----

UNV5800A Spool Request Number: spoolreqnum

Description

Displays spool list request number of the job for which the spool list will be displayed.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5801I Profile profileid of type profiletype was successfully activated.

Description

Indicates that the profile specified by profileId of type profileType was successfully activated.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV5802E Failed to activate profile profileid of type profiletype: (msgNo) bapiStr

Description

An error occurred trying activate the specified profile. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5803I Profile profileid was successfully deactivated.

Description

Indicates that the profile specified by profileId was successfully deactivated.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV5804E Failed to deactivate profile of type profileType.

Description

An error occurred trying to deactivate the specified profile type. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5805E Failed to retrieve CM profiles for type profileType.

Description

An error occurred trying to retrieve profiles of the specified type. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5806I Profile profileid of type profiletype was successfully set.

Description

Indicates that the profile specified by profileId of type profileType was successfully set.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV5807E Failed to set profile: error.

Description

An error occurred trying set the specified profile. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5808E Open failed for CM criteria file 'filename': reason

Description

The CM criteria file 'filename' could not be opened. filename is the name of the CM criteria file. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Make sure the specified file exists, and is in a location accessible to the user account running Universal Connector.

Component

Universal Connector

----

UNV5809I Profile profileid of type profiletype was successfully created.

Description

Indicates that the profile specified by profileId of type profileType was successfully created.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV5810E Failed to create profile: (msgNo) bapiStr

Description

An error occurred trying create the specified profile. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5811E Display event history failed: (msgNo) bapiStr

Description

An error occurred retrieving the event history. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5812E Failed to delete profile profileid of type profiletype: (msgNo) bapiStr

Description

An error occurred trying to delete the specified profile. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5813E Failed to retrieve criteria for profile profileid of type profiletype: (msgNo) bapiStr

Description

An error occurred trying to retrieve the specified criteria. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5814I Profile profileid of type profiletype was successfully deleted.

Description

Indicates that the profile specified by profileId of type profileType was successfully deleted.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV5815I Profile profileid of type profiletype was successfully retrieved.

Description

Indicates that the profile specified by profileId of type profileType was successfully retrieved.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV5816A Event ID: eventid

Description

Displays the ID of the SAP background processing event that will be waited for.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5817I count events detected: eventID/eventParm. retrieved.

Description

Indicates that the specified number of events were detected.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV5818E Variant purge failed: (msgNo) bapiStr

Description

An error occurred trying to purge a variant from the SAP system. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

This most likely does not indicate an error in processing. It usually indicates the absence of the variant in the SAP system.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5819I Variant var was successfully purged for report rpt.

Description

Indicates that the variant deletion process completed successfully for variant var of report rpt.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV5820E Mutually exclusive SUBMIT parameters specified.

Description

One or more conflicting parameters have been specified for the SUBMIT command. Each command group has a specific set of options that are available to it.

Severity

Error

System Action

The program terminates.

User Action

Determine which SUBMIT parameters do not belong. Remove the conflicting command options and reissue the command.

Component

Universal Connector

----

UNV5821E Copy variant failed: (msgNo) bapiStr

Description

An error occurred while copying the variant. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5822A ABAP program name: abapname

Description

Displays the name of the ABAP program associated with the variant to be copied.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5823A Variant name: variantname

Description

Displays the name of the SAP variant that will be copied.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5824A Target variant name: variantname

Description

Displays the name that will be used for the newly created SAP variant.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5825A Process Chain ID mask: mask

Description

Displays the process chain ID mask to use for chain selection.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5826A Process Chain description mask: mask

Description

Displays the process chain description mask to use for chain selection.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5827E Process chain selection failed: (msgNo) bapiStr

Description

An error occurred in the process chain selection process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5828A Process Chain ID: chainid

Description

Displays the process chain ID.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5829E Get process chain start condition failed: (msgNo) bapiStr

Description

An error occurred retrieving the process chain start condition. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5830A Process Chain Log ID: chainid

Description

Displays the process chain Log ID.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5831E Get process chain processes failed: (msgNo) bapiStr

Description

An error occurred retrieving the process chain processes. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5832A Process chain ID: chainid

Description

Displays the name of the process chain for which the status will be displayed.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5833A Process chain log ID: logid

Description

Displays the process chain log ID for which the status will be displayed.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5834E Get process chain log: (msgNo) bapiStr

Description

An error occurred retrieving the process chain log. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5835A Process Type: processType

Description

Displays the process type.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5836A Process Variant: processVariant

Description

Displays the process variant.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5837A Process Instance: processInstance

Description

Displays the process instance.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5838A Job Count: jobcount

Description

Displays the job count.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5839E Get process log: (msgNo) bapiStr

Description

An error occurred retrieving the process log. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5840E 'Get Message Detail' failed: (msgNo) bapiStr

Description

An error occurred retrieving SAP message detail text. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error. Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5841I Process chain 'chainid' was successfully interrupted.

Description

Indicates that process chain chainid was successfully interrupted.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV5842A Chain ID: chainid

Description

Displays the name of the SAP process chain that will be interrupted.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5843E Get chain process list failed: (msgNo) bapiStr

Description

An error occurred in retrieving the process list for a process chain. The error originated in a BAPI called on the SAP system.

msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5844I Process status for processStatus/processStatus is now processStatus.

Description

Indicates that the precess status has changed to processStatus.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV5845I Process chain 'chainid' was successfully restarted.

Description

Indicates that process chain chainid/logid was successfully restarted.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV5846W Process Chain restart failed: (msgNo) bapiStr

Description

An error occurred in the process chain restart process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Warning

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5847A Job Status: status

Description

Displays the job staus criteria used for InfoPackage selection.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5848A InfoPackage Name: infopackage

Description

Displays the InfoPackage name criteria used for InfoPackage selection.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5849A InfoSource Name: infosource

Description

Displays the InfoSource name criteria used for InfoPackage selection.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5850A Source System: system

Description

Displays the Source System criteria used for InfoPackage selection.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5851A Data Source: system

Description

Displays the Data Source criteria used for InfoPackage selection.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5852E InfoPackage selection failed: (msgNo) bapiStr

Description

An error occurred in the InfoPackage selection process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5853E InfoPackage start failed: (msgNo) bapiStr

Description

An error occurred trying to start an InfoPackage. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5854E The current license parameters do not allow Business Warehouse functionality.

Description

The current value for 'License_BW_Interface' is 'no'. A value of 'yes' is required to use the Business Warehouse interface. This will require a new license from Stonebranch, Inc.

Severity

Error

System Action

The program terminates.

User Action

Contact Stonebranch, Inc. for information on obtaining a new license.

Component

Universal Connector

----

UNV5855E Generating usap job definition failed: (msgNo) bapiStr

Description

An error occurred generating a usap job definition. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number.

bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5856I BAPI message: (msgNo) bapiStr

Description

A BAPI warning or error message ws returned by a function call. The message originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number.

bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Informational

System Action

Depends on the context of the message.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the message.

Try to determine the cause of the message. If a cause cannot be found and the message persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5857I Reconnecting to command ID process chain: jobname/jobid/cmdid/logid..

Description

A command ID job matching the criteria specified on the command line was found. USAP will reconnect to the associated SAP process chain continue monitoring and or report the completed results.

Severity

Informational

System Action

The program continues.

User Action

Nothing.

Component

Universal Connector

----

UNV5858I Creating command ID job for process chain: jobname/jobid/cmdid/logid.

Description

A command ID job will be created in the SAP R/3 system for the associated process chain.

Severity

Informational

System Action

The program continues.

User Action

Nothing.

Component

Universal Connector

----

UNV5859E Job jobname/jobid already exists with Command ID (cmdId).

Description

A job with command ID cmdId already exists in the SAP R/3 system.

Severity

Error

System Action

The program terminates.

User Action

The pre-existing job with command ID cmdId must be removed from the R/3 system or, a unique jobname/command ID pair must be used.

If the intent is to restart the associated process chain instance, add the -force option to the command line.

Component

Universal Connector

----

UNV5860E Restart failed: Job (jobname) with command ID (cmdId) not found.

Description

Restart 'yes' was specified but, the restart job could not be found in the SAP R/3 system.

Severity

Error

System Action

The program terminates.

User Action

Make sure the process chain ID and command ID are correct. If the job is not found, the restart will not be able to complete.

Component

Universal Connector

----

UNV5861E Restart failed: multiple command ID jobs were found.

Description

Restart 'yes' was specified but, more than one job was found that matched the command ID job criteria.

Severity

Error

System Action

The program terminates.

User Action

Make sure the job name and command ID are correct. If they are correct, the duplicate command ID jobs must be purged from the R/3 system.

Component

Universal Connector

----

UNV5862E Restart failed: log ID not found in command ID job jobname/jobid.

Description

Restart 'yes' was specified but, the process chain log ID could not be retrieved. The command ID job was found but, it did not contain the process chain log ID.

Severity

Error

System Action

The program terminates.

User Action

Make sure the job name and command ID are correct. If they are correct, a restart is not possible.

Component

Universal Connector

----

UNV5863I Restarting command ID process chain: jobname/jobid/cmdid/logid..

Description

A force restart was requested. The process chain instance associated with the command ID job will be restarted.

Severity

Informational

System Action

The program continues.

User Action

Nothing.

Component

Universal Connector

----

UNV5864E Unable to determine chain ID for restart option.

Description

A job process chain ID was not found on the command line.

Severity

Error

System Action

The program terminates.

User Action

Make sure the process chain ID is specified on the command line.

Component

Universal Connector

----

UNV5865A Calendar ID: calid

Description

Displays the calendar ID.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5866A Calendar Type: caltype

Description

Displays the calendar type.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5867A Print details: opt

Description

Displays the option for printing details.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5868E Get SAP calendar failed: (msgNo) bapiStr

Description

An error occurred retrieving the SAP calendar. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5869E Retrieving factory calendars failed: (msgNo) bapiStr

Description

An error occurred trying to retrieve factory calendars. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV5870E Multiple jobs meet the selection criteria. Please qualify the job by specifying the Job ID or, use the resolve_multi_model option.

Description

An operation that required a model job from the SAP system found multiple candidates for the model job. A job ID qualifier was not specified and USAP was not instructed to resolve multiple candidates.

Severity

Error

System Action

The program terminates.

User Action

If the job ID of the model job is known, specify it on the command line to qualify the specific job to be used as the model. Otherwise, the resolve_multi_model option can be used to let USAP choose the appropriate model job from the SAP system.

Component

Universal Connector

----

UNV5871I Using model job: jobName/jobId \[user\] changeDate changeTime

Description

An operation that required a model job from the SAP system is using the specified job.jobName indicates the job name.jobId indicates the job ID.user indicates user who initiated the SAP model job.changeDate indicates the last change date for the SAP model job.changeTime indicates the last change time for the SAP model job.
Severity

Informational

System Action

The program continues.

User Action

Nothing.

Component

Universal Connector

----

UNV5872A SAPROUTER: saprouter

Description

Displays the sapRouter string that will be used to connect to the SAP system.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5873A RFC SNC library: path

Description

Displays path to the RFC SNC library.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5874A RFC SNC MYNAME: token

Description

Displays RFC SNC MYNAME token identifier.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5875A RFC SNC PARTNERNAME: token

Description

Displays RFC SNC PARTNERNAME token identifier.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5876A RFC SNC QOP: qop

Description

Displays RFC SNC QOP value.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5877A RFC PCS: pcs

Description

Displays RFC PCS value.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5878A RFC CODEPAGE: codepage

Description

Displays RFC CODEPAGE.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5879A RFC NO COMPRESSION: nocompress

Description

Displays RFC NO COMPRESSION.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5880A RFC ON CCE: on_cce

Description

Displays RFC ON CCE.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5881A RFC CFIT: cfit

Description

Displays RFC CFIT.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5882A SNC SSO: snc_sso

Description

Displays SNC SSO value.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5883A MYSAPSSO2: mysapsso2

Description

Displays RFC MYSAPSSO2 value.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5884A RFC X509CERT: path

Description

Displays RFC X509CERT value.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5885A RFC DELTA: delta

Description

Displays RFC DELTA value.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5886A RFC USE_SYMBOLIC_NAMES: use_symbolic_names

Description

Displays RFC USE_SYMBOLIC_NAMES value.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5887A RFC trace: level

Description

Displays the RFC trace level.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5888E Open failed for file 'filename': reason

Description

The file 'filename' could not be opened. filename is the name of the file. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Make sure the specified file exists, and is in a location accessible to the user account running Universal Connector.

Component

Universal Connector

----

UNV5889W Spool list page size exceeds user specified spool receive buffer (spool_recv_buffer).

Description

The buffered page size of the requested spool list on the SAP R/3 system exceeds the user specified spool receive buffer. Therefore, USAP will not attempt to retrieve the spoollist. The spoollist will be left on the SAP R/3 system. This message is followed by additional messages that provide information about the spoollist.

Severity

Warning

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV5890I Projected spool page size:title

Description

Displays the spoollist page size in bytes.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV5891I Retrieving last line_count lines of the job log.
Description

The job log on the SAP system exceeded the user specified max job log size. <->

However, it was determined that line_count lines could safely be returned. Therefore, a partial job log was returned containing the last line_count lines of the log from the SAP system. The job log will be left on the SAP R/3 for further analysis..

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV5892I Projected request size..:bytes

Description

Displays the requested portion of the spool list size in bytes.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV5893A SNC MODE: snc_mode

Description

Displays SNC MODE value.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5894A License information:

Description

This is a header message that precedes the display of the Universal Connector for SAP license information.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5895A Version: ver, date

Description

Displays the current version of the program. ver is the version number and current build level. date is the build date and time.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5896A Licensed to: owner

Description

Displays the holder of the software license. owner is the name of the customer that owns the license.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5897A License status: status

Description

Displays the current status of the software license.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5898A License source: source

Description

Displays the location from which license information was obtained. source will be a value to indicate the license was received from the Universal Controller or obtained via local configuration information.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV5899A License expiration: expdate

Description

Displays the license's expiration date. expdate is the expiration date/time, expressed as yyyy.mm.dd hh:mm:ss.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

Browser not supported