Overview

The Application Monitor Trigger allows you to trigger one or more tasks based on the status of:

A specific application resource.
One or more application resources, based on selection criteria you supply.

You can launch any number of tasks when the conditions in the trigger are satisfied.

When creating a trigger, if you specify Application Monitor Condition = All, and select all Application types, the trigger monitors all Application resource records you have defined. Any time any one of them goes to any of the statuses you specified in the Status(es) field, the trigger launches the task(s) specified in the Task(s) field. For example, you might use this trigger to send an email notification to technical support if any of the monitored applications goes into the Start Failure status.

Built-In Variables

Application Monitor Trigger built-in variables are provided to pass information about the Application being monitored into the task(s) being launched by the trigger. You can pass the information into the launched tasks by including the variables in a text field in the task definition.

Creating an Application Monitor Trigger

Step 1	From the Automation Center navigation pane, select Triggers > Application Monitor Triggers. The Application Monitor Triggers list displays. Below the list, Application Monitor Trigger Details for a new Application Monitor trigger displays. (You also can click the New button to display Application Monitor Trigger Details for a new Application Monitor trigger.)
Step 2	Enter/select Details for a new Application Monitor trigger, using the field descriptions below as a guide. Required fields display an asterisk ( * ) after the field name. Default values for fields, if available, display automatically. To display more of the Details fields on the screen, you can either: Use the scroll bar. Temporarily hide the list above the Details. Click the button above the list to display a pop-up version of the Details.
Step 3	Click a button. The trigger is added to the database, and all buttons and tabs in the Trigger Details are enabled.
Step 4	If appropriate, repeat these steps for any additional triggers you want to add.
Step 5	Enable the trigger(s) as desired.

Note

To open an existing record on the list, either:

Click a record in the list to display its record Details below the list. (To clear record Details below the list, click the New button that displays above and below the Details.)
Clicking the Details icon next to a record name in the list, or right-click a record in the list and then click Open in the Action menu that displays, to display a pop-up version of the record Details.
Right-click a record in the a list, or open a record and right-click in the record Details, and then click Open In Tab in the Action menu that displays, to display the record Details under a new tab on the record list page (see Record Details as Tabs).

Application Monitor Trigger Details

The following Application Monitor Trigger Details is for an existing Application Monitor trigger. See the field descriptions, below, for a description of the fields that display in the Application Monitor Trigger Details.

For information on how to access additional details - such as Metadata and complete database Details - for Application Monitor Triggers (or any type of record), see Records.

Application Monitor Trigger Details Field Descriptions

The following table describes the fields, buttons, and tabs that display in the Application Monitor Trigger Details.

Field Name	Description
General	This section contains general information about the trigger.
Name	Name used within the Controller to identify this trigger. It can contain a maximum of 255 alphanumerics. It is the responsibility of the user to develop a workable naming scheme for triggers.
Version	System-supplied; version number of the current record, which is incremented by the system every time a user updates a record. Click the Versions tab to view previous versions. For details, see Record Versioning.
Description	Description of this record. Maximum length is 255 characters.
Member of Business Services	User-defined; Allows you to select one or more Business Services that this record belongs to. (You also can Check All or Uncheck All Business Services for this record.) You can select up to 62 Business Services for any record type, and enter a maximum of 2048 characters for each Business Service. If the Business Service Visibility Restricted Universal Controller system property is set to true, depending on your assigned (or inherited) Permissions or Roles, Business Services available for selection may be restricted.
Calendar	Calendar that defines the business days, holidays, and other special days that determine the run dates for the task(s) specified in the trigger. Select a Calendar from the drop-down list of all existing Calendars. To display detailed information about a selected calendar, click the Details icon next to the Calendar field.
Time Zone	User-defined; allows you to specify the time zone that will be applied to the time(s) specified in the trigger. For example, if you specify 23:00 and a time zone of Canada/Central, the task will run at 11:00 p.m. Central Canada time.
Task(s)	Name of the task(s) being triggered when this trigger is satisfied. When selecting tasks from the Details, click on the lock icon to unlock the field and select tasks.
Simulate	Specifies if the instances generated by this trigger should execute under simulation mode, in which none of the tasks execute. Alternatively, simulation mode can be enabled from the Trigger Now… command (see Triggering with Variables and Triggering by Date and Time).
Purge By Retention Duration	Specification for whether triggered task instances can be purged by retention duration.
Exclude Backup	If Purge By Retention Duration is selected; Specification for whether qualifying task instances can be excluded from the backup when being purged by retention duration.
Retention Duration	If Purge By Retention Duration is selected; Minimum retention duration for the selected Retention Duration Unit before triggered task instances can qualify for purge. If Retention Duration Unit = Days, valid values are 1 to 366. If Retention Duration Unit = Hours, valid values are 1 to 24.
Retention Duration Unit	If Purge By Retention Duration is selected; Retention duration unit. Options: Hours Days
Execution User	Read-only; Execution user that has been selected (via the Assign Execution User action) to override the execution user of task instances being launched by the trigger.
Status	This section contains information about the current status of the trigger.
Status	System-defined; Specification for whether the trigger is Enabled or Disabled. The user enables and disables the trigger by clicking the Enable / Disable buttons. Only enabled triggers are processed by the Controller.
Next Scheduled Time	System-supplied; for time-based triggers. If Status = Enabled, the next date and time this trigger will be satisfied. See Displaying Trigger Forecast Information.
Enabled By	System-supplied. If Status = Enabled, ID of the user who most recently enabled this trigger.
Disabled By	System-supplied; If Status = Disabled, ID of the user who most recently disabled this trigger. (By default, all new triggers are disabled.)
Enabled Time	System-supplied. If Status = Enabled, Date and time that the trigger was enabled.
Disabled Time	System-supplied. If Status = Disabled, Date and time that the trigger was disabled.
Skip Details	This section contains detailed information about skipping the trigger.
Task Launch Skip Condition	User-defined; Controls when launching a target task for recurrence will be skipped. The Recurring Task Launch Skip Condition Default Universal Controller system property value is used as the default value for this field. Options: None Do not skip the target task launch. Active Skip the target task launch if there are any target task instances running. Active By Recurring Task Instance Skips the target task launch if there are any target task instances running for the same Recurring task.
Skip Restriction	User-defined; Specification for when this trigger should skip and not launch the task(s). Options: - - None - - No skip restrictions Before Trigger will skip if the current date and time is before the specified Skip Before Date and Skip Before Time values. After Trigger will skip if the current date and time is after the specified Skip After Date and Skip After Time values. Span Trigger will skip if the date and time qualifies based upon the specified Skip After Date, Skip After Time, Skip Before Date, and Skip After Date values. Note If Skip After Date and Skip After Time are prior to the Skip Before Date and Skip Before Time, the Span is a "between" period. In this case, if the triggered time is after the Skip After Date and Skip After Time as well as before the Skip Before Date and Skip Before Time, the Trigger will skip and not launch the configured Task(s). If the Skip Before Date and Skip Before Time are prior to the Skip After Date and Skip After Time, the Span is a "not between" period. In this case, if the triggered time is either after the Skip After Date and Skip After Time or before the Skip Before Date and Skip Before Time, then the trigger will skip and not launch the configured Task(s). On Trigger will skip on any of the dates specified in the Skip Date LIst. Default is - - None - -.
Skip Count	User-defined; Allows you to specify that the Controller should skip the next N times this task is triggered. Skip Count is not applicable when using the Trigger Now... command and will be ignored.
Skip Before Date	If Skip Restriction is Before or Span; Date before which the Trigger will skip.
Skip Before Time	If Skip Restriction is Before or Span; Time before which the Trigger will skip on the specified Skip Before Date.
Skip After Date	If Skip Restriction is After or Span; Date after which the Trigger will Skip.
Skip After Time	If Skip Restriction is After or Span; Time after which the Trigger will skip on the specified Skip After Date.
Skip Date List	If Skip Restriction is On; List of dates on which the trigger will skip.
Application Monitor Details	This section contains assorted detailed information about the trigger time.
Status(es)	System-supplied; application status being monitored for. One or more of the following: Inactive - The initial state of the Application. The Application is stopped and unmonitored. Start Failure - The Agent experienced a failure while attempting to execute the Start command. Starting - The Start command was executed and the Controller is waiting for Query command response. Active - The Query command response is reporting that the Application is Active. Impaired - The Query command response is reporting that the Application is experiencing a problem and is possibly down. Query Overdue - The Agent is late sending the Controller an updated Query command response.
Monitoring Type	Indicates whether you are monitoring one specific Application resource or want to provide selection parameters to monitor multiple Application resources. See Applications for information about setting up Application resources. Options: Specific Application Use the Application field to browse for and select the Application resource you want to monitor. General Applications Use the Application Monitor Condition and Application Type(s) fields to provide parameters for selecting which Application resources you want to monitor.
Application	If Application Monitor Triggers#Monitoring Type = Specific Application, name of a specific application resource to be monitored.
Application Monitor Condition	If Monitoring Type = General Application(s), allows you to specify selection parameters: All - Monitor all Application resources. Starts With - Monitor all Application resources whose name starts with the string you provide in the Condition Value field. Contains - Monitor all Application resources whose name contains the string you provide in the Condition Value field. Ends With - Monitor all Application resources whose name ends with the string you provide in the Condition Value field.
Condition Value	If Application Monitor Condition = Starts With, Contains, or Ends With; specifies the search string.
Application Type(s)	If Application Monitor Triggers#Monitoring Type = General Application(s), type(s) of applications to monitor. Options: Windows Service Linux/Unix Daemon z/OS Started Task
Restrictions	This section specifies any restrictions that apply to the trigger.
Special Restriction	Enable this field in order to specify additional parameters that tell the Controller how to handle exceptions, such as when the trigger is satisfied on a holiday or non-business day. You can specify simple and/or complex restrictions. For example, you can specify a Simple Restriction that disables the trigger if it is satisfied on a holiday identified in the calendar and/or a Complex Restriction that disables the trigger on the last business day of every month.
Action	If Special Restriction is enabled, allows you to select an action to take on a non-business day or holiday (see Situation field). Options: Do Not Trigger Next Day (run on the next day) Next Business Day (run on the next business day, as defined in the calendar) Previous Day (run on the previous day) Previous Business Day (run on the previous business day, as defined in the calendar)
Simple Restriction	If enabled, allows you to specify an action (see Action field) such as Do Not Trigger on a non-business day or holiday (see Situation field). For example, do not trigger on a non-business day.
Situation	If Simple Restriction is enabled, allows you to select the situation that causes the system to initiate the action specified in the Action field. Options: On Non Business Day On Holiday
Complex Restriction	If enabled, allows you to specify a set of parameters that determine one or more situations when this trigger should not be satisfied. Used in conjunction with the following fields: Restriction Mode, Restriction Adjective, Restriction Noun, Restriction Qualifier. For example, you may specify that you do not want to satisfy this trigger on the last business day of the year or the first day of each month.
Restriction Mode	If both Simple Restriction and Complex Restriction are enabled, specifies whether you want to use both restriction types (AND) or one or the other (OR). Options: And Or
Restriction Adjective	If Complex Restriction is enabled, the type of selection. Options: Every 1st 2nd 3rd 4th Last Nth Example: The last business day of the month.
Restriction Noun	If Complex Restriction is enabled, the day you want to select. Options: Sunday through Saturday Day Business Day Custom Day Example: The last business day of the month.
Restriction Qualifier	If Complex Restriction is enabled, the period you are selecting from. Options: Month Year Week January through December Custom period Example: The last quarter of the year.
Restriction Nth Amount	If Restriction Adjective is Nth, allows you to specify the value of N. If Restriction Qualifier is Week, Restriction Nth Amount must be <= 7.
Metadata	This section contains Metadata information about this record.
UUID	Universally Unique Identifier of this record.
Updated By	Name of the user that last updated this record.
Updated	Date and time that this record was last updated.
Created By	Name of the user that created this record.
Created	Date and time that this record was created.
Buttons	This section identifies the buttons displayed above and below the Trigger Details that let you perform various actions.
Save	Saves a new task record in the Controller database.
Save & New	Saves a new record in the Controller database and redisplays empty Details so that you can create another new record.
Save & View	Saves a new record in the Controller database and continues to display that record.
New	Displays empty (except for default values) Details for creating a new record.
Update	Saves updates to the record.
Enable	Activates this trigger and writes your User ID to the Enabled By field.
Disable	Deactivates this trigger.
Trigger Now...	Opens a Trigger Now... dialog to immediately trigger all tasks specified in this trigger. Optionally, you also can select to: Launch the task(s) specified in the trigger under simulation mode; you can only enable simulation mode from the Trigger Now... command, you cannot disable it when it is already enabled in the Trigger Details. Launch the task(s) specified in the trigger with one or more variables. Launch the task(s) specified in the trigger by a specified date and time. Launch the task(s) specified in the trigger but place them in Held status; they will not run until they are released. For Triggers that launch a single Workflow, specify if Workflow should run with only specific path(s) and/or specific vertices included. See Launching/Triggering a Workflow to Run on Specific Paths/Vertices. Note If you click Trigger Now... for an Enabled trigger that does not have an assigned Execution User, the trigger will launch its task(s) under the context of the Enabled By user. If you click Trigger Now... for a Disabled trigger that does not have an assigned Execution User, the trigger will launch its task(s) under the context of your user name and ID. If you click Trigger Now... for an Enabled or Disabled trigger that has an assigned Execution User, the trigger will launch its task(s) under the context of the assigned Execution User.
Copy	Creates a copy of this trigger, which you are prompted to rename.
Delete	Deletes the current record.
Refresh	Refreshes any dynamic data displayed in the Details.
Close	For pop-up view only; closes the pop-up view of this trigger.
Tabs	This section identifies the tabs across the top of the Trigger Details that provide access to additional information about the trigger.
Variables	Lists all user-defined variables associated with this record; that is, variables that have been defined for this specific record.
Instances	Lists all task instances that were triggered directly by this trigger.
Versions	Stores copies of all previous versions of the current record. See Record Versioning.