----

UNV2700E Error reading private key file 'filename': func, errno, reason

Description

An error occurred reading the UEC's RSA private key from file filename. The function that encountered the error was func. The error is described by the error number errno and error reason reason.

Severity

Error

System Action

The program terminates.

User Action

Correct the condition that caused the error. If the condition cannot be determined, contact Stonebranch Customer Support.

Component

Universal Enterprise Controller

----

UNV2701E Error reading certificate file 'filename': func, errno, reason

Description

An error occurred reading the UEC's X.509 certificate from file filename. The function that encountered the error was func. The error is described by the error number errno and error reason reason.

Severity

Error

System Action

The program terminates.

User Action

Correct the condition that caused the error. If the condition cannot be determined, contact Stonebranch Customer Support.

Component

Universal Enterprise Controller

----

UNV2702E Both certificate name and private key name are required.

Description

Both the certificate name and private key name associated with the certificate's public key are required. One cannot be specified without the other.

Severity

Error

System Action

The program terminates.

User Action

Specify either both options or neither.

Component

Universal Enterprise Controller

----

UNV2704E Unable to connect to ubroker at ipaddr, port: reason

Description

Universal Control Manager was unable to establish a connection to Universal Broker, which is needed to request the start of the Universal Control component. ipaddr is the IP address of the system on which UCTL Manager expects Universal Broker to be running. port is the port number that UCTL Manager expects Universal Broker to be using to accept incoming connections. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Make sure Universal Broker is running on the target system, and a network connection is available between the client and server machines. Make sure the 'host' value in UCTL Manager's configuration file is set to the IP address or host name of the system where Universal Broker is running. Also, make sure the 'port' value in UCTL Manager's configuration is set to the port number that is being used by Universal Broker to accept new connections (verify this against the service_port value in Universal Broker's configuration file). If the problem persists, contact Stonebranch customer support.

Windows NT/2000 users: Configuration values for all Universal products can be checked using Universal Configuration Manger, which is accessible from the Control Panel.

Component

Universal Enterprise Controller

----

UNV2705E Error starting UCTL: func, errno, reason

Description

Universal Control Manager was unable to send a request to Universal Broker to start the UCTL component. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Make sure Universal Broker is running on the target system, and a network connection is available between the client and server machines. If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2706E func failed: (errno) reason

Description

A call to a system function, identified by 'func' was not successful. errno is the error number. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Contact Stonebranch customer support if unable to identify and resolve the problem.

Component

Universal Enterprise Controller

----

UNV2707E Error sending STOP message: func, errno, reason

Description

Universal Control Manager was unable to send a message to Universal Control Server containing the component stop information. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Make sure a network connection is still available between the client and server machines. Check the Universal Broker message log for any errors reported by Universal Control Server. If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2711E Error receiving STARTED message: func, errno, reason

Description

Universal Control Manager was unable to receive a message from Universal Control Server indicating the start of the request. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Make sure a network connection is still available between the client and server machines. Check the Universal Broker message log for any errors reported by Universal Control Server. If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2712E Error receiving ENDED message: func, errno, reason

Description

Universal Control Manager was unable to receive a message from Universal Control Server indicating the completion of the request. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Make sure a network connection is still available between the client and server machines. Check the Universal Broker message log for any errors reported by Universal Control Server. If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2715E Error starting remote command: reason

Description

Universal Control Server rejected the control request sent by the Universal Control Manager. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Make sure the correct file name and path information for the process was specified. Consult the documentation for the remote process to identify and resolve the problem.

Component

Universal Enterprise Controller

----

UNV2717E Error negotiating session with Uctl server: reason

Description

An attempt to determine compatible configuration options with Universal Control Server failed. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Make sure a network connection is still available between the client and server machines. Also, check the value of the start_command entry in the UCTL component definition file. If this is not correct (and UCTL Server could not be started), UCTL Manager may time out waiting for the negotiation to start. If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2718I Universal Control client shutdown initiated due to user interrupt.

Description

Universal Control Manager is terminating due to a cancel request issued by a user.

Severity

Informational

System Action

The program terminates.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2719E Error processing user identification request: func, errno, reason

Description

Universal Control Manager was unable to provide Universal Control Server with the user ID and/or password values stored in its configuration file or specified as a command parameter. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Make sure a network connection exists between the client and server machines. If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2720E The server requires a User ID.

Description

A user ID is required by Universal Control Server to stop the requested component, but none was supplied Universal Control Manager.

Severity

Error

System Action

The program terminates.

User Action

Add the -userid parameter to the list of parameters used for the Universal Control command (see the Universal Control User's Guide for more information). To set up a default user ID, update the userid value in Universal Control Manager's configuration file.

Component

Universal Enterprise Controller

----

UNV2722I Connecting to broker at ipaddr, port.

Description

Indicates that Universal Control Manager is trying to connect to Universal Broker at internet address ipaddr on port port.

Severity

Informational

System Action

The program continues.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2723I Stop request started at remote time starttime.

Description

Indicates that the request to stop the component has started on the remote system. starttime is the time the stop request was sent, expressed in terms of the remote system's local time.

Severity

Informational

System Action

The program continues.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2724I Stop request ended with exit code exitcode at remote time endtime.

Description

Indicates that the component was requested to stop on the remote system. This message does not necessarily mean the request ended successfully, but only that it was sent the stop request. exitcode is the value returned by the ubroker. endtime is the time the request ended, expressed in terms of the remote system's local time.

Severity

Informational

System Action

The program continues.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2725I Stop request ended abnormally with exit code exitcode (hex) at remote time endtime.

Description

Indicates that the stop request did not complete, and did not end cleanly. exitcode is the value returned by the ubroker. hex is a hexadecimal representation of the exit code. endtime is the time the request ended, expressed in terms of the remote system's local time.

Severity

Informational

System Action

The program continues.

User Action

None required on behalf of Universal Control.

Component

Universal Enterprise Controller

----

UNV2726I Component compId in Stop request not found. Remote time endtime.

Description

Indicates that the component which was to be stopped was not running on the remote system specified. endtime is the time the ubroker response was returned expressed in terms of the remote system's local time.

Severity

Informational

System Action

The program continues.

User Action

Use uquery to check the status of components on the remote system and verify that the correct host and component ID were specified.

Component

Universal Enterprise Controller

----

UNV2729I The maximum number of components are running on the Broker. Retry in num seconds.

Description

The Universal Control component cannot be started because the number of components currently being managed by Universal Broker has reached the maximum allowed. An attempt to start the component will be made every num seconds.

Severity

Informational

System Action

The program continues, attempting to start the component every num seconds.

User Action

Allow the program to run, waiting for another component to finish so the one waiting can start. Or, cancel UCTL Manager and try again later. If necessary, increase the running_max value in the Universal Broker configuration file.

Windows NT/2000 users: This value can be changed using Universal Configuration Manager, which is accessible via the Control Panel.

Component

Universal Enterprise Controller

----

UNV2730E Network interfaces are down. Recovery attempted every sec seconds.

Description

A network condition has prevent access to the network. On MVS, the condition causing the problem could be the TCP/IP address space being stopped. The Controller attempts to reestablish the network interfaces every sec seconds. Message UNV2731I is printed when the interfaces are recovered if message level is set to INFO.

Severity

Error

System Action

The program continues be attempting reestablishment periodically.

User Action

In the case of MVS, check that the TCP/IP started task address space is running.

Component

Universal Enterprise Controller

----

UNV2731I Network interface recovery completed successfully.

Description

The network interfaces used by the Controller have been successfully reestablished. The network interfaces were stopped previously due to a network fault that prevented use of the network as indicated by message UNV2730E.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Enterprise Controller

----

UNV2748I Universal Control Server component cid started.

Description

Indicates that the Universal Control Server has been successfully started. The Server's component identifier is cid.

Severity

Informational

System Action

The program continues.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2749E Could not allocate thread message data.

Description

Indicates UEC was unable to allocate space for its thread message data.

Severity

Error

System Action

The program exits.

User Action

Try reducing the block size in UEC's configuration.

Component

Universal Enterprise Controller

----

UNV2750E Failed to add permission to the base permission list.

Description

A permission could not be added to the controller's base permission list.

Severity

Error

System Action

The program terminates.

User Action

Check to make sure the controller has enough memory to execute properly.

Component

Universal Enterprise Controller

----

UNV2751E Failed to retrieve permission by id: id, buf.

Description

A based permission could not be retrieved by its identifier.

Severity

Error

System Action

Undefined.

User Action

Call Stonebranch Technical Support.

Component

Universal Enterprise Controller

----

UNV2752I Universal Enterprise Controller Load ended successfully with exit code exitcode.

Description

The Universal Enterprise Controller Load utility successfully executed the command request.

Severity

Informational

System Action

None

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2753E Universal Enterprise Controller Load ended unsuccessfully with exit code errno.

Description

Indicates that the Universal Enterprise Controller Load program ended abnormally. errno is the program's exit status.

Severity

Error

System Action

The program terminates, returning the status specified by errno.

User Action

If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2754E The 'action' parameter is required.

Description

The -action parameter was not specified on the Universal Enterprise Controller Load utility command line.

Severity

Error

System Action

The program terminates.

User Action

Specify the -action parameter, along with either the -file parameter or the broker definition parameters.

Component

Universal Enterprise Controller

----

UNV2755I Connecting to local Universal Enterprise Controller on port port.

Description

Indicates that the Universal Enterprise Controller Load utility is trying to connect to a local Universal Enterprise Controller on port port.

Severity

Informational

System Action

The program continues.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2756E Unable to connect to local Universal Enterprise Controller on port port: reason

Description

The Universal Enterprise Controller Load utility was unable to establish a connection to the Universal Enterprise Controller.

Severity

Error

System Action

The program terminates.

User Action

Make sure Universal Enterprise Controller is running on the local system. If the Universal Enterprise Controller is not accepting incoming connections on the installation default of 8778, then supply the -port option from the uecload command line.

Component

Universal Enterprise Controller

----

UNV2757I Universal Enterprise Controller Load shutdown initiated due to user interrupt.

Description

The Universal Enterprise Controller Load utility is terminating due to a cancel request issued by a user.

Severity

Informational

System Action

The program terminates.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2758E Only one action may be specified.

Description

More than one action was specified from the UECLoad command line. Valid actions are 'add', 'delete', 'list' and 'export'.

Severity

Error

System Action

The program terminates.

User Action

Specify a single action and rerun the UEC Load utility.

Component

Universal Enterprise Controller

----

UNV2759E Open failed for definition file 'file': reason

Description

The specified definition file could not be opened. file is the name of the definition file. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Make sure the specified definition file exists and that the user account running the program has read access to the directory where the file resides. If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2760A Unable to connect to broker: msg.

Description

This message is printed as an alert notification that the broker did not respond to a query request. msg provides the reason the broker could not be reached.

Severity

Alert

System Action

The program continues. The broker will be queried later and if it responds, an alert message will be issued to record the event.

User Action

No action is required.

Component

Universal Enterprise Controller

----

UNV2761A The component cmpname cmpid is disconnected.

Description

This message is printed as an alert notification that the component named cmpname has become disconnected from the manager that started it. The component ID is cmpid.

Severity

Alert

System Action

The program continues. Once the component's communication is reestablished with the broker, an alert message will be issued to record the event.

User Action

No action is required.

Component

Universal Enterprise Controller

----

UNV2762A The component cmpname cmpid is orphaned.

Description

This message is printed as an alert notification that the component named cmpname has become orphaned. A component becomes orphaned when the component's manager terminates. The component ID is cmpid.

Severity

Alert

System Action

The program continues. Once another manager adopts the component, an alert message will be issued to record the event.

User Action

No action is required.

Component

Universal Enterprise Controller

----

UNV2763A Broker is responding.

Description

This message is printed as an alert notification that the broker is now responding to query requests. This alert is printed when a broker that was not previously responding to query request starts responding.

Severity

Alert

System Action

The program continues.

User Action

No action is required.

Component

Universal Enterprise Controller

----

UNV2764A The component cmpname cmpid is reestablished.

Description

This message is printed as an alert notification that the component named cmpname running has reestablished communication with its manager. The component ID is cmpid. This alert is printed when a previously disconnected or orphaned component re-establishes communication with a manager.

Severity

Alert

System Action

The program continues.

User Action

No action is required.

Component

Universal Enterprise Controller

----

UNV2765E cfgfile (recNo:lineno): Value of keyword 'keyword' exceeded max length.

Description

The value of a configuration option exceeded the maximum length of 2000 characters. cfgfile is the name of the configuration file with the invalid value. recNo is the record number within the definition file where the invalid value is located. lineno is the line number of the configuration file where the invalid value is located. keyword is the name of the configuration option with the invalid value.

Severity

Error

System Action

The program terminates.

User Action

Correct the value and restart the program.

Component

Universal Enterprise Controller

----

UNV2766E cfgfile (recNo:lineno): Invalid keyword 'keyword'

Description

A keyword in the specified configuration file was not valid, due to one of the following:

- The length of the keyword exceeded 61 characters.

- The program did not recognize the keyword.

cfgfile is the name of the configuration file that contains the invalid keyword. recNo is the record number within the definition file where the invalid keyword is located. lineno is the line number of the configuration file where the invalid keyword is located. keyword is the invalid keyword.

Severity

Error

System Action

The program terminates.

User Action

Refer to the User's Guide for the correct names of available configuration options. If the configuration option is not supported by the version of the software currently installed, either upgrade the software or comment out the entry in the configuration file.

Component

Universal Enterprise Controller

----

UNV2767E cfgfile (recNolineno): Invalid value for keyword 'keyword' reason

Description

The value given for the specified keyword is not valid. cfgfile is the name of the configuration file that contains the invalid value. recNo is the record number within the definition file where the invalid value is specified. lineno is the line number of the configuration file where the invalid value is specified. keyword is the name of the keyword whose value is invalid. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Refer to the User's Guide for an explanation of the configuration options, and for examples of valid option values. If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2768E cfgfile (recNo:lineno): Error processing keyword 'keyword': func, errno, reason.

Description

An attempt to obtain or verify the value of a configuration option specified in a configuration file failed. cfgfile is the name of the configuration file. recNo is the record number within the definition file on which the error occurred. lineno is the line number of the configuration file on which the error occurred. keyword is the name of the keyword. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Refer to the User's Guide or command line help to verify that the configuration option is correctly defined. If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2769E Missing Universal Enterprise Controller 'port' argument.

Description

The Universal Enterprise Controller port number of the remote system was not supplied as a parameter to the Universal Enterprise Controller Load command, and no default value is available.

Severity

Error

System Action

The program terminates.

User Action

Add the -port parameter to the UECload command.

Component

Universal Enterprise Controller

----

UNV2770E Missing Universal Enterprise Controller 'userid' argument.

Description

The Universal Enterprise Controller userid for logging into the remote Universal Enterprise Controller was not supplied as a parameter to the UECload command, and no default value is available.

Severity

Error

System Action

The program terminates.

User Action

Add the -userid parameter to the UECload command.

Component

Universal Enterprise Controller

----

UNV2771E Missing Universal Enterprise Controller '-pwd' argument.

Description

The Universal Enterprise Controller password for logging into the remote Universal Enterprise Controller was not supplied as a parameter to the UECload command, and no default value is available.

Severity

Error

System Action

The program terminates.

User Action

Add the -pwd parameter to the UECload command.

Component

Universal Enterprise Controller

----

UNV2772E A definition file or broker definition must be specified.

Description

When adding broker definition records, you must specify either the -deffile parameter along with the name of a definition file, or the -broker_name parameter.

Severity

Error

System Action

The program terminates.

User Action

Retry the command, providing either the -file or -broker_name parameters, along with the appropriate values for each.

Component

Universal Enterprise Controller

----

UNV2773E Only a definition file or broker definition can be specified.

Description

When adding broker definition records, you must specify either the -deffile parameter along with the name of a definition file, or the -broker_name parameter.

Severity

Error

System Action

The program terminates.

User Action

Retry the command, providing either the -file or -broker_name parameters, along with the appropriate values for each.

Component

Universal Enterprise Controller

----

UNV2774E Broker definition must include broker name, host, and port.

Description

When adding broker definition records without the use of a definition file, you must specify the -broker_name, -broker_host, and -broker_port parameter.

Severity

Error

System Action

The program terminates.

User Action

Retry the command, providing either the -file or -broker_name parameters, along with the appropriate values for each.

Component

Universal Enterprise Controller

----

UNV2775E Broker definition must include broker name or broker host and port.

Description

When broker definition records without the use of a definition file, you must specify the -broker_name, -broker_host, and -broker_port parameter.

Severity

Error

System Action

The program terminates.

User Action

Retry the command, providing either the -broker_name parameter or the -broker_host and -broker_port parameters, along with the appropriate values for each.

Component

Universal Enterprise Controller

----

UNV2776W The -file parameter will be ignored.

Description

A request was made to list broker definitions, but the -deffile parameter was also specified. Records will be listed to the standard output file (stdout), so the -file parameter has no effect on the command.

Severity

Warning

System Action

The program continues.

User Action

Remove the -file parameter.

Component

Universal Enterprise Controller

----

UNV2777W No UEC broker records found with matching broker definitions."

Description

A request was made to list broker definitions, but there were no matching records found for the specified broker definition.

Severity

Warning

System Action

The program continues.

User Action

Modify your broker definition to identify brokers defined on the Universal Enterprise Controller.

Component

Universal Enterprise Controller

----

UNV2778E Load file broker definition definitionNum is invalid.

Description

The identified broker definition within the UECLoad Load File is invalid. definitionNum is the record number of the invalid broker definition.

Severity

Error

System Action

The program continues.

User Action

Look at the indicated record within the Load File and verify that format is correct and the correct configuration IDs are being used. If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2779E Broker definition definitionNum for broker name bkrName was not accepted by UEC.

Description

The identified broker definition within the UECLoad Load File is invalid. definitionNum is the record number of the broker definition not accepted. bkrName is the broker name that was not accepted by UEC.

Severity

Error

System Action

The program continues.

User Action

Look at the indicated record within the Load File and verify that it does not already exist on the Universal Enterprise Controller. If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2780I Broker definition definitionNum for broker name bkrName was successfully added to UEC.

Description

The identified broker definition within the UECLoad Load File is invalid. definitionNum is the record number of the broker definition not accepted. bkrName is the broker name that was not accepted by Universal Enterprise Controller.

Severity

Informational

System Action

None

User Action

None Required.

Component

Universal Enterprise Controller

----

UNV2781I Broker definition was successfully added to UEC.

Description

The specified broker definition was successfully added to the Universal Enterprise Controller.

Severity

Informational

System Action

None

User Action

None Required.

Component

Universal Enterprise Controller

----

UNV2782E Broker definition was not accepted by UEC.

Description

The specified broker definition was not accepted by Universal Enterprise Controller.

Severity

Error

System Action

The program continues.

User Action

Look at the specified broker definition and verify that it does not already exist on the Universal Enterprise Controller. If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2783A Configuration information:

Description

A header that precedes the display of configuration options in effect for the UECLoad utility.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2784A config options:

Description

A header that precedes the display of specific configuration options in effect for the UECLoad utility. config is the category of options being displayed.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2785A Universal Enterprise Controller User ID: userid

Description

Displays the Universal Enterprise Controller User ID with which the UECLoad utility will run. userid is the name of the UEC user account.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2786A Target UEC host: ipaddr, port number: port

Description

Displays the IP address and port number of the UEC system that the UECLoad utility will connect to in order to start the Universal Enterprise Controller command line process. ipaddr is the IP address. port is the port number.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2787A Action: action

Description

Displays the Action taken by the Universal Enterprise Controller utility program. action is the Action.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2788A Definition file: fname

Description

Displays the name of the file that contains the Broker definitions to be defined on the Universal Enterprise Controller. If this option is not displayed, the standard command line options will be used. fname is the name of the definition file from which input is read.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2789A Broker Name: bkrName

Description

Displays the name of the broker being defined/retrieved/deleted on the Universal Enterprise Controller. bkrName is the name of the Broker being defined/retrieved/deleted.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2790A Broker IP Address: ipAddr

Description

Displays the IP Address of the broker being defined/retrieved/deleted on the Universal Enterprise Controller. ipAddr is the IP Address of the broker being defined/retrieved/deleted.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2791A Broker Port: port

Description

Displays the Port of the Broker being defined/retrieved/deleted on the Universal Enterprise Controller. port is the port number of the broker being defined/retrieved/deleted.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2792A Broker Description: desc

Description

Displays the description of the Broker being defined/retrieved/deleted on the Universal Enterprise Controller. desc is the description of the broker being defined/retrieved/deleted.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2793E Could not find configuration file 'cfgfile'.

Description

The program could not locate the file, cfgfile, which contains configuration settings for the Universal Enterprise Controller.

Severity

Error

System Action

The program terminates.

User Action

Configuration files for all Universal components must reside in one of the following directories:

- /etc/opt/universal

- /etc/universal

- /etc/stonebranch

- /etc

- /usr/etc/universal

- /usr/etc/stonebranch

- /usr/etc

If the file specified by cfgfile is not present in one of these directories, re-run the install script to create a configuration file. If the file does exist in one of the directories listed above, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2794E Broker name bkrName was not deleted from UEC.

Description

The identified broker name was not successfully deleted from the Universal Enterprise Controller. bkrName is the broker name that was not successfully deleted from the Universal Enterprise Controller database.

Severity

Error

System Action

The program continues.

User Action

Look at the indicated broker name and verify that it still exists on the Universal Enterprise Controller. If the problem persists, contact Stonebranch customer support.

Component

Universal Enterprise Controller

----

UNV2795I Broker Name bkrName was successfully deleted from UEC.

Description

The identified broker name was successfully deleted from the Universal Enterprise Controller database. bkrName is the broker name that was deleted from the Universal Enterprise Controller.

Severity

Informational

System Action

None

User Action

None Required.

Component

Universal Enterprise Controller

----

UNV2796E Missing 'host' argument.

Description

The IP address or host name of the Universal Enterprise Controller was not supplied as a parameter to the Universal Enterprise Controller Load command, and no default value is available.

Severity

Error

System Action

The program terminates.

User Action

Add the -host parameter to the UECload command.

Component

Universal Enterprise Controller

----

UNV2797I Invalid characters found at the end of XML message.

Description

The Universal Enterprise Controller Load utility found invalid characters at the end of the received XML buffer from the Universal Enterprise Controller.

Severity

Informational

System Action

The program terminates.

User Action

None required.

Component

Universal Enterprise Controller

----

UNV2798W No UEC broker records found with broker definition broker.

Description

A request was made to delete a broker definitions, but there were no matching records found for the specified broker definition. broker is the broker definition specified.

Severity

Warning

System Action

The program continues.

User Action

Modify your broker definition to identify brokers defined on the Universal Enterprise Controller.

Component

Universal Enterprise Controller

----

UNV2799W No UEC broker records found within specified broker definition file.

Description

A request was made to add or delete broker definitions, but there were no records found within the specified broker definition file.

Severity

Warning

System Action

The program continues.

User Action

Verify that the correct Broker Definition file is being used and has a valid syntax.

Component

Universal Enterprise Controller

Browser not supported