Overview

Universal Controller supports the following RESTful-based web services for Workflow Task and Dependency operations, which are listed alphabetically on this page.

Formatting specifications for each web service, including details about parameter requirements, are provided.

Add a Dependency to a Workflow

	Description
URI	http://host_name/uc/resources/workflow/edges
HTTP Method	POST
Description	Adds a dependency to a workflow, with the dependency represented by a `workflowEdge`. (See Example Request, below.)
URI Parameters	See Add a Dependency to a Workflow: URI Parameters, below.
Example URI	http://localhost:8080/uc/resources/workflow/edges?workflowname=workflow1
Consumes Content-Type	application/xml, application/json
Produces Content-Type	n/a
Example Request	See Add a Dependency to a Workflow: Example Request, below.
Add a Dependency to a Workflow Properties	See Add a Dependency to a Workflow: Properties, below.
Example Response	Status 200 /OK Successfully added a dependency between <sourceId> and <targetId>. Status 400 /Bad Request Workflow <workflowName> doesn`t exist.

Add a Dependency to a Workflow: URI Parameters

Name	Description	Specifications	Required	Mutually Exclusive With
`workflowid`	ID used within the Controller to identify the workflow.	String; URI parameter.	Y (unless `workflowname` is specified)	`workflowname`
`workflowname`	Name used within the Controller to identify the workflow.	String; URI parameter.	Y (unless `workflowid` is specified)	`workflowid`

Add a Dependency to a Workflow: Example Request

XML

JSON

XML

<workflowEdge>
      <condition>Success</condition>
      <points>
            <point x="280" y="300" />
      </points>
      <sourceId>2</sourceId>
      <straightEdge>false</straightEdge>
      <targetId>3</targetId>
</workflowEdge>

JSON

{
  "condition": {
    "value": "Success"
  },
  "points": [ {
     "x": "280",
     "y": "300"
  } ],
  "sourceId": {
    "value": "2"
  },
  "straightEdge": false,
  "targetId": {
    "value": "3"
  }
}

Add a Dependency to a Workflow: Request Properties

Property	UI Field Name	Description	Specifications	Required
`condition`	n/a	Dependency condition between the source and target tasks of this dependency (connector).	Valid values: Success Failure Success/Failure Exit Code; Format: Numeric. Use commas to list a series of exit codes; use hyphens to specify a range. Example: 1,5, 22-30 Step Condition; Format: step:procedure:program:condition codes. Example: :::JCLERR Variable Default is Success. For example: `<condition>Success</condition>` `<condition>Failure</condition>` `<condition>Success/Failure</condition>` `<condition>1,5,22-30</condition>` `<condition>:::JCLERR</condition>` `<condition>S1:PROC1:PGM1:U016</condition>` `<condition type="Exit Code">1,5,22-30</condition>` `<condition type="Step Condition">:::JCLERR</condition>` `<condition type="Step Condition">:::S0C4</condition>` `<condition type="Step Condition">S1:PROC1:PGM1:U016</condition>` `<variableCondition>` `<firstValue>${_varToLowerCase('variableName')}</firstValue>` `<operator>=</operator>` `<secondValue>${var2}</secondValue>` `</variableCondition>` Step Condition is valid for z/OS tasks only. Success/Failure and Failure are not valid for Workflow, Timer, and Manual tasks. Note The type attribute (type=) is optional for Exit Code and Step Condition. Based on the format of the condition, in most cases it is easily determined if the condition is Exit Code and Step Condition. If the condition cannot be determined, the type attribute can be checked.	N
`points`	n/a	If `straightEdge` is false; x and y coordinates of the Edge angles.	For example: <points> <point x="280" y="300" /> </points>	N
`sourceId`	n/a	Vertex ID of the source task.		Y
`straightEdge`	n/a	Specification for whether the edge is straight or bent.	Boolean; Valid values: true/false. Default is true.	N
`targetId`	n/a	Vertex ID of the target task.		Y

Add a Task to a Workflow

	Description
URI	http://host_name/uc/resources/workflow/vertices
HTTP Method	POST
Description	Adds a task to a workflow, with the task represented by a `workflowVertex`. (See Example Request, below.)
URI Parameters	See Add a Task to a Workflow: URI Parameters, below.
Example URI	http://localhost:8080/uc/resources/workflow/vertices?workflowname=workflow1
Consumes Content-Type	application/xml, application/json
Produces Content-Type	application/xml, application/json
Example Request	See Add a Task to a Workflow: Example Request, below.
Example Response	See Add a Task to a Workflow: Example Response (Status 200), below.
Add a Task to a Workflow Properties	See Add a Task to a Workflow: Request/Response Properties, below.
Example Response	Status 200 /OK Successfully added vertex with vertexId <vertextId>. Status 400 /Bad Request Workflow <workflowName> doesn`t exist.

Add a Task to a Workflow: URI Parameters

Name	Description	Specifications	Required	Mutually Exclusive With
`workflowid`	ID used within the Controller to identify the workflow.	String; URI parameter.	Y (unless `workflowname` is specified)	`workflowname`
`workflowname`	Name used within the Controller to identify the workflow.	String; URI parameter.	Y (unless `workflowid` is specified)	`workflowid`

Add a Task to a Workflow: Example Request

XML

JSON

XML

<workflowVertex>
      <alias>S30</alias>
      <conditionExpression />
      <task>Sleep 30</task>
      <vertexX>360</vertexX>
      <vertexY>60</vertexY>
</workflowVertex>

JSON

{
  "alias": "S30",
  "conditionExpression": null,
  "task": {
    "value": "Sleep 30"
  }, 
  "vertexX": "360",
  "vertexY": "60"
}

Add a Task to a Workflow: Example Response (Status 200)

XML

JSON

XML

<workflowVertex>
      <alias>S30</alias>
      <conditionExpression />
      <task>Sleep 30</task>
      <vertexId>9</vertexId>
      <vertexX>360</vertexX>
      <vertexY>60</vertexY>
</workflowVertex>

JSON

{
  "alias": "S30",
  "conditionExpression": null,
  "task": {
    "value": "Sleep 30"
  }, 
  "vertexId": "9,
  "vertexX": "360",
  "vertexY": "60"
}

Add a Task to a Workflow: Request/Response Properties

Property	UI Field Name	Description	Specification	Required
`alias`	n/a	Alias used for the task added to the workflow; specifically, the value of ops_task_workflow_vertex.name.		N
`conditionExpression`	n/a	Boolean condition expression to specify the dependency criteria.	XML: <conditionExpression> <condition> <vertexId>7</vertexId> </condition> <condition> <vertexId>10</vertexId> </condition> <compoundCondition> <condition> <vertexId>9</vertexId> </condition> <condition> <vertexId>7</vertexId> </condition> <logicalOperator>And</logicalOperator> </compoundCondition> <logicalOperator>Or</logicalOperator> </conditionExpression> JSON: "conditionExpression": { "conditions": [ { "type": "condition", "vertexId": "7" }, { "type": "condition", "vertexId": "10" }, { "type": "compoundCondition", "conditions": [ { "type": "condition", "vertexId": "9" }, { "type": "condition", "vertexId": "7" } ], "logicalOperator": "And" } ], "logicalOperator": "Or" }	N
`task`	Task Name	Name of the task added to the workflow.		Y
`vertexId`	n/a	Vertex ID of the task added to the workflow. Each task within a Workflow has a unique Vertex ID to distinguish it from other tasks of the same name, if any.		Y
`vertexX`	n/a	x-coordinate of the task added to the workflow.	Default is 0.	N
`vertexY`	n/a	y-coordinate of the task added to the workflow.	Default is 0.	N

List Dependencies in a Workflow

	Description
URI	http://host_name/uc/resources/workflow/edges
HTTP Method	GET
Description	Returns the list of dependencies for all tasks in a workflow, with each dependency represented by a `workflowEdge` (see Example Response, below).
URI Parameters	See List Dependencies in a Workflow: URI Parameters, below.
Example URI	http://localhost:8080/uc/resources/workflow/edges?workflowname=workflow1
Authentication	HTTP Basic
Consumes Content-Type	n/a
Produces Content-Type	application/xml, application/json
Example Response	See List Dependencies in a Workflow: Example Response, below.
Response Properties	See List Dependencies in a Workflow: Properties, below.

List Dependencies in a Workflow: URI Parameters

Name	Description	Specifications	Required	Mutually Exclusive With
`sourceid`	Vertex ID of the source task.	String; URI parameter.	N
`targetid`	Vertex ID of the target task.	String; URI parameter.	N
`workflowid`	ID used within the Controller to identify the workflow.	String; URI parameter.	Y (unless `workflowname` is specified)	`workflowname`
`workflowname`	Name used within the Controller to identify the workflow.	String; URI parameter.	Y (unless `workflowid` is specified)	`workflowid`

List Dependencies in a Workflow: Example Response

XML

JSON

XML

<workflowEdges>
        <workflowEdge>
                 <condition>Success</condition>
                 <sourceId taskName="Sleep 30" taskAlias="test">2</sourceId>
                 <straightEdge>true</straightEdge>
                 <targetId taskName="Sleep 60">3</targetId>
        </workflowEdge>
        <workflowEdge>
                 <condition>Success</condition>
                 <sourceId taskName="Sleep 60">3</sourceId>
                 <straightEdge>true</straightEdge>
                 <targetId taskName="Sleep 60">6</targetId>
        </workflowEdge>
</workflowEdges>

JSON

[
  {
  "condition": {
    "value": "Success"
  },
  "sourceId": {
    "taskAlias": "test",
    "taskName": "Sleep 30",
    "value": "2"
  },
  "straightEdge": true,
  "targetId": {
    "taskName": "Sleep 60",
    "value": "3"
  }
},
  {
  "condition": {
    "value": "Success"
  },
  "sourceId": {
    "taskName": "Sleep 60",
    "value": "3"
  },
  "straightEdge": true,
  "targetId": {
    "taskName": "Sleep 60",
    "value": "6"
  }
} 
]

List Dependencies in a Workflow: Properties

Property	UI Field Name	Description
`condition`	n/a	Dependency condition between the source and target tasks of this edge (connector).
`sourceId`	n/a	Vertex ID of the source task.
`straightEdge`	n/a	Specification for whether the edge is straight or bent.
`targetId`	n/a	Vertex ID of the target task.

List Tasks in a Workflow

Attribute sysId identifies the sysid of the specified task.

	Description
URI	http://host_name/uc/resources/workflow/vertices
HTTP Method	GET
Description	Returns the list of tasks in a workflow, with each task represented by a `workflowVertex` (see Example Response, below).
URI Parameters	See List Tasks in a Workflow: URI Parameters, below.
Example URI	http://localhost:8080/uc/resources/workflow/vertices?workflowname=workflow http://localhost:8080/uc/resources/workflow/vertices?workflowname=workflow&taskname=test
Authentication	HTTP Basic
Consumes Content-Type	n/a
Produces Content-Type	application/xml, application/json
Example Response	See List Tasks in a Workflow: Example Response, below.
Response Properties	See List Tasks in a Workflow: Properties, below.

List Tasks in a Workflow: URI Parameters

Parameter	Description	Specifications	Required	Mutually Exclusive With
`taskalias`	Alias used for the task within the Workflow; specifically, the value of ops_task_workflow_vertex.name.	String; URI parameter.	Y (unless `taskid`, `taskname` or `vertexid`, is specified	`taskid`, `taskname`, `vertexid`
`taskid`	ID used within the Controller to identify this task.	String; URI parameter.	Y (unless `taskalias`, `taskname` or `vertexid`, is specified	`taskalias`, `taskname`, `vertexid`
`taskname`	Name used within the Controller to identify this task.	String; URI parameter.	Y (unless `taskalias`, `taskid` or `vertexid`, is specified	`taskalias`, `taskid`, `vertexid`
`vertexid`	Vertex ID of the task in the workflow to be listed. Each task within a Workflow has a unique Vertex ID to distinguish it from other tasks, if any, of the same name.	String; URI parameter.	Y (unless `taskalias`, `taskid` or `taskname`, is specified	`taskalias`, `taskid`, `taskname`
`workflowid`	ID used within the Controller to identify a workflow.		Y (unless `workflowname` is specified	`workflowname`
`workflowname`	Name of a workflow.		Y (unless `workflowid` is specified	`workflowid`

List Tasks in a Workflow: Example Response

XML

JSON

XML

<workflowVertices>
    <workflowVertex>
        <alias>Task 1</alias>
        <conditionExpression />
        <task sysId="1010f538c0a801c900e0fe0af94d9be5">task1</task>
        <vertexId>5</vertexId>
        <vertexX>253</vertexX>
        <vertexY>296</vertexY>
    </workflowVertex>
    <workflowVertex>
        <alias>Task 2</alias>
        <conditionExpression />
        <task sysId="f81d30ccc0a801c9008ea20e4f5f61d6">task2</task>
        <vertexId>6</vertexId>
        <vertexX>252.5</vertexX>
        <vertexY>429</vertexY>
    </workflowVertex>
</workflowVertices>

JSON

[
  {
    "alias": "Task 1",
    "conditionExpression": null,
    "task": {
      "sysId": "1010f538c0a801c900e0fe0af94d9be5",
      "value": "task1"
    },
    "vertexId": "5",
    "vertexX": "253",
    "vertexY": "296"
    },
    {
    "alias": "Task 2",
    "conditionExpression": null,
    "task": {
      "sysId": "f81d30ccc0a801c9008ea20e4f5f61d6",
      "value": "task2"
    },
    "vertexId": "6",
    "vertexX": "252.5",
    "vertexY": "429"
  }
]

List Tasks in a Workflow: Response Properties

Property	UI Field Name	Description
`alias`	n/a	Alias used for the task; specifically, the value of ops_task_workflow_vertex.name.
`conditionExpression`	n/a	Boolean condition expression to specify the dependency criteria.
`task`	Task Name	Name of the task added.
`vertexId`	n/a	Vertex ID of the task. Each task within a Workflow has a unique Vertex ID to distinguish it from other tasks of the same name, if any.
`vertexX`	n/a	x-coordinate of the task.
`vertexY`	n/a	y-coordinate of the task.

Modify a Dependency in a Workflow

	Description
URI	http://host_name/uc/resources/workflow/edges
HTTP Method	PUT
Description	Modifies a dependency in a workflow, with the dependency represented by a `workflowEdge`.
URI Parameters	See Modify a Dependency in a Workflow: URI Parameters.
Example URI	http://localhost:8080/uc/resources/workflow/edges?workflowname=workflow1
Consumes Content-Type	application/xml, application/json
Produces Content-Type	n/a
Example Request	See Modify a Dependency in a Workflow: Example Request, below.
Modify a Dependency in a Workflow Properties	See Add a Dependency to a Workflow: Properties.
Example Response	Status 200 /OK Successfully updated dependency between <sourceId> and <targetId>. Status 400 /Bad Request Workflow <workflowName> doesn`t exist.

Modify a Dependency in a Workflow: URI Parameters

Name	Description	Specifications	Required	Mutually Exclusive With
`workflowid`	ID used within the Controller to identify the workflow.	String; URI parameter.	Y (unless `workflowname` is specified)	`workflowname`
`workflowname`	Name used within the Controller to identify the workflow.	String; URI parameter.	Y (unless `workflowid` is specified)	`workflowid`

Modify a Dependency in a Workflow: Example Request

XML

JSON

XML

<workflowEdge>
      <condition>Success</condition>
      <points>
            <point x="280" y="300" />
      </points>
      <sourceId>2</sourceId>
      <straightEdge>false</straightEdge>
      <targetId>3</targetId>
</workflowEdge>

JSON

{
  "condition": {
     "value": "Success"
  },
  "points": [ {
     "x": "280",
     "y": "300"
  } ],
  "sourceId": {
    "value": "2"
  },
  "straightEdge": false,
  "targetId": {
    "value": "3"
  }
}

Modify a Task in a Workflow

	Description
URI	http://host_name/uc/resources/workflow/vertices
HTTP Method	PUT
Description	Modifies a task in a workflow, with the task represented by a `workflowVertex`.
URI Parameters	See Modify a Task in a Workflow: URI Parameters, below.
Example URI	http://localhost:8080/uc/resources/workflow/vertices?workflowname=workflow1
Consumes Content-Type	application/xml, application/json
Produces Content-Type	n/a
Example Request	See Modify a Task in a Workflow: Example Request, below.
Modify a Task in a Workflow Properties	See Add a Task to a Workflow: Properties.

Modify a Task in a Workflow: URI Parameters

Name	Description	Specifications	Required	Mutually Exclusive With
`workflowid`	ID used within the Controller to identify the workflow.	String; URI parameter.	Y (unless `workflowname` is specified)	`workflowname`
`workflowname`	Name used within the Controller to identify the workflow.	String; URI parameter.	Y (unless `workflowid` is specified)	`workflowid`

Modify a Task in a Workflow: Example Request

XML

JSON

XML

<workflowVertex>
      <alias>S30</alias>
      <conditionExpression />
      <task>Sleep 30</task>
      <vertexX>360</vertexX>
      <vertexY>60</vertexY>
</workflowVertex>

JSON

{
  "alias": "S30",
  "conditionExpression": null,
  "task": {
    "value": "sleep 30"
  },
  "vertexX": "360",
  "vertexY": "60"
}

Modify a Task in a Workflow: Properties

Property	UI Field Name	Description	Specifications	Required
`alias`	n/a	Alias used for the task to be modified in the workflow; specifically, the value of ops_task_workflow_vertex.name.		N
`conditionExpression`	n/a	Boolean condition expression to specify the dependency criteria.	XML: <conditionExpression> <condition> <vertexId>7</vertexId> </condition> <condition> <vertexId>10</vertexId> </condition> <compoundCondition> <condition> <vertexId>9</vertexId> </condition> <condition> <vertexId>7</vertexId> </condition> <logicalOperator>And</logicalOperator> </compoundCondition> <logicalOperator>Or</logicalOperator> </conditionExpression> JSON: "conditionExpression": { "conditions": [ { "type": "condition", "vertexId": "7" }, { "type": "condition", "vertexId": "10" }, { "type": "compoundCondition", "conditions": [ { "type": "condition", "vertexId": "9" }, { "type": "condition", "vertexId": "7" } ], "logicalOperator": "And" } ], "logicalOperator": "Or" }	N
`task`	Task Name	Name of the task to be modified in the workflow.	Cannot be modified; used only to search for the task. To modify by `task`, the task must be unique in the workflow. If both `task` and `vertextId` are specified, `vertextId` is used to search for the task to be modified.	Y (unless `vertextid` is specified.)
`vertexId`	n/a	Vertex ID of the task within the workflow. Each task within a Workflow has a unique Vertex ID to distinguish it from other tasks of the same name, if any.	Cannot be modified; used only to search for the task. If both `task` and `vertextId` are specified, `vertextId` is used to search for the task to be modified.	Y (unless `task` is specified.)
`vertexX`	n/a	x-coordinate of the task to be modified in the workflow.	Default is 0.	N
`vertexY`	n/a	y-coordinate of the task to be modified in the workflow.	Default is 0.	N

Remove a Dependency from a Workflow

	Description
URI	http://host_name/uc/resources/workflow/edges
HTTP Method	DELETE
Description	Removes a dependency from a workflow, with the dependency represented by `sourceid` and `targetid` (see Example Response, below).
URI Parameters	See Remove a Dependency from a Workflow: URI Parameters, below.
Example URI	http://localhost:8080/uc/resources/workflow/edges?workflowname=workflow1&sourceid=2&targetid=4
Authentication	HTTP Basic
Example Response	Status 200 /OK Successfully updated vertex with vertex id <vertexId>. Status 400 /Bad Request Workflow <workflowName> doesn`t exist.

Remove a Dependency from a Workflow: URI Parameters

Name	Description	Specifications	Required	Mutually Exclusive With
`sourceid`	Vertex ID of the source task.	Integer; URI parameter.	Y
`targetid`	Vertex ID of the target task.	Integer; URI parameter.	Y
`workflowid`	ID used within the Controller to identify a workflow.	String; URI parameter.	Y (unless `workflowname` is specified.	`workflowname`
`workflowname`	Name used within the Controller to identify a workflow.	String; URI parameter.	Y (unless `workflowid` is specified.	`workflowid`

Remove Task(s) from a Workflow

	Description
URI	http://host_name/uc/resources/workflow/vertices
HTTP Method	DELETE
Description	Removes one or more tasks from a workflow, with each removed task represented by a `workflowVertex` (see Example Response, below).
URI Parameters	See Remove Task(s) from a Workflow: URI Parameters, below.
Example URI	http://localhost:8080/uc/resources/workflow/vertices?workflowname=workflow1&vertexid=2 http://localhost:8080/uc/resources/workflow/vertices?workflowname=workflow1&taskname=task1 http://localhost:8080/uc/resources/workflow/vertices?workflowname=workflow1&taskalias=Task1
Consumes Content-Type	n/a
Produces Content-Type	application/xml, application/json
Authentication	HTTP Basic
Example Response	See Remove Task(s) from a Workflow: Example Response, below.
Remove Task(s) from a Workflow Properties	See Remove Task(s) from a Workflow: Properties, below.

Remove Task(s) from a Workflow: URI Parameters

If taskid, taskname, or taskalias is specified, all tasks matching the taskid, taskname, or taskalias - and their dependencies - are removed.

If vertexid is specified, only the task with that specific Vertex ID - and its dependencies - is removed.

Parameter	Description	Specifications	Required	Mutually Exclusive With
`taskalias`	Alias of the task(s) to be removed from the Workflow; specifically, the value of ops_task_workflow_vertex.name.	String; URI parameter.	Y (unless `taskid`, `taskname` or `vertexid`, is specified	`taskid`, `taskname`, `vertexid`
`taskid`	SysId of the task(s) to be removed from the Workflow.	String; URI parameter.	Y (unless `taskalias`, `taskname` or `vertexid`, is specified	`taskalias`, `taskname`, `vertexid`
`taskname`	Name of the task(s) to be removed from the Workflow.	String; URI parameter.	Y (unless `taskalias`, `taskid` or `vertexid`, is specified	`taskalias`, `taskid`, `vertexid`
`vertexid`	Vertex ID of the task to be removed from the workflow. Each task within a Workflow has a unique Vertex ID to distinguish it from other tasks, if any, of the same name.	String; URI parameter.	Y (unless `taskalias`, `taskid` or `taskname`, is specified	`taskalias`, `taskid`, `taskname`
`workflowid`	ID used within the Controller to identify a workflow.	String; URI parameter.	Y (unless `workflowname` is specified.	`workflowname`
`workflowname`	Name used within the Controller to identify a workflow.	String; URI parameter.	Y (unless `workflowid` is specified.	`workflowid`

Remove Task(s) from a Workflow: Example Response

XML

JSON

XML

<workflowVertices>
    <workflowVertex>
        <alias>Task 1</alias>
        <conditionExpression />
        <task sysId="1010f538c0a801c900e0fe0af94d9be5">task1</task>
        <vertexId>5</vertexId>
        <vertexX>253</vertexX>
        <vertexY>296</vertexY>
    </workflowVertex>
</workflowVertices>

JSON

[ 
  {
    "alias": "task 1",
    "conditionExpression": null,
    "task": {
      "sysId": "1010f538c0a801c900e0fe0af94d9be5",
      "value": "task1"
    },
    "vertexId": "5",
    "vertexX": "253",
    "vertexY": "296"
  } 
]

Note

If there are no matching tasks to remove, an empty list is returned.

Remove Task(s) from a Workflow: Response Properties

This response contains a list of tasks removed from a workflow

Property	UI Field Name	Description
`alias`	n/a	Alias of the task removed from the Workflow; specifically, the value of ops_task_workflow_vertex.name.
`conditionExpression`	n/a	Boolean condition expression to specify the dependency criteria.
`task`	Task Name	Name of the task removed from the Workflow.
`vertexId`	n/a	Vertex ID of the task removed from the Workflow. Each task within a Workflow has a unique Vertex ID to distinguish it from other tasks of the same name, if any.
`vertexX`	n/a	x-coordinate of the task removed from the Workflow.
`vertexY`	n/a	y-coordinate of the task removed from the Workflow.

Workflow Task and Dependency Web Services

Overview

Add a Dependency to a Workflow

Add a Dependency to a Workflow: URI Parameters

Add a Dependency to a Workflow: Example Request

Add a Dependency to a Workflow: Request Properties

Add a Task to a Workflow

Add a Task to a Workflow: URI Parameters

Add a Task to a Workflow: Example Request

Add a Task to a Workflow: Example Response (Status 200)

Add a Task to a Workflow: Request/Response Properties

List Dependencies in a Workflow

List Dependencies in a Workflow: URI Parameters

List Dependencies in a Workflow: Example Response

List Dependencies in a Workflow: Properties

List Tasks in a Workflow

List Tasks in a Workflow: URI Parameters

List Tasks in a Workflow: Example Response

List Tasks in a Workflow: Response Properties

Modify a Dependency in a Workflow

Modify a Dependency in a Workflow: URI Parameters

Modify a Dependency in a Workflow: Example Request

Modify a Task in a Workflow

Modify a Task in a Workflow: URI Parameters

Modify a Task in a Workflow: Example Request

Modify a Task in a Workflow: Properties

Remove a Dependency from a Workflow

Remove a Dependency from a Workflow: URI Parameters

Remove Task(s) from a Workflow

Remove Task(s) from a Workflow: URI Parameters

Remove Task(s) from a Workflow: Example Response

Remove Task(s) from a Workflow: Response Properties