UNV2500-UNV2599
- Former user (Deleted)
- Stonebranch (Deactivated)
----
UNV2500A Trailing spaces: opt
Description
Displays the stdin trailing spaces option value. The value, opt, is either yes or no. A value of yes indicates that for sequential files with a fixed record format, the complete record is read including all spaces at the end of the record. A value of no indicates that the record is truncated after the last non-space character.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2501W Error receiving COMPLETED message: func, errno, reason
Description
Universal Command Manager was unable to receive a message from Universal Command Server indicating the completion of the server processing. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Warning
System Action
The program continues processing.
User Action
Make sure a network connection is still available between the client and server machines. Check the Universal Broker message log for any errors reported by Universal Command Server. If the problem persists, contact Stonebranch customer support.
Component
Universal Command
----
UNV2502I Ucmd Server with matching command ID is pending completion. Retry in num seconds.
Description
The Universal Command Server cannot be started because another server with the same command ID has not completed. The server is in the final stages of termination. An attempt to start the component will be made every num seconds.
Severity
Informational
System Action
The program continues, attempting to start the component every num seconds.
User Action
Allow the program to run, waiting for the other component to finish so the one waiting can start.
Component
Universal Command
----
UNV2503E Command ID is required for manager fault tolerance.
Description
The command ID is a required option for the manager fault tolerant feature.
Severity
Error
System Action
The program terminates.
User Action
Either specify a command ID to identify the manager and server or turn off the manager fault tolerant option.
Component
Universal Command
----
UNV2504E Manager fault tolerance is required for manager restart.
Description
The manager fault tolerance feature must be enabled for a manager restart.
Severity
Error
System Action
The program terminates.
User Action
Either enable manager fault tolerance or do not specify restart.
Component
Universal Command
----
UNV2505A Manager fault tolerant: option, safe mode: safemode
Description
Specifies whether or not this instance of Universal Command Manager is using the manager fault tolerant feature. option and safemode values are either "no" or "yes". When option and safemode are both "yes", multiple hosts may not be specified for the '-host' option. If option is "no", the value specified for safemode is ignored.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2506E Manager fault tolerance is required for spooling.
Description
The manager fault tolerance feature must be enabled before the request to spool standard input and output can be processed.
Severity
Error
System Action
The program terminates.
User Action
Either enable manager fault tolerance, or remove the request to spool standard I/O.
Component
Universal Command
----
UNV2507E Cannot force complete a non-PENDING Universal Command Server.
Description
The manager was executed with the force complete option. The force complete option can be applied to PENDING servers only.
Severity
Error
System Action
The program terminates.
User Action
The server must be terminated first with Universal Control.
Component
Universal Command
----
UNV2508I Universal Command Server was successfully forced to completion.
Description
The manager was executed with the FORCE_COMPLETE option. The server was successfully changed from PENDING to COMPLETE.
Severity
Informational
System Action
None.
User Action
None.
Component
Universal Command
----
UNV2509E Error renegotiating sessname session options: func, errno, reason
Description
The manager is attempting to reestablish network connections after a network fault was detected. A connection was reestablished, but the manager and server were not able to renegotiate session options. Renegotiation was taking place for the sessname session. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation the error.
Severity
Error
System Action
If the error was due to a network fault, connection recovery starts over. If the error was not due to a network fault, the program terminates.
User Action
Make sure a network connection is available between the UCMD Manager and Universal Broker machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Command
----
UNV2510I stdfile: Protocol=protocol, Kx=keyex, Au=auth, Enc=enc, Mac=mac
Description
Displays network protocol properties for a standard file. stdfile is the name of the standard file, either "stdin", "stdout", or "stderr". The protocol name is indicated by protocol. Possible values are UNVv2 for the Universal version 2 protocol, SSLv3 for SSL version 3 protocol, or TLSv1/SSL for TLS version 1 of the SSL protocol. The value keyex specifies the key exchange method, value auth specifies the peer authentication method used, enc specifies the data encryption method used, and mac specifies the data authentication method used.
Severity
Informational
System Action
None
User Action
None required.
Component
Universal Command
----
UNV2511I stdfile: Port=port, Compression=cmpr, NFT=nft, Mode=mode
Description
Displays session properties for a standard file redirection. stdfile is the name of the standard file, either "stdin", "stdout", or "stderr". The value port specifies the TCP/IP port number assigned to this connection. The value cmpr specifies the compression method, value nft specifies whether or not the session is using the Network Fault Tolerant protocol, value mode specifies the data translation mode.
Severity
Informational
System Action
None
User Action
None required.
Component
Universal Command
----
UNV2512I stdfile: Network Byte Count=netcount, File Byte Count=filecount
Description
Displays I/O statistics for a standard file. stdfile is the name of the standard file, either "stdin", "stdout", or "stderr". The value netcount specifies the number of bytes sent over the network. The value filecount specifies the number of bytes either read or written to the file stdfile.
Severity
Informational
System Action
None
User Action
None required.
Component
Universal Command
----
UNV2513E Both certificate name and private key name are required.
Description
Both the certificate name and private key name associated with the certificate's public key are required. One cannot be specified without the other.
Severity
Error
System Action
The program terminates.
User Action
Specify either both options or neither.
Component
Universal Command
----
UNV2514E Error reading RSA private key file 'filename': func, errno, reason
Description
An error occurred reading the Manager's RSA private key from file filename. The function that encountered the error was func. The error is described by the error number errno and error reason reason.
Severity
Error
System Action
The program terminates.
User Action
Correct the condition that caused the error. If the condition cannot be determined, contact Stonebranch Customer Support.
Component
Universal Command
----
UNV2515E Error reading certificate file 'filename': func, errno, reason
Description
An error occurred reading the Manager's X.509 certificate from file filename. The function that encountered the error was func. The error is described by the error number errno and error reason reason.
Severity
Error
System Action
The program terminates.
User Action
Correct the condition that caused the error. If the condition cannot be determined, contact Stonebranch Customer Support.
Component
Universal Command
----
UNV2516E Broker certificate verification failed.
Description
The Broker certificate did not meet the certificate verification options.
Severity
Error
System Action
The current connection to the peer is terminated.
User Action
Possible conditions that may cause this problems is (1) connected to the wrong Broker, (2) the Broker's certificate has been compromised, (3) the wrong Broker name was used on the Manager's verify option.
Component
Universal Command
----
UNV2517E Error in certificate match function for post-verification: func, errno, reason
Description
An error occurred matching a peer's certificate to the post-verification criteria. The function that encountered the error was func. The error is described by the error number errno and error reason reason.
Severity
Error
System Action
The current connection to the peer is terminated.
User Action
If the condition cannot be determined, contact Stonebranch Customer Support.
Component
Universal Command
----
UNV2518E A CA certificate list is required in order to specify a certificate verify option.
Description
A CA certificate list was not specified. Consequentially, a peer certificate cannot be verified as authentic or accurate. In order for any of the certificate verify options to be reliable, the certificate must be authenticated with a CA certificate.
Severity
Error
System Action
The program terminates.
User Action
Specify a CA certificate list or remote the certificate verify options.
Component
Universal Command
----
UNV2519E Error translating the certificate verification data into an internal format: func, errno, reason
Description
The certificate verification data is converted into an internal format suitable for efficient certificate comparisons. A error occurred in the conversion process. The function that encountered the error was func. The error is described by the error number errno and error reason reason.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch Customer Support to help resolve the error condition.
Component
Universal Command
----
UNV2520E Cannot access the temp directory 'dir': reason
Description
The temp directory identified by dir could not be accessed. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Verify the temp directory configuration option specifies an existing directory that the user account which the Universal Command Server executes has proper security access.
Component
Universal Command
----
UNV2521E ERROR IN MODULE UCMSR000 - RC='rtnc' RC2='rsnc'
Description
Error in UCMSR000 while establishing the address space resource manager. The return code, rtnc, and reason code, rsnc, provide information for Stonebranch Customer Support to diagnose the problem.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch Customer Support.
Component
Universal Command
----
UNV2525A Script type: type
Description
Displays the type of script file specified with the script option.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2526A Command type: type
Description
Displays the type of command specified with the command option.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2527A Trace table size: size, print condition: cond
Description
Displays the size of the memory trace table in bytes and the conditions under which the trace table is printed when the program ends.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2528A Force complete: value
Description
Displays the force complete option value.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2529A Control session SSL cipher list: ciphers
Description
Displays the SSL cipher suite list for the control session.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2530A Data session SSL cipher list: ciphers
Description
Displays the SSL cipher suite list for the data sessions.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2531A Default SSL cipher: cipher
Description
Displays the default SSL cipher suite used when encryption is not requested.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2532A CA certificates: path
Description
Displays the location of the X.509 Certificate Authority (CA) certificates.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2533A Certificate: path
Description
Displays the location of the X.509 certificate for the user executing the Manager.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2534A Verify Broker certificate host: hostname
Description
Displays the value of the Broker certificate verify host option.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2535A Verify Broker certificate serial number: hostname
Description
Displays the value of the Broker certificate verify serial number option.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2536A Private key: path
Description
Displays the location of the RSA private key that corresponds to the X.509 certificate for the user executing the Manager.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2537I Manager attached to PENDING server and is extracting spool files.
Description
Indicates that a Universal Command Manager was started in manager fault tolerant mode and attached to a Universal Command Server that had completed and pending a restarted. The manager will retrieve the spool files and exit code information.
Severity
Informational
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2538I Manager attached to ORPHANED or DISCONNECTED server and resumed processing.
Description
Indicates that a Universal Command Manager was started in manager fault tolerant mode and attached to a Universal Command Server that is currently executing. The manager will retrieve the spool files that have been produced thus far, and then continue processing as normal.
Severity
Informational
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2539I Manager fault tolerance active using command ID 'cmdid'.
Description
Indicates that a Universal Command Manager was started in manager fault tolerant mode using command identifier cmdid. The command identifier is used in possible future Manager restarts to identify the Server which to reattach and resume processing.
Severity
Informational
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2540I Forcing complete manager fault tolerant server.
Description
Indicates that a Universal Command Manager is requesting a Universal Command Server in PENDING state to go into COMPLETED state. No spool files will be retrieved nor the remove command's exit code.
Severity
Informational
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2541I Reconnection attempt count started.
Description
The manager is starting its reconnection attempt to the server to recover a lost network connection. This is the start of attempt number count.
Severity
Informational
System Action
The session recovery process continues.
User Action
No action required.
Component
Universal Command
----
UNV2542E Error stopping control session: reason
Description
An error occurred while the manager was stopping the control session. The reason for the error is described by reason.
Severity
Error
System Action
The program terminates.
User Action
A likely cause of the error is a network condition that prevented the manager and server from communicating. Check the operational status of the network. If the problem persists, contact Stonebranch customer support.
Component
Universal Command
----
UNV2543A Outbound IP: outboundIP
Description
Displays the outbound IP address that the Universal Command Manager will use for connecting to the remote system.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2544W Unable to obtain the exit status of process pid.
Description
Indicates that the Universal Command Server was not able to determine whether the remote process, identified by process id pid, ended or obtain the exit code if it did end. This condition may occur after a system or program halt that prevented the server and the user process from running to normal completion.
Severity
Warning
System Action
The Universal Command Manager will end with exit code 199.
User Action
The current state of the remote process must be determined manually. Attempt to determine where the process was in its processing steps by examining log files and stdout and stderr files. Restart the process if necessary.
Component
Universal Command
----
UNV2545E Possible broker access denial. Please review broker log file.
Description
Indicates that the failure condition encountered by the Universal Command Manager could be related to a Universal Broker access denial.
Severity
Error
System Action
The program terminates.
User Action
Review the Universal Broker log file and determine if the failure is due to a Universal Broker access denial.
Component
Universal Command
----
UNV2546W Universal Command Server ended prematurely due to a shutdown request.
Description
The Universal Command Server ended prematurely due to receiving a shutdown request, such as, a termination request from the Universal Command Manager or a stop request from Universal Enterprise Controller or Universal Control.
Severity
Warn
System Action
The Universal Command Manager exits with a non-zero exit code.
User Action
The Server ended prematurely. Even if the user process's exit code is zero, it is possible, depending on the type of operating system on which the Server is running, that stdio processing did not complete or child processes were terminated prematurely.
Component
Universal Command
----
UNV2547E Local system security has denied access to data sets allocated to ddname ddn.
Description
The user ID executing the UCMD program was denied access by the local system security (RACF, etc.) to a data set allocated to ddname ddn.
Severity
Error
System Action
The program terminates.
User Action
If appropriate, permit the user ID permission to the security resource that protects the requested operation. Refer to the local system security messages for additional information on the resource denial.
Component
Universal Command
----
UNV2548E Entering script options (OPTIONS) requires that a user also enter a script file (SRCFILE).
Description
STRUCM command error. The OPTIONS parameter provides options that are passed into the script contained in the script file. Either remove the options from the OPTIONS parameter or enter a script file name for the SRCFILE parameter.
Severity
Error
System Action
User is returned to STRUCM screen.
User Action
Provide the dependent parameter.
Component
Universal Command
----
UNV2549E Entering a RAS private key file name (PVTKEYF) requires that the user also provide a certificate file name (CERT).
Description
STRUCM command error. A RAS private key file requires a matching certification file. Either remove the PVTKEYF parameter or enter a certificates file name in the CERT parameter.
Severity
Error
System Action
User is returned to STRUCM screen.
User Action
Provide the dependent parameter.
Component
Universal Command
----
UNV2550E A private key password (PVTKEYPWD) requires an associated private key file name (PVTKEYF).
Description
STRUCM command error. A private key password (PVTKEYPWD) is invalid without an associated private key file name (PVTKEYF) entry. Either remove the PVTKEYPW entry or provide a PVTKEYF entry and try the command again.
Severity
Error
System Action
User is returned to STRUCM screen.
User Action
Provide the dependent parameter.
Component
Universal Command
----
UNV2551E The manager fault tolerance option (MANAGERFT) requires an associated command identifier (CMDID).
Description
STRUCM command error. The manager fault tolerance (MANAGERFT) option requires a command identifier (CMDID). Please provide the CMDID option and try the command again.
Severity
Error
System Action
User is returned to STRUCM screen.
User Action
Provide the dependent parameter.
Component
Universal Command
----
UNV2552E Restart previous manager (RESTART) option requires the manager fault tolerance (MANAGERFT) option.
Description
STRUCM command error. The restart manager (RESTART) option requires both the manager fault tolerance (MANAGERFT) option and the command identifier (CMDID). Please provide the MANAGERFT CMDID options and try the command again.
Severity
Error
System Action
User is returned to STRUCM screen.
User Action
Provide the dependent parameters.
Component
Universal Command
----
UNV2553E Command line exceeds maximum length of maxlen.
Description
A command line containing a REXX script is longer than the maximum supported line length of maxlen.
Severity
Error
System Action
The program terminates.
User Action
Update the script so that its length is less than maxlen.
Component
Universal Command
----
UNV2554I Entering a password requires that a user ID also be entered.
Description
STRUCM command error. If a password (PWD) is entered on the STRUCM screen, a user ID (USERID) is also required. Enter the user ID and try the command again.
Severity
Informational
System Action
User is returned to STRUCM screen.
User Action
Provide the dependent parameter.
Component
Universal Command
----
UNV2555A CRL location: path
Description
Displays the location of the X.509 CRL for the Manager.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2556E Missing SAF key ring name, which is required for system SSL.
Description
When the system implementation of SSL is specified, a SAF key ring name is required.
Severity
Error
System Action
The program terminates.
User Action
Specify a SAF key ring name to be used for the SSL digital certificate requirements.
Component
Universal Command
----
UNV2557A SSL implementation: impl
Description
Displays the SSL implementation used for the SSL network protocol.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2558E Error setting exit code translation map: func, errno, reason
Description
The mapping of exit codes reported by the user process executed by Universal Command Server, to values returned by Universal Command Manager, was not be built. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Correct the exit code map in the UCMD Manager's configuration, and try again. If the problem persists, contact Stonebranch customer support.
Component
Universal Command
----
UNV2559I Using an exit code map of map
Description
Displays the comma-delimited list used to translate user process return codes to UCMD Manager exit codes. map is the exit code translation map, in the format:
\[an\]range:exitcode\[,\[an\]range:exitcode,...,\[an\]range:exitcode\]
where
- '\[an\]' is the process's status, either (a)bnormal or (n)ormal,
- 'range' is the range of values returned by the user process. This may be a single value, a finite range of values separated by a '-', or an open-ended range of values less than (<) or greater than (>) the specified value (e.g., <0), and
- 'exitcode' is the value returned by UCMD Manager.
For example, the following exit code map: 1-5:4,n6-10:1,a6-10:2,>15:8,<20:12,*:16
is interpreted as follows:
- If the user process exits with a value of 1 thru 5, inclusive, the UCMD Manager exits with a value of 4
- If the user process ends normally with a value of 6 thru 10, inclusive, the UCMD Manager exits with a value of 1
- If the user process ends abnormally with a value of 6 thru 10, inclusive, the UCMD Manager exits with a value of 2
- If the user process ends with a value greater than 15, the UCMD Manager exits with a value of 8
- If the user process ends with a value less than 20, the UCMD Manager exits with a value of 12
- If the user process ends with any other value, the UCMD Manager exits with a value of 16
Severity
Informational
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2560I Using a command ID of cmdid
Description
cmdid is the command ID used to associate a UCMD Manager with a UCMD Server. The command ID may be defined by the user, automatically generated by Universal Command, or allowed to default to the specified command or script name.
Severity
Informational
System Action
None
User Action
None required.
Component
Universal Command
----
UNV2561E Error initializing local Broker interface: func, errno, reason
Description
An error occurred initializing the interface to the local Universal Broker. The manager communicates with the local Broker to register with it and to obtain its configuration data. The function func failed with an error code of errno, which is described by reason.
Severity
Error
System Action
The process terminates.
User Action
Check that a local Broker is running on the same system as the manager. If a Broker is not running, one must be started prior to starting the manager. Contact Stonebranch Customer Support is assistance is needed.
Component
Universal Command
----
UNV2562E Error recording process exit code: func, errno, reason
Description
An error occurred recording the manager process exit code for local Broker monitoring. The function func failed with an error code of errno, which is described by reason.
Severity
Error
System Action
The manager continues shutdown processing. The local Broker may or may not detect that the manager process ended depending on the platform.
User Action
On UNIX, the process lock file (PLF) used by the manager may have been corrupted or removed. Although the condition cannot be recovered, the cause of the problem should be determined to prevent it from reoccurring. On z/OS, the local Broker may not have been running when the manager ended. Contact Stonebranch Customer Support if assistance is needed.
Component
Universal Command
----
UNV2563E Error registering with local Broker: func, errno, reason
Description
An error occurred registering with the local Universal Broker. The registration process is required for the manager to obtain its configuration data from the local Broker. The function func failed with an error code of errno, which is described by reason.
Severity
Error
System Action
The manager terminates.
User Action
Check that a local Broker is running on the same system as the manager. If a Broker is not running, one must be started prior to starting the manager. Contact Stonebranch Customer Support is assistance is needed.
Component
Universal Command
----
UNV2564I Unable to start UCMD on ipaddr at port: func, errno, reason
Description
This message is issued when a UCMD Manager fails to send a UCMD Server START request to one of the locations specified in a list of hosts. ipaddr is the IP address of the system to which the START request was sent. port is the port number upon which the Universal Broker on that system is accepting incoming connections. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Informational
System Action
The UCMD Manager will attempt to send a UCMD Server START request to the other hosts in the list. The UCMD Manager will only fail after all hosts in the list have been tried.
User Action
If you believe one or more of these messages were issued in error, contact Stonebranch customer support. Otherwise, no action is required.
Component
Universal Command
----
UNV2565E Command IDs cannot be generated for MFT restart requests.
Description
A UCMD Manager with Manager Fault Tolerance was submitted, with the '-restart' command option set to "yes" or "auto" and the "-cmdid" option set to "*".
Severity
Error
System Action
The request to generate a command ID is rejected, and the Manager terminates. In situations where an actual MFT restart is requested (i.e., -restart=yes), the status of the UCMD Server component remains unchanged.
User Action
If the '-restart' command option is set to "auto", a static, well-known command ID must be supplied. This allows the UCMD Manager to automatically start a new UCMD Server component instance, or to perform a MFT restart with an existing UCMD Server, without requiring a change to the UCMD Manager command options.
For an actual MFT restart request (i.e., -restart=yes), the original command ID from the Manager's initial run must be supplied. Search the output from the original UCmd Manager to locate the value of the command ID. Update the UCmd Manager command parameters, setting the -cmdid value to this generated command ID. Resubmit the Manager.
Component
Universal Command
----
UNV2566E Multiple hosts may not be used with the specified MFT options.
Description
UCMD Manager issues this error whenever Manager Fault Tolerance is enabled, multiple hosts are specified for the '-host' option, and any one of the following is true:
- The MFT '-restart' option is set to "auto"
- The MFT '-restart' option is set to "yes"
- The MFT '-restart' option is set to "no", and the '-mft_safe_mode' option is set to "yes"
This validation minimizes the risk of during Manager restart attempts of starting a new UCMD Server instance on one system, while the UCMD Server on the original system awaits a Manager restart.
Note that multiple hosts do not necessarily have to be specified for the -host option to result in a list of hosts being built. If the -dns_expand option is set to "yes", and a single host name resolves to more than one IP address, UCMD Manager will build a host list using all IP addresses returned by the DNS.
Severity
Error
System Action
The request fails, and the Manager terminates.
User Action
Remove the '-restart' command option, set the value of the '-restart' and the '-mft_safe_mode' options to "no", or make sure there is only one host specified for the '-host' option (which may mean setting the '-dns_expand' option to "no". For restart attempts, the host specified must be the host the UCMD Manager originally connected to.
Component
Universal Command
----
UNV2567I Using method selection to connect to: list
Description
This message is displayed when a list of hosts is specified for the -host command option. method identifies the order in which the UCMD Manager will select the hosts in the list, either "sequential" or "random". list is the resolved, expanded, unique list of hosts.
Severity
Informational
System Action
The UCMD Manager will attempt to establish a connection with a Universal Broker running on one of the hosts listed.
User Action
None required.
Component
Universal Command
----
UNV2568A DNS expansion: expand, retry count: count
Description
Displays the options used to resolve host names specified with the -host command option. The DNS expansion option indicates whether UCMD Manager receives all IP addresses from the DNS for each host name specified. count specifies the number of attempts made to resolve each host name specified.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2569A Host selection: method, connect timeout: secs
Description
Displays the options used to select the first host from the list of hosts specified by the '-host' command option, and the amount of time UCMD Manager will wait to establish a connection to a Universal Broker on those hosts. Host selection continues until this connection is established, or until all the hosts in the list have been tried. method is either "sequential" or "random", and indicates whether connection attempts start with the first host listed or with one chosen at random. secs is the number of seconds UCMD Manager will wait for each connection attempt to complete.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2570I Connection to broker completed at ipaddr, port
Description
Displays the IP address and port number of the Broker that UCMD Manager connected to. This message is only displayed when more than one host is used for the -host option. ipaddr is the IP address and port is the port number.
Severity
Informational
System Action
A UCMD Server is started on the specified system.
User Action
If the UCMD Manager has host fault tolerance enabled and is terminated prior to successful completion, use the reported IP address and port to restart the Manager.
Component
Universal Command
----
UNV2571A System identifier: sid
Description
Displays the system identifier of the local Broker to which the manager will register.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2572A Broker interface file directory: bifdir
Description
Displays the directory in which the manager searches for the local broker interface file.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2573A Process lock file directory: bifdir
Description
Displays the directory in which the manager creates its process lock file used by the local Broker to monitor the manager.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2574E Error initializing local Broker interface using system ID 'sid': func, errno, reason
Description
An error occurred initializing the interface to the local Universal Broker using system identifier sid. The manager communicates with the local Broker to register with it and to obtain its configuration data. The function func failed with an error code of errno, which is described by reason.
Severity
Error
System Action
The process terminates.
User Action
Check that a local Broker is running with the appropriate system ID on the same system as the manager. If a Broker is not running, one must be started prior to starting the manager. Contact Stonebranch Customer Support is assistance is needed.
Component
Universal Command
----
UNV2575E Error in caller provided UUID: func, errno, reason
Description
The process and group UUID values provided by the calling process could not be successfully processed. An error was encountered by function func. The error number is errno and a description of the error is reason.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support if unable to identify and resolve the problem.
Component
Universal Command
----
UNV2576E Error processing MGR_UPDATE message in func: (errno) reason
Description
An error occurred while processing the MGR_UPDATE message. The MGR_UPDATE message is part of the manager and broker protocol used to update the manager component information maintained by the broker. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the broker has not been restarted. If the problem persists, contact Stonebranch customer support.
Component
Universal Command
----
UNV2577I Waiting on input for stdin. Press seq to close stdin...
Description
The Universal Command manager process will attempt to spool all stdin when the manager fault tolerant option is used and stdin is not being redirected from a file. In this case, the process will read stdin until it encounters an end-of-file (EOF) sequence. In this situation, the user is responsible for supplying an EOF indicator, which is a platform-specific sequence of characters identified by seq.
Windows: If stdin is redirected from the null device (NUL), this message will be displayed, but it is not necessary to supply the EOF sequence. When Universal Command process begins reading stdin in this situation, the EOF sequence is the first thing read.
Severity
Informational
System Action
Program execution resumes once the EOF sequence is read.
User Action
Enter the EOF sequence specified in the message.
Windows: If stdin is redirected from the null device (NUL), it is not necessary to supply the EOF sequence. Although the message is displayed the Universal Command process immediately detects the EOF sequence, and program execution resumes. This is platform-dependent behavior, as Windows recognizes the null device as an interactive console device.
Component
Universal Command
----
UNV2578I Universal Command Manager component cid registered with local Broker 'sid'.
Description
The manager has successfully registered with the local Broker. The manager has been assigned component ID cid by the Broker. If multiple Brokers are supported by the O/S, the system ID of the Broker is identified by sid.
Severity
Informational
System Action
Processing continues.
User Action
None required.
Component
Universal Command
----
UNV2579E Failed in initial program execution (library, lib-name, and program, pgm-name) for user usr-name.
Description
Failed to either retrieve or execute an initial program. Library, lib-name, and program, pgm-name, identify the program set by the user profile. *N in any field indicates that the value could not be retrieved.
Severity
Error
System Action
The program terminates.
User Action
The initial program is only executed if LOGIN is set to YES and SECURITY is set to a value other than NONE. The ability to execute the initial program is supported for Universal Command 3.2.0 and later. Insure that the initial program specified in the user profile is valid.
Component
Universal Command
----
UNV2580E Failed retrieving job information for current job.
Description
INITIATOR requires current job information. An error occurred while attempting to retrieve the job information.
Severity
Error
System Action
The program terminates.
User Action
Rerun the job. If the problem persists, contact the system administrator to verify that the QUSRJOBI API allows *PUBLIC use. If the problem continues, contact Stonebranch customer support.
Component
Universal Command
----
UNV2581E Failed setting attributes for user profile usr-prf-name.
Description
An error occurred when setting runtime job attributes.
Severity
Error
System Action
The program terminates.
User Action
When LOGIN is YES and SECURITY is set to a value other than NONE or when a Universal Server configuration file setting specified setting a runtime job attribute, INITIATOR sets the appropriate runtime job attribute(s). An error occurred when setting one or more of these runtime job attributes.
Component
Universal Command
----
UNV2582I Remote command ended with mapped exit code exitcode.
Description
The remote command completed its processing and the exit code was mapped to exitcode. Mapped exit codes result in exception messages with a severity corresponding to the mapped exit code value. Exit codes greater than 99 are mapped to severity 99.
Severity
Informational
System Action
None
User Action
None required.
Component
Universal Command
----
UNV2583A Uencrypted Codepage: uenc_codepage
Description
Displays the codepage used by the UCMD command to translate data read from an encrypted command file. This value is only displayed if a uencrypted codepage is explicitly specified. uenc_codepage is the codepage used for the translation of the uencrypted command file.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command
----
UNV2584E Uencrypted Codepage codepage does not exist.
Description
The codepage specified for the UCMD command to translate data read from an encrypted command file does not exist. codepage is the specified codepage that does not exist.
Severity
Error
System Action
None.
User Action
Verify that the specified codepage exists.
Component
Universal Command
----
UNV2586I stdfile: Port=port, Compression=cmpr, NFT=nft
Description
Displays session properties for a standard file redirection. stdfile is the name of the standard file, either "stdin", "stdout", or "stderr". The value port specifies the TCP/IP port number assigned to this connection. The value cmpr specifies the compression method, value nft specifies whether or not the session is using the Network Fault Tolerant protocol.
Severity
Informational
System Action
None
User Action
None required.
Component
Universal Command
----
UNV2587E Attempt to create unencrypted control session denied: ipaddr, port, userid, workid
Description
The UCMD server is configured to require an encrypted control session. An attempt to establish a control session without encryption was attempted and denied by the UCMD server. The attempt was from a UCMD manager at IP address ipaddr and TCP port number port. The UCMD manager was executing with a user identifier of userid and work identifier of workid.
Severity
Error
System Action
The UCMD server rejects the work request form the manager and terminates the session.
User Action
Adjust the UCMD manager options to specify an encrypted control session protocol, or if an unencrypted control session is required, refer to the UCMD server ENCRYPTED_CONTROL_SESSION configuration option.
Component
Universal Command
----
UNV2588I Connection to Broker at ipaddr will be retrytxt in num seconds.
Description
The Universal Command component cannot be started because a connection to the Universal Broker at the location identified by ipaddr could be established. The value of retrytxt depends on the number of hosts specified for the -host option. If only one host is specified, the Universal Command Manager will retry the connection attempt in num seconds. If more than one host is specified, that host is eligible for retry after num seconds, as connections to the others hosts in the list are attempted.
Severity
Informational
System Action
The program continues, and attempts to connect to the remote Broker will be made every num seconds until the number of attempts exceeds the value set by the connect_retry_count configuration option.
User Action
Allow the program to retry the connection attempt until it reacheds the specified number of retries. If no connection attempt succeeds after all retry attempts are completed, verify the remote Broker is active and able to accept incoming connections or increase the values for the connect_retry_count and/or connect_retry_interval configuration options.
Component
Universal Command
----
UNV2589A Script line ignore mask: mask
Description
Displays the mask that is used to ignore lines from the specified script.Script lines that match the mask will be filtered out before being transfered to the server.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Command