----

UNV3000E Job network creation failed: (msgNo) bapiStr

Description

An error occurred in the job network creation process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3001E Job network start failed: (msgNo) bapiStr

Description

An error occurred trying to start a job network. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. <->

bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3002E Mutually exclusive PURGE parameters specified.

Description

One or more conflicting parameters have been specified for the PURGE command. Each command group has a specific set of options that are available to it.

Severity

Error

System Action

The program terminates.

User Action

Determine which PURGE parameters do not belong. Remove the conflicting command options and reissue the command.

Component

Universal Connector

----

UNV3003I Job network (jobnetid) has been created.

Description

The Job network identified by jobnetid has been created.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3004I Job network (jobnetid) - process(jobnetprcid) has been started.

Description

The Job network process, identified by jobnetid and jobnetprcid, has been started.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3005I Job network (jobnetid) has been purged.

Description

The job network identified by jobnetid has been purged.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3006W "Continuing without the use of BANK_MAP_PROCFL_GET_NET_STAT."

Description

Usap is unable to use BAPI function module BANK_MAP_PROCFL_GET_NET_STAT to retrieve the status of the FS job network. Processing will continue by relying on the technical return codes of the network processes.

Severity

Warning

System Action

Usap will use continue to process the job network.

User Action

Apply the necessary fix to the SAP R/3 system to support BAPI function module BANK_MAP_PROCFL_GET_NET_STAT.

Component

Universal Connector

----

UNV3007W "Usap is unable to purge the FS job network."

Description

BANK_MAP_PROCFL_DESTRUCTOR is not available on the SAP R/3 system. Usap is unable to purge the FS job network.

Severity

Warning

System Action

Usap will use continue to process the job network.

User Action

Apply the necessary fix to the SAP R/3 system to support BAPI function module BANK_MAP_PROCFL_DESTRUCTOR.

Component

Universal Connector

----

UNV3008I Job network (netid) - process (netprocid): technical status is now (jobStatus).

Description

Indicates that the jobnet process' technical status has changed to jobStatus.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3009I Job network (netid) - process (netprocid): application status is now (jobStatus).

Description

Indicates that the jobnet process' application status has changed to jobStatus.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3010I Job network (netid) - process (netprocid): application status is now (jobStatus).

Description

Indicates that the jobnet process' application status has changed to jobStatus.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3011E A command ID must be specified when requesting a restart.

Description

When an attempt is made to restart a USAP started SAP R/3 job, a unique command ID must be supplied. This command ID is used by USAP to validate the restart request.

Severity

Error

System Action

The program terminates.

User Action

Add the -cmdid parameter to the USAP command line and specify the same command ID that was used for the initial run.

Component

Universal Connector

----

UNV3012E Unable to determine job name for restart option.

Description

A job name was not found on the command line or in a job definition file.

Severity

Error

System Action

The program terminates.

User Action

Make sure the job name is specified on the command line or, properly defined in a job definition file.

Component

Universal Connector

----

UNV3013E Job jobname/jobid already exists with Command ID (cmdId).

Description

A job with command ID cmdId already exists in the SAP R/3 system.

Severity

Error

System Action

The program terminates.

User Action

The pre-existing job with command ID cmdId must be removed from the R/3 system or, a unique jobname/command ID pair must be used.

Component

Universal Connector

----

UNV3014E Restart failed: Job (jobname) with command ID (cmdId) not found.

Description

Restart 'yes' was specified but, the restart job could not be found in the SAP R/3 system.

Severity

Error

System Action

The program terminates.

User Action

Make sure the job name and command ID are correct. If they are correct, the job must be defined to the R/3 system. This can be done automatically if the restart option is set to 'auto'.

Component

Universal Connector

----

UNV3015E Restart failed: multiple command ID jobs were found.

Description

Restart 'yes' was specified but, more than one job was found that matched the command ID job criteria.

Severity

Error

System Action

The program terminates.

User Action

Make sure the job name and command ID are correct. If they are correct, the duplicate command ID jobs must be purged from the R/3 system.

Component

Universal Connector

----

UNV3016I Starting search for command ID job: jobname/jobid/cmdid.

Description

Beginning a search for a command ID job.

Severity

Informational

System Action

The program continues.

User Action

Nothing.

Component

Universal Connector

----

UNV3017I Found command ID job: jobname/jobid/cmdid.

Description

A command ID job was found.

Severity

Informational

System Action

The program continues.

User Action

Nothing.

Component

Universal Connector

----

UNV3018I Ending search for command ID job: jobname/jobid/cmdid.

Description

The search for the command ID job has completed.

Severity

Informational

System Action

The program continues.

User Action

Nothing.

Component

Universal Connector

----

UNV3019E A command ID must be specified when requesting a restart.

Description

When an attempt is made to restart a Universal Connector command ID job, a unique command ID must be supplied. This command ID is used by the USAP to validate the restart request.

Severity

Error

System Action

The program terminates.

User Action

Add the -cmdid parameter to the Universal Connector command line and specify the same command ID that was used for the initial run.

Component

Universal Connector

----

UNV3020E Auto restart not allowed: auto_restart_ok option is set to NO.

Description

The AUTO option was specified for 'restart' parameter and the 'auto_restart_ok' parameter is set to NO.

Severity

Error

System Action

The program terminates.

User Action

Either set the auto_restart_ok parameter to YES or do not use the restart AUTO option.

Component

Universal Connector

----

UNV3021E 'Find Command ID Job' failed: (msgNo) bapiStr.

Description

An error occurred trying to find command ID jobs in the SAP R/3 system. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

This most likely does not indicate an error in processing. It usually indicates the absence of the job in the R/3 system.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3022I Reconnecting to command ID job: jobname/jobid/cmdid.

Description

A command ID job matching the criteria specified on the command line was found. USAP will reconnect to the SAP R/3 job and complete the tasks specified on the command line.

Severity

Informational

System Action

The program continues.

User Action

Nothing.

Component

Universal Connector

----

UNV3023I Creating command ID job: jobname/jobid/cmdid.

Description

A command ID job will be created in the SAP R/3 system.

Severity

Informational

System Action

The program continues.

User Action

Nothing.

Component

Universal Connector

----

UNV3024E Variant creation failed: (msgNo) bapiStr

Description

An error occurred in the variant creation process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3025E Obtaining variant contents failed: (msgNo) bapiStr

Description

An error occurred obtaining variant contents. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3026E Invalid Generate command: disp.

Description

The command option, gen, entered for the GENERATE command is not valid.

Severity

Error

System Action

The program terminates.

User Action

Check the Universal Connector Reference Guide or command-line help for proper spelling and valid options.

Component

Universal Connector

----

UNV3027E Generating variant failed: (msgNo) bapiStr

Description

An error occurred trying to generate the variant. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3028I Variant var was successfully created for report rpt.

Description

Indicates that the variant creation process was completed successfully for variant var of report rpt.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3029I Variant var was successfully modified for report rpt.

Description

Indicates that the variant modification process was completed successfully for variant var of report rpt.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3030I Variant var was successfully generated for report rpt.

Description

Indicates that the variant definition process was completed successfully for variant var of report rpt.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3031I Requesting interface: interface version.

Description

USAP is requesting the specified interface

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3032I Using interface: interface version.

Description

Indicates that the variant definition process was completed successfully for variant var of report rpt.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3033E Job header modification failed: (msgNo) bapiStr

Description

An error occurred while attempting to modify the job header. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3034E Command step modification failed: (msgNo) bapiStr

Description

An error occurred while attempting to modify a command step. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3035I Job jobname/jobid was successfully created.

Description

Indicates that the job creation process was completed successfully for job jobname/jobid.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3036I Job jobname/jobid was successfully modified.

Description

Indicates that the job modification process was completed successfully for job jobname/jobid.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3037E Mutually exclusive RELEASE parameters specified.

Description

One or more conflicting parameters have been specified for the RELEASE command. Each command group has a specific set of options that are available to it.

Severity

Error

System Action

The program terminates.

User Action

Determine which RELEASE parameters do not belong. Remove the conflicting command options and reissue the command.

Component

Universal Connector

----

UNV3038E Job definition requires XBP 2.0 interface.

Description

The job definition file contains one or more keywords for parameters that can only be defined using the XBP 2.0 interface.

Severity

Error

System Action

The program terminates.

User Action

Remove the keywords that require the CM interface or, turn on auto CM.

Component

Universal Connector

----

UNV3039E External program step creation failed: (msgNo) bapiStr

Description

An error occurred adding a step to a job. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3040E External command step creation failed: (msgNo) bapiStr

Description

An error occurred adding a step to a job. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3041E Unknown step type: 'steptype'

Description

An unknown step type was encountered while generating a job definition.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3042I Job definition was successfully generated from job jobname/jobid.

Description

Indicates that the job definition generation process was completed successfully from job jobname/jobid.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3043I Job jobname/jobid was successfully purged from the system.

Description

Indicates that job jobname/jobid was successfully purged from the R/3 system.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3044I job status is now jobStatus.

Description

Indicates that the job status has changed to jobStatus.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3045I Detected child job jobname/jobid.

Description

Indicates that a child job jobname/jobid was detected.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3046E Missing job step.

Description

A job step was not defined for the job.

Severity

Error

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3047I Intercept table was successfully replaced.

Description

The job intercept table was successfully replaced.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3048I Intercept table was successfully appended.

Description

The job intercept table was successfully appended.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3049E Syslog Read failed: (msgNo) bapiStr

Description

An error occurred trying to read the syslog. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3050E Job intercept table modification failed: (msgNo) bapiStr

Description

An error occurred in the job intercept table modification process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3051E Get remote system time failed: (msgNo) bapiStr

Description

An error occurred getting the remote system time. At this point, Universal Connector is logging on to the SAP R/3 system. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3052E Raise background processing event failed: (msgNo) bapiStr

Description

An error occurred trying raise the background processing event. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3053E Error in RAISE_BP_EVENT command: Mutually exclusive options specified.

Description

The options specified with the RAISE_BP_EVENT command indicate using both usap definition file and command line event options for the RAISE_BP_EVENT. These two options are mutually exclusive.

Severity

Error

System Action

The program terminates.

User Action

Determine which source was intended for the SUBMIT command, emit the conflicting information, and reissue the command.

Component

Universal Connector

----

UNV3054I Background processing event event_id "event_parm" was successfully raised.

Description

Indicates that the background processing event was successfully raised in the SAP R/3 system.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3055E Display reports failed: (msgNo) bapiStr

Description

An error occurred retrieving the list of reports. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3056E Display external commands failed: (msgNo) bapiStr

Description

An error occurred retrieving the list of external commands. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3057E Display output devices failed: (msgNo) bapiStr

Description

An error occurred retrieving the list of output devices. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3058E Display print format failed: (msgNo) bapiStr

Description

An error occurred retrieving the list of print formats. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3059E Job release failed: (msgNo) bapiStr

Description

An error occurred trying to release a job. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. <->

bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3060E Display criteria table failed: (msgNo) bapiStr

Description

An error occurred trying to read the intercept criteria table. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3061E Display intercepted jobs failed: (msgNo) bapiStr

Description

An error occurred trying to retrieve intercepted jobs. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.

Severity

Error

System Action

The program terminates.

User Action

Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.

Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.

Component

Universal Connector

----

UNV3062E Initialization failed: func, errno, reason

Description

The component configuration information provided by Universal Broker and required by UCMD Server to establish its runtime environment could not be processed. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Contact Stonebranch customer support.

Component

Universal Connector

----

UNV3063I Trace data set is 'dsn, volser'.

Description

Universal Connector was started with a message level of TRACE, which may result in an application trace being written. The trace data set is dsn on volume volser.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV3064W Job log exceeds user specified maximum size limit of (max_joblog_size).

Description

The SAP job log for the current job exceeds the user specified maximum log size. Therefore, USAP will not attempt to retrieve the job log. The job log will be left on the SAP R/3 system. This message is followed by additional messages that provide information about the job log.

Severity

Warning

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV3065I Job.....................: jobname/jobid

Description

Displays the current job name and number.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV3066I TemSe object name.......: name

Description

Displays the SAP R/3 TemSe object name that contains the job log.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV3067I SAP R/3 client..........: name

Description

Displays the SAP R/3 client, in which the job log was created.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV3068I Size of job log.........: size bytes

Description

Displays the size of the job log in bytes.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV3069W Spool list request exceeds user specified maximum size limit of (max_spool_size).

Description

A spoollist on the SAP R/3 system that was targeted for retrieval by the current USAP command invocation exceeds the user specified maximum spool size. Therefore, USAP will not attempt to retrieve the spoollist. The spoollist will be left on the SAP R/3 system. This message is followed by additional messages that provide information about the spoollist.

Severity

Warning

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV3070I Job.....................: jobname/jobid

Description

Displays the current job name and number.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV3071I Step....................: stepnumber

Description

Displays the current job step number.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV3072I Spool request number....: spoolnumber

Description

Displays the spoollist request number.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV3073I Spool pages.............: pages

Description

Displays the number of pages in the spoollist.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV3074I Spool Size..............:title

Description

Displays the spoollist size in bytes.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV3075I Spool title.............: title

Description

Displays the spoollist title.

Severity

Informational

System Action

The program continues.

User Action

No action required.

Component

Universal Connector

----

UNV3078E \[Line: lineNum\] Invalid SELNAME value value for variant varName."

Description

A SELNAME value specified in the variant definition file at line lineNum is not valid for the variant being defined.

Value is the invalid value. varName is the variant that is being defined.

Severity

Error

System Action

The program terminates.

User Action

Correct the SELNAME value in the USAP variant definition file. The value must be a valid variant parameter name for the SAP ABAP report that the variant is being defined for.

Component

Universal Connector

----

UNV3079I Performing secondary uniqueness test for command ID job: jobname/jobid/cmdid.

Description

Beginning a secondary uniqueness test for a command ID job. The secondary test is required to deal with race conditions that can occur if multiple command ID jobs are submitted simultaneously with the same command ID.

Severity

Informational

System Action

The program continues.

User Action

Nothing.

Component

Universal Connector

----

UNV3080E Error initializing local Broker interface: func, errno, reason

Description

An error occurred initializing the interface to the local Universal <->

Broker. The manager communicates with the local Broker to register with it and to obtain its configuration data. The function func failed with an error code of errno, which is described by reason.

Severity

Error

System Action

The process terminates.

User Action

Check that a local Broker is running on the same system as the manager. If a Broker is not running, one must be started prior to starting the manager. Contact Stonebranch Customer Support is assistance is needed.

Component

Universal Connector

----

UNV3081E Error recording process exit code: func, errno, reason

Description

An error occurred recording the manager process exit code for local Broker monitoring. The function func failed with an error code of errno, which is described by reason.

Severity

Error

System Action

The manager terminates. The local Broker shall detect that the manager ended, but it will not know the manager exit conditions.

User Action

On UNIX, the process lock file (PLF) used by the manager may have been corrupted or removed. Although the condition cannot be recovered, the cause of the problem should be determined to prevent it from reoccurring. Contact Stonebranch Customer Support is assistance is needed.

Component

Universal Connector

----

UNV3082E Error registering with local Broker: func, errno, reason

Description

An error occurred registering with the local Universal Broker. The registration process is required for the manager to obtain its configuration data from the local Broker. The function func failed with an error code of errno, which is described by reason.

Severity

Error

System Action

The manager terminates.

User Action

Check that a local Broker is running on the same system as the manager. If a Broker is not running, one must be started prior to starting the manager. Contact Stonebranch Customer Support is assistance is needed.

Component

Universal Connector

----

UNV3083E Error establishing local broker session: func, errno, reason

Description

An error occurred establishing a communication session with the local broker. The function that failed is identified by field 'func'. Field p>errno is the error number, and field reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Contact Stonebranch customer support if unable to identify and resolve the problem.

Component

Universal Connector

----

UNV3084E Error initializing local Broker interface using system ID 'sid': func, errno, reason

Description

An error occurred initializing the interface to the local Universal Broker using system identifier sid. The manager communicates with the local Broker to register with it and to obtain its configuration data. The function func failed with an error code of errno, which is described by reason.

Severity

Error

System Action

The process terminates.

User Action

Check that a local Broker is running with the appropriate system ID on the same system as the manager. If a Broker is not running, one must be started prior to starting the manager. Contact Stonebranch Customer Support is assistance is needed.

Component

Universal Connector

----

UNV3085E Error in caller provided UUID: func, errno, reason

Description

The process and group UUID values provided by the calling process could not be successfully processed. An error was encountered by function func. The error number is errno and a description of the error is reason.

Severity

Error

System Action

The program terminates.

User Action

Contact Stonebranch customer support if unable to identify and resolve the problem.

Component

Universal Connector

----

UNV3086E Error initializing for event generation: func, errno, reason.

Description

An error occurred initializing for event generation. The function that encountered the error is func. The error number returned is errno. An explanation of the error is reason.

Severity

Error

System Action

The program terminates.

User Action

Report the error to Stonebranch Customer Support.

Component

Universal Connector

----

UNV3087I Universal Connector component cid registered with local Broker 'sid'.

Description

The connector has successfully registered with the local Broker. The connector has been assigned component ID cid by the Broker. If multiple Brokers are supported by the O/S, the system ID of the Broker is identified by sid.

Severity

Informational

System Action

Processing continues.

User Action

None required.

Component

Universal Connector

----

UNV3088E Failed initializing Component Instance: func, errno, reason

Description

The component configuration information provided by Universal Broker and required by USAP to establish its runtime environment could not be processed. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.

Severity

Error

System Action

The program terminates.

User Action

Contact Stonebranch customer support.

Component

Universal Connector

----

UNV3089I Job jobname/jobid was successfully aborted.

Description

Indicates that job jobname/jobid was successfully Aborted.

Severity

Informational

System Action

The program continues.

User Action

None.

Component

Universal Connector

----

UNV3090A Configuration information:

Description

A header that precedes the display of configuration options in effect for the Universal Connector.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV3091A config options:

Description

A header that precedes the display of specific configuration options in effect for the Universal Connector. config is the category of options being displayed.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV3092A System identifier: sid

Description

Displays the system identifier of the local Broker to which the connecter will register.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV3093A Broker interface file directory: bifdir

Description

Displays the directory in which the connector searches for the local broker interface file.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV3094A Process lock file directory: bifdir

Description

Displays the directory in which the connector creates its process lock file used by the local Broker to monitor the connector.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV3095A Destination: dest

Description

Displays the destination in the SAPRFC.INI file that will be used to connect to the SAP system.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV3096A ASHOST: ashost

Description

Displays the Application Server Host string that will be used to connect to the SAP system.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV3097A System Number: sysnr

Description

Displays the SAP system number that will be used to connect to the SAP system.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV3098A Client Number: client

Description

Displays the SAP client number that will be used to connect to the SAP system.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

----

UNV3099A SAP logon language: saplang

Description

Displays the SAP logon language that will be used for the RFC session.

Severity

Audit

System Action

None.

User Action

None required.

Component

Universal Connector

Browser not supported