SSL/TLS Options - Universal Connector for PeopleSoft
Description
The SSL/TLS options are used to configure the environment and behavior of HTTPS connections with the PeopleSoft system. The SSL/TLS configuration options can be used with any command, but they only impact HTTPS connections.
Command Line Syntax
The following figure illustrates the command line syntax of the /wiki/spaces/DEV/pages/120324397, using their command line, long form.
{-ssl_cipher_list list -ssl_cipher_suites list [-ca_certs file] [-cert file] [-days number] [-private_key file [-private_key_pwd password]] [-verify_host_name option] [-verify_peer option]
SSL/TLS Options List
The following table describes all SSL/TLS configuration options and provides the command line, long form of each option illustrated in the SSL/TLS options /wiki/spaces/DEV/pages/120324397, above.
Configuration | Command Line | Description |
|---|---|---|
-ssl_cipher_list | SSL/TLS cipher suites acceptable for use by the SSL/TLS protocol. | |
-ssl_cipher_suites | SSL/TLS 1.3 specific cipher suites acceptable for use by the SSL/TLS 1.3 protocol. | |
-cert | File name of the PEM-formatted X.509 certificate that identifies Universal Connector for PeopleSoft. | |
-days | Number of days prior to certificate expiration to begin issuing informational messages about the expiration. | |
-ca_certs | Location of the PEM-formatted trusted Certificate Authority (CA) X.509 certificates file. | |
-port | Path of the UPPS PEM-formatted RSA private key. | |
-port | Password for the UPPS PRIVATE_KEY. | |
-verify_host_name | Specification for whether or not the server's X.509 certificate host name field must be verified. | |
-verify_peer | Specification for whether or not the server's X.509 certificate is verified. |