Overview

This page tells you how to create a Universal Template, Universal Template Fields, Universal Template Field Choices, and Universal Template Event Templates.

You must create Universal Templates in order to create Integrations. For each Universal Template that you create, Universal Controller creates a Universal Task type for which you can create one or more Universal Tasks.

Each Universal Field that you create for a Universal Template becomes a field in every Universal Task based on the corresponding Universal Task type.

If the Universal Template Field that you create is a Choice (drop-down list) field, you must create the choices.

If the Universal Template Template Type is Extension, you can create Event Templates for the Universal Template .

For detailed information on Universal Templates and Fields, see Universal Templates Overview.

Creating a Universal Template

Step 1	From the Administration navigation pane, select Configuration > Universal Templates. The Universal Templates list displays. Note The System Template column. which does not display by default, identifies any Built-In Universal Templates that have been loaded from the List/Load Built-In Universal Templates server operation. To the right of the list, Universal Template Details for a new Universal Template displays.
Step 2	Enter / select Details for a new Universal Template, using the field descriptions below as a guide. Required fields display an asterisk ( * ) after the field name. Default values for fields, if available, display automatically. To display more of the Details fields on the screen, you can either: Use the scroll bar. Temporarily hide the list above the Details. Click the New button above the list to display a pop-up version of the Details.
Step 3	Click a Save button. The template is added to the database, and all buttons and tabs in the Universal Template Details are enabled.

Note

To open an existing record on the list, either:

Click a record in the list to display its record Details below the list. (To clear record Details below the list, click the New button that displays above and below the Details.)
Clicking the Details icon next to a record name in the list, or right-click a record in the list and then click Open in the Action menu that displays, to display a pop-up version of the record Details.
Right-click a record in the a list, or open a record and right-click in the record Details, and then click Open In Tab in the Action menu that displays, to display the record Details under a new tab on the record list page (see Record Details as Tabs).

Universal Template Details

The following Universal Template Details is for a new Universal Template, which does not yet contain any user-defined Fields. (See Creating Universal Template Fields for an existing Universal Template Details containing user-defined fields.)

Depending on the values that you enter / select for these fields, more (or less) other fields may display. See the field descriptions, below, for a description of all fields that may display in the Universal Template Details.

For information on how to access additional details - such as Metadata and complete database Details - for Universal Templates (or any type of record), see Records.

Universal Template Details Field Descriptions

The following table describes the fields, buttons, and tabs that display in the Universal Template Details.

Field Name	Description
General	This section contains general information about the template.
Name	Name of this Universal Template.
Extension	If Template Type is Extension; Python Extension name.
Description	Description of this record. Maximum length is 255 characters.
Variable Prefix	Variable prefix to append to the default prefix (ops_) for the system-assigned variables that are provided for the user-defined Fields in this Universal Template. The format of a system-assigned variable is: `ops_`, followed by the specified Variable Prefix, followed by the underscore character `_`, followed by the Name (not the Label) of the user-defined Field. For example: `ops_oebs_username`. System-assigned variables are meant to be incorporated into the Script specified for the Universal Template. All system-assigned variables embedded in a Universal Template Script will be resolved when the Universal Task created from the template executes the Script.
Icon	Icon used for all Universal Tasks based on this Universal Template. The icon displays in the following locations: Workflow Editor A default icon displays in the Icon field for every Universal Template (see Universal Template Details, above). If you want to select a custom icon, click the Browse button and then search and select that icon. Any custom icon must be a PNG image, 48 x 48 pixels. Note The button that lets you search for an icon file, and the text message alongside it, is browser-dependent. In this example, which shows a Browse... button and No file selected. text, the browser was Firefox. After you select a custom icon, the file name for that icon displays next to the Browse button. When you save / update the Universal Template, the icon displays in the Icon field, but the file name no longer displays. If you selected a custom icon but want to restore the default icon, right-click anywhere in the Universal Template Details and, in the Action menu, click Restore Default Icon.
Log Level	If Template Type is Extension; Log Level for Universal Extension logging. Specify Inherited to inherit the Agent Log Level setting
Universal Template Details	This section contains assorted detailed information about the template.
Template Type	Type of Universal Template. Options: Script Universal Template will be executed as a Script. Extension Universal Template will be executed through the Universal Extension framework.
Send Extension Variables	If Template Type is Extension; Specification for whether the Extension should be provided with task instance variable data when launched. Options: None Do not provide the Extension with task instance variable data. Local Provide the Extension with task instance variable data.
Agent Type	Type of Agent on which Universal Tasks based on this template can be run. Options: Any Linux/Unix Windows
Always Cancel On Force Finish	Specification for whether or not to always perform a Cancel when Force Finishing a Universal Task for this template.
Use Common Script	If Template Type is Script and Agent Type is Any; Indication that the specified Script can be executed by both Linux/Unix and Windows Agents.
Script	If Use Common Script is enabled; Script to be executed by the specified Agent.
Linux/Unix Script	If Template Type is Script and Agent Type is Linux/Unix or Any (and Use Common Script is not enabled); Script to be executed by the Linux/Unix Agent.
Windows Script	If Template Type is Script and Agent Type is Windows or Any (and Use Common Script is not enabled); Script to be executed by the Windows Agent.
Windows Script File Type	If Template Type is Script and Agent Type is Windows or Any; Type of Windows script to be executed by the Windows Agent. Options: bat cmd js ps1 py uapy vbs wsf Other... (any user-specified script file type)
Agent Defaults	This section contains Agent default fields that will display for every Universal Task based on this template.
Cluster	Indication that selecting an Agent Cluster is required and selecting Broadcast, which lets you select a Cluster Broadcast, is optional. If Cluster is selected, selecting an Agent is not required unless Agent Variable is selected.
Broadcast	Displays only if Cluster is selected; Indication that selecting a Cluster Broadcast is required. Selecting Broadcast hides the Agent and Agent Cluster fields; you cannot select values for them.
Agent	Name of the Agent resource that identifies the machine where the operation will run.
Agent Cluster	Group of Agents, one of which the Controller will choose to run this task (compare with Cluster Broadcast). You can specify an agent cluster in addition to or in place of a specific Agent. If you specify an Agent and an agent cluster, the Controller first tries to run the task on the specific agent. If the Agent is not available, the Controller reverts to the agent cluster. See Agent Clusters for more information.
Agent Variable	Indication of whether the Agent field is a reference field for selecting a specific Agent (unchecked) or a text field for specifying the Agent as a variable (checked). Use the format: ${variable name}. The variable must be a supported type as described in Variables and Functions. Note When updating multiple Tasks, to change from using an Agent reference to using an Agent variable, you must change the Agent Variable field to Yes and specify the Agent variable in the Agent Unresolved field. Conversely, to change from using an Agent variable to using an Agent reference, you must change the Agent Variable field to No and specify the Agent reference in the Agent field.
Agent Cluster Variable	Indication of whether the Agent Cluster field is a reference field for selecting a specific Agent Cluster (unchecked) or a text field for specifying the Agent Cluster as a variable (checked). Use the format: `${variable name}`. The variable must be a supported type as described in Variables and Functions. Note When updating multiple Tasks, to change from using an Agent Cluster reference to using an Agent Cluster variable, you must change the Agent Cluster Variable field to Yes and specify the Agent Cluster variable in the Agent Cluster Unresolved field. Conversely, to change from using an Agent Cluster variable to using an Agent Cluster reference, you must change the Agent Cluster Variable field to No and specify the Agent Cluster reference in the Agent Cluster field.
Credentials	Credentials under which an Agent runs this task. These Credentials override any Credentials provided in the Agent Details for any Agent running this task. If the user does not have a login shell, add a - character in front of the runtime credentials name. The Controller will provide a shell for that user and strip the - character from the name.
Credentials Variable	Indication of whether the Credentials field is a reference field for selecting a specific Credential (unchecked) or a text field for specifying the Credential as a variable (checked). Use the format: `${variable name}`. The variable must be a supported type as described in Variables and Functions. Note When updating multiple Tasks, to change from using a Credentials reference to using a Credentials variable, you must change the Credentials Variable field to Yes and specify the Credentials variable in the Credentials Unresolved field. Conversely, to change from using a Credentials variable to using a Credentials reference, you must change the Credentials Variable field to No and specify the Credentials reference in the Credentials field.
Cluster Broadcast	Group of Agents, all of which will run this task (compare with Agent Cluster). If Broadcast is selected for a task, you must select a Cluster Broadcast instead of a specific Agent and/or agent cluster. Each instance of the task running on its own Agent becomes a separate task instance record in the database and displays separately on the Activity Monitor.
Cluster Broadcast Variable	Indication of whether the Cluster Broadcast field is a reference field for selecting a specific Cluster Broadcast (unchecked) or a text field for specifying the Cluster Broadcast as a variable (checked). Use the format: `${variable name}`. The variable must be a supported type as described in Variables and Functions.
Run with Highest Privileges	If Agent Type is Windows or Any; Execute the task using an elevated privileges token, rather than one subject to User Account Control (UAC) restrictions. An elevated token allows a process to execute with all the privileges available to its specified credentials. For example, a task executed with an administrative account will behave as though it received permission via a UAC dialog to perform a privileged operation. This option will not give a user account privileges that have are not already granted to it. For example, taking ownership of a file is a privileged operation by default. A task will still fail even with this option selected if it is run with a regular user account that has not been granted the ability to change file ownership. Note This option only will affect tasks executed on Windows systems that support User Account Control (UAC). It will have no affect on tasks run on Windows releases prior to Vista (for example, Windows XP, Server 2003).
Template Defaults	This section contains template-specific default fields that will display for every Universal Task based on this template.
Runtime Directory	Directory from which the application should be executed. Variables supported.
Environment Variables	Allows you to enter environment variables needed by the program to run. To add a variable, click the + icon and enter a Name and Value. To delete a variable, select in the list of variables and click the - icon. You can add a maximum of 4,000 characters for the combined Names and Values of all variables. The variable is listed in the space underneath.
Result Processing Defaults	This section contains assorted detailed information about result processing defaults for this task.
Exit Code Processing	Specifies how the Controller should determine whether the executed command failed or completed successfully. Options: Success Exitcode Range Command is considered completed successfully if its exit code falls within the range specified in the Exit Codes field. Failure Exitcode Range Command is considered failed if its exit code falls within the range specified in the Exit Codes field. Success Output Contains Command is considered completed successfully if its output contains the text specified in the Scan Output For field. Failure Output Contains Command is considered failed if its output contains the text specified in the Scan Output For field. Step Conditions (z/OS only) Command is considered completed successfully/failed if any of its specified condition codes falls within the range specified under the Step Conditions tab (see Creating Step Conditions).
Output Type	Required if Exit Code Processing = Success Output Contains or Failure Output Contains; type of output. Options: Standard Output (STDOUT) Standard Error (STDERR) File Extension
Content Type	If Output Type is Extension; Output type that the Result Processing mechanism should assume when evaluating the output. If the expected output is XML or JSON, it is valid to specify Text. However, when specifying XML or JSON, the output must be XML or JSON respectively; otherwise, the parsing will fail and the path expression evaluation will return no matches.
Path Expression	XPath Expression if Content Type is XML, or the JsonPath Expression if Content Type is JSON, to be used when evaluating the Extension output.
Operator	If Output Type is Extension; Condition Operator to evaluate in combination with the specified condition Value.
Value	If Output Type is Extension; Condition Value to evaluate in combination with the specified condition Operator.
Strategy	If Content Type is XML or JSON; Strategy to take when applying the condition Operator and Value against the Path Expression matches when Content Type is XML or JSON.
Auto Cleanup	Enables the auto cleanup of Extension output upon task instance completion or, if the task instance is within a workflow, when the top level workflow instance completes.
Scan Output For	Required if Exit Code Processing = Success Output Contains or Failure Output Contains; text for which the Controller should scan the output file. The Controller will process this field as a regular expression.
Output File (for Exit Code Processing)	Required if Output Type = File; path and file name of the output file that should be scanned for the text in the Scan Output For field.
Exit Codes	Required if Exit Code Processing = Success Exitcode Range or Failure Exitcode Range; range of exit codes. Format: Numeric. Use commas to list a series of exit codes; use hyphens to specify a range. Example: 1,5, 22-30. Variables are supported.
Automatic Output Retrieval	Specifies whether you want the Controller to automatically retrieve any output from the job and attach it to the task instance record. The Task Automatic Output Retrieval Default Universal Controller system property specifies the default value for this field. Options: None Do not attach any output to the task instance record. Standard Output Attach all standard output. Standard Error Attach standard error output. File Attach the file specified in the Output File field. Standard Output/Error Attach all standard output and standard error output. Note Tasks specifying Automatic Output Retrieval will fail with Start Failure if the Agent Output Prohibited field is true in the Details of the specified Agent.
Wait For Output	If Automatic Output Retrieval = Standard Output, Standard Error, File, or Standard Output/Error, and Failure Only is not enabled (checked); Specification that the task should wait for the requested output before completing.
Failure Only	If Automatic Output Retrieval = Standard Output, Standard Error, File, or Standard Output/Error, and Wait For Output is not enabled (checked); Indication for whether output should be retrieved on task failure only.
Start Line	If Automatic Output Retrieval = Standard Output, Standard Error, File, or Standard Output/Error; Instructs the Controller to retrieve data beginning at the line indicated. If a Start Line value is not specified, the default is 1. If the Start Line value is -1, data will be retrieved starting at the end of the file.
Number of Lines	If Automatic Output Retrieval = Standard Output, Standard Error, File, or Standard Output/Error; Allows you to limit the retrieved data to the number of lines specified. If a Number of Lines value is not specified, the default is the value of the Retrieve Output Default Number Of Lines Universal Controller system property.
Scan Text	If Automatic Output Retrieval = Standard Output, Standard Error, File, or Standard Output/Error; Regex pattern that the Controller will search for a match for in STDOUT/STDERR or a specified file. The Controller will include the Number of Lines above and below the first line matched. if the Regex pattern is not found, the following message is returned: OPSWISE WARNING - Scan text string not found.
Output File (for Automatic Output Retrieval)	Required if Automatic Output Retrieval = File; path and file name containing the output that you want automatically retrieved and attached to the task instance.
Field Restrictions	This section lets you specify how fields in the Defaults section of the Universal Template are displayed in Universal Tasks based on the template. The Field Restrictions section places the fields in the Default section into five groups, as shown below: Agent, Credential, Environment Variables, Exit Code Processing, Automatic Output Retrieval. All fields in a field group share the same restriction. The Restriction options are the same for each field group: No Restriction No restrictions apply to any fields in this group. {This is the default selection for all field groups.) Read Only All fields in the field group display as Read Only in the Universal Task. Hidden All fields in the field group are hidden in the Universal Task. Note If the Preserve Value If Hidden field is enabled for a hidden field: The value of that field will not be reset upon an update. Any variable related to that field will resolve to the field value.
Agent Fields	Restriction for the following Agent fields: Agent, Agent Variable, Agent Cluster, Agent Cluster Variable, and Cluster Broadcast.
Credential Fields	Restriction for the following Credential fields: Credentials, Credentials Variable, Run with Highest Privileges, and Runtime Directory.
Environment Variables Fields	Restriction for the following Environment Variable field: Environment Variables.
Exit Code Processing Fields	Restriction for the following Exit Code Processing fields: Exit Code Processing, Exit Codes, Output Type, Scan Output for, and Output File.
Automatic Output Retrieval Fields	Restriction for the following Automatic Output Retrieval Fields: Automatic Output Retrieval, Wait For Output, Failure Only, Start Line, Number of Lines, Scan Text, and Automatic Output File.
Metadata	This section contains Metadata information about this record.
UUID	Universally Unique Identifier of this record.
Updated By	Name of the user that last updated this record.
Updated	Date and time that this record was last updated.
Created By	Name of the user that created this record.
Created	Date and time that this record was created.
Extension Checksum	SHA-256 checksum for the Python Extension Archive.
Extension Version	Version of the Extension.
Extension API Level	API level that the Extension is compatible with.
Extension Requires Python	Python version(s) that the Python Extension Archive is guaranteed to be compatible with.
Extension Python Extra Paths	List of paths to add to the search path for Python modules.
Extension Zip Safe	When true, specifies the extension should run as a zip file. (default) When false, specifies the extension should run from a folder with the extracted extension and platform dependency wheel.
Extension Owner	Author of the Extension.
Extension Organization	Organization of the Author.
Extension Comments	(Any comments about the Extension.)
Buttons	This section identifies the buttons displayed above and below the Universal Template Details that let you perform various actions.
Save	Saves a new Universal Template record in the Controller database.
Save & New	Saves a new Universal Template record in the Controller database and redisplays empty Details so that you can create another Universal Template.
Save & View	Saves a new Universal Template record in the Controller database and continues to display that record.
New	Displays empty (except for default values) Details for creating a new record.
Update	Updates the Universal Template record in the Controller database.
Delete	Delete the currently open Universal Template.
Refresh	Refreshes any dynamic data displayed in the Universal Template Details.
Close	For pop-up view only; closes the pop-up view of this Universal Template.
Tabs	This section identifies the tabs across the top of the Universal Template Details that provide access to additional information about the template.
Fields	Allows you to create the user-defined fields that will display in the Universal Tasks based on this template.
Commands	If Template Type is Extension; additional commands (operations) supported against a task instance (see Creating Commands,

Creating Universal Template Fields

Universal Template Fields are assigned variables to be used in the Universal Template script and placed in the Details of any Universal Task based on the Universal Template.

Step 1	From the Administration navigation pane, select Configuration > Universal Templates. The Universal Templates list displays.
Step 2	Open an existing Universal Template for which you want to create Fields.
Step 3	Click the Fields tab to display the Fields list.
Step 4	Click the button to display Field Details for a new Field.
Step 5	Enter / select Details for a new Field, using the field descriptions below as a guide. Required fields display an asterisk ( * ) after the field name. Default values for fields, if available, display automatically.
Step 6	Click a button. The Field is added to the list of Universal Template Fields. If you click the Save or Save & View button after creating a Choice Field (Type = Choice), the Choices tab (under which is an empty Choices list) is enabled, and an empty Choice Details automatically displays, which lets you create your first Choice. If you click the Save & New button after creating a Choice Field, in order to create one or more other Fields, you will have to manually open that Choice Field, click the enabled Choices tab, and then click the New button to create your first Choice.

Field Details Field Descriptions

The following table describes the fields, buttons, and tabs that display in the Field Details.

Field Name

Description

General

This section contains general information about the Field.

Name

Name of this Field in the Controller database. (Name is used as the suffix for the Universal Template Variable based on this Field.)

Maximum 28 characters.
Name must begin with an alphabetic character and can consist of: alphabetics (a-z, A-Z), numerics 0-9, _ (underscore).
White spaces are not permitted.
Names are not case-sensitive.

Label

Name of this Field to be displayed in the Controller user interface.

Hint

Field hint for this Field in the Controller user interface.

Add To Default List View

If enabled; Specification that the Label of this Field will display, by default, in the list of Universal Tasks based on this template.

Field Details

This section contains detailed information about the Field.

Type

Field type for this Field.

Options:

Text (default)
Integer
Boolean
Choice
Credential
Script
Array
Float
SAP Connection
Database Connection

Text Type

For Extension-based Universal Templates only; Content type of Text field:

Plain
JSON
YAML

Restriction

If Type is Text, Integer, or Boolean:

Options:

No Restriction
Output Only

Mapping

Field, from a pool of available fields provided for use in a Universal Template, that this Field is mapped to.

Options:

If Type is Text: Text Field 1 - Text Field 20, Large Text Field 1 - Large Text Field 4.
If Type is Integer: Integer Field 1 - Integer Field 10.
If Type is Boolean: Boolean Field 1 - Boolean Field 15.
If Type is Choice: Choice Field 1 - Choice Field 15.
If Type is Credential: Credential Field 1 - Credential Field 6.
If Type is Script: Script Field 1 - Script Field 2.
If Type is Array: Array Field 1 - Array Field 4.
If Type is Float: Float Field 1 - Float Field 4.
If Type is SAP Connection: Sap Connection Field 1.
If Type is Database Connection: Database Connection Field 1.

Note

A field (from the pool of fields provided for use in a Universal Template) that is mapped to a Universal Template Field is not available to be mapped to any other Universal Template Field.

Default Value

If Type is Text, Integer, Choice, or Float; Default value for this Field. (Text and Choice: Maximum length = 255; Large Text: Maximum Length = 25000, Integer: Maximum length = 11; Float: maximum length = 17.)

Also if Type is Choice; In order for a Choice to display as the default for this Field in the Universal Task Details, Default Value must be the Choice Value, not the Choice Label.

If Type is Boolean; Specification (a check mark) that the Yes value for this field is the default.

If Type is Credential; Default Credential to be used for this Universal Template Field. You can select a Credential from the Default Value drop-down list or click the Details icon next to the Default Value field to create a new Credential.

Note

Since only Resolvable Credentials can be embedded in a Universal Template script or used by a Universal Extension, only Resolvable Credentials display in the Default Value drop-down list for a Credential. If you click the Details icon to create a new Credential, Resolvable is pre-selected for the Type field in the Credential Details and cannot be changed.

If Type is Script; Default Script to be used for this Universal Template Field. You can select a Script from the Default Value drop-down list or click the Details icon next to the Default Value field to create a new Script.

Note

Since only Data Scripts can be embedded in a Universal Template script or used by a Universal Extension, only Data Scripts display in the Default Value drop-down list for a Script. If you click the Details icon to create a new Script, Data is pre-selected for the Type field in the Script Details and cannot be changed.

If Type is Array; You can specify the default array variables, which can be assigned to the appropriate field while creating the task.

If Type is SAP Connection; Default SAP Connection to be used for this Universal Template Field. You can select an SAP Connection from the Default Value drop-down list or click the Details icon next to the Default Value field to create a new SAP Connection.

If Type is Database Connection; Default Database Connection to be used for this Universal Template Field. You can select a Database Connection from the Default Value drop-down list or click the Details icon next to the Default Value field to create a new Database Connection.

Boolean Value Type

If Type is Boolean: Type of Boolean value for this Field.

Options:

true/false (default)
1/0
Custom

Yes Value:

If Boolean Value Type is Custom; Boolean Yes value for this Field. (Maximum length = 255 characters).

No Value:

If Boolean Value Type is Custom; Boolean No value for this Field. (Maximum length = 255 characters).

Choice Sort Option

If Type is Choice; Specification for how Choices will be listed in the Choice field drop-down list in the Universal Task Details.

Options:

Sequence: Choices will be displayed in the sequence they were created. You can change this sequence manually on the Choices list.
Label: Choices will be displayed alphabetically by Label.

Default is Sequence.

Allow Empty Choice

If Type is Choice; Specification for whether or not an empty (blank) option is available for this Choice field in any Universal Task based on this template, allowing the user to clear the value of this field.

Allow Multiple Choices

If Type is Choice; Specification for whether or not more than one choice can be selected at a time. When multiple choices are selected, the built-in field variable will resolve to a comma-delimited String of choice values.

Name Title

If Type is Array; Option to change the default Name column for the Array field on any Universal Task based on this template to any other column title (for example, Customer Name).

Value Title

If Type is Array; Option to change the default Value column for the Array field on any Universal Task based on this template to any other column title (for example, Customer ID).

Restriction

If Type is Text, Integer, Boolean, or Float; Specification for whether or not to place an Output Only restriction on the field, which will render it as read-only on a Universal Task Instance Details but not shown on the Universal Task Details.

Preserve Output On Re-run

If Restriction specifies Output Only; Specification for whether or not an Output Only field should preserve its value on a Re-run instead of being cleared.

Extension Status

If Restriction specifies Output Only; Specification for whether or not an Output Only field is designated as Extension Status for a task instance.

Only a single field can be designated as an Extension Status.

Dynamic Choice

If Type is Choice; Specification that the field will request its choices dynamically from the Extension.

Dependent Fields

If Dynamic Choice is specified; Fields that should be included when requesting the dynamic choices.

Validation

This section contains validation information about the Field.

Required

If Type is Text, Integer, Credential, Float, SAP Connection, Database Connection or Script; Specification for whether this Field in the template is required (checked) or optional (not checked). If it is required, it will display in boldface in any Universal Tasks based on this template.

Note

If you modify a Universal Template Field to add a Required condition, review and assign an appropriate field value to any Universal Tasks that are no longer in compliance to avoid a Start Failure.

Require If Field

If Required is not checked and a Show If Field is not specified; Specification that this Field in the template will be required in any Universal Tasks based on this template if the Choice Field (Choice Field 1-15) or the Boolean Field (Boolean Field 1-15) selected as the Require If Field has a value corresponding to the value(s) defined in the Require If Field Value(s) field.

The Require If Field Value(s) field is not available until you make a Require If Field selection.

Options:

-- None --
Boolean Field 1 - Boolean Field 15.
Choice Field 1 - Choice Field 15.

Note

If you modify a Universal Template Field to add or augment a Require If Field condition, review and assign an appropriate field value to any Universal Tasks that are no longer in compliance to avoid a Start Failure.

Require If Field Value(s)

If Require If Field is a Choice field, Require If Field Value(s) is a comma-separated list of Choice values.

For example:

Require If Field Value(s)	Description
1	Field is required if the Require If Field has a choice value of 1 selected.
1,2	Field is required if the Require If Field has a choice value of 1 or 2 selected.
	Field is required if the Require If Field has the empty choice selected.
,1	Field is required if the Require If Field has the empty choice selected or a choice value of 1 selected.
,1,2	Field is required if the Require If Field has the empty choice selected or a choice value of 1 or 2 selected.

If Require If Field is a Boolean field, Require If Field Value(s) is either true or false.

Show If Field

If Required is not checked and a Require If Field is not specified; Specification that this Field in the template will be visible in any Universal Tasks based on this template if the Choice Field (Choice Field 1-15) or the Boolean Field (Boolean Field 1-15) selected as the Show If Field has a value corresponding to the value(s) defined in the Show If Field Value(s) field.

The Show If Field Value(s) field is not available until you make a Show If Field selection.

Options:

-- None --
Boolean Field 1 - Boolean Field 15.
Choice Field 1 - Choice Field 15.

Show If Field Value(s)

If Show If Field is a Choice field, the Show If Field Value(s) is a comma-separated list of Choice values.

For example:

Show If Field Value(s)	Description
1	Field is visible if the Show If Field has a choice value of 1 selected.
1,2	Field is visible if the Show If Field has a choice value of 1 or 2 selected.
	Field is visible if the Show If Field has the empty choice selected.
,1	Field is visible if the Show If Field has the empty choice selected or a choice value of 1 selected.
,1,2	Field is visible if the Show If Field has the empty choice selected or a choice value of 1 or 2 selected.

If Show If Field is a Boolean field, the Show If Field Value(s) is either true or false.

Require If Visible

If Show If Field is not - - None - -; If selected, specification that the Field is required if it is visible (see Show If Field).

Note

If you modify a Universal Template Field to add a Require If Visible condition, review and assign an appropriate field value to any Universal Tasks that are no longer in compliance to avoid a Start Failure.

No Space If Hidden

If Show If Field is not - - None - -; If selected, specification that a space should not be reserved in place of the hidden field.

Preserve Value If Hidden

If Show If Field is not - - None - -; If selected, specification that the value of this field should be preserved if the field is hidden.

Note

A Field with Preserve Value If Hidden = true will be validated even if the Field is hidden.

Also, if a Field's Show If Field or Require If Field specifies a field (for example, Boolean Field 1) that has Preserve Value If Hidden = true, when validating whether the Field is visible or required, Boolean Field 1’s value is considered visible.

Length

If Type is Text or Integer; Length of this Field.

Maximum Lengths:

Text = 255
Large Text = 25000
Integer = 11

Minimum

If Type is Integer; Minimum value for this field.

Maximum

If Type is Integer; Maximum value for this field.

Form Layout

This section contains information about the location of this Field in the Details of Universal Tasks based on this template.

Note

All user-defined Fields in a Universal Template will be located between the Credentials Variable and Runtime Directory fields in the Details section of Universal Tasks based on this template.

Start Row

If enabled; Specification that this Field will start a new row.

End Row

If enabled; Specification that this Field will end the current row.

Column Span

Number of columns (width) in the Universal Task Details for this Field.

Options:

1
2
3

Default is 1.

Sequence

For existing Fields only; System-defined; Sequence of this Field among all user-defined Universal Template Fields to be displayed in the Universal Task Details. Starting sequence is 0 for the first defined Field.

Note

You can change the Sequence of user-defined Universal Template Fields by dragging them to new locations on the Fields list.

Metadata

This section contains Metadata information about this record.

UUID

Universally Unique Identifier of this record.

Updated By

Name of the user that last updated this record.

Updated

Date and time that this record was last updated.

Created By

Name of the user that created this record.

Created

Date and time that this record was created.

Buttons

This section identifies the buttons displayed above and below the Field Details that let you perform various actions.

Save

Saves a new Field record in the Controller database.

Save & New

Saves a new Field record in the Controller database and redisplays empty Details so that you can create another Field.

Save & View

Saves a new Field record in the Controller database and continues to display that record.

New

Displays empty (except for default values) Details for creating a new Field.

Update

Updates the Field record in the Controller database.

Delete

Delete the currently open Field.

Note

You cannot delete a field if it is the only field in the Template.

Refresh

Refreshes any dynamic data displayed in the Field Details.

Close

Closes the Field Details.

Tabs

This section identifies the tabs across the top of the Field Details that provide access to additional information about the Field.

Choices

If Type is Choice; Allows you to define the Choices for this Field in the template.

Creating Universal Template Field Choices

If you created a Choice Field (Type = Choice) for a Universal Template, you must create Choices for that Choice Field that will display in a drop-down list in all Universal Tasks based on this Universal Template.

If you click the Save button after creating the Choice Field, the Choices tab (under which is an empty Choices list) is enabled, and an empty Choice Details automatically displays, which lets you create your first Choice.
If you click the Save & New button after creating a Choice Field, so that you can immediately create one or more other Fields, you will have to manually open that Choice Field, click the enabled Choices tab, and then click the New button to create your first Choice.

The following procedure assumes that you have created a Choice Field but not yet created any Choices for it.

Step 1	On the Fields list for the Universal Template, open the Choice Field (Type = Choice) whose Choices you want to create.
Step 2	Click the Choices tab to display an empty Choices list.
Step 3	Click New to display Choice Details for a new Choice.
Step 4	Enter Details for a new Choice Field, using the field descriptions below as a guide.
Step 5	Click a Save button. Each Choice that you define is added to the Choices list.

Choice Details Field Descriptions

The following table describes the fields, buttons, and tabs that display in the Choice Details.

Field Name	Description
General	This section contains general information about the Field.
Value	Value of this Choice. (Maximum length = 255 characters.)
Use Value For Label	If the Value field value is 50 characters or less; Use the Value field value as the Label field value (which is a maximum 50 characters).
Label	If Use Value For Label is not checked; Name that will display for this Choice in the drop-down list on a Universal Task. (Maximum = 50 characters.)
Sequence	For existing Choices only; System-defined sequence of this Choice among all Choices defined for this Field. Starting sequence is 0 for the first defined Choice. Note If you select Sequence in the Choice Sort Option field in the Details for this Choice Field, you can sort the Choices by clicking and dragging them to any position on the Choices List. In the Details of any Universal Task based on this Universal Template, the Labels for these Choices will display in the Choice Field drop-down list in the order you select.
Metadata	This section contains Metadata information about this record.
UUID	Universally Unique Identifier of this record.
Updated By	Name of the user that last updated this record.
Updated	Date and time that this record was last updated.
Created By	Name of the user that created this record.
Created	Date and time that this record was created.
Buttons	This section identifies the buttons displayed above the Choice Details that let you perform various actions.
Save	Saves a new Choice record in the Controller database.
Save & New	Saves a new Choice record in the Controller database and redisplays empty Details so that you can create another Choice.
Save & View	Saves a new Choice record in the Controller database and continues to display that record.
New	Displays empty (except for default values) Details for creating a new Choice.
Update	Updates the Choice record in the Controller database.
Delete	Deletes the currently open Choice. Note You cannot delete a Choice if it is the only Choice for the Field.
Refresh	Refreshes any dynamic data displayed in the Choice Details.
Close	Closes the Choice Details.

Creating Commands

Commands allow you to define additional operations against a task instance.

Command Details Field Descriptions

The following table describes the fields and buttons that display in the Command Details.

Field Name	Description
Name	Unique name of this command, adhering to the same naming convention as a Universal Template field name.
Label	User-friendly display name for the command, to be displayed within the client.
Supported Status(es)	Task instance status(es) that the dynamic command should be enabled for.
Dependent Fields	Universal Template fields (if any) that are required by the command. The values of those fields are included in the command request.
Timeout (Seconds)	Optional command timeout, in seconds, if the command requires longer than the System-level default of 60 seconds. If the Controller (server) does not receive a command response from the Extension prior to the timeout being reached, a timeout message will be sent to the client (user interface), and displayed in the console. However, the server-side handling of the command response, like the persistence of command output, will still be handled by the server after the timeout occurs.
Execution Option	Specification for whether the command runs out-of-process execution or in-process execution. Options: Out Of Process In Process Default is Out Of Process.
Asynchronous	If Execution Option is In Process; Specification for whether the command runs synchronously or asynchronously.
Buttons	This section identifies the buttons displayed above and below the Field Details that let you perform various actions.
Save	Saves a new Field record in the Controller database.
Save & New	Saves a new Field record in the Controller database and redisplays empty Details so that you can create another Field.
Save & View	Saves a new Field record in the Controller database and continues to display that record.
Close	Close the Command Details.

Command Permission

Users must have Universal (or ALL) command permission and Read permission for the Universal Task Instance, assigned by the Task Instance permission type, for authorization to execute a Universal dynamic command.

Command Output

Optionally, a dynamic command can return output in the response, which would be displayed immediately to the user who issued the command.

A user can view the output generated by the command later by going to the Task Instance > Output tab.

The Type will show as COMMAND, and to allow for better correlation, a new Command Name field will display the label of the command that generated the output.

Creating Event Templates

Universal Events are administrator-defined events with administrator-defined attributes.

Universal Events can be defined:

Globally	In a Universal Event Template.
Locally	As part of a Universal Extension-based Universal Template.

If the Universal Extension can generate a non-global Universal Event, you must define the Universal Event here to allow the event to be monitored by an Universal Monitor.

Note

When publishing Universal Events through an Extension-based Universal Task Publisher, take into consideration both Universal Controller server and Database server sizings.

Event Template Details Field Descriptions

The following table describes the fields and buttons that display in the Event Template Details.

Field Name	Description
Name	Name of this Universal Event.
Label	User-friendly display name for this event, to be displayed within the client. The Label must be unique for Global Events and unique within Local Events..
Description	Description of this event.
Time To Live	Default value for the length of time, in minutes, that the Universal Event data is valid. This value can be unspecified (null). The Time To Live value can be overridden in the published event. If the Time To Live does not exist in the published event, then this value, if defined, will be used. If neither value exists, the Time To Live is 0, which means the event is deleted as soon as it is published.
Unmapped Attributes Policy	Defines how unmapped/unknown attributes that are in the published event are handled. Prohibit Universal Event If the published event has any attributes that have not been defined in the template, the publish is rejected and not allowed. Include Attributes Any extra attributes will be allowed and passed through as variables. Exclude Attributes Any extra attributes are excluded and ignored. They will not be passed along as variables.
Attributes	Name, Label, and Type of each attribute. Name Unique name for this attribute. Label User-friendly display name for this attribute, to be displayed within the client. Type Type of attribute: Text Integer Float Boolean
System Event	Indication if this type of event is a System Event.

Auditing Universal Events

The Universal Event Extension Publish Audit lets you specify whether or not an audit record is generated for each Universal Event published through an Extension-based Universal Task Instance.

(The Universal Event Web Service Publish Audit lets you specify whether or not an audit record is generated for each Universal Event published through the Universal Event Web Services.)

Note

Enabling these audit properties can generate a large quantity of audit.