Overview

The command line syntax for each execution of the CLI command, uagcmd, must specify a single CLI function, required / optional Global parameters, and required / optional function-specific parameters. You must use the required Global parameters to connect to OMS Servers and to log on to a Controller (User ID and Password).

Universal Controller supports the following CLI functions for Tasks, which are listed alphabetically on this page.

Cancel Task
Clear All Dependencies
Clear Virtual Resource Dependencies
Clear Exclusive Dependencies
Clear Time Dependency
Display All Tasks
Display Task Instance Status
Force Finish a Task
Launch a Task
Put Task on Hold
Release a Task from Hold
Rerun a Task
Set Manual Task to Started
Set Manual Task to Success
Set or Modify Wait Time for a Task Instance
Set Task Priority
Skip a Task

Syntax, parameters, and examples for each function are provided.

Cancel Task

Description	Cancels the specified task instance. See Cancelling a Task Instance for a description of behavior and restrictions.
Syntax	`uagcmd ops-task-cancel global parameters {task-instance-id=ID \| task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name]` Note For backward-compatibility, you can exclude `uagcmd` from the command line for this function and all pre-6.2.0.0 CLI functions.
Parameter	`task-instance=` Required; An internal Universal Controller identifier. Deprecated Replaced by `task-instance-id=` parameter; the command first will check for `task-instance=`; if it is not specified, the command will check for `task-instance-id=`. `task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance to run the command on. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the task instance to run the command on. (If `instance-criteria=` is not specified, the oldest active task instance with the matching name will apply.) `instance-criteria=` Optional if `task-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance `workflow-instance-name=` For a task instance in a workflow, optional; Name of the workflow instance.
Example	uagcmd ops-task-cancel -c config.cfg task-instance-name=Task A

Clear All Dependencies

Description	Clears all dependencies of a task instance.
Syntax	`uagcmd ops-task-clear-dependencies global parameters {task-instance-id=ID \| task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name]`
Parameters	`task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance to run the command on. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the task instance to run the command on. (If `instance-criteria=` is not specified, the oldest active task instance with the matching name will apply.) `instance-criteria=` Optional, if `task-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance. `workflow-instance-name=` For a task instance in a workflow, optional; Name of the workflow instance.
Example	uagcmd ops-task-clear-dependencies -c config.cfg task-instance-name=Task A

Clear Virtual Resource Dependencies

Description	Clears all virtual resource dependencies of a task instance.
Syntax	`uagcmd ops-task-clear-resources global parameters {task-instance-id=ID \| task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name] resource-name=name`
Parameters	`task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance to run the command on. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the task instance to run the command on. (If `instance-criteria=` is not specified, the oldest active task instance with the matching name will apply.) `instance-criteria=` Optional, if `task-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance. `workflow-instance-name=` For a task instance in a workflow, optional; Name of the workflow instance. `resource-name=` Required; One of the following: Name of the virtual resource dependency to clear. An asterisk ( * ) to clear all virtual resource dependencies.
Example	uagcmd ops-task-clear-resources -c config.cfg task-instance-name=Task A resource-name=Resource A

Clear Exclusive Dependencies

Description	Clears all exclusive dependencies of a task instance.
Syntax	`uagcmd ops-task-clear-exclusive global parameters {task-instance-id=ID \| task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name]`
Parameters	`task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance to run the command on. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the task instance to run the command on. (If `instance-criteria=` is not specified, the oldest active task instance with the matching name will apply.) `instance-criteria=` Optional, if `task-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance. `workflow-instance-name=` For a task instance in a workflow, optional; Name of the workflow instance.
Example	uagcmd ops-task-clear-exclusive -c config.cfg task-instance-name=Task A

Clear Time Dependency

Description	Clears the time dependency of a task instance.
Syntax	`uagcmd ops-task-clear-timewait global parameters {task-instance-id=ID \| task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name]`
Parameters	`task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance to run the command on. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the task instance to run the command on. (If `instance-criteria=` is not specified, the oldest active task instance with the matching name will apply.) `instance-criteria=` Optional, if `task-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance. `workflow-instance-name=` For a task instance in a workflow, optional; Name of the workflow instance.
Example	uagcmd ops-task-clear-timewait -c config.cfg task-instance-name=Task A

Display All Tasks

Description	Displays all specified tasks.
Syntax	`uagcmd ops-task-list global parameters task-name=name [task-type=type]` Note For backward-compatibility, you can exclude `uagcmd` from the command line for this function and all pre-6.2.0.0 CLI functions.
Parameters	`task-name=` Optional; Name or partial name of one or more tasks. Wildcards are supported. `task-type=` Optional; One of the following (not case sensitive): application_control, email, email_monitor, agent_file_monitor, ftp, remote_file_monitor, indesca / universal_command / ucmd, manual, sap, peoplesoft, sql, stored_procedure, system_monitor, task_monitor, timer, unix, variable_monitor, web_service, windows, workflow, zos.
Example	uagcmd ops-task-list -c config.cfg task-name=Task A task-type=timer

Display Task Instance Status

Description	Displays the status of all task instance(s) associated with the specified task.
Syntax	`uagcmd ops-task-status global parameters task-instance-name=name [agent-name=name] [task-type=type] [task-status=status] [{workflow-instance-id=id] \| [workflow-instance-name=name}] [workflow-instance-criteria=criteria] [options=v]` Note For backward-compatibility, you can exclude `uagcmd` from the command line for this function and all pre-6.2.0.0 CLI functions.
Parameters	`task-name=` Required; Name or partial name of one or more tasks. Wildcards are supported. Deprecated Replaced by `task-instance-name=` parameter; the command first will check for `task-name=`; if it is not specified, the command will check for `task-instance-name=`. `task-instance-name=` Optional; Name of the task instance(s) to be listed. Wildcards are supported. `agent-name=` Optional; Name of the agent the task instance(s) are running on. `task-type=` Optional; One of the following (not case sensitive): application_control, email, email_monitor, agent file_monitor, ftp, remote_file_monitor, indesca / universal_command / ucmd, manual, sap, peoplesoft, sql, stored_procedure, system_monitor, task_monitor, timer, unix, variable_monitor, web_service, windows, workflow, zos. `task-status=` Optional; List of comma-separated task status codes and/or names (not case sensitive): status code or name,status code or name,...,status code or name. An exclamation mark (!) preceding a task status code or name excludes task instances with that status. `workflow-instance-id=` For a task instance in a workflow, optional if `workflow-instance-name=` is not specified; sys_id of the workflow instance. `workflow-instance-name=` For a task instance in a workflow, optional if `workflow-instance-id=` is not specified; Name of the workflow instance. (If `workflow-instance-criteria=` is not specified, the oldest active Workflow instance with the matching name will apply.) `workflow-instance-criteria=` Optional, if `workflow-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance. `options=` Optional; v (Return verbose results.)
Example	uagcmd ops-task-status -c config.cfg task-instance-name=mantask agent-name=managent task-type=manual

Task Instance Status Types

The following table describes all possible task instance statuses for all task types.

Note

The format of multi-word task status names specified in the Task Instance Status CLI function differs from the format of task status names used in the Controller user interface. In Task Instance Status, the words are separated by an underscore character; in the user interface, they are separated by a space.

Status Name	Status Code	Task Type	Description
Action_Required	60	Manual	When a manual task launches, it goes into Action Required status, meaning a user must perform some manual activity. For details, see Manual task.
Cancel_Pending	99	Agent-based	A process running on the Agent needs to be terminated. When the Cancel command is issued, the task instance will go into a Cancel Pending status until the Agent reports back that the process has been cancelled. At that point, the task instance will transition into the Cancelled status.
Cancelled	130	All	The task was cancelled by a user.
Confirmation_Required	125	z/OS	If you make JCL changes and restart a z/OS task, Universal Controller will put the task into Confirmation Required status and prompt you for a confirmation. For detailed processing steps, see Rerunning a z/OS Task.
Defined	0	All	The new task instance has been created (the task has been launched).
Exclusive_Requested	22	All	All tasks with a mutually exclusive task defined go immediately to a status of Exclusive Requested. If the task is available to run exclusively, the task then moves to the next appropriate processing status.
Exclusive_Wait	23	All	The task is mutually exclusive with one or more other tasks, and it is waiting for those tasks to finish before it will run.
Execution_Wait	33	Agent-based	The task must wait to be completed; either the Agent/Agent Cluster running the task has reached its Task Execution Limit, or the ability of the Agent/Agent Cluster to run tasks has been suspended.
Failed	140	All*	The task ran to a failure status.
Finished	190	All	The task was forced by the user to finish. The user may do this in cases where the task had a Cancelled or Failed status, and the user needed to release other task instances depending on the successful completion of this task instance in a workflow. For more information, see Force Finishing a Task.
Held	20	All	The task has been put on hold by a user.
In_Doubt	110	Agent-based	The Agent is "in doubt" about the current status of the task instance. This may occur if an Agent or Agent connection goes down. In this case, the Agent restarts and reviews its data about tasks in progress. If the Agent finds a task still running, it resumes normal monitoring. If the Agent cannot find the task, this usually indicates that the task completed, but the Agent considers the task status to be "in doubt."
Queued	40	Agent-based	The task has been queued on a resource.
Resource_Requested	25	All	All tasks with a virtual resource defined go immediately to a status of Resource Requested. If the resource is available, the task then moves to the next appropriate processing status.
Resource_Wait	30	All	All tasks with a virtual resource defined go immediately to a status of Resource Requested. If the resource is not available, the task goes to a status of Resource Wait. When the resource becomes available, the task moves to the next appropriate processing status
Running	80	All	The task is running. For Agent-based tasks, the Agent has started running the program.
Running/Problems	81	Workflow	One or more tasks within the workflow has one of the following statuses: Cancelled Confirmation Required Failure In Doubt Running/Problems (for sub-workflows) Start Failure Undeliverable
Skipped	180	All	The task was skipped by a user.
Start Failure	120	All	The task was unable to start.
Started	70	Agent-based, Manual	The task has started. For Agent-based tasks, this means the Agent has received the task.
Submitted	43	z/OS	The task has been submitted to the z/OS Job Entry subsystem and scheduled by the z/OS Job Scheduler.
Success	200	All	The task has completed successfully. Workflows will transition to Success status when all of its tasks have transitioned to Success, Finished, or Skipped status.
Time_Wait	15	All (except Timer)	The task is waiting to start based on a Wait To Start and/or Delay On Start specification.
Undeliverable	35	Agent-based	The Agent is unavailable.
Waiting	10	All	The task has been loaded by a workflow and is waiting on a predecessor.

* Workflows cannot go to Failed status.

Force Finish a Task

Description	Force finishes the specified task instance. See Force Finishing a Task Instance for a description of behavior and restrictions.
Syntax	`uagcmd ops-task-forcefinish global parameters {task-instance-id=ID \| task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name]` Note For backward-compatibility, you can exclude `uagcmd` from the command line for this function and all pre-6.2.0.0 CLI functions.
Parameter	`task-instance=` Required; An internal Universal Controller Identifier Deprecated Replaced by `task-instance-id=` parameter; the command first will check for `task-instance=`; if it is not specified, the command will check for `task-instance-id=`. `task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance to run the command on. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the task instance to run the command on. (If `instance-criteria=` is not specified, the oldest active task instance with the matching name will apply.) `instance-criteria=` Optional, if `task-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance `workflow-instance-name=` For a task instance in a workflow, optional; Name of the workflow instance.
Example	uagcmd ops-task-forcefinish -c config.cfg task-instance-id=90079020d861e5e40128cbb3cdbe1cf3

Launch a Task

Description	Launches the specified task(s).
Syntax	`uagcmd ops-task-launch global parameters [task-type=type] task-name=name {time-zone=Australia/Sydney] [hold=option] [task-variables=variables] [virtual-resource-priority=priority] [virtual-resources=resources]` Note For backward-compatibility, you can exclude `uagcmd` from the command line for this function and all pre-6.2.0.0 CLI functions.
Parameters	`task-type`= Optional; One of the following (not case sensitive): timer, windows, unix, zos, agent_file_monitor, manual, email, email_monitor, ftp, sql, remote_file_monitor, task_monitor, stored_procedure, workflow, sap, peoplesoft, system_monitor, indesca / universal_command / ucmd, web_service, application_control. `task-name=` Required; Valid task name. Wildcards are supported. `time-zone=` Optional; Time zone in which the task is launched. `hold=` Optional; Specification for whether to place the task in Held status when it is launched. Valid values are (not case sensitive): yes/y/true. `task-variables=` Optional; Any variables specified in the task that need a value to run properly. `virtual-resource-priority=` Optional; Virtual resource priority of the task instance. Valid values are any integer between 1 and 20. Defaults to the virtual resource priority defined in the task Details. `virtual-resources=` Optional; Comma-separated list of <resource-name>:<amount> pairs. For example, VR1:10,VR2:20,...,VRN:N. An amount of 0 indicates the virtual resource should be dropped. Defaults to virtual resources defined in the task Details. The virtual resource dependencies specified in `virtual-resources=` are merged with the default virtual resource dependencies. If a default virtual resource dependency already exists for a specified virtual resource amount, the virtual resource dependency is updated. Any virtual resource specified with an amount of 0 is dropped from the default virtual resource dependencies; if the virtual resource did not exist as a default dependency, the command will fail. If a default virtual resource dependency does not already exist for a specified virtual resource amount, the virtual resource dependency is added.
Example	(All variable=value pairs must be specified within one set of braces.) uagcmd ops-task-launch -c config.cfg task-name=Windows Task A task-variables={variable1=first value variable2=second value}

Put Task on Hold

Description	Puts the specified task instance on hold. See Putting a Task Instance on Hold for a description of behavior and restrictions.
Syntax	`uagcmd ops-task-hold global parameters {task-instance-id=ID \| task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name]` Note For backward-compatibility, you can exclude `uagcmd` from the command line for this function and all pre-6.2.0.0 CLI functions.
Parameter	`task-instance=` Required; An internal Universal Controller identifier Deprecated Replaced by `task-instance-id=` parameter; the command first will check for `task-instance=`; if it is not specified, the command will check for `task-instance-id=`. `task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance to run the command on. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the task instance to run the command on. (If `instance-criteria=` is not specified, the oldest active task instance with the matching name will apply.) `instance-criteria=` Optional, if `task-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance `workflow-instance-name=` For a task instance in a workflow, optional; Name of the workflow instance.
Example	uagcmd ops-task-hold -c config.cfg task-instance=90079020d861e5e40128cbb3cdbe1cf3

Release a Task from Hold

Description	Releases the specified task instance from hold. See Releasing a Task Instance from Hold for a description of behavior and restrictions.
Syntax	`uagcmd ops-task-release global parameters {task-instance-id=ID \| task-instance-id=name} [instance-criteria=criteria] [workflow-instance-name] [recursive=option]` Note For backward-compatibility, you can exclude `uagcmd` from the command line for this function and all pre-6.2.0.0 CLI functions.
Parameter	`task-instance=` Required; An internal Universal Controller identifier Deprecated Replaced by `task-instance-id=` parameter; the command first will check for `task-instance=`; if it is not specified, the command will check for `task-instance-id=`. `task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance to run the command on. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the task instance to run the command on. (If `instance-criteria=` is not specified, the oldest active task instance with the matching name will apply.) `instance-criteria=` Optional, if `task-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance `workflow-instance-name=` For a task instance in a workflow, optional; Name of the workflow instance. `recursive=` Optional; Specification (yes or no), if the task instance specified in `task-instance-id=` or `task-instance-name=` is a workflow, for whether or not to release the held workflow recursively. (Default is no.) If the task instance is not a workflow, `recursive=` is ignored.
Example	uagcmd ops-task-release -c config.cfg task-instance-id=90079020d861e5e40128cbb3cdbe1cf3

Rerun a Task

Description	Reruns the specified Task instance. See Re-running a Task Instance for a description of behavior and restrictions.
Syntax	`uagcmd ops-task-rerun global parameters {task-instance-id=ID \| task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name] {[task-status=status [recursive=option]]`} Note For backward-compatibility, you can exclude `uagcmd` from the command line for this function and all pre-6.2.0.0 CLI functions.
Parameter	`task-instance=` Required; An internal Universal Controller identifier Deprecated Replaced by `task-instance-id=` parameter; the command first will check for `task-instance=`; if it is not specified, the command will check for `task-instance-id=`. `task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance to run the command on. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the task instance to run the command on. (If `instance-criteria=` is not specified, the oldest active task instance with the matching name will apply.) `instance-criteria=` Optional, if `task-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance `workflow-instance-name=` Optional; Name of the workflow instance. `task-status=` Optional; list of comma-separated status codes or case-insensitive status names (see below). Format: <:status-code-or-name>,<status-code-or-name>,...,<status-code-or-name>. Applicable only if matched task instance is workflow type; command will fail otherwise. All tasks within the matching workflow with a matching status will be queued for re-run. Sub-workflows do not support re-run directly; the `recursive=` parameter controls whether or not tasks within sub-workflows matching the status will be queued for re-run. Start_Failure (120) Cancelled (130) Failed (140) Finished (190) Success (200) `recursive=` Optional if `task-status=` is specified; One of the following (not case-sensitive): Yes\|Y\|true or No\|N\|false (default). Indicates whether or not tasks within sub-workflows will qualify for re-run.
Example	uagcmd ops-task-rerun -c config.cfg task-instance=8fda93dcd861e5e4005bf48e2cad6206 task-status=140

Set Manual Task to Started

Description	For a Manual task, changes its status from Action Required to Started. This allows you to acknowledge the Manual task and indicate that the manual procedures have been started.
Syntax	`uagcmd ops-manual-setstarted global parameters {task-instance-id=ID \| task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name]` Note For backward-compatibility, you can exclude `uagcmd` from the command line for this function and all pre-6.2.0.0 CLI functions.
Parameter	`task-instance=` Required; An internal Universal Controller identifier Deprecated Replaced by `task-instance-id=` parameter; the command first will check for `task-instance=`; if it is not specified, the command will check for `task-instance-id=`. `task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance to run the command on. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the task instance to run the command on. (If `instance-criteria=` is not specified, the oldest active task instance with the matching name will apply.) `instance-criteria=` Optional, if `task-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance `workflow-instance-name=` For a task instance in a workflow, optional; Name of the workflow instance.
Example	uagcmd ops-manual-setstarted -c config.cfg task-instance=8fda93dcd861e5e4005bf48e2cad6206

Set Manual Task to Success

Description	For a Manual task, sets its status to Success.
Syntax	`uagcmd ops-manual-setcompleted global parameters {task-instance-id=ID \| task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name]` Note For backward-compatibility, you can exclude `uagcmd` from the command line for this function and all pre-6.2.0.0 CLI functions.
Parameter	`task-instance=` Required; An internal Universal Controller identifier Deprecated Replaced by `task-instance-id=` parameter; the command first will check for `task-instance=`; if it is not specified, the command will check for `task-instance-id=`. `task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance to run the command on. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the task instance to run the command on. (If `instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)` `instance-criteria= Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance` `workflow-instance-name= For a task instance in a workflow, optional; Name of the workflow instance.`
Example	uagcmd ops-manual-setcompleted -c config.cfg task-instance=8fda93dcd861e5e4005bf48e2cad6206

Set or Modify Wait Time for a Task Instance

Description	Sets or modifies the Wait time for a task instance that specifies how long it will wait to run after it has become eligible to run.
Syntax	`uagcmd ops-task-set-timewait global parameters {task-instance-id=ID \| task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name] {wait-type=type [wait-day-constraint=constraint] {wait-time=wait time \| wait-duration=duration \| wait-seconds=duration in seconds} \| delay-type=type {delay-duration=duration \| delay-seconds=duration in seconds`}}
Parameters	`task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the time task instance. (If `instance-criteria=` is not specified, the oldest active task instance with the matching name will apply.) `instance-criteria=` Optional, if `task-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance. `workflow-instance-name=` For a task instance in a workflow, optional; Name of the workflow instance. (The most recently created workflow instance with the matching name will apply.) `wait-type=` Required if `delay-type=` is not specified; one of the following (not case sensitive): none, time, relative_time, duration, seconds. `wait-time=` Required if `wait-type=`time or relative_time; Wait time in format HH:MM. Variables are supported. `wait-day-constraint=` Optional if `wait-type=`time or relative_time; One of the following (not case sensitive): none, same day/same_day, next day/next_day, next business day/next_business_day, sunday, monday, tuesday, wednesday, thursday, friday, saturday. `wait-duration=` Required if `wait-type=`duration; Wait duration in format DD:HH:MM:SS. `wait-seconds=` Required if `wait-type=`seconds; Wait duration in format SS. Variables are supported. `delay-type=` Required if `wait-type=` is not specified; One of the following (not case sensitive): none, duration, seconds. `delay-duration=` Required if `delay_type=`duration; Specific delay duration in format DD:HH:MM:SS. `delay-seconds=` Required if `delay_type=`seconds; Specific delay duration in format SS. Variables are supported.
Example	uagcmd ops-task-set-timewait -c config.cfg task-instance-name=Task 5A workflow-instance-name=Workflow A wait-type=time wait-time=18:00

Set Task Priority

Description	For Agent-based tasks (Linux/Unix, Universal, Windows, and z/OS), changes the priority on the specified task instance. See Changing the Priority of a Task Instance for a description of behavior and restrictions.
Syntax	`uagcmd ops-task-setpriority global parameters {task-instance-id=ID \| task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name] priority=priority`
Parameters	`task-instance=` Required; An internal Universal Controller identifier Deprecated Replaced by `task-instance-id=` parameter; the command first will check for `task-instance=`; if it is not specified, the command will check for `task-instance-id=`. `task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance to run the command on. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the task instance to run the command on. (If `instance-criteria=` is not specified, the oldest active task instance with the matching name will apply.) `instance-criteria=` Optional, if `task-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance `workflow-instance-name=` For a task instance in a workflow, optional; Name of the workflow instance. `priority=` Required; One of the following (not case sensitive): high, medium, low.
Example	uagcmd ops-task-setpriority -c config.cfg task-instance=90079026d861e5e400bba81913a4fdd0 priority=high

Skip a Task

Description	Skips the specified task instance. See Skipping a Task Instance for a description of behavior and restrictions.
Syntax	`uagcmd ops-task-skip global parameters {task-instance-id=ID \| task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name]`
Parameter	`task-instance=` Required; An internal Universal Controller identifier Deprecated Replaced by `task-instance-id=` parameter; the command first will check for `task-instance=`; if it is not specified, the command will check for `task-instance-id=`. `task-instance-id=` Required if `task-instance-name=` is not specified; sys_id of the task instance to run the command on. `task-instance-name=` Required if `task-instance-id=` is not specified; Name of the task instance to run the command on. (If `instance-criteria=` is not specified, the oldest active task instance with the matching name will apply.) `instance-criteria=` Optional, if `task-instance-name=` is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance `workflow-instance-name=` For a task instance in a workflow, optional; Name of the workflow instance.
Example	uagcmd ops-task-skip -c config.cfg task-instance=90079026d861e5e400bba81913a4fdd0

Browser not supported