Currently, IBM i runs Workload Automation 5.1.1. This page provides information for that version.

Introduction

This Universal Control (UCTL) Manager information is specific to the IBM i operating system.

Universal Control Manager for IBM i runs via a command interface. It provides a command line interface to remote computers running the UCTL Server. On the command line, you must specify the control request that you want the UCTL Manager to execute.

This page describes the the Universal Control Manager for IBM i command execution environments, control requests, configuration and configuration options, and command line syntax.

Workload Automation 5 for IBM i Commands

The names of the Workload Automation 5 for IBM i commands that are installed in the IBM i QSYS library are tagged with the Workload Automation 5 for IBM i version / release / modification number, 511. The names of the commands installed in the Workload Automation 5 for IBM i product library, UNVPRD511, are untagged.

To maintain consistency across releases, you may prefer to use the untagged names in your production environment. The Change Release Tag program, UCHGRLS, lets you change the tagged command names in QSYS to the untagged command names in UNVPRD511.

These pages reference the IBM i commands by their untagged names. If you are using commands with tagged names to run Universal Control, substitute the tagged names for the untagged names in these references.

Command Execution Environment

The command is valid in all environments:

Batch input streams
CL programs
REXX procedures
CL ILE modules
Interactive processing
Passed to the system program QCMDEXC (or QCAEXEC) for processing

Control Requests

UCTL Manager for IBM i supports all three Universal Control control requests:

Start (START_CMD option)
Stop (STOP_CMD option)
Refresh (REFRESH_CMD option)

Configuration

Configuration consists of:

Setting default options and preferences for all executions of UCTL Manager.
Setting options and preferences for a single execution of UCTL Manager.

Configuration Sources

UCTL Manager for IBM i configuration options are read from the following sources:

STRUCT parameters
Environment variables
Configuration file

The order of precedence is the same as the list above; STRUCT parameters being the highest, and configuration file being the lowest. That is, options specified via STRUCT parameters override options specified via environment variables, and so on.

Detailed information on these methods of configuration can be found in Configuration Management.

Configuration File

The configuration file, UNVPRD511/UNVCONF(UCTL), provides the simplest method of specifying configuration options whose values will not change with each command invocation. These default values are used if the options are not read from one or more other sources.

Some options only can be specified in the configuration file; they have no corresponding command line equivalent. Other options cannot be specified in the configuration file; they must be specified via one or more other sources for a single execution of UCTL Manager.

Configuration Options Categories

The following table categorizes configuration options used to execute Universal Control Manager for Windows into logical areas of application. Each Category name is a link to a table of options in that category. Each Option Name in those tables is a link to detailed information about that option.

Category	Description
Certificates	X.509 certificate related options.
Command	Control command to execute.
Events	Options used to define event generation.
Local	Options required for local broker registration.
Messages	Universal Control message options.
Miscellaneous	Options use to display command help and program versions.
Network	Options used to control the process of network data.
Options	Alternative methods to specify command options.
Remote	Network address of the remote system.
User	User account the Control command executes with on the remote system.

The Universal Control Manager command options for each of the categories listed above are summarized in the following tables.

Certificate Category Options

Option Name	Description
CA_CERTIFICATES	Location of the PEM-formatted trusted CA X.509 certificates.
CERTIFICATE	Location of Manager's PEM-formatted X.509 certificate.
CERTIFICATE_REVOCATION_LIST	Location of Manager's PEM-formatted CRL.
PRIVATE_KEY	Location of Manager's PEM-formatted RSA private key.
PRIVATE_KEY_PWD	Password for the Manager's PRIVATE_KEY.
VERIFY_HOST_NAME	Specification that the Universal Broker's X.509 certificate host name field must be verified.
VERIFY_SERIAL_NUMBER	Specification that the Universal Broker's X.509 certificate serial number field must be verified.

Command Category Options

Option Name	Description
COMMAND_ID	Identity of the started component.
REFRESH_CMD	Instruction to a Broker to refresh configuration data.
START_CMD	Instruction to a Universal Broker to start a component.
STOP_CMD	Instruction to stop a component being executed by a Broker.

Events Category Options

Option Name	Description
ACTIVITY_MONITORING	Specification for whether or not product activity monitoring events are generated.
EVENT_GENERATION	Events to be generated as persistent events.

Local Category Options

Option Name	Description
PLF_DIRECTORY	Program Lock File (PLF) directory where the program lock files are located.

Messages Category Options

Option Name	Description
MESSAGE_LANGUAGE	Language of messages written.
MESSAGE_LEVEL	Level of messages written.

Miscellaneous Category Options

Option Name	Description
VERSION	Write program version.

Network Category Options

Option Name	Description
CODE_PAGE	Code page used to translate text data to and from the network.
CTL_SSL_CIPHER_LIST	SSL/TLS cipher list for the control session.
MIN_SSL_PROTOCOL	Minimum SSL/TLS protocol level that will be negotiated and used for communications channels. Note This option was introduced to IBM i in version 5.1.1.0.
NETWORK_DELAY	Maximum number of seconds considered acceptable to wait for data communications.

Options Category Options

Option Name	Description
COMMAND_FILE_ENCRYPTED	Encrypted command file.
COMMAND_FILE_PLAIN	Plain text command file.
ENCRYPTION_KEY	Encryption key used to decrypt an encrypted command file specified by option COMMAND_FILE_ENCRYPTED.

Remote Category Options

Option Name	Description
HOSTNAME_RETRY_COUNT	Number of host connection attempts before ending with an error.
OUTBOUND_IP	Host or IP address to use for all outgoing IP connections.
REMOTE_HOST	TCP/IP host name of the remote Broker.
REMOTE_PORT	TCP/IP port number of the remote Broker.

User Category Options

Option Name	Description
USER_ID	User ID or account with which to execute the Control command.
USER_PASSWORD	Password associated with USER_ID.

Command Line Syntax

The syntax shows the CL Command parameter followed by UNIX/CALL options (in parentheses). These options would be used to invoke Universal Command Manager on a different platform. They are provided to help the user associate STRUCT command options with UCTL command line options on other platforms.

The following figure illustrates the command line syntax — using the STRUCT parameter form of the configuration options — of Universal Control Manager for Windows.

STRUCT
{ START(compname) [CMDID(id)] | STOP(compID) [USER(user) [PWD(password)] ] | REFRESH ({yes|no}) [RFSHCMPNM(compname)] }
HOST(hostaddress)
[CMDFILE(filename) [CMDMBR(member)] | ECMFILE(filename) [ECMMBR(member)] [KEY(key)] ]
[PORT(port)]
[CMDID(id)]
[HSTNMRTYCT(count)]
[OUTBOUNDIP(host)]
[MSGLANG(language)]
[MSGLEVEL(*{trace|audit|info|warn|error})]
[CACERTS(file [lib]) [VFYHSTNM({yes|no|hostname})] [VFYSERNUM(number)] ]
[CERT(file [lib]) PVTKEYF(file [lib]) [PVTKEYPWD(password)] ]
[CRLFILE(file [lib]) [CRLMBR(member)] ]
[CODEPAGE(codepage)]
[CTLCPHRLST(cipherlist)]
[MINSSLPROTOCOL(option)]
[DELAY(seconds)]
[PLFDIR(directory)]

STRUCT
VERSION(*{yes|no})

* The command file (CMDFILE or ECMFILE) can contain some or all required and/or optional configuration options, including a control request and HOST. If a command file is specified on the command line, and it contains the required control request and HOST options, those options do not have to be specified additionally on the command line.

Browser not supported