyword.
Description
An assignment operator was read before reading a valid keyword. The error was detected on line linenum.
Severity
Error
System Action
The program continues parsing the file to detect any additional syntax errors. A successful compilation is no longer possible.
User Action
Check for additional messages issued by Universal Connector. Determine the cause of the syntax error, make proper adjustments, and reissue the command.
Component
Universal Connector
----
UNV6869E \[Line: lineNum\] 'identifier'Unknown identifier.
Description
Identifier is not recognized as a valid keyword for the current scope. The error was detected on line linenum.
Severity
Error
System Action
The program continues parsing the file to detect any additional syntax errors. A successful compilation is no longer possible.
User Action
Check for additional messages issued by Universal Connector. Determine the cause of the syntax error, make proper adjustments, and reissue the command.
Component
Universal Connector
----
UNV6870E \[Line: lineNum\] Missing parameter assignments.
Description
A statement terminator was detected before required parameter assignments were read. The error was detected on line lineNum.
Severity
Error
System Action
The program continues parsing the file to detect any additional syntax errors. A successful compilation is no longer possible.
User Action
Check for additional messages issued by Universal Connector. Determine the cause of the syntax error, make proper adjustments, and reissue the command.
Component
Universal Connector
----
UNV6871E \[Line: lineNum\] Expected required keyword 'keyword'.
Description
Keyword is required in this type of statement. The error was detected on line lineNum.
Severity
Error
System Action
The program continues parsing the file to detect any additional syntax errors. A successful compilation is no longer possible.
User Action
Check for additional messages issued by Universal Connector. Determine the cause of the syntax error, make proper adjustments, and reissue the command.
Component
Universal Connector
----
UNV6872E \[Line: lineNum\] Unknown symbol 'symbol'.
Description
Symbol is not defined for use in Universal Connector job definition files. If this was intended as the value portion of a parameter assignment, it must be enclosed in quotation marks. The error was detected on line lineNum.
Severity
Error
System Action
The program continues parsing the file to detect any additional syntax errors. A successful compilation is no longer possible.
User Action
Check for additional messages issued by Universal Connector. Determine the cause of the syntax error, make proper adjustments, and reissue the command.
Component
Universal Connector
----
UNV6873E \[Line: lineNum\] Unexpected 'token-type' value 'value'.
Description
A token of type token-type was not expected at this time.
token-type violates the syntax of the statement. The error was detected on line lineNum.
Severity
Error
System Action
The program continues parsing the file to detect any additional syntax errors. A successful compilation is no longer possible.
User Action
Check for additional messages issued by Universal Connector. Determine the cause of the syntax error, make proper adjustments, and reissue the command.
Component
Universal Connector
----
UNV6874E \[Line: lineNum\] Unexpected statement terminator.
Description
A statement terminator was read before the syntax of the current statement was satisfied. The error was detected on line lineNum.
Severity
Error
System Action
The program continues parsing the file to detect any additional syntax errors. A successful compilation is no longer possible.
User Action
Check for additional messages issued by Universal Connector. Determine the cause of the syntax error, make proper adjustments, and reissue the command.
Component
Universal Connector
----
UNV6875E \[Line: lineNum\] Invalid token type for current scope: Scope(scope), Type(type), Token(token).
Description
A statement terminator was read before the syntax of the current statement was satisfied. The error was detected on line lineNum.
Severity
Error
System Action
The program continues parsing the file to detect any additional syntax errors. A successful compilation is no longer possible.
User Action
Check for additional messages issued by Universal Connector. Determine the cause of the syntax error, make proper adjustments, and reissue the command.
Component
Universal Connector
----
UNV6876E \[Line: lineNum\] Missing pre-requisite statement.
Description
The statement being defined on line lineNum has pre-requisites that were not defined.
Severity
Error
System Action
The program continues parsing the file to detect any additional syntax errors. A successful compilation is no longer possible.
User Action
Check for additional messages issued by Universal Connector. Determine the cause of the syntax error, make proper adjustments, and reissue the command.
Component
Universal Connector
----
UNV6877E Missing assignment handler for parameter parm in function block funcBlock.
Description
An internal error has occurred. An unknown parameter type is trying to assign its value to the function block parameter list. parm is the parameter for which there is no assignment handler and funcBlock is the function block that the parameter is trying to assign its value to.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support.
Component
Universal Connector
----
UNV6878E \[Line: lineNum\] Keyword: Invalid keyword for statement type.
Description
While processing the statement, keyword was found which does not belong to the statement keyword set. Keyword belongs to the keyword set for another statement type. The error was detected on line lineNum.
Severity
Error
System Action
The program continues parsing the file to detect any additional syntax errors. A successful compilation is no longer possible.
User Action
Check for additional messages issued by Universal Connector. Determine the cause of the syntax error, make proper adjustments, and reissue the command.
Component
Universal Connector
----
UNV6879E Cannot access nls directory 'dir': reason
Description
The nls directory, whose entire path is specified by dir, could not be accessed. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
The program expects to find a 'nls' subdirectory immediately below the main Universal Connector installation directory. Make sure the directory exists and the user account running the usap program has access to this directory. If the directory does not exist, re-install Universal Connector.
Component
Universal Connector
----
UNV6880E Open failed for job definition file 'filename': reason
Description
The job definition file specified by the -run, -sub, or -mod parameters could not be opened. filename is the name of the job definition file. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the specified file exists, and is in a location accessible to the user account running Universal Connector.
Component
Universal Connector
----
UNV6881E Missing required value for cmdOpt.
Description
No value was specified for cmdOpt on the command line or command file. cmdOpt requires a value to perform the given command.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. Add all required values to the command and reissue the command.
Component
Universal Connector
----
UNV6882E Installation directory is not defined.
Description
The program could not find the installation_directory entry in the Universal Connector configuration file, or the installation_directory entry has no value associated with it.
Severity
Error
System Action
The program terminates.
User Action
Make sure there is an installation_directory entry in the Universal Connector configuration file. If the entry does not exist, <->
add it. Set its value to the directory where USAP Connector is installed. Reinstall the program if necessary. Windows NT/2000 users: This entry can be found in the registry under the key HKEY_LOCAL_MACHINE\Software\Stonebranch\usap connector. Use the registry editor (regedit.exe) to view the registry.
Component
Universal Connector
----
UNV6883E Error obtaining user ID: func reason
Description
The user ID was not specified in the execution parameters supplied to Universal Connector, and the request to obtain it was not successful. func is the name of the function in which the error occurred. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support if unable to identify and resolve the problem.
Component
Universal Connector
----
UNV6884E Error obtaining password: func) reason
Description
The password was not specified in the execution parameters supplied to Universal Connector, and the request to obtain it was not successful. func is the name of the function in which the error occurred. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support if unable to identify and resolve the problem.
Component
Universal Connector
----
UNV6885E Cannot access installation directory 'dir': reason
Description
The installation directory identified by dir could not be accessed. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Check the value of the installation_directory entry in the Universal Connector configuration file. Make sure the directory exists <->
and the user account running the usap program has sufficient access to that directory. Re-install USAP Connector if necessary.
Windows NT/2000 users: This entry can be found in the registry under the key HKEY_LOCAL_MACHINE\Software\Stonebranch\usap connector. Use the registry editor (regedit.exe) to view the registry.
Component
Universal Connector
----
UNV6886A User ID: userid
Description
Displays the SAP user ID with which to logon to the SAP system.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV6887A Language: lang
Description
Displays the language in which messages are displayed. lang is the language.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV6888A Trace table size: size, print condition: cond
Description
Displays the size of the memory trace table in bytes and the conditions under which the trace table is printed when the program ends.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV6889A Command file: file
Description
Displays the name of a plain text command file.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV6890A Encrypted command file: file
Description
Displays the name of an encrypted command file.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV6891A Encryption key: file
Description
Displays the key used to encrypt the command file.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV6892A Issuing command: cmd
Description
Displays a command that will be issued.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV6893I PeopleSoft system returned message id msgId and exited with status code statusCode
Description
The UPPS command was successfully submitted, but some backend errors occurred on the PeopleSoft system. msgId and statusCode are the message id and status code, respectively, returned by the PeopleSoft system.
Severity
Informational
System Action
The program continues.
User Action
Try using the application level retry options to retry on the message id. If the problem persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV6894I Message id matches. Retry will occur in retryInterval seconds.
Description
The current web service call has failed with an application level error that is considered retryable based on the matching message id. The next attempt will be made in retryInterval seconds.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector