All Maintenance Releases - Agent 6.3.x
Overview
This page identifies the changes made in all Universal Agent 6.3.x maintenance releases, including the initial release, for all supported platforms.
Each change identifies the platform(s) for which it was made.
Note
Install changes refer to changes to the programs, scripts, or supporting files used to install the package. There are no changes to the actual product components.
Release 6.3.0.6 - May 24, 2017
Change ID |
Platform |
Component |
Description |
---|---|---|---|
B-07352 |
z/OS |
UAGSRV |
Extend timeouts for acquiring exclusive access to the JSC dataset ENQUEUE. |
B-07353 |
z/OS |
UAGSRV |
Extend timeouts for JME creation when launching a z/OS task. |
D-07174 |
UNIX, |
UAGSRV |
Format the ls command used for an SFTP File Monitor to use the –l (minus “el”) option instead of -1 (minus one) to prevent errors on SFTP servers that do not recognize the -1 (minus one) option. |
D-07296 |
Windows |
UAGSRV |
Prevent a situation that may result in a "CSProcessCreate: The system cannot find the file specified" error when several Windows tasks that execute scripts with user credentials are launched at once. |
D-07559 |
All |
UDM, |
Fix a problem that could cause Universal Data Mover to prematurely stop reading a UTF16-encoded file. Note The problem was observed when trying to transfer a UTF-16BE file to a zOS dataset encoded with the IBM500 codepage. The cause of the problem was related to the size of the input file, and not to the UTF16 translation itself. |
D-07562 |
z/OS |
UAGUJV |
Prevent a conflict with a customer SMF exit that references the same JMR control block locations as UAGSRV SMF exits. |
D-07563 |
z/OS |
UAGUJI |
Fix a problem that prevents steps containing a DD statement which specifies DSN=NULLFILE to be selected for restart. |
D-07564 |
z/OS |
UAGUJI |
Make sure SKIPST parameters specified for z/OS tasks correctly skip steps that execute PROCs. |
D-07566 |
Windows |
Install |
Fix a problem that could cause a silent install to fail when RUNBROKERASUSER=0 is specified. The install incorrectly tried to authenticate the default credentials for a Broker service account whose password had been changed. The authentication failure was ignored for interactive installs, but caused silent installs for fail. |
Release 6.3.0.5 - April 28, 2017
Change ID |
Platform |
Component |
Description |
---|---|---|---|
B-03241 |
UNIX, |
UPPS |
Universal Connector for PeopleSoft that supports integration with the PeopleSoft Process Scheduler. |
Release 6.3.0.4 - February 14, 2017
Change ID |
Platform |
Component |
Description |
---|---|---|---|
D-07145 |
z/OS |
UDM |
UDM fails to create UTF16-encoded dataset on z/OS. |
D-07194 |
Windows |
UAGSRV |
File Monitors may go to Start Failure on AD Controller reboot/switchover. |
D-07201 |
UNIX |
UAGSRV |
Tasks with UACL fail with "CSProcessCreate failed: KrnProcessCreate" if the Agent is running as root. |
D-07295 |
All |
UDM |
Ensure that UDM does not write duplicate data to output file following successful NFT recovery. (See Universal Agent 6.3.0.4 Release Information for D-07295.) |
Release 6.3.0.3 - September 12, 2016
Change ID |
Platform |
Component |
Description |
---|---|---|---|
B-04648 |
All |
UDM |
Add milliseconds value to built-in variables for access, create, and modify file timestamps. |
B-06427 |
All |
UAGSRV |
Add support for new resolvable script Credential Functions: ${_credentialUser(‘<credential-name>’)} and ${_credentialPwd(‘<credential-name>’)}. |
B-06503 |
All |
USAP |
Add new configuration option, ENABLE_JOB_STATUS_CHECK, to enable/disable calls to BAPI_XBP_JOB_STATUS_CHECK. |
D-05719 |
z/OS |
UAGUJI |
Do not retain catalog information for new GDGs and other sequential datasets that did not get created in a job's initial run. |
D-06369 |
UNIX |
Install |
Fix upgrade behavior in HP-UX package when Universal Agent command line utilities are installed. |
D-06379 |
UNIX |
UDM |
Display correct version information for UDM Server. |
D-06468 |
UNIX |
UAGSRV |
Make sure all error information is reported for an EXISTS File Monitor task that fails because the path name specified in the task Details does not exist. |
D-06511 |
UNIX, |
UAGSRV |
File Monitor tasks that end with a Failed status do not always end with non-zero exit codes. |
D-06532 |
z/OS |
UAGSRV |
Make sure z/OS tasks whose jobs end with "$HASP106 JOB DELETED BY JES2 OR CANCELLED BY OPERATOR BEFORE EXECUTION" do not stay in Submitted status. |
D-06779 |
All |
UDM |
Make sure memory allocation errors that occur with large ACK_WINDOW values are reported prior to UDM failure. |
D-06781 |
All |
UDM |
Make sure memory allocation errors that occur when a large ACK_WINDO value is used when NFT is disabled are reported prior to UDM failure. |
D-06782 |
UNIX |
UAGSRV |
Allow SFTP server port to be overridden when password-based authentication is used with SFTP File Transfer tasks. |
D-06803 |
All |
UDM |
Correct problem trimming spaces from very long records. |
D-06837 |
UNIX (except AIX |
USAP |
Handle RFC timeouts during calls to RSPC_API_CHAIN_GET_STATUS. |
D-06846 |
Windows |
Install |
Mask passwords displayed by Stonebranch trace functions in install log. |
D-06883 |
z/OS |
UDM |
Fix incorrectly reported memory error when transferring datasets with RECFM=U and LRECL=0. |
D-06885 |
All |
UBROKER |
Protect initial handshake message protocol from malicious payloads. |
D-06888 |
All |
UAGSRV |
Clean up temporary script files created by SAP tasks. |
D-06893 |
All |
USAP |
Use Universal Connector GROUP configuration option instead of mshost value for RFC GROUP connection parameter. |
D-06909 |
z/OS |
UAGSRV |
Make sure jobs that end with S822 are reported correctly to Universal Controller. |
D-06920 |
z/OS |
UDM |
Do not fail conversion of an FBA dataset that starts with an ASA form feed character. |
D-06940 |
z/OS |
UAGSRV |
Prevent reserve deadlock when running multiple 6.3.0.x Agents. |
Release 6.3.0.2 - July 14, 2016
Change ID |
Platform |
Component |
Description |
---|---|---|---|
B-03155 |
z/OS |
UDM, |
Add support for ASA control character conversion/formatting. |
B-04195 |
UNIX |
OMS |
Increase the maximum number of allowable TCP/IP connections. |
B-05040 |
HP-UX Itanium, |
UBROKER, |
Add support for TLS 1.2 protocol. |
B-05825 |
HP-UX Itanium, |
UENCRYPT |
Create new files using defaults of AES256 encryption and an expanded 32-bit key. |
B-05826 |
HP-UX Itanium, |
UDM, |
Protect against interception of sensitive information during user authentication. |
B-05827 |
HP-UX Itanium, |
UBROKER, |
Turn off world readable flag for application configuration and log files. |
B-05829 |
HP-UX Itanium, |
UBROKER, |
Add support for TLS 1.2 ciphers, AES256-GCM-SHA384 and AES128-GCM-SHA256. |
B-05907 |
UNIX, |
OMSSRV |
Add support for TLS 1.2 protocol. |
B-05991 |
HP-UX Itanium, |
UBROKER, |
Add MIN_SSL_PROTOCOL configuration option to manage TLS application protocol support |
B-06010 |
HP-UX Itanium, |
USAP, |
Provide improved client fault tolerance for SAP process chains. |
B-06011 |
HP-UX Itanium, |
UDM, |
Add ability to authenticate Broker's certificate. |
B-06017 |
HP-UX Itanium, |
USAP, |
Provide ability to release intercepted child jobs. |
B-06253 |
All |
UDM |
Update UDM Manager DATA_COMPRESSION configuration option with new force parameter (that is, compress,force) to allow UDM Managers to override Server-configured compression. |
D-01721 |
All |
UDM, |
Fix conversion error that may occur when creating a session using UTF-8 or UTF-16 codepages. |
D-05592 |
z/OS |
UAGSRV |
When the initial run or restart of a job results in all executed steps being flushed (except for our step OPSSTP00 that executes UAGRERUN) the task will tail with the error “All steps flushed”, provided there are no other errors (for example, JCL errors) that caused the steps to flush. |
D-05880 |
All |
UDM, |
Set error return code when the length of a file’s records exceeds a z/OS datasets’s allocated record length. |
D-06350 |
HP-UX Itanium, |
UAGSRV |
Fix inconsistency between number of File Monitors shown in the Controller and that reported by ops_monitor. |
D-06367 |
HP-UX Itanium, |
UBROKER |
Prevent Broker crash when it receives a specially-crafted malformed header. |
D-06382 |
HP-UX Itanium, |
UAGCMD |
Generate unique names for trace files. |
D-06406 |
HP-UX Itanium, |
UAGSRV |
Allow concurrent File Monitor instances to search for files using regular expressions that contain a comma. |
D-06547 |
z/OS |
UAGSRV |
Ensure that JCL statements are padded with blanks instead of NULLs. |
D-06559 |
z/OS |
UAGSRV |
Fix error that prevents return of job output to original MSGCLASS when the UAG JES_SYSOUT_DISP configuration option value is RELEASE,*. |
D-06592 |
All |
UDM |
Add a message to display the value of the DATA_COMPRESSION configuration option following UDM Manager/Server session negotiation. |
D-06620 |
z/OS |
UBROKER, |
Issue error when the SSL_IMPLEMENTATION configuration option value is system and MIN_SSL_PROTOCOL configuration option value is TLS1_2, and/or an SSL cipher that requires TLS 1.2 protocol support is specified in a control or data session cipher list. |
D-06679 |
AIX, |
USAP |
Prevent XBP 3.0 Create Variant operation failure when SAP note 1144882 has been applied to system. |
D-06721 |
z/OS |
UAGUJI, |
Prevent possible abend when encountering SWA control blocks that reside above the bar. |
D-06751 |
z/OS |
UAGSRV |
Prevent possible S0C4 in UAGSRV function WjssLocalJmeDelete(). |
D-06774 |
All |
UBROKER |
Improve authentication of message parameters sent during a session negotiation’s handshake. |
D-06836 |
AIX, |
USAP |
Handle RFC timeouts during calls to RSPC_API_CHAIN_GET_STATUS. |
D-06838 |
AIX, |
USAP |
Handle FAILED exception from RSPC_API_CHAIN_GET_PROCESSES function. |
Release 6.3.0.1 - March 31, 2016
Change ID |
Platform |
Component |
Description |
---|---|---|---|
B-05040 |
AIX, Linux x64 |
UBROKER |
Add support for TLS 1.2 protocol. |
B-05825 |
AIX, Linux x64 |
UENCRYPT |
Create new files using defaults of AES256 encryption and an expanded 32-bit key. |
B-05826 |
AIX, Linux x64 |
UDM |
Protect against interception of sensitive information during user authentication. |
B-05827 |
AIX, Linux x64 |
UBROKER |
Turn off world-readable flag for application configuration and log files. |
B-05829 |
AIX, Linux x64 |
UBROKER |
Add support for TLS 1.2 ciphers, AES256-GCM-SHA384 and AES128-GCM-SHA256. |
B-05991 |
AIX, Linux x64 |
UBROKER |
Add MIN_SSL_PROTOCOL configuration option to manage TLS application protocol support. |
B-06010 |
AIX, Linux x64 |
USAP |
Provide improved client fault tolerance for SAP process chains. |
B-06011 |
AIX, Linux x64 |
UDM |
Add ability to authenticate Broker's certificate. |
B-06017 |
AIX, Linux x64 |
USAP |
Provide ability to release intercepted child jobs. |
D-06306 |
Windows |
UAGSRV |
DELETE File Monitors succeed when file's owner does not match the value of the task's File Owner field. |
D-06350 |
AIX, Linux x64 |
UAGSRV |
Fix inconsistency between number of File Monitors shown in the Controller and that reported by ops_monitor. |
D-06367 |
UBROKER |
AIX, Linux x64 |
Prevent Broker crash when it receives a specially-crafted malformed header. |
D-06382 |
AIX, Linux x64 |
UAGCMD |
Generate unique names for trace files. |
D-06406 |
AIX, Linux x64 |
UAGSRV |
Allow concurrent File Monitor instances to search for files using regular expressions that contain a comma. |
D-06437 |
z/OS |
UAGSRV |
Prevent possible S0C4 during variable substitution. |
D-06440 |
z/OS |
UAGSRV |
Tasks may stay in Submitted state after failing with a JCL error. |
D-06443 |
z/OS |
UAGSRV |
Prevent jobnames that start with IEFC from falsely reporting a JCL error. |
D-06456 |
z/OS |
UAGSRV |
Fix behavior that allows the Job Submission Checkpoint (JSC) dataset to contain duplicate keys, resulting in z/OS tasks that stay in Submitted status. |
D-06487 |
Windows |
UAGSRV |
Add ERROR_NETNAME_DELETED as a retry condition for File Monitor fault tolerance. |
Release 6.3.0.0 - January 18, 2016
Change ID |
Platform |
Component |
Description |
---|---|---|---|
B-03124 |
z/OS |
UAGSRV |
Add ability for batch jobs submitted via a z/OS task to execute on any image in a Sysplex environment. |
B-04736 |
ALL |
UAGSRV |
Allow File Monitor tasks to recover from and resume execution following temporary environmental interruptions and other transient errors. FM_FAULT_TOLERANT FM_FAULT_TOLERANT_TIMEOUT Previously delivered as B-04908 in 6.2.0.1. |
B-05138 |
UNIX, |
UEMSRV |
Remove license requirement. |
B-05147 |
UNIX |
Install |
Provide a native 64-bit Debian package. |
B-05428 |
All |
UAGCMDZ |
Update command line help for |
B-05467 |
All |
UDM, |
Provide new built-in variables to hold tokens found during wildcard (*, ?) pattern matching within a forfiles loop. |
B-05488 |
Windows |
Install |
Add updated Stonebranch logos to install dialogs. |
B-05635 |
All |
UDM, |
Add support for UTF-16LE and UTF-16BE codepage values in the open command. |
B-05646 |
z/OS |
Install |
Update install job UNVIN07 to allocate a JSC dataset and set the jsc_dataset option the UAGCFG00 configuration member during a new install. |
B-05662 |
z/OS |
UBROKER |
Add SYSPLEX_ROLE configuration option to set an Agent’s participation in Sysplex to none (default), primary, or secondary. |
B-05801 |
z/OS |
Install |
Add a new install job, UNVIN10, to allocate the JSC dataset during an upgrade from an earlier release. |
B-05805 |
z/OS |
UAGSRV |
Add ability to specify a Job Submission Checkpoint (JSC) dataset and Coupling Facility structure via the JSC_DATASET and CF_STRUCT_NAME configuration options, respectively. |
D-03981 |
All |
UDM, |
Retry and gracefully handle failed message queue memory allocations. |
D-05777 |
All |
UAGSRV |
Make sure ${ops_trigger_file_name_nopath} contains the correct value if the file name contains spaces. |
D-05830 |
All |
UDM, |
Fix “Invalid command” following the last iteration of a forfiles loop when a command is stored in a script variable. |
D-05855 |
z/OS |
UAGSRV |
Fix a problem that may prevent Create and Delete File Monitors from completing. |
D-05863 |
UNIX |
UAGSRV |
Populate appropriate built-in variables when a MISSING File Monitor which uses regular expressions fails. |
D-05878 |
z/OS |
UAGSRV |
Make sure that z/OS tasks with step condition codes require confirmation when JCL changes are made prior to rerun. |
D-05898 |
UNIX, |
UAGSRV |
Fix a file handle leak in FTP File Monitors. |
D-05901 |
Windows |
Install |
Fix rendering of install dialogs when executed on a display running at a very high resolution. |
D-05903 |
All |
UAGCMDZ |
Update command line help for ops-task-rerun CLI function. |
D-05943 |
UNIX |
UAGSRV |
Prevent possible deadlock when several File Monitor task instances start and finish simultaneously. |
D-05960 |
z/OS |
UAGRERUN |
Remove PARM=xxx debug statement when UAGRERUN is executed outside of UAGSRV. |
D-05963 |
All |
UAGCMDZ |
Remove condition that can cause ops-trigger-now to become unresponsive. |
D-05987 |
All |
UAGSRV |
Successfully return output when “last 1 line” is selected for retrieval. |
D-05996 |
UNIX |
UAGSRV |
Prevent display of “Error obtaining results” error message when no matching files are found. |
D-06005 |
z/OS |
UAGU83 |
Make sure that z/OS tasks with step condition codes require confirmation when JCL changes are made prior to rerun. |
D-06062 |
Windows |
UAGSRV |
Make sure CREATE File Monitor tasks successfully detect all matching files when several files are created at once. |
D-06075 |
UNIX |
UAGSRV |
Fix format of CPU identification string for Linux S390 systems. |
D-06094 |
UNIX |
UAGSRV |
Fix problem monitoring files larger than 2GB on AIX. |
D-06113 |
Windows |
Install |
Allow Universal Agent for SOA to recognize Universal Broker 3.2.0 and later installations in order to satisfy installation prerequisite. |
D-06126 |
All |
UDM, |
Make value of _existdir built-in variable accessible when the existdir command is called from a subroutine or an external script. |
D-06145 |
UNIX, |
UAGSRV |
Prevent all Application Monitor task instances from going into Query Overdue status if any one of the active monitors are stuck in a query. |
D-06163 |
All |
UAGCMDZ |
Prevent possible segmentation fault when certain resources become unavailable during processing of an ops-trigger-now command. |
D-06188 |
UNIX, |
USAP |
Prevent new instance of process chain from starting when the restart command includes an implicit (-R, Run) or explicit (-S, Start) start command. |
D-06201 |
UNIX, |
OMS Server |
Prevent buildup of unused files during clean-up if an older file contains an unconsumed message. |
D-06237 |
All |
UDM, |
Make sure wildcard expansion correctly populates built-in $(_file.wildcardn) variables when a complete path name is specified in a forfiles statement. |
D-06246 |
UNIX |
UAGSRV |
Fix possible memory leak for File Monitor task. |
D-06255 |
UNIX, |
UAGSRV |
Make regular expression behavior for File Monitor tasks similar to that found in Universal Data Mover. |
D-06262 |
Windows, |
UECTLR |
Universal Brokers cannot be put into managed mode if no license information is defined in the UEC configuration file (license requirements were dropped from UEC in 6.2.0.2). |
D-06278 |
z/OS |
UAGSRV |
Fix substitution of MSGCLASS and CLASS variables of more than 1 character. |
D-06290 |
Windows |
UAGSRV |
Correct handling of File Monitor tasks that use the ‘?’ wildcard in file name patterns. |
D-06322 |
All |
UDM, |
Prevent memory leak during forfiles processing. |
D-06328 |
UNIX, |
UEMSRV |
Events fail to become active following upgrade to 6.2.0.3 if no license info is available (license requirements were dropped from UEM in 6.2.0.2). |
Universal Agent for SOA 6.3.x for UNIX Packages
Release |
Release Date |
Universal Command Agent for SOA |
---|---|---|
January 18, 2016 |
6.3.0.0 |
(There were no changes to this release.)
Universal Agent for SOA 6.3.x for Windows Packages
Release |
Release Date |
Universal Command Agent for SOA |
---|---|---|
January 18, 2016 |
6.3.0.0 |
Universal Enterprise Controller 6.3.0 for Windows Packages
Release |
Release Date |
Universal Enterprise Controller |
---|---|---|
January 18, 2016 |
6.3.0.0 |
UEC 6.3.0.0 - January 18, 2016
Change ID |
Platform |
Component |
Description |
---|---|---|---|
B-05138 |
Windows, |
UECTLR |
Remove license requirement. |
D-06262 |
Windows, |
UECTLR |
Universal Brokers cannot be put into managed mode if no license information is defined in the UEC configuration file (license requirements were dropped from UEC in 6.2.0.2). |
Universal Enterprise Controller Client Applications 6.3.0 for Windows Packages
Release |
Release Date |
I-Activity Monitor |
I-Administrator |
I-Management Console |
---|---|---|---|---|
January 18, 2016 |
6.3.0.0 |
6.3.0.0 |
6.3.0.0 |
UEC Client Applications 6.3.0.0 - January 18, 2016
(There have been no changes to this release.)
Agent for SOA 6.3.0.0 - January 18, 2016
Change ID |
Platform |
Component |
Description |
---|---|---|---|
D-06113 |
Windows |
Install |
Allow Universal Agent for SOA to recognize Universal Broker 3.2.0 and later installations in order to satisfy installation prerequisite. |
IBM i
Currently, IBM i runs Workload Automation 5.1.0. This page provides information for that version.
Overview
This section identifies the package contents for the single Workload Automation 5.1.0 for IBM i release, and the maintenance level of every component in that package.
Workload Automation 5.1.0 for IBM i Package
Release |
Release Date |
Universal |
Universal |
Universal |
Universal |
Universal |
Universal |
Universal |
Universal |
Universal |
Universal |
Universal |
Universal |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5.1.0.0 |
January 27, 2012 |
5.1.0.0 |
|
|
5.1.0.0 |
5.1.0.0 |
|
|
|
5.1.0.0 |
5.1.0.0 |
5.1.0.0 |
|
HP NonStop
Currently, HP NonStop runs Universal Command 2.1.1. These pages provide information for that version.
Overview
This section identifies the package contents for all Universal Command 2.1.1 for HP NonStop maintenance releases and the maintenance level of every component in each package.
For each release, changes made to individual components only for HP NonStop are identified. Maintenance level changes to a component for non-HP NonStop platforms are not shown.
Universal Command 2.1.1 for HP NonStop Packages
Release |
Release Date |
Universal |
Universal |
Universal |
Universal |
Universal |
Universal |
Universal |
Universal |
---|---|---|---|---|---|---|---|---|---|
July 10, 2013 |
2.1.1.3 |
2.1.1.3 |
2.1.1.4 |
2.1.1.3 |
2.1.1.3 |
2.1.1.3 |
2.1.1.3 |
2.1.1.3 |
|
September 3, 2008 |
2.1.1.3 |
2.1.1.3 |
2.1.1.3 |
2.1.1.3 |
2.1.1.3 |
2.1.1.3 |
2.1.1.3 |
2.1.1.3 |
|
January 23, 2004 |
2.1.1.2 |
2.1.1.2 |
2.1.1.2 |
2.1.1.2 |
2.1.1.2 |
2.1.1.2 |
2.1.1.2 |
2.1.1.2 |
|
September 30, 2003 |
2.1.1.1 |
2.1.1.1 |
2.1.1.1 |
2.1.1.1 |
2.1.1.1 |
2.1.1.1 |
2.1.1.1 |
2.1.1.1 |
|
2.1.1.0 |
July 7, 2003 |
2.1.1.0 |
2.1.1.0 |
2.1.1.0 |
2.1.1.0 |
2.1.1.0 |
2.1.1.0 |
2.1.1.0 |
2.1.1.0 |
2.1.1.4 - July 10, 2013
Change ID |
Platform |
Component |
Description |
---|---|---|---|
D-03227 |
Integrity |
UCMSRV |
IPC files are not being cleaned up on the HP Nonstop platform. |
D-03228 |
Integrity |
UCMSRV |
A setuid failure happens whenever jobs are executed on the HP Nonstop platform. |
2.1.1.3 - September 3, 2008
Change ID |
Platform |
Component |
Description |
---|---|---|---|
UCM-992 |
Itanium |
UCMD |
HP NonStop Itanium support. |
2.1.1.2 - January 23, 2004
Change ID |
Platform |
Component |
Description |
---|---|---|---|
CR01135 |
HP NonStop |
UCMSRV |
Certain errors, such as #OBEY file not found, were not properly detected and resulted in exit code 0. |
CR01137 |
HP NonStop |
UCOPY |
UCOPY always created files with file code 180. UCOPY is now capable of creating Guardian EDIT files as well as C files (180). |
DF01060 |
HP NonStop |
UBROKER |
The ubrokerd script with the status argument only worked if run with the same user identifier as the broker is executing. Any user can now successfully execute the status command. |
DF01325 |
HP NonStop |
UBROKER |
Broker log file permission was set so that only the user identifier with which the broker is running could read it. This identifier is normally super.super. File permissions are now set so everyone can read them. |
DF01326 |
HP NonStop |
UCMSRV |
Server trace file permission was set so that only the user identifier with which the broker is running could read them. This identifier is normally super.super. File permissions are now set so everyone can read them. |
DF01335 |
HP NonStop |
UBROKER |
The broker unv.log file does not roll over to the next generation. |
2.1.1.1 - September 30, 2003
Change ID |
Platform |
Component |
Description |
---|---|---|---|
CR01023 |
HP NonStop |
UCMSRV |
Added the server options CPU and PRIORITY. The CPU option permits a UCMD manager to specify the processor on which the user job executes. The PRIORITY option permits a UCMD manager to specify the priority with which the user job executes. The UCMD manager can specify both options with the manager's SERVER option (-S or –server). |
DF01000 |
HP NonStop |
UCMSRV |
Standard input redirection was enabled. |
DF01027 |
HP NonStop |
UBROKER |
The time values printed in the UCMD messages were not correct. The C run-time library's TZ environment variable controls time values be specifying the time zone for the program. The TZ environment variable has been added to the UBROKERD startup script. |