If you are upgrading an installation of UDMG from any release prior to 1.3.0.0, you must uninstall the older version before installing the new version.
The binaries, services, configuration parameters, and environment variables have changed and this does not allow for a standard upgrade.

It may be required to modify the work and data directories ownership or access rights and to update UDMG Server transfer rules to use new paths.

The configuration files must be reviewed and compared between the old and new versions.

Special attention is required for the AESpassphrase parameter for UDMG Server. It must be the path for the file that was used by the previous release and must be accessible by the new service user. It is recommended to set an absolute path in the configuration file.

C:\UDMG\UDMG Server>udmg-server migrate /?
Usage:
  udmg-server [OPTIONS] migrate [migrate-OPTIONS] [version]

Help Options:
  /?                Show this help message
  /h, /help         Show this help message

[migrate command options]
      /c, /config:  The configuration file to use
      /d, /dry-run  Simulate the migration but does not commit the changes
      /l, /list     List Migrations
      /f, /file:    Writes the migration commands into a file instead of sending them to the database
      /v, /verbose  Show verbose debug information. Can be repeated to increase verbosity

[migrate command arguments]
  version:           The version to which the database should be migrated

C:\UDMG\UDMG Server>udmg-server migrate /c "C:\UDMG\UDMG Server\server.ini" /list 
0.7.1
0.7.1-sb.1
0.7.1-sb.2
0.7.1-sb.3
1.3.0

C:\UDMG\UDMG Server>udmg-server migrate /c "C:\UDMG\UDMG Server\server.ini" /v /v /v 1.3.0.0
[INFO ] Migration: Starting upgrade migration...
[INFO ] Migration: Applying migration 'Fix the 'sb_generic_group_join' table foreign keys'
[INFO ] Migration: Applying migration 'Fix the 'sb_user_group_member' table foreign keys'
[INFO ] Migration: Applying migration 'Fix the 'sb_user_group_permission' table foreign keys'
[INFO ] Migration: Applying migration 'Bump database version to 0.7.1-sb.2'
[INFO ] Migration: Applying migration 'Add description under 'local_agents' and 'remote_accounts''
[INFO ] Migration: Applying migration 'Add a 'revoked' column to the 'crypto_credentials' table'
[INFO ] Migration: Applying migration 'Bump database version to 0.7.1-sb.3'
[INFO ] Migration: Applying migration 'Add a 'email' column to the 'users' table'
[INFO ] Migration: Applying migration 'Create the 'access_token' table'
[INFO ] Migration: Applying migration 'Bump database version to 1.3.0'

C:\UDMG\nginx\udmg> tar -x -f udmg_admin_ui-<version>.zip

C:\>curl.exe http://localhost:80 -I
HTTP/1.1 200 OK
Server: nginx/1.23.0
Date: Thu, 07 Jul 2022 17:53:09 GMT
Content-Type: text/html
Content-Length: 7788
Last-Modified: Fri, 01 Jul 2022 13:58:15 GMT
Connection: keep-alive
ETag: "62befd77-1e6c"
Accept-Ranges: bytes

The lines starting with a colon ';' or a hash '#' are comments, describing the option or showing the default value.

The parameters must be adapted to your environment, in particular:

• global: GatewayHome
• log: LogLevel, LogTo, LogPath
• admin: Host, Port
• database: Type, Address, Name, User, Password

[global]
; The name given to identify this UDMG Server instance. If the the database is shared between multiple servers, this name MUST be unique across these servers.
GatewayName = udmg

; Default OS permission for created files
; FilePermissions = 700

; Default OS permission for created directories
; DirPermissions = 750

[paths]
; The root directory of the UDMG Server. By default, it is the working directory of the process.
; GatewayHome = "C:\UDMG\UDMG Server"

; The directory for all incoming files.
; DefaultInDir = in

; The directory for all outgoing files.
; DefaultOutDir = out

; The directory for all running transfer files.
; DefaultTmpDir = tmp

[log]
; All messages with a severity above this level will be logged. Possible values are DEBUG, INFO, WARNING, ERROR and CRITICAL.
Level = DEBUG

; The path to the file where the logs must be written. Special values 'stdout' and 'syslog' log respectively to the standard output and to the syslog daemon
; LogTo = stdout

; If LogTo is set on 'syslog', the logs will be written to this facility.
; SyslogFacility = local0

; The directory for the log files of the local servers, partners, and transfers. No default, if not provided then the detailled log feature is disabled.
; LogPath = "C:\UDMG\UDMG Server\logs"

[admin]
; The address used by the admin interface.
Host = 0.0.0.0

; The port used by the admin interface. If the port is 0, a free port will automatically be chosen.
Port = 18080

; Path of the TLS certificate for the admin interface.
; TLSCert =

; Path of the key of the TLS certificate.
; TLSKey =


; API rate limiter: number of allowed requests per client IP, per second. After that HTTP code 429 is returned. Disabled if 0 or not provided.
; RateLimit = 0

[database]
; Name of the RDBMS used for the UDMG Server database. Possible values: sqlite, mysql, postgresql
Type = postgresql

; Address of the database
Address = localhost

; The name of the database
Name = udmg

; The name of the database user
User = udmg_user

; The password of the database user
Password = udmg_password

; Path of the database TLS certificate file.
; TLSCert =

; Path of the key of the TLS certificate file.
; TLSKey =

; The path to the file containing the passphrase used to encrypt account passwords using AES
; AESPassphrase = passphrase.aes


[controller]
; The frequency at which the database will be probed for new transfers
; Delay = 5s

; The maximum number of concurrent incoming transfers allowed on the UDMG Server (0 = unlimited).
; MaxTransferIn = 0

; The maximum number of concurrent outgoing transfers allowed on the UDMG Server (0 = unlimited).
; MaxTransferOut = 0

[sftp]
; Set to true to allow legacy and weak cipher algorithms: 3des-cbc, aes128-cbc, arcfour, arcfour128, arcfour256
; AllowLegacyCiphers = false

AESPassphrase file is generated on first run if it does not exist.

Make sure to set verify the file location during upgrade and to have a backup. Without the correct AESPassphrase file, the passwords, the keys and the certificates will not be usable.

# Proxy Configuration
[proxy]
# Port, default "5000"
port = "5000"
# Network interface, default "0.0.0.0"
inet = "127.0.0.1"
# Enable recover on panic, default true, should be true for production environment
recover = true
# Enable Cross-Origin Resource Sharing (CORS), should be true for production environment
cors = true
# CORS: List of origins that may access the resource. Optional. Default value "*"
# domain = "*"
# Enable Request Track ID, default true
tracker = true
# Enable Request Logger, default true
logger = true
# Rate Limit IP Request over 1 second, default 0 (unlimited)
limit = 0
# Enable the Prometheus Metric Endpoint '/metric', default false
metrics = false
# Enable CSRF token
csrf = false
# Service 'local' with direct authentication on the UDMG Server
[service.local]
# UDMG Server Listen Protocol
protocol = "http"
[[service.local.targets]]
# UDMG Server Hostname or IP
hostname = "localhost"
# UDMG Server Port
port = 18080

# ssh-keygen -t rsa -q -N "" -f "C:\UDMG\UDMG Agent\agent_key"
# ssh-keygen -t rsa -q -N "" -f "C:\UDMG\UDMG Agent\client_key"

[agent]
# Listen IP Address
hostname = "0.0.0.0"
# Listen Port
port = "2222"
# SSH Priv Key
ssh_key = "C:\UDMG\UDMG Agent\agent_key"
# SSH Public Key
ssh_key_pub = "C:\UDMG\UDMG Agent\agent_key.pub"

# Service User
username = "mft"
# Service Password
password = "61ee8b5601a84d5154387578466c8998848ba089"

[client]
# UDMG Agent Proxy Hostname or IP
hostname = "localhost"
# UDMG Server Port
port = 18080

id: NGINX
name: NGINX Service
description: Runs the nginx.exe as a service
executable: C:\UDMG\nginx\nginx.exe
stopexecutable: C:\UDMG\nginx\nginx-stop.cmd
logpath: C:\UDMG\nginx\logs
logmode: roll

@echo off

cd /D %~dp0

if not exist logs\nginx.pid GOTO skip
nginx.exe -s quit
del logs\nginx.pid

:skip

taskkill /f /IM nginx.exe

C:\UDMG\nginx>nginx-service.exe install
2022-10-07 10:20:20,724 INFO - Installing service 'NGINX Service (NGINX)'...
2022-10-07 10:20:20,777 INFO - Service 'NGINX Service (NGINX)' was installed successfully.

C:\UDMG\nginx>nginx-service.exe status
Stopped

C:\UDMG\nginx>nginx-service.exe start
2022-10-07 10:20:40,213 INFO - Starting service 'NGINX Service (NGINX)'...
2022-10-07 10:20:41,327 INFO - Service 'NGINX Service (NGINX)' started successfully.

C:\UDMG\nginx>nginx-service.exe status
Started

id: UDMG Server
name: UDMG Server
description: UDMG Server
executable: C:\UDMG\UDMG Server\udmg-server.exe
startArguments: server -c "C:\UDMG\UDMG Server\server.ini"
workingdirectory: C:\UDMG\UDMG Server
priority: Normal

## UDMG server service configuration
##
## references:
## https://github.com/winsw/winsw/blob/v2.11.0/doc/yamlConfigFile.md
## https://github.com/winsw/winsw/blob/v2.11.0/examples/sample-allOption.yml

id: UDMG Server
name: UDMG Server
description: UDMG Server

## SECTION: Installation
## These options are being used during the installation only.
## Their modification will not take affect without the service re-installation.
##
## service account can be given during the installation with /p parameter
## waarp-gatewayd-service-user.exe install /p
## and then providing username
onFailure:
-
action: restart
delay: 10 sec
-
action: restart
delay: 60 sec
-
action: none
#resetFailure: 01:00:00

## SECTION: Executable management
executable: C:\UDMG\UDMG Server\udmg-server.exe
startArguments: >
server
-c "C:\UDMG\UDMG Server\server.ini"
workingdirectory: C:\UDMG\UDMG Server
priority: Normal

#stopTimeout: 15 sec
#stopParentProcessFirst: true

## SECTION: Service management
#startMode: Automatic
#delayedAutoStart: true

## SECTION:Logging
## Note: disabled due to WinSW bug https://github.com/winsw/winsw/issues/1016
#log:
# mode: roll-by-size-time
# sizeThreshold: 10240
# keepFiles: 8
# pattern: yyyyMMdd
# autoRollAtTime: 00:00:00

## SECTION: Environment setup

## SECTION: Extensions
## This configuration section allows specifying custom extensions.
## More info is available here: https://github.com/kohsuke/winsw/blob/v2.11.0/doc/extensions/extensions.md

The rollover of the service log file is disabled as it causes a bug of the WinSW application, see https://github.com/winsw/winsw/issues/1016.