----
UNV3100A XMI audit level: level
Description
Displays the XMI audit level that will be used for the RFC session.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3100E The transfer message 'id' was not understood.
Description
UDM received a transfer message it did not understand.
id Id of the transfer message.
Severity
Error
System Action
The transfer operation is aborted
User Action
If the problem persists, contact Stonebranch Technical Support.
Component
Universal Data Mover
----
UNV3101A Max XBP: version
Description
Displays the Maximum version of the SAP XBP interface that will be used during USAP execution.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3101W Primary and second logical names cannot be the same.
Description
The primary and secondary logical names are the same. They must be different.
Severity
Warning
System Action
A warning is issued
User Action
Rephrase the command so that the primary and secondary logical names are different.
Component
Universal Data Mover
----
UNV3102A User ID: userid
Description
Displays the SAP user ID with which to logon to the SAP system.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3102W Record is larger than value of linelen without truncation or wrapping. Data will be lost.
Description
The length of the record is longer than the maximum set by the 'linelen' attribute. The 'wrapline' and 'truncline' attributes are both set to 'no'. Proceeding with the transfer would result in unexpected data loss.
Severity
Warning
System Action
An error is issued and the transfer request is terminated
User Action
The data in the file did not fit the set parameters. Lines can be wrapped by setting the 'wrapline' attribute to 'yes' or truncated by setting the 'truncline' attribute to 'yes'.
Component
Universal Data Mover
----
UNV3103A Command ID: cmdid
Description
Displays the identifier used to identify the unit of work represented by a USAP command and the associated SAP job.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3103W Failed to buffer output. Data is larger than the output buffer.
Description
UDM tried to write record data that is larger than its output buffer.
Severity
Warning
System Action
An error is issued and the transfer request is terminated
User Action
Contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3104A Secure CFT: securecft
Description
Displays the mode of client fault tolerance to be used for the command. A value of yes indicates that secure CFT will be used. A value of no indicates that the original CFT mode will be used.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3105A CFT command prefix: prefix
Description
In pre-XBP 2.0 CFT mode, displays the prefix command required for the operating system of the target host.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3106A CFT target host: prefix
Description
In pre-XBP 2.0 CFT mode, displays the prefix command required for the operating system of the target host.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3107A Allow auto-restart: opt
Description
Displays whether or not a RESTART value of AUTO is allowed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3108A Restart: opt
Description
Displays whether or not this execution of USAP is a restart of a previous client fault tolerant USAP command.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3109A CFT ABAP program: pgm
Description
Displays the ABAP program that will be used for the command ID job step.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3110A Language: lang
Description
Displays the language in which messages are displayed. lang is the language.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3111A Trace table size: size, print condition: cond
Description
Displays the size of the memory trace table in bytes and the conditions under which the trace table is printed when the program ends.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3112A RFC logon retry interval: interval
Description
Displays the number of seconds that will elapse between a failed RFC logon attempt and the retry of that logon attempt.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3113A RFC logon retry count: count
Description
Displays the number of unsuccessful RFC logon retry attempts that can occur before USAP terminates the logon process and ends unsuccessfully.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3114A RFC listen interval: interval
Description
Displays the number of seconds that will elapse between RFC listen calls.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3115A RFC timeout: interval
Description
Displays the number of seconds that can elapse before USAP considers an RFC call to have timed out.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3116A RFC retry interval: interval
Description
Displays the number of seconds that will elapse between a failed RFC call and the retry of that call.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3117A RFC retry count: count
Description
Displays the number of unsuccessful RFC call retry attempts that can occur before USAP terminates the RFC call retry process and ends unsuccessfully.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3118A RFC trace directory: path
Description
Displays the directory where RFC trace files will be written.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3119A Command file: file
Description
Displays the name of a plain text command file.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3120A Encrypted command file: file
Description
Displays the name of an encrypted command file.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3121A Encryption key: file
Description
Displays the key used to encrypt the command file.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3122A Issuing command: cmd
Description
Displays a command that will be issued.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3123A Definition file: filename
Description
Displays the definition file that will be used for the submission command.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3124A Job name: jobname
Description
Displays the name of the SAP job that will be used as a model for job submission.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3125A Job ID: jobid
Description
Displays the ID of the SAP job that will be used as a model for job submission.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3126A Target job name: jobname
Description
Displays the name that will be used for the newly submitted SAP job.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3127A Job name: jobname
Description
Displays the name of the SAP job that will be started.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3128A Job ID: jobid
Description
Displays the ID of the SAP job that will be started.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3129A Target server: server
Description
Displays SAP server on which the SAP job will be started.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3130A Job name: jobname
Description
Displays the name of the SAP job that will be waited for.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3131A Job ID: jobid
Description
Displays the ID of the SAP job that will be waited for.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3132A Job status check interval: interval
Description
Displays the length of time that can elapse, without a change in job status, before a call will be made to synchronize the SAP job status, as reported by the SAP system, with the SAP job status stored in the SAP database.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3133A Poll interval: interval
Description
Displays the length of time to wait between job status calls to the SAP system.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3134A Terminated exit code: exitcode
Description
Displays the USAP exit code for the SAP job terminated status.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3135A Finished exit code: exitcode
Description
Displays the USAP exit code for the SAP job finished status.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3136A Purge successfully completed job: opt
Description
Displays the option to purge the job that has successfully completed processing from SAP system.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3137A Print job log: opt
Description
Displays the option for printing of the SAP job log.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3138A Max job log size: size
Description
Displays the maximum job log size that USAP will attempt to retrieve from the SAP system.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3139A Print spool list: opt
Description
Displays the option for printing of the SAP job spool list.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3140A Max spool list size: size
Description
Displays the maximum spool list size that USAP will attempt to retrieve from the SAP system.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3141A Print syslog on error: opt
Description
Displays the option for printing of the SAP system log on error.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3142A Syslog pre-time: seconds
Description
Displays the length of time to subtract from the job release time when calculating the from time for the syslog report.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3143A Syslog post-time: seconds
Description
Displays the length of time to add to the job end time when calculating the to time for the syslog report.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3144A Wait for child jobs: opt
Description
Displays the wait_for_child_jobs option.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3145A Max child depth: opt
Description
Displays the maximum relationship depth that will be monitored by USAP.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3146A Print job log for child jobs: opt
Description
Displays the option for printing job logs for child jobs.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3147A Print spool lists for child jobs: opt
Description
Displays the option for printing spool lists for child jobs.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3148A Purge child jobs: opt
Description
Displays the option for purging child jobs.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3149A Job name: jobname
Description
Displays the name of the SAP job that will be aborted.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3150A Job ID: jobid
Description
Displays the ID of the SAP job that will be aborted.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3150E Keep alive interval lapsed in 'func', closing session.
Description
A keep alive message had not been sent and processed within the given time period and the transfer session was terminated.
func Name of the function where the failure occurred.
Severity
Error
System Action
The transfer session is terminated
User Action
Check the status of the network between all UDM instances. If the problem persists, contact Stonebranch Technical Support.
Component
Universal Data Mover
----
UNV3151A Job name: jobname
Description
Displays the name of the SAP job that will be purged.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3151E Failed to send keep alive message, closing session.
Description
The UDM Manager could not send a keep alive message as required.
Severity
Error
System Action
The transfer session is terminated
User Action
Check the status of the network between all UDM instances. If the problem persists, contact Stonebranch Technical Support.
Component
Universal Data Mover
----
UNV3152A Job ID: jobid
Description
Displays the ID of the SAP job that will be purged.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3152I Reconnection attempt number count of max in interval seconds.
Description
The manager has lost its connections to the server due to a network fault. The manager will attempt to reconnect to the broker in interval seconds. This is attempt number count of max attempts.
Severity
Informational
System Action
The session recovery process continues.
User Action
No action required.
Component
Universal Data Mover
----
UNV3153A Command mask: mask
Description
Displays the command name or a mask used to select SAP external commands that match the mask.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3153E Error connecting session session for recovery: func, errno, reason
Description
UCMD Manager was attempting to recover a lost network connection. An error occurred while accepting a new connection for the session session. The error occurred in function func. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, the manager will attempt to recover the connection with the server. The manager must initiate a new connection with the server. If the error was not due to a network fault, the server terminates.
User Action
Make sure a network connection is available between the manager and server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3154A Command operating system: opsys
Description
Displays the name of the operating system for which external commands are searched.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3154W Error cleaning up recovered session session: func, errno, reason
Description
An error occurred while closing a recovered session named session. A new session has been successfully created, and the old session was being cleaned up. func is the name of the function in which the error occurred. errno is error number. reason is an explanation of the error.
Severity
Warning
System Action
The program continues.
User Action
No action is required.
Component
Universal Data Mover
----
UNV3155A Client: opsys
Description
Displays the specific SAP client whose intercepted jobs will be reported.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3155E Error renegotiating sessname session options: func, errno, reason
Description
The manager is attempting to reestablish network connections after a network fault was detected. A connection was reestablished, but the manager and server were not able to renegotiate session options. Renegotiation was taking place for the sessname session. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation the error.
Severity
Error
System Action
If the error was due to a network fault, connection recovery starts over. If the error was not due to a network fault, the program terminates.
User Action
Make sure a network connection is available between the UDM and Universal Broker machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3156A Job name: jobname
Description
Displays the name of the job whose definition will be displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3156E Session name mismatch for recovered session session.
Description
UDM was attempting to recover a lost network connection. The manager was reestablishing the session session, but the server was expecting a different session.
Severity
Error
System Action
The session recovery process restarts.
User Action
The condition should correct itself. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3157A Job ID: id
Description
Displays the ID of the job whose definition will be displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3157E Error sending FORWARD_ID message to server: func, errno, reason
Description
UDM is attempting to reestablish network connections after a network fault was detected. A connection was reestablished, but the UDM components not agree on for which session it was for. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation the error.
Severity
Error
System Action
If the error was due to a network fault, connection recovery starts over. If the error was not due to a network fault, the program terminates.
User Action
Make sure a network connection is available between the UDM and Universal Broker machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3158A Job name: jobname
Description
Displays the name of the job whose log will be displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3158I Connecting to broker at ipaddr, port.
Description
Indicates that Universal Data Mover is trying to connect to Universal Broker at internet address ipaddr on port port.
Severity
Informational
System Action
The program continues.
User Action
None required.
Component
Universal Data Mover
----
UNV3159A Job ID: id
Description
Displays the ID of the job whose log will be displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3159E Error sending reconnect message in func(errno): reason
Description
Universal Data Mover was unable to send a request to Universal Broker to reconnect to the Universal Data Mover component. This error will also be displayed if the Broker rejected the message due to the state of the Universal Data Mover Server. The Broker will also reject the request if the Universal Data Mover Server component cannot be found. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the Broker rejected the reconnect request due to the state of the UDM Server, the manager may re-send the request, depending on the Server's state. If the Broker rejected the request for some other reason, the reconnect request will not be re-sent. If the request can't be re-sent, or some other error occurred, the program will terminate. If the request can be re-sent, the Manager will continue to do so until the number of reconnect attempts exceeds the retry count in the Manager's configuration.
User Action
Examine the error messages to identify the reason the request was not processed. Make sure the UDM Server component UDM is trying to reconnect to is still running, and is in a DISCONNECTED state. Make sure a network connection is still available between the client and server machines. Check the Universal Broker message log for any errors reported by Universal Broker. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3160A Short name: mask
Description
Displays the technical name of the output device.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3160E Error connecting session session for recovery: func, errno, reason
Description
UDM was attempting to recover a lost network connection. An error occurred while accepting a new connection for the session session. The error occurred in function func. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, the manager will attempt to recover the connection with the server. The manager must initiate a new connection with the server. If the error was not due to a network fault, the server terminates.
User Action
Make sure a network connection is available between UDM and the server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3161A Long name: mask
Description
Displays the long name of the output device.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3161E Error connecting to component via broker: func, errno, reason
Description
An attempt by Universal Data Mover to set up standard I/O redirection connections to UDM Server by sending a request to Universal Broker has failed. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure a network connection is available between the UDM and Universal Broker machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3162A Printer name: name
Description
Displays the name of a printer for which the print formats will be retrieved.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3162E A network error occurred in func: (errno) reason
Description
A network error was detected. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The network connections will be reestablished with the server and the data transfers will continued from their last successful point.
User Action
Make sure a network connection is still available between the client and server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3163A Layout name: mask
Description
Displays the layout name or a mask used to select printer layouts to be retrieved.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3163E Connection reestablishment successfully completed.
Description
A network error caused the UDM to reestablish network connections with the server. The connections have been successfully reestablished.
error.
Severity
Error
System Action
Universal Data Mover continues its processing from the point prior to the network error.
User Action
No action required.
Component
Universal Data Mover
----
UNV3164A Queue ID: qid
Description
Displays the queue identifier associated with the batch input session.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3164E Connection reestablishment has restarted.
Description
UDM Transfer Server has restarted the recovery of the connections.
Severity
Error
System Action
Connection reestablishment continues.
User Action
Make sure a network connection is available between all UDM machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3165A ABAP name: mask
Description
Displays the ABAP name or a mask used to select SAP ABAP reports.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3165E Error accepting session session for recovery: func, errno, reason
Description
UCMD Server was attempting to recover a lost network connection. An error occurred while accepting a new connection for the session session. The error occurred in function func. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, the server will attempt to recover the connection with UDM. The UDM must initiate a new connection with the server. If the error was not due to a network fault, the server terminates.
User Action
Make sure a network connection is available between the UDM and server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3166A Max hit count: mask
Description
Displays the maximum number of ABAP reports to be returned.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3166E Connection reestablishment failed.
Description
The server failed to reestablish network connections with UDM.
Severity
Error
System Action
The program terminates.
User Action
Review previously issued messages and messages issued by UDM to determine the cause of the failure.
Component
Universal Data Mover
----
UNV3167A Job name: jobname
Description
Displays the name of the job for which the spool list will be displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3167E Error renegotiating recovered session session options: func, errno, reason
Description
An error occurred while renegotiating session options for the recovered session named session. The error occurred in function func. The error code is specified by errno and its description by reason.
Severity
Error
System Action
The recovery action terminates. If the error is considered recoverable, the network connections will be reestablished, else the program terminates.
User Action
Should the problem persist or if the error is non-recoverable, contact Stonebranch Customer Support.
Component
Universal Data Mover
----
UNV3168A Job ID: id
Description
Displays the ID of the job for which the spool list will be displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3168E Session name mismatch for recovered session session.
Description
UCMD Server was attempting to recover a lost network connection. The server was reestablishing the session session, but the manager was reestablishing a different session.
Severity
Error
System Action
The session recovery process restarts. The server sends a negative acknowledgement back to the manager to indicate a recovery restart.
User Action
The condition should correct itself. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3169A Job step number: stepnumber
Description
Displays the step number of the SAP job for which the spool list will be returned.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3169E Error sending an acknowledgement in response to the FORWARD_ID message on session session:func, errno, reason
Description
UCMD Server was attempting to recover a lost network connection. An error occurred while reestablishing a new connection for the session session. The error occurred in function func. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, the server will attempt to recover the connection with UDM. UDM must initiate a new connection with the server. If the error was not due to a network fault, the server terminates.
User Action
Make sure a network connection is available between the UDM and the server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3170A Spool list translation table: translationtable
Description
Displays the spoollist translation table file to use for formatting returned spoollists.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3170E Error processing FORWARD_ID message in func: (errno) reason
Description
An error occurred while processing the FORWARD_ID message from UDM The FORWARD_ID message is part of the manager and server protocol used to reestablish lost TCP/IP connections. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, connection recovery starts over. If the error was not due to a network fault, the program terminates.
User Action
Make sure the network connection between the client and server machines is still available. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3171A Job name: jobname
Description
Displays the name of the job for which the status will be displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3171I Reconnection attempt count started.
Description
UDM is beginning to make its count attempt to reestablish its session.
Severity
Informational
System Action
Universal Data Mover attempts to establish a network connection with one. of its components in a transfer session.
User Action
No action required.
Component
Universal Data Mover
----
UNV3172A Job ID: id
Description
Displays the ID of the job for which the status will be displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3172E Session closed due to keep alive interval lapsing.
Description
A keep alive message had not been sent and processed within the given time period and the transfer session was terminated.
Severity
Error
System Action
The transfer session is terminated
User Action
Check the status of the network between all UDM instances. If the problem persists, contact Stonebranch Technical Support.
Component
Universal Data Mover
----
UNV3173A Scheduled exit code mapping: exitcode
Description
Displays the USAP exit code for the SAP job scheduled status.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3174A Ready exit code mapping: exitcode
Description
Displays the USAP exit code for the SAP job ready status.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3175A Released exit code mapping: exitcode
Description
Displays the USAP exit code for the SAP job released status.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3176A Active exit code mapping: exitcode
Description
Displays the USAP exit code for the SAP job active status.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3177A Finished exit code mapping: exitcode
Description
Displays the USAP exit code for the SAP job finished status.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3178A Terminated exit code mapping: exitcode
Description
Displays the USAP exit code for the SAP job terminated status.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3179A Variant name: name
Description
Displays the name of the pre-existing SAP variant whose contents will be displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3180A Variant language: language
Description
Displays the preferred language in which to return the variant description.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3181A ABAP name: name
Description
Displays the name of an ABAP program that the variant to be displayed is associated with.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3182A ABAP name: name
Description
Displays the name of an ABAP program whose associated variants will be returned.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3183A Variant selection: opt
Description
Displays the selection option for which type of variants will be returned. If opt is A, batch and dialog variants will be displayed. If opt is B, only batch mode variants will be displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3184A Job name mask: mask
Description
Displays the job name mask to use for job selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3185A Job id mask: mask
Description
Displays the job id mask to use for job selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3186A Job selection user ID: userid
Description
Displays the user id for which jobs will be selected.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3187A Scheduled: opt
Description
Displays the option for including scheduled jobs in the selection command.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3188A Ready: opt
Description
Displays the option for including ready jobs in the selection command.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3189A Released: opt
Description
Displays the option for including released jobs in the selection command.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3190A Running: opt
Description
Displays the option for including running jobs in the selection command.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3190I Session option, opt, set to val
Description
The session option, opt was set to a value of val.
Severity
Informational
System Action
The session option has been set.
User Action
No action required
Component
Universal Data Mover
----
UNV3191A Finished: opt
Description
Displays the option for including finished jobs in the selection command.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3191E Failed changing server job CCSID to ccsid. System issued message: msgid
Description
An error occurred in command CHGJOB CCSID(xxx).
Severity
Error
System Action
This error may be caused by either changing the UBROKER profile access authorities or by changing the CHGJOB command access authorities. Check the associated error message for additional diagnostic information.
User Action
Insure that the UBROKER profile has access to the CHGJOB command. Correct problems as indicated by the associated system message. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3192A Aborted: opt
Description
Displays the option for including aborted jobs in the selection command.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3192I Found null host/user values. udm_mgr_access rules may not be enforced.
Description
The udm_mgr_access rule was introduced in the 3.2.0 release. Pre-3.2.0 managers supply neither manager host names nor user IDs. Therefore, udm_mgr_access rules, other than those with host name 'ALL' and user ID '*', will not be enforced with pre 3.2.0 managers.
Severity
Informational
System Action
Processing continues unless a udm_mgr_access rule exists that denies access to all unrecognized UDM Managers (e.g., udm_mgr_access ALL,*,*,deny,auth).
User Action
Upgrade the UDM Manager to 3.2.0.0 or later.
Component
Universal Data Mover
----
UNV3193A No start date: opt
Description
Displays the option for including jobs with no start date in the selection command.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3194A With predecessor: opt
Description
Displays the option for including jobs with a predecessor in the selection command.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3195A From date: date
Description
Displays the earliest date to use for job selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3196A From time: time
Description
Displays the earliest time to use for job selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3197A To date: date
Description
Displays the latest date to use for job selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3198A To date: time
Description
Displays the latest time to use for job selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV3199A From date: date
Description
Displays the earliest date to use for job selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector