Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 19 Next »

Introduction

This page summarizes the changes introduced in each component maintenance release for Universal Agent 6.9.x.

For a list of all component changes included in the maintenance release for each platform, see:

Universal Agent Server

Release 7.1.0.0 - October 4, 2021

Change ID

Platforms

Component

Description

B-10691 

All 

UAGSRV 
UFTP 

Add explicit FTPS (FTPES) support to UFTP. 

Enables transfers using TLS/SSL over connection to standard FTP port 21, provided the FTP server supports it. 

To request TLS/SSL from a Remote File Transfer or Remote File Monitor task, select the FTP protocol and prepend ftpes:// to the FTP server host name or IP address (e.g., ftpes://somehost). If the FTP server has enabled TLS/SSL support, the connection will proceed using encrypted communication. If TLS/SSL support is NOT enabled, a plain text session/transfer is done. 

The UFTP ENABLE_SSL configuration option (default:no) is provided to always request a TLS/SSL session, eliminating the need to specify the ftpes:// prefix. 

The UFTP AUTHENTICATE_PEER configuration option (default: no) is provided to control FTP server certificate authentication. When set to “yes”, the UFTP CA_CERTIFICATES configuration option must specify a CA certificate that can authenticate the FTP server’s certificate. 

B-13282 

z/OS 

UAGSRV 

Add automatic failover support for Agents configured to execute in a sysplex environment.  

The following items were delivered for UA 7.1.0.0 to support this feature: 

  • B-13184: Allow a secondary agent to become a primary agent upon failover. 
  • B-13186: Allow a primary agent to become a secondary agent upon failover. 
  • B-13283: Provide the ability to configure a failover hierarchy, to determine the order in which secondary agents are chosen to become the new primary agent. 
  • B-13284: Provide the ability to stop a Universal Broker started task WITHOUT initiating a failover. 
  • B-13285: Provide the ability to stop a Universal Broker started task AND initiate a failover.  
  • B-13291: Allow a new primary agent to receive tracking data for jobs submitted or executed by the previous primary agent. 
  • B-13964: Ensure that licenses obtained from Universal Controller are handled properly within the updated primary and secondary agents whenever a failover occurs

Note

To ensure proper accounting for z/OS licenses, we recommend that all UAG Servers configured to run in a sysplex environment use the same value for the UAG Server’s NETNAME configuration option.

B-13768 

Unix 

UAGSRV 

Improve response and performance when several file monitor tasks that check file stability run concurrently.  

B-13819 

Unix 
Windows 

UEXT 

Provide the UAGSRV EXTENSION_PYTHON_LIST configuration option to extend the list of locations searched for Python instances that may be used by Universal Extension tasks.

Note

The HP-UX and z/OS agents do not provide the Universal Extension. 

B-13820 

Unix 
Windows 

UAGSRV 
UBROKER 
PKG 

Allow the following Universal Extension config options to be set at install time or via Broker startup: 

  • EXTENSION_ACCEPT_LIST 
  • EXTENSION_DEPLOY_ON_REGISTRATION 
  • EXTENSION_PYTHON_LIST 

Note

The HP-UX and z/OS agents do not provide the Universal Extension.


B-13831 

Unix 
Windows 

UAGSRV 
UBROKER
UEXT
 
PKG 


Provide the ability for Universal Extensions to detect and respond to Cancel commands issued from Universal Controller. 

This option provides the new UAG Server configuration option, EXTENSION_CANCEL_TIMEOUT.  

The ability to configure that value at install time and/or Universal Broker startup is also provided. 

Note

The HP-UX and z/OS agents do not provide the Universal Extension.


B-14049 

Unix
Windows 

UAGSRV 
UEXT 

Ensure that any instances of a password exposed by a Universal Extension task are scrubbed from the UAG Server cache files. 

D-07313 

Unix 
Windows 

UAGSRV 

Improve message handling and separation to prevent possible message loss. 

D-09666 

Windows 

UAGSRV 

Fixes a problem when the -uagstdio option is specified for additional UCMD Options and one or more of that option’s values contains double quotes that must be preserved. 

D-10171 

Windows 

UAGSRV 

Prevent the agent.log from being inherited by tasks spawned by the Agent. This fixes a problem that caused the agent.log’s scheduled rollover at midnight to fail if Agent tasks were running. 

D-10346 

z/OS 

UAGSRV 

Fixes a problem that prevented a zOS CHANGE File Monitor task from storing a renamed dataset’s new name in Universal Control variables. 

D-10415 

Windows 

UAGSRV 

Fixes an issue introduced in UA 7.0.0.0 that caused incorrect translation of UTF8 characters in Windows scripts. 

D-10432

Unix 
Windows 

UEXT

Fixes an issue that prevented collection of STDOUT when a Universal Extension task is cancelled.

Note

The HP-UX and z/OS agents do not provide the Universal Extension.

D-10470 

Linux PPC 

All 

Prevent a crash during OpenSSL random number generation seeding observed on RHEL8 on a PowerPC system. 

Universal Broker

Release 7.1.0.0 - October 4, 2021

Change ID

Platforms

Component

Description

B-13820 

Unix 
Windows 

UAGSRV 
UBROKER 
PKG 

Allow the following Universal Extension config options to be set at install time or via Broker startup: 

  • EXTENSION_ACCEPT_LIST 
  • EXTENSION_DEPLOY_ON_REGISTRATION 
  • EXTENSION_PYTHON_LIST 

Note

The HP-UX and z/OS agents do not provide the Universal Extension.


B-13831 

Unix 
Windows 

UAGSRV 
UBROKER
UEXT
 
PKG 


Provide the ability for Universal Extensions to detect and respond to Cancel commands issued from Universal Controller. 

This option provides the new UAG Server configuration option, EXTENSION_CANCEL_TIMEOUT.  

The ability to configure that value at install time and/or Universal Broker startup is also provided. 

Note

The HP-UX and z/OS agents do not provide the Universal Extension.


B-13885 

z/OS 

UBROKER 

Suppress ICH408I messages in the RACF log when running the Broker with a user without BPX.SUPERUSER access.  

This message is an expected response to a check of authority level, but repeated checks result in several instances of the ICH408I message appear in the log. 

D-10426 

z/OS 

UBROKER 

Fixes a problem that prevented UBROKER startup while loading the UNVACTRT SMF exit. 

D-10470 

Linux PPC 

All 

Prevent a crash during OpenSSL random number generation seeding observed on RHEL8 on a PowerPC system. 

Universal Command

Release 7.1.0.0 - October 4, 2021

Change ID

Platforms

Component

Description

D-10435 

Windows 

UCMD 
UCTL 
UDM 
UFTP 

Issue a configuration error when the DES-CBC-SHA cipher is specified from a Windows component. 

This cipher was deprecated in a previous release and since then, Agent server components would fail to negotiate a session with a manager component that only requested the DES-CBC-SHA cipher. However, the value itself should have been flagged during configuration processing and not presented to the server. 

D-10470 

Linux PPC 

All 

Prevent a crash during OpenSSL random number generation seeding observed on RHEL8 on a PowerPC system. 

D-10474 

z/OS 

UCMD 
UCTL 
UDM 
UEM 
UFTP 

 

Prevent a situation in which command line parameters provided via a SYSIN statement were ignored if they followed a password on the same line. 

For example, given the following: 

 //SYSIN DD * 
-userid uid -pwd password -level info 
/* 

 The -level option would be ignored unless moved to a separate line:
//SYSIN DD * 
-userid uid -pwd password 
-level info 
/* 

Universal Connector for SAP

Release 7.1.0.0 - October 4, 2021

Change ID

Platforms

Component

Description

B-12809 

All
(except HP-UX and Solaris Intel)
 

USAP 

Update USAP to support the RSPARAMSL_255 data type for variants. The following USAP operations may now take advantage of this change: 

  • SUBMIT variant using a variant definition file 
  • MODIFY variant using a variant definition file 
  • DISPLAY variant 
  • GENERATE variant definition 
  • SUBMIT job from job definition file with inline temporary variant. SAP LOW and HIGH data types to support up to 255 chars

These changes are supported for XBP 2.0 and XBP 3.0, but full 255-character support ultimately depends on the SAP function module implementation.  

Note

For the most consistent RSPARAMSL_255 support, Stonebranch recommends using SAP NW RFC library version 7.5.x and XBP 3.0 (controlled via the USAP XBP_MAX configuration option).

Universal Control

Release 7.1.0.0 - October 4, 2021

Change ID

Platforms

Component

Description

D-10435 

Windows 

UCMD 
UCTL 
UDM 
UFTP 

Issue a configuration error when the DES-CBC-SHA cipher is specified from a Windows component. 

This cipher was deprecated in a previous release and since then, Agent server components would fail to negotiate a session with a manager component that only requested the DES-CBC-SHA cipher. However, the value itself should have been flagged during configuration processing and not presented to the server. 

D-10470 

Linux PPC 

All 

Prevent a crash during OpenSSL random number generation seeding observed on RHEL8 on a PowerPC system. 

D-10474 

z/OS 

UCMD 
UCTL 
UDM 
UEM 
UFTP 

 

Prevent a situation in which command line parameters provided via a SYSIN statement were ignored if they followed a password on the same line. 

For example, given the following: 

 //SYSIN DD * 
-userid uid -pwd password -level info 
/* 

 The -level option would be ignored unless moved to a separate line:
//SYSIN DD * 
-userid uid -pwd password 
-level info 
/* 

Universal Data Mover

Release 7.1.0.0 - October 4, 2021

Change ID

Platforms

Component

Description

D-08997 

z/OS 

UDM 
UDMSRV 

Prevent a S0C4 when executing transfers of UTF16-encoded datasets. 

D-09852 

Unix 
z/OS 

UDM 
UDMSRV 

Ensure that the message that shows the result of the CD command displays correctly. 

This issue was most visible on zOS, but could occur on any Linux/Unix system whose default locale is not UTF8.  

D-10210 

All 

UDM 
UDMSRV 

Scrubs any password specified with the OPEN statement from trace file output. 

D-10256 

All 

UDM 

Fixes a crash that could occur if the UDM Manager message level was set to “trace” from the command line. 

D-10435 

Windows 

UCMD 
UCTL 
UDM 
UFTP 

Issue a configuration error when the DES-CBC-SHA cipher is specified from a Windows component. 

This cipher was deprecated in a previous release and since then, Agent server components would fail to negotiate a session with a manager component that only requested the DES-CBC-SHA cipher. However, the value itself should have been flagged during configuration processing and not presented to the server. 

D-10470 

Linux PPC 

All 

Prevent a crash during OpenSSL random number generation seeding observed on RHEL8 on a PowerPC system. 

D-10474 

z/OS 

UCMD 
UCTL 
UDM 
UEM 
UFTP 

 

Prevent a situation in which command line parameters provided via a SYSIN statement were ignored if they followed a password on the same line. 

For example, given the following: 

 //SYSIN DD * 
-userid uid -pwd password -level info 
/* 

 The -level option would be ignored unless moved to a separate line:
//SYSIN DD * 
-userid uid -pwd password 
-level info 
/* 

Universal Event Monitor

Release 7.1.0.0 - October 4, 2021

Change ID

Platforms

Component

Description

D-10470 

Linux PPC 

All 

Prevent a crash during OpenSSL random number generation seeding observed on RHEL8 on a PowerPC system. 

D-10474 

z/OS 

UCMD 
UCTL 
UDM 
UEM 
UFTP 

 

Prevent a situation in which command line parameters provided via a SYSIN statement were ignored if they followed a password on the same line. 

For example, given the following: 

 //SYSIN DD * 
-userid uid -pwd password -level info 
/* 

 The -level option would be ignored unless moved to a separate line:
//SYSIN DD * 
-userid uid -pwd password 
-level info 
/* 

Universal Extension

Release 7.1.0.0 - October 4, 2021

Change ID

Platforms

Component

Description

B-13819 

Unix 
Windows 

UEXT 

Provide the UAGSRV EXTENSION_PYTHON_LIST configuration option to extend the list of locations searched for Python instances that may be used by Universal Extension tasks.

Note

The HP-UX and z/OS agents do not provide the Universal Extension. 

B-13821

Unix
Windows
 

UEXT 

Update the values supported via the requires_python declaration of a Universal Extension implementation as follows: 

  • Support wildcards in the version specification (for example, “==2.7.*”). 
  • Support an exclusive range of versions via the > and < operators (for example, “> 2.6, < 4”).
  • Support an inclusive range of versions via the >= and <= operator (for example, “> 3.7.6”). 

Note

The HP-UX and z/OS agents do not provide the Universal Extension.


B-13822 

Windows 

UEXT 

Allow usermode installs to discover the Python distribution provided by a system mode-installed Agent. 

Note

The HP-UX and z/OS agents do not provide the Universal Extension.


B-13831 

Unix 
Windows 

UAGSRV 
UBROKER
UEXT
 
PKG 


Provide the ability for Universal Extensions to detect and respond to Cancel commands issued from Universal Controller. 

This option provides the new UAG Server configuration option, EXTENSION_CANCEL_TIMEOUT.  

The ability to configure that value at install time and/or Universal Broker startup is also provided. 

Note

The HP-UX and z/OS agents do not provide the Universal Extension.


B-13846 

Unix 
Windows 

UEXT 

Allow Universal Extension tasks to accept authentication tokens (e.g., used for Web or cloud-based service authentication) from a Universal Controller resolvable credential object. 

Note

The HP-UX and z/OS agents do not provide the Universal Extension.


B-13860 

Unix 
Windows 

UEXT 

Refactor the Universal Extension logging API so that it is no longer necessary to instantiate an ExtensionLogger object. Logging methods can now be accessed using the following import: 

from universal_extension import logger 

Logging methods can be invoked using calls such as either:

  • logger.info(‘msg’)
  • logger.error(‘msg’)

Note

The HP-UX and z/OS agents do not provide the Universal Extension.


B-13908 

Unix 
Windows 

UEXT 

Add the ability to execute Dynamic Commands within a Universal Extension task without launching a separate process (i.e., support “in-process” Dynamic Command execution). 

Note

The HP-UX and z/OS agents do not provide the Universal Extension.


B-13989 

Windows 

UEXT 

Provide a new utility to assist with Universal Extension development that provides a command line interface to Universal Extension task APIs offered by Universal Controller. 

Please see the Universal Extension development documentation for information on this new “uip” utility.

Note

The HP-UX and z/OS agents do not provide the Universal Extension.


B-14049 

Unix
Windows 

UAGSRV 
UEXT 

Ensure that any instances of a password exposed by a Universal Extension task are scrubbed from the UAG Server cache files. 

B-14255 

Windows 

UEXT 

Extend the uip utility delivered by B-13989 with an init command that can be used to initialize a working directory (e.g., a local Git repository) for Universal Extension development. 

Please see the Universal Extension development documentation for information on the new “uip” utility. 

Note

The HP-UX and z/OS agents do not provide the Universal Extension.

Universal FTP Client

Release 7.1.0.0 - October 4, 2021

Change ID

Platforms

Component

Description

B-10691 

All 

UAGSRV 
UFTP 

Add explicit FTPS (FTPES) support to UFTP. 

Enables transfers using TLS/SSL over connection to standard FTP port 21, provided the FTP server supports it. 

To request TLS/SSL from a Remote File Transfer or Remote File Monitor task, select the FTP protocol and prepend ftpes:// to the FTP server host name or IP address (e.g., ftpes://somehost). If the FTP server has enabled TLS/SSL support, the connection will proceed using encrypted communication. If TLS/SSL support is NOT enabled, a plain text session/transfer is done. 

The UFTP ENABLE_SSL configuration option (default:no) is provided to always request a TLS/SSL session, eliminating the need to specify the ftpes:// prefix. 

The UFTP AUTHENTICATE_PEER configuration option (default: no) is provided to control FTP server certificate authentication. When set to “yes”, the UFTP CA_CERTIFICATES configuration option must specify a CA certificate that can authenticate the FTP server’s certificate. 

B-13316 

Unix (except HP-UX) 
Windows 

UFTP 

Update SSH Key Exchange and Cipher support for SFTP transfers.  

Provides better compatibility with default OpenSSH configurations, by making the following changes to supported key exchange methods: 

Added: 

  • ecdh-sha2-nistp521 
  • ecdh-sha2-nistp384 
  • ecdh-sha2-nistp256 
  • curve25519-sha26

Removed: 

  • diffie-helman-group-exchange-sha 
  • diffie-helman-group14-sha1 
  • diffie-helman-group1-sha1

The diffie-helman-group-exchange-sha256 key exchange method was left unchanged. 

Support for the following ciphers was added: 

  • AES-256-CTR 
  • AES-192-CTR 
  • AES-128-CTR

Support for the following ciphers was left unchanged: 

  • AES-256-GCM 
  • AES-128-GCM 
  • AES-256-CBC 
  • AES-192-CBC 
  • AES-128-CBC 

D-10435 

Windows 

UCMD 
UCTL 
UDM 
UFTP 

Issue a configuration error when the DES-CBC-SHA cipher is specified from a Windows component. 

This cipher was deprecated in a previous release and since then, Agent server components would fail to negotiate a session with a manager component that only requested the DES-CBC-SHA cipher. However, the value itself should have been flagged during configuration processing and not presented to the server. 

D-10470 

Linux PPC 

All 

Prevent a crash during OpenSSL random number generation seeding observed on RHEL8 on a PowerPC system. 

D-10474 

z/OS 

UCMD 
UCTL 
UDM 
UEM 
UFTP 

 

Prevent a situation in which command line parameters provided via a SYSIN statement were ignored if they followed a password on the same line. 

For example, given the following: 

 //SYSIN DD * 
-userid uid -pwd password -level info 
/* 

 The -level option would be ignored unless moved to a separate line:
//SYSIN DD * 
-userid uid -pwd password 
-level info 
/* 

Universal Message Service (OMS)

Release 7.1.0.0 - October 4, 2021

Change ID

Platforms

Component

Description

B-13931 

Unix 
Windows 

OMS 

Add a service timeout implementation to the OMS Java Client to enable detection of connection issues without waiting for a TCP keepalive interval to elapse.

Note

The ability to configure this value is provided via the Universal Controller with B-13967. 

D-10371 

Unix 
Windows 

OMSSRV 

Prevents re-delivery of OMS messages following automatic recovery executed against a corrupted, truncated data file. 

Installation Changes

Release 7.1.0.0 - October 4, 2021

Change ID

Platforms

Component

Description

B-13820 

Unix 
Windows 

UAGSRV 
UBROKER 
PKG 

Allow the following Universal Extension config options to be set at install time or via Broker startup: 

  • EXTENSION_ACCEPT_LIST 
  • EXTENSION_DEPLOY_ON_REGISTRATION 
  • EXTENSION_PYTHON_LIST 

Note

The HP-UX and z/OS agents do not provide the Universal Extension.


B-13831 

Unix 
Windows 

UAGSRV 
UBROKER
UEXT
 
PKG 


Provide the ability for Universal Extensions to detect and respond to Cancel commands issued from Universal Controller. 

This option provides the new UAG Server configuration option, EXTENSION_CANCEL_TIMEOUT.  

The ability to configure that value at install time and/or Universal Broker startup is also provided. 

Note

The HP-UX and z/OS agents do not provide the Universal Extension.


D-10189 

z/OS 

PKG 

Fix a problem that prevented the installation of hlq.SUNVSAMP(UBRDBSPZ). 




  • No labels