----
UNV3100A XMI audit level: level
...
Universal Connector
----UNV3100E The transfer message 'id' was not understood.
...
Component
Universal Data Mover
----UNV3101A Max XBP: version
UNV3101W Primary and second logical names cannot be the same.
DescriptionDisplays the Maximum version of the SAP XBP interface that will be used during USAP execution.SeverityAuditSystem ActionNone.User ActionNone required.Component
Universal Connector
...
UNV3101W Primary and second logical names cannot be the same.
DescriptionThe primary and secondary logical names are the same. The primary and secondary logical names are the same. They must be different.
Severity
...
Component
Universal Data Mover
----
UNV3102A User ID: userid
...
Universal Connector
----UNV3102W Record is larger than value UNV3102W Record is larger than value of linelen without truncation or wrapping. Data will be lost.
...
Component
Universal Data Mover
----UNV3103A Command ID: cmdid
UNV3103W Failed to buffer output. Data is larger than the output buffer.
DescriptionDisplays the identifier used to identify the unit of work represented by a USAP command and the associated SAP job.SeverityAuditSystem ActionNone.User ActionNone required.Component
Universal Connector
...
UNV3103W Failed to buffer output. Data is larger than the output buffer.
DescriptionUDM tried to write UDM tried to write record data that is larger than its output buffer.
...
Component
Universal Data Mover
----
UNV3104A Secure CFT: securecft
...
Universal Connector
...
UNV3105A CFT command prefix: prefix
...
Universal Connector
...
UNV3106A CFT target host: prefix
...
Universal Connector
...
UNV3107A Allow auto-restart: opt
...
Universal Connector
...
UNV3108A Restart: opt
...
Universal Connector
...
UNV3109A CFT ABAP program: pgm
...
Universal Connector
...
UNV3110A Language: lang
...
Universal Connector
...
UNV3111A Trace table size: size, print condition: cond
...
None required.
...
Universal Connector
...
UNV3112A RFC logon retry interval: interval
...
Universal Connector
...
UNV3113A RFC logon retry count: count
DescriptionDisplays the number of unsuccessful RFC logon retry attempts that can occur before USAP terminates the logon process and ends unsuccessfully.SeverityAuditSystem ActionNoneUNV3150E Keep alive interval lapsed in 'func', closing session.
Description
A keep alive message had not been sent and processed within the given time period and the transfer session was terminated.
func Name of the function where the failure occurred.
Severity
Error
System Action
The transfer session is terminated
User Action
Check the status of the network between all UDM instances. If the problem persists, contact Stonebranch Technical Support.
Component
Universal Data Mover
----
UNV3151E Failed to send keep alive message, closing session.
Description
The UDM Manager could not send a keep alive message as required.
Severity
Error
System Action
The transfer session is terminated
User Action
Check the status of the network between all UDM instances. If the problem persists, contact Stonebranch Technical Support.
Component
Universal Data Mover
----
UNV3152I Reconnection attempt number count of max in interval seconds.
Description
The manager has lost its connections to the server due to a network fault. The manager will attempt to reconnect to the broker in interval seconds. This is attempt number count of max attempts.
Severity
Informational
System Action
The session recovery process continues.
User Action
No action required.
Component
Universal Data Mover
----
UNV3153E Error connecting session session for recovery: func, errno, reason
Description
UCMD Manager was attempting to recover a lost network connection. An error occurred while accepting a new connection for the session session. The error occurred in function func. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, the manager will attempt to recover the connection with the server. The manager must initiate a new connection with the server. If the error was not due to a network fault, the server terminates.
User Action
Make sure a network connection is available between the manager and server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3154W Error cleaning up recovered session session: func, errno, reason
Description
An error occurred while closing a recovered session named session. A new session has been successfully created, and the old session was being cleaned up. func is the name of the function in which the error occurred. errno is error number. reason is an explanation of the error.
Severity
Warning
System Action
The program continues.
User Action
No action is required.
Component
Universal Data Mover
----
UNV3155E Error renegotiating sessname session options: func, errno, reason
Description
The manager is attempting to reestablish network connections after a network fault was detected. A connection was reestablished, but the manager and server were not able to renegotiate session options. Renegotiation was taking place for the sessname session. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation the error.
Severity
Error
System Action
If the error was due to a network fault, connection recovery starts over. If the error was not due to a network fault, the program terminates.
User Action
Make sure a network connection is available between the UDM and Universal Broker machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3156E Session name mismatch for recovered session session.
Description
UDM was attempting to recover a lost network connection. The manager was reestablishing the session session, but the server was expecting a different session.
Severity
Error
System Action
The session recovery process restarts.
User Action
The condition should correct itself. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3157E Error sending FORWARD_ID message to server: func, errno, reason
Description
UDM is attempting to reestablish network connections after a network fault was detected. A connection was reestablished, but the UDM components not agree on for which session it was for. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation the error.
Severity
Error
System Action
If the error was due to a network fault, connection recovery starts over. If the error was not due to a network fault, the program terminates.
User Action
Make sure a network connection is available between the UDM and Universal Broker machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3158I Connecting to broker at ipaddr, port.
Description
Indicates that Universal Data Mover is trying to connect to Universal Broker at internet address ipaddr on port port.
Severity
Informational
System Action
The program continues.
User Action
None required.
Component
Universal ConnectorData Mover
----
UNV3114A RFC listen interval: interval
...
Universal Connector
...
UNV3115A RFC timeout: interval
...
Universal Connector
...
UNV3116A RFC retry interval: interval
...
Universal Connector
...
UNV3117A RFC retry count: count
...
Universal Connector
...
UNV3118A RFC trace directory: path
...
Universal Connector
...
UNV3119A Command file: file
...
Universal Connector
...
UNV3120A Encrypted command file: file
...
Universal Connector
...
UNV3121A Encryption key: file
...
Universal Connector
...
UNV3122A Issuing command: cmd
...
Universal Connector
...
UNV3123A Definition file: filename
...
Universal Connector
...
UNV3124A Job name: jobname
...
Universal Connector
...
UNV3125A Job ID: jobid
...
Universal Connector
...
UNV3126A Target job name: jobname
...
Universal Connector
...
UNV3127A Job name: jobname
...
Universal Connector
...
UNV3128A Job ID: jobid
...
Universal Connector
...
UNV3129A Target server: server
...
Universal Connector
...
UNV3130A Job name: jobname
...
Universal Connector
...
UNV3131A Job ID: jobid
...
Universal Connector
...
UNV3132A Job status check interval: interval
...
Universal Connector
...
UNV3133A Poll interval: interval
...
Universal Connector
...
UNV3134A Terminated exit code: exitcode
...
Universal Connector
...
UNV3135A Finished exit code: exitcode
...
Universal Connector
...
UNV3136A Purge successfully completed job: opt
...
Universal Connector
...
UNV3137A Print job log: opt
...
Universal Connector
...
UNV3138A Max job log size: size
...
Universal Connector
...
UNV3139A Print spool list: opt
...
Universal Connector
...
UNV3140A Max spool list size: size
...
Universal Connector
...
UNV3141A Print syslog on error: opt
...
Universal Connector
...
UNV3142A Syslog pre-time: seconds
...
Universal Connector
...
UNV3143A Syslog post-time: seconds
...
Universal Connector
...
UNV3144A Wait for child jobs: opt
...
Universal Connector
...
UNV3145A Max child depth: opt
...
Universal Connector
...
UNV3146A Print job log for child jobs: opt
...
Universal Connector
...
UNV3147A Print spool lists for child jobs: opt
...
Universal Connector
...
UNV3148A Purge child jobs: opt
...
Universal Connector
...
UNV3149A Job name: jobname
...
Universal Connector
...
UNV3150A Job ID: jobid
...
Universal Connector
...
UNV3150E Keep alive interval lapsed in 'func', closing session.
...
func Name of the function where the failure occurred.
...
Universal Data Mover
...
UNV3151A Job name: jobname
...
Universal Connector
...
UNV3151E Failed to send keep alive message, closing session.
...
Universal Data Mover
...
UNV3152A Job ID: jobid
...
Universal Connector
...
UNV3152I Reconnection attempt number count of max in interval seconds.
...
Universal Data Mover
...
UNV3153A Command mask: mask
...
Universal Connector
...
UNV3153E Error connecting session session for recovery: func, errno, reason
...
Universal Data Mover
...
UNV3154A Command operating system: opsys
...
Universal Connector
...
UNV3154W Error cleaning up recovered session session: func, errno, reason
...
Universal Data Mover
...
UNV3155A Client: opsys
...
Universal Connector
...
UNV3155E Error renegotiating sessname session options: func, errno, reason
...
Universal Data Mover
...
UNV3156A Job name: jobname
...
Universal Connector
...
UNV3156E Session name mismatch for recovered session session.
...
Universal Data Mover
...
UNV3157A Job ID: id
...
Universal Connector
...
UNV3157E Error sending FORWARD_ID message to server: func, errno, reason
...
Universal Data Mover
...
UNV3158A Job name: jobname
...
Universal Connector
...
UNV3158I Connecting to broker at ipaddr, port.
...
Universal Data Mover
...
UNV3159A Job ID: id
...
Universal Connector
...
UNV3159E Error sending reconnect message in func(errno): reason
...
Universal Data Mover
...
UNV3160A Short name: mask
...
Universal Connector
...
UNV3160E Error connecting session session for recovery: func, errno, reason
...
Universal Data Mover
...
UNV3161A Long name: mask
...
Universal Connector
...
UNV3161E Error connecting to component via broker: func, errno, reason
...
Universal Data Mover
...
UNV3162A Printer name: name
...
Universal Connector
...
UNV3162E A network error occurred in func: (errno) reason
...
Universal Data Mover
...
UNV3163A Layout name: mask
...
Universal Connector
...
UNV3163E Connection reestablishment successfully completed.
...
error.
...
Universal Data Mover
...
UNV3164A Queue ID: qid
...
Universal Connector
...
UNV3164E Connection reestablishment has restarted.
...
Universal Data Mover
...
UNV3165A ABAP name: mask
...
Universal Connector
...
UNV3165E Error accepting session session for recovery: func, errno, reason
...
Universal Data Mover
...
UNV3166A Max hit count: mask
...
Universal Connector
...
UNV3166E Connection reestablishment failed.
...
Universal Data Mover
...
UNV3167A Job name: jobname
...
Universal Connector
...
UNV3167E Error renegotiating recovered session session options: func, errno, reason
...
Universal Data Mover
...
UNV3168A Job ID: id
...
Universal Connector
...
UNV3168E Session name mismatch for recovered session session.
...
Universal Data Mover
...
UNV3169A Job step number: stepnumber
...
Universal Connector
...
UNV3169E Error sending an acknowledgement in response to the FORWARD_ID message on session session:func, errno, reason
...
Universal Data Mover
...
UNV3170A Spool list translation table: translationtable
...
Universal Connector
...
UNV3170E Error processing FORWARD_ID message in func: (errno) reason
...
Universal Data Mover
...
UNV3171A Job name: jobname
...
Universal Connector
...
UNV3171I Reconnection attempt count started.
...
Universal Data Mover
...
UNV3172A Job ID: id
...
Universal Connector
...
UNV3172E Session closed due to keep alive interval lapsing.
...
Universal Data Mover
...
UNV3173A Scheduled exit code mapping: exitcode
...
Universal Connector
...
UNV3174A Ready exit code mapping: exitcode
...
Universal Connector
...
UNV3175A Released exit code mapping: exitcode
...
Universal Connector
...
UNV3176A Active exit code mapping: exitcode
...
Universal Connector
...
UNV3177A Finished exit code mapping: exitcode
...
Universal Connector
...
UNV3178A Terminated exit code mapping: exitcode
...
Universal Connector
...
UNV3179A Variant name: name
...
Universal Connector
...
UNV3180A Variant language: language
...
Universal Connector
...
UNV3181A ABAP name: name
...
Universal Connector
...
UNV3182A ABAP name: name
...
Universal Connector
...
UNV3183A Variant selection: opt
...
Universal Connector
...
UNV3184A Job name mask: mask
...
Universal Connector
...
UNV3185A Job id mask: mask
...
Universal Connector
...
UNV3186A Job selection user ID: userid
...
Universal Connector
...
UNV3187A Scheduled: opt
...
Universal Connector
...
UNV3188A Ready: opt
...
Universal Connector
...
UNV3189A Released: opt
...
Universal Connector
...
UNV3190A Running: opt
...
Universal Connector
...
UNV3190I Session option, opt, set to val
...
Universal Data Mover
...
UNV3191A Finished: opt
...
Universal Connector
...
UNV3191E Failed changing server job CCSID to ccsid. System issued message: msgid
...
Universal Data Mover
...
UNV3192A Aborted: opt
...
Universal Connector
...
UNV3192I Found null host/user values. udm_mgr_access rules may not be enforced.
...
Universal Data Mover
...
UNV3193A No start date: opt
...
Universal Connector
...
UNV3194A With predecessor: opt
...
Universal Connector
...
UNV3195A From date: date
...
Universal Connector
...
UNV3196A From time: time
...
Universal Connector
...
UNV3197A To date: date
...
Universal Connector
...
UNV3198A To date: time
...
Universal Connector
...
UNV3199A From date: date
DescriptionDisplays the earliest date to use for job selection.SeverityAuditSystem ActionNone.User ActionNone required.ComponentUniversal ConnectorUNV3159E Error sending reconnect message in func(errno): reason
Description
Universal Data Mover was unable to send a request to Universal Broker to reconnect to the Universal Data Mover component. This error will also be displayed if the Broker rejected the message due to the state of the Universal Data Mover Server. The Broker will also reject the request if the Universal Data Mover Server component cannot be found. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the Broker rejected the reconnect request due to the state of the UDM Server, the manager may re-send the request, depending on the Server's state. If the Broker rejected the request for some other reason, the reconnect request will not be re-sent. If the request can't be re-sent, or some other error occurred, the program will terminate. If the request can be re-sent, the Manager will continue to do so until the number of reconnect attempts exceeds the retry count in the Manager's configuration.
User Action
Examine the error messages to identify the reason the request was not processed. Make sure the UDM Server component UDM is trying to reconnect to is still running, and is in a DISCONNECTED state. Make sure a network connection is still available between the client and server machines. Check the Universal Broker message log for any errors reported by Universal Broker. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3160E Error connecting session session for recovery: func, errno, reason
Description
UDM was attempting to recover a lost network connection. An error occurred while accepting a new connection for the session session. The error occurred in function func. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, the manager will attempt to recover the connection with the server. The manager must initiate a new connection with the server. If the error was not due to a network fault, the server terminates.
User Action
Make sure a network connection is available between UDM and the server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3161E Error connecting to component via broker: func, errno, reason
Description
An attempt by Universal Data Mover to set up standard I/O redirection connections to UDM Server by sending a request to Universal Broker has failed. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure a network connection is available between the UDM and Universal Broker machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3162E A network error occurred in func: (errno) reason
Description
A network error was detected. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The network connections will be reestablished with the server and the data transfers will continued from their last successful point.
User Action
Make sure a network connection is still available between the client and server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3163E Connection reestablishment successfully completed.
Description
A network error caused the UDM to reestablish network connections with the server. The connections have been successfully reestablished.
error.
Severity
Error
System Action
Universal Data Mover continues its processing from the point prior to the network error.
User Action
No action required.
Component
Universal Data Mover
----
UNV3164E Connection reestablishment has restarted.
Description
UDM Transfer Server has restarted the recovery of the connections.
Severity
Error
System Action
Connection reestablishment continues.
User Action
Make sure a network connection is available between all UDM machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3165E Error accepting session session for recovery: func, errno, reason
Description
UCMD Server was attempting to recover a lost network connection. An error occurred while accepting a new connection for the session session. The error occurred in function func. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, the server will attempt to recover the connection with UDM. The UDM must initiate a new connection with the server. If the error was not due to a network fault, the server terminates.
User Action
Make sure a network connection is available between the UDM and server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3166E Connection reestablishment failed.
Description
The server failed to reestablish network connections with UDM.
Severity
Error
System Action
The program terminates.
User Action
Review previously issued messages and messages issued by UDM to determine the cause of the failure.
Component
Universal Data Mover
----
UNV3167E Error renegotiating recovered session session options: func, errno, reason
Description
An error occurred while renegotiating session options for the recovered session named session. The error occurred in function func. The error code is specified by errno and its description by reason.
Severity
Error
System Action
The recovery action terminates. If the error is considered recoverable, the network connections will be reestablished, else the program terminates.
User Action
Should the problem persist or if the error is non-recoverable, contact Stonebranch Customer Support.
Component
Universal Data Mover
----
UNV3168E Session name mismatch for recovered session session.
Description
UCMD Server was attempting to recover a lost network connection. The server was reestablishing the session session, but the manager was reestablishing a different session.
Severity
Error
System Action
The session recovery process restarts. The server sends a negative acknowledgement back to the manager to indicate a recovery restart.
User Action
The condition should correct itself. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3169E Error sending an acknowledgement in response to the FORWARD_ID message on session session:func, errno, reason
Description
UCMD Server was attempting to recover a lost network connection. An error occurred while reestablishing a new connection for the session session. The error occurred in function func. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, the server will attempt to recover the connection with UDM. UDM must initiate a new connection with the server. If the error was not due to a network fault, the server terminates.
User Action
Make sure a network connection is available between the UDM and the server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3170E Error processing FORWARD_ID message in func: (errno) reason
Description
An error occurred while processing the FORWARD_ID message from UDM The FORWARD_ID message is part of the manager and server protocol used to reestablish lost TCP/IP connections. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, connection recovery starts over. If the error was not due to a network fault, the program terminates.
User Action
Make sure the network connection between the client and server machines is still available. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3171I Reconnection attempt count started.
Description
UDM is beginning to make its count attempt to reestablish its session.
Severity
Informational
System Action
Universal Data Mover attempts to establish a network connection with one. of its components in a transfer session.
User Action
No action required.
Component
Universal Data Mover
----
UNV3172E Session closed due to keep alive interval lapsing.
Description
A keep alive message had not been sent and processed within the given time period and the transfer session was terminated.
Severity
Error
System Action
The transfer session is terminated
User Action
Check the status of the network between all UDM instances. If the problem persists, contact Stonebranch Technical Support.
Component
Universal Data Mover
----
UNV3190I Session option, opt, set to val
Description
The session option, opt was set to a value of val.
Severity
Informational
System Action
The session option has been set.
User Action
No action required
Component
Universal Data Mover
----
UNV3191E Failed changing server job CCSID to ccsid. System issued message: msgid
Description
An error occurred in command CHGJOB CCSID(xxx).
Severity
Error
System Action
This error may be caused by either changing the UBROKER profile access authorities or by changing the CHGJOB command access authorities. Check the associated error message for additional diagnostic information.
User Action
Insure that the UBROKER profile has access to the CHGJOB command. Correct problems as indicated by the associated system message. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3192I Found null host/user values. udm_mgr_access rules may not be enforced.
Description
The udm_mgr_access rule was introduced in the 3.2.0 release. Pre-3.2.0 managers supply neither manager host names nor user IDs. Therefore, udm_mgr_access rules, other than those with host name 'ALL' and user ID '*', will not be enforced with pre 3.2.0 managers.
Severity
Informational
System Action
Processing continues unless a udm_mgr_access rule exists that denies access to all unrecognized UDM Managers (e.g., udm_mgr_access ALL,*,*,deny,auth).
User Action
Upgrade the UDM Manager to 3.2.0.0 or later.
Component
Universal Data Mover