Composite Trigger

Overview

The Composite trigger consists of Time, Agent File Monitor, Task Monitor, Variable Monitor, and Email Monitor components - which function like Time, Agent File Monitor, Task Monitor, Variable Monitor, and Email Monitor triggers - that allow you to trigger one or more tasks based on correlated events from those components.

Each Composite trigger can contain the following number of components:

When you enable a Composite trigger, all components of that trigger are enabled. Each enabled component has its own event queue. When a component fires, an event is enqueued and the component notifies its parent Composite trigger. The Composite trigger will then check the event queues of all of its components and launch the specified task(s) if a correlated set of events is found.

Note

If a Composite trigger has Restrict Times enabled, its components will be enabled only within the specified Enabled Start and Enabled End times:

  • If the Composite trigger is disabled. the components stay disabled.
  • If the Composite trigger is enabled, and the time is within its specified Enabled Start and Enabled End times, its components will be enabled.
  • If the Composite trigger is enabled, and the time is outside of its specified Enabled Start and Enabled End times, its components will stay disabled.

The Composite Trigger Details provides the following fields for component queue specifications:

  • Time Limit and Time Limit Units specify the length of time that events are maintained in all component queues.
  • Queue Depth specifies the maximum number of events that can be contained in each component queue. If the maximum has been reached but more events are ready to be placed in a queue, the oldest events are discarded.

Built-In Variables

In order to propagate built-in variables up to a Composite trigger, from the files, tasks, and variables being monitored by its File Monitor, Task Monitor, Variable Monitor, and Email Monitor components, the Component Details provide a Variable Prefix field.

  • If a Variable Prefix is not specified, no built-in variables for that component will be propagated.
  • If a Variable Prefix is specified, all built-in variables supported by the component type will be propagated using the specified prefix rather than the reserved ops_ prefix.

Additionally, all components - File Monitor, Task Monitor, Variable Monitor, Email Monitor, and Time - support the built-in variable <prefix>trigger_component_event_time that resolves to the time when the component fired.

Monitoring Component Status

You can monitor the following statuses of each enabled component in its component Details (available via the Components tab of the Composite trigger).
 

Forecasting

Forecasting is not supported for Composite triggers.

Creating a Composite Trigger

Step 1

From the Automation Center navigation pane, select Triggers > Composite Triggers. The Composite Triggers list displays.
 
To the right of the list, Composite Trigger Details for a new Composite trigger displays.
 

Step 2

Enter/select Details for a new Composite trigger, using the field descriptions below as a guide.

  • Required fields display an asterisk ( * ) after the field name.
  • Default values for fields, if available, display automatically.

To display more of the Details fields on the screen, you can either:

  • Use the scroll bar.
  • Temporarily hide the list above the Details.
  • Click the  button above the list to display a pop-up version of the Details.

Step 3

Click a  button. The trigger is added to the database, and all buttons and tabs in the Trigger Details are enabled.

Step 4

Enable the trigger(s) as desired.

Note

To open an existing record on the list, either:

  • Click a record in the list to display its record Details below the list. (To clear record Details below the list, click the New button that displays above and below the Details.)
  • Clicking the Details icon next to a record name in the list, or right-click a record in the list and then click Open in the Action menu that displays, to display a pop-up version of the record Details.
  • Right-click a record in the a list, or open a record and right-click in the record Details, and then click Open In Tab in the Action menu that displays, to display the record Details under a new tab on the record list page (see Record Details as Tabs).

Composite Trigger Details

The following Composite Trigger Details is for an existing Composite trigger. See the field descriptions, below, for a description of the fields that display in the Composite Trigger Details.
 

Composite Trigger Details Field Descriptions

The following table describes the fields, buttons, and tabs that display in the Composite Trigger Details.
 

Field Name

Description

General

This section contains general information about the trigger.

Name


Name used within the Controller to identify this trigger. It can contain a maximum of 255 alphanumerics. It is the responsibility of the user to develop a workable naming scheme for triggers.

Version

System-supplied; version number of the current record, which is incremented by the system every time a user updates a record. Click the Versions tab to view previous versions. For details, see Record Versioning.

Description

Description of this record. Maximum length is 255 characters.

Member of Business Services

User-defined; Allows you to select one or more Business Services that this record belongs to.  (You also can Check All or Uncheck All Business Services for this record.)

You can select up to 62 Business Services for any record type, and enter a maximum of 2048 characters for each Business Service.

If the Business Service Visibility Restricted Universal Controller system property is set to true, depending on your assigned (or inherited) Permissions or Roles, Business Services available for selection may be restricted.

Calendar


Calendar that defines the business days, holidays, and other special days that determine the run dates for the task(s) specified in the trigger.

Select a Calendar from the drop-down list of all existing Calendars. To display detailed information about a selected calendar, click the Details icon next to the Calendar field.


Time Zone

User-defined; allows you to specify the time zone that will be applied to the time(s) specified in the trigger. For example, if you specify 23:00 and a time zone of Canada/Central, the task will run at 11:00 p.m. Central Canada time.

Task(s)

Name of the task(s) being triggered when this trigger is satisfied. When selecting tasks from the Details, click on the lock icon to unlock the field and select tasks.

Purge By Retention Duration


Specification for whether triggered task instances can be purged by retention duration.

Exclude Backup

If Purge By Retention Duration is selected; Specification for whether qualifying task instances can be excluded from the backup when being purged by retention duration.

Retention Duration

If Purge By Retention Duration is selected; Minimum retention duration for the selected Retention Duration Unit before triggered task instances can qualify for purge.

If Retention Duration Unit = Days, valid values are 1 to 366.

If Retention Duration Unit = Hours, valid values are 1 to 24.

Retention Duration Unit

If Purge By Retention Duration is selected; Retention duration unit.
 
Options:

  • Hours
  • Days

Execution User


Read-only; Execution user that has been selected (via the Assign Execution User action) to override the execution user of task instances being launched by the trigger.

Status

This section contains information about the current status of the trigger.

Status

System-defined; Specification for whether the trigger is Enabled or Disabled. The user enables and disables the trigger by clicking the Enable / Disable buttons. Only enabled triggers are processed by the Controller.

Next Scheduled Time

System-supplied; for time-based triggers. If Status = Enabled, the next date and time this trigger will be satisfied. See Displaying Trigger Forecast Information.

Enabled By

System-supplied. If Status = Enabled, ID of the user who most recently enabled this trigger.

Disabled By

System-supplied; If Status = Disabled, ID of the user who most recently disabled this trigger. (By default, all new triggers are disabled.)

Enabled Time

System-supplied. If Status = Enabled, Date and time that the trigger was enabled.

Disabled Time

System-supplied. If Status = Disabled, Date and time that the trigger was disabled.

Skip DetailsThis section contains detailed information about skipping the trigger.

Task Launch Skip Condition

User-defined; Controls when launching a task for the trigger will be skipped.

Default is the value of the Trigger Task Launch Skip Condition Default Universal Controller system property.

Options:

  • -- None --
    Do not skip the task launch.
  • Active
    Skip the task launch if a previous instance is still active.
  • Active By Trigger
    Skip the task launch if a previous instance launched by the trigger is still active.

Task Launch Skip Condition is not applicable when using the Trigger Now... command and will be ignored.

Skip Restriction

User-defined; Specification for when this trigger should skip and not launch the task(s).

Options:

  • - - None - -
    No skip restrictions
  • Before
    Trigger will skip if the current date and time is before the specified Skip Before Date and Skip Before Time values.
  • After
    Trigger will skip if the current date and time is after the specified Skip After Date and Skip After Time values.
  • Span
    Trigger will skip if the date and time qualifies based upon the specified Skip After DateSkip After Time, Skip Before Date, and Skip After Date values.

    Note

    If Skip After Date and Skip After Time are prior to the Skip Before Date and Skip Before Time, the Span is a "between" period. In this case, if the triggered time is after the Skip After Date and Skip After Time as well as before the Skip Before Date and Skip Before Time, the Trigger will skip and not launch the configured Task(s).

    If the Skip Before Date and Skip Before Time are prior to the Skip After Date and Skip After Time, the Span is a "not between" period. In this case, if the triggered time is either after the Skip After Date and Skip After Time or before the Skip Before Date and Skip Before Time, then the trigger will skip and not launch the configured Task(s).

  • On
    Trigger will skip on any of the dates specified in the Skip Date LIst.

Default is - - None - -.

Skip Count

User-defined; Allows you to specify that the Controller should skip the next N times this task is triggered.
 
Skip Count is not applicable when using the Trigger Now... command and will be ignored.

Skip Before Date

If Skip Restriction is Before or Span; Date before which the Trigger will skip.

Skip Before Time

If Skip Restriction is Before or Span; Time before which the Trigger will skip on the specified Skip Before Date.

Skip After Date

If Skip Restriction is After or Span; Date after which the Trigger will Skip.

Skip After Time

If Skip Restriction is After or Span; Time after which the Trigger will skip on the specified Skip After Date.

Skip Date List

If Skip Restriction is On;  List of dates on which the trigger will skip.

Composite Details

This section contains assorted detailed information about the trigger.

Time Limit

Amount of time (in Time Limit Units) that component events will remain in their queue before being removed.

Time Limit Unit

Unit of time specified in the Time Limit field.
 
Options:

  • Seconds
  • Minutes
  • Hours
  • Days

Queue Depth

Number of events that are maintained in the queue for each component at any time. To maintain the Queue Depth, the Controller discards the oldest events.
 
Valid values are 1 to 100 (default is 100). If Queue Depth = 1, only the most recent event from each component can be matched.

Restrictions

This section specifies any restrictions that apply to the trigger.

Restrict Times


Period during which the trigger is active. Enable this field and specify the start and end times in the Enabled Start and Enabled End fields.

Enabled Start

If Restrict Times is enabled, allows you to specify the start time of the period during which the trigger should be active. Use 24-hour time.

Enabled End

If Restrict Times is enabled, allows you to specify the end time of the period during which the trigger should be active. Use 24-hour time.

Special Restriction

Enable this field in order to specify additional parameters that tell the Controller how to handle exceptions, such as when the trigger is satisfied on a holiday or non-business day. You can specify simple and/or complex restrictions.

For example, you can specify a Simple Restriction that disables the trigger if it is satisfied on a holiday identified in the calendar and/or a Complex Restriction that disables the trigger on the last business day of every month.

Action

If Special Restriction is enabled, allows you to select an action to take on a non-business day or holiday (see Situation field).

Options:

  • Do Not Trigger
  • Next Day (run on the next day)
  • Next Business Day (run on the next business day, as defined in the calendar)
  • Previous Day (run on the previous day)
  • Previous Business Day (run on the previous business day, as defined in the calendar)

Simple Restriction

If enabled, allows you to specify an action (see Action field) such as Do Not Trigger on a non-business day or holiday (see Situation field). For example, do not trigger on a non-business day.

Situation

If Simple Restriction is enabled, allows you to select the situation that causes the system to initiate the action specified in the Action field.

Options:

  • On Non Business Day
  • On Holiday

Complex Restriction

If enabled, allows you to specify a set of parameters that determine one or more situations when this trigger should not be satisfied. Used in conjunction with the following fields: Restriction Mode, Restriction Adjective, Restriction Noun, Restriction Qualifier. For example, you may specify that you do not want to satisfy this trigger on the last business day of the year or the first day of each month.

Restriction Mode

If both Simple Restriction and Complex Restriction are enabled, specifies whether you want to use both restriction types (AND) or one or the other (OR).

Options:

  • And
  • Or

Restriction Adjective

If Complex Restriction is enabled, the type of selection.

Options:

  • Every
  • 1st
  • 2nd
  • 3rd
  • 4th
  • Last
  • Nth

Example: The last business day of the month.

Restriction Noun(s)

If Complex Restriction is enabled, the day(s) you want to select.

Options:

Example: The last Business Day and Sunday of the month.

Restriction Qualifier(s)

If Complex Restriction is enabled, the period(s) you are selecting from.

Options:

Example: The last Day of Quarter, Year, and January.

Restriction Nth Amount

If Restriction Adjective is Nth, allows you to specify the value of N.

If Restriction Qualifier is Week, Restriction Nth Amount must be <= 7.

Metadata

This section contains Metadata information about this record.

UUID

Universally Unique Identifier of this record.

Updated By

Name of the user that last updated this record.

Updated

Date and time that this record was last updated.

Created By

Name of the user that created this record.

Created

Date and time that this record was created.

Buttons

This section identifies the buttons displayed above and below the Trigger Details that let you perform various actions.

Save

Saves a new task record in the Controller database.

Save & New

Saves a new record in the Controller database and redisplays empty Details so that you can create another new record.

Save & View

Saves a new record in the Controller database and continues to display that record.

New

Displays empty (except for default values) Details for creating a new record.

Update

Saves updates to the record.

Enable

Activates this trigger and writes your User ID to the Enabled By field.

Disable

Deactivates this trigger.

Trigger Now...

Immediately triggers all the tasks specified in this trigger.
 
Optionally, you also can select to:

  • Launch the task(s) specified in the trigger with one or more variables.
  • Launch the task(s) specified in the trigger by a specified date and time.
  • Launch the task(s) specified in the trigger but place them in Held status; they will not run until they are released.


Note

If you click Trigger Now... for an Enabled trigger that does not have an assigned Execution User, the trigger will launch its task(s) under the context of the Enabled By user.
 
If you click Trigger Now... for a Disabled trigger that does not have an assigned Execution User, the trigger will launch its task(s) under the context of your user name and ID.
 
If you click Trigger Now... for an Enabled or Disabled trigger that has an assigned Execution User, the trigger will launch its task(s) under the context of the assigned Execution User.

List Component Events

For enabled triggers; Displays a new tab that lists all components of the Composite trigger and maintains a dynamic count of all events that have occurred for each component.
 

Copy

Creates a copy of this trigger, which you are prompted to rename.

Delete

Deletes the current record.

Refresh

Refreshes any dynamic data displayed in the Details.

Close

For pop-up view only; closes the pop-up view of this trigger.

Tabs

This section identifies the tabs across the top of the Trigger Details that provide access to additional information about the trigger.

Components

Allows you to define the following components:

  • Single Time Trigger component
  • One or more Task Monitor trigger components
  • One or more File Monitor trigger components
  • One or more Variable Monitor trigger components
  • One or more Email Monitor trigger components
  • One or more Universal Monitor trigger components

Variables


Lists all user-defined variables associated with this record; that is, variables that have been defined for this specific record.

Instances

Lists all task instances that were triggered directly by this trigger.

Notes


Lists all notes associated with this record.

Versions


Stores copies of all previous versions of the current record. See Record Versioning.

Time Component

 

Time Component Details Field Descriptions

The following table describes the fields and buttons that display in the Time Component Details.
 

Field Name

Description

General

This section contains general information about the component.

Name

Name used within the Controller to identify this component. It can contain a maximum of 255 alphanumerics.

Description

Description of this record. Maximum length is 255 characters.

Built-In Variable Prefix

User-specified prefix that enables built-in variables to be propagated up to the Composite trigger.

Status

This section contains information about the current status of the component.

Event Match Type

Controls whether events from the Time component will be used for a single match or multiple matches at the Composite trigger level.
 
Options:

Note

You can select Multiple only if a Time Limit is specified in the Composite Trigger Details.

Status

System-defined; Specification for whether the trigger is Enabled or Disabled. The user enables and disables the trigger by clicking the Enable / Disable buttons. Only enabled triggers are processed by the Controller.

Next Scheduled Time

System-supplied; for time-based triggers. If Status = Enabled, the next date and time this trigger will be satisfied. See Displaying Trigger Forecast Information.

Time Details

This section contains assorted detailed information about the component.

Time Style

Specifies whether this trigger is for a specific time or a series of times.

Options:

Time

Required if Time Style = Time; time of the trigger in hours and minutes, using 24-hour time. For example, 01:45 means trigger the task at 1:45 a.m.; 13:45 means trigger the task at 1:45 p.m. (See also Daylight Saving Time.)

Time Interval

Required if Time Style = Time Interval; number of Time Interval Units. For example, for a Time Interval of every three hours, specify 3 in this field and select Hours in the Time Interval Units field.

Note

See Scheduling a Time Interval, below, for information on using a Time Trigger to schedule a time interval for triggering a task.
 
Also see Time Trigger Minimum Frequency In Seconds Universal Controller system property to the define the minimum time interval that must be used.

Time Interval Units

Required if Time Style = Time Interval; Type of time interval. Used in conjunction with the Time Interval field. For example, for a Time Interval of every three hours, specify 3 in the Time Interval field and select Hours in this field.

Options:

  • Seconds
  • Minutes
  • Hours

Enable Offset

If Time Style = Time Interval, allows you to define (in the Initial Time Offset field) a starting time, in minutes offset from the hour, for the trigger to run.

Initial Time Offset (hh:mm)

If Enable Offset is selected, allows you to define a starting time, in minutes offset from the hour.

The default value ( * ) lets you select a starting hour (0 to 23) other than the next hour.

For example:

Day Details

This section contains assorted detailed information about the trigger day.

Day Style

Allows you to indicate when this trigger will be run:

Options:

Daily

If Day Style = Simple, allows you to specify that the trigger is active every day of the week.

Business Days

If Day Style = Simple, allows you to specify that the trigger is active on the business days specified in the calendar selected in the Calendar field.

Specific Day(s)

If Day Style = Simple, allows you to specify one or more specific days of the week that the trigger is active in the calendar selected in the Calendar field.

Date Adjective

If Day Style = Complex, allows you to specify which in a series of days you want to select. Used in conjunction with the Date Noun(s) and the Date Qualifier(s) fields.

For example, to specify "the 2nd Monday and Friday of January and December," select Date Adjective = Nth, Nth Amount = 2, Date Noun(s) = Monday, Friday, Date Qualifier(s) = Jan, Dec.

Options:

  • Every
  • 1st
  • 2nd
  • 3rd
  • 4th
  • Last
  • Nth

Nth Amount

If Day Adjective = Nth, allows you to specify the value of N.

Date Noun

If Day Style = Complex, allows you to specify the type of day you want to select. Used in conjunction with the Date Adjective and the Date Qualifier fields.

For example, to specify "the 15th business day of the month," select Date Adjective = Nth, Date Noun = Business Day, Date Qualifier = Month, and Nth Amount = 15.

This drop-down menu is populated as follows:

  • Sunday through Saturday
  • Day = any day
  • Business Day = The business days specified in the calendar selected in the Calendar field.
  • Any Custom Days specified in the calendar selected in the Calendar field.

Date Qualifier

If Day Style = Complex, allows you to specify the period for your selection formula. Used in conjunction with the Date Noun and Date Adjective fields.

For example, to specify "the 15th business day of the month," select Date Adjective = Nth, Date Noun = Business Day, Date Qualifier = Month, and Nth Amount = 15.

Options:

Date Adjustment

If Day Style = Complex, allows you to adjust your date setting by a less or plus number of Days or Business Days.

For example, to specify the 2nd to last day of the month (last day of the month less one day), select Date Adjective = Last, Date Noun(s) = Day, Date Qualifier(s) = Month, Data Adjustment = Less, Adjustment Amount = 1, and Adjustment Type = Day.

Options:

  • None
  • Less
  • Plus

Default is None.

Adjustment Amount

Required if Day Adjustment = Less or Plus; Allows you to specify the number of Days or Business Days to adjust your date setting. Maximum is 366. Default is 1.

Adjustment Type

If Day Adjustment = Less or Plus, allows you to specify the type of day by which to adjust your date setting.

Options:

  • Day
  • Business Day

Day Interval

If Day Style = Every, allows you to specify the interval (in days) at which this trigger will run.

Interval Start

If Day Style = Every, allows you to specify the first day of the interval on which this trigger will run.

Restrictions

This section specifies any restrictions that apply to the component.

Restrict Times

If Time Style = Time Interval; Period during which the trigger is active. Enable this field and specify the start and end times in the Enabled Start and Enabled End fields.
 
Restrict Times does not affect the start time or end time of the trigger Time Interval; it only specifies the time frame during which the trigger is active. (For additional information, see Restrict Times on the Time Trigger page.)
 

Note

Restrict Times and Enable Offset are mutually exclusive.

Enabled Start

If Restrict Times is enabled, allows you to specify the start time of the period during which the trigger should be active. Use 24-hour time.

Enabled End

If Restrict Times is enabled, allows you to specify the end time of the period during which the trigger should be active. Use 24-hour time.

Adjust Interval To Enabled Start

If Restrict Times is enabled; Specification for whether to always begin at the Enabled Start, regardless of the time interval, or to begin based on the actual interval. If Adjust Interval To Enabled Start is not selected, the start time and end time specify only the time frame/window during which the trigger is active; they do not modify the actual time interval (see Restrict Times).

Special Restriction

Enable this field in order to specify additional parameters that tell the Controller how to handle exceptions, such as when the trigger is satisfied on a holiday or non-business day. You can specify simple and/or complex restrictions.

For example, you can specify a Simple Restriction that disables the trigger if it is satisfied on a holiday identified in the calendar and/or a Complex Restriction that disables the trigger on the last business day of every month.

Simple Restriction

If enabled, allows you to specify an action (see Action field) such as Do Not Trigger on a non-business day or holiday (see Situation field). For example, do not trigger on a non-business day.

Situation

If Simple Restriction is enabled, allows you to select the situation that causes the system to initiate the action specified in the Action field.

Options:

  • On Non Business Day
  • On Holiday

Action

If Special Restriction is enabled, allows you to select an action to take on a non-business day or holiday (see Situation field).

Options:

  • Do Not Trigger
  • Next Day (run on the next day)
  • Next Business Day (run on the next business day, as defined in the calendar)
  • Previous Day (run on the previous day)
  • Previous Business Day (run on the previous business day, as defined in the calendar)

Complex Restriction

If enabled, allows you to specify a set of parameters that determine one or more situations when this trigger should not be satisfied. Used in conjunction with the following fields: Restriction Mode, Restriction Adjective, Restriction Noun, Restriction Qualifier. For example, you may specify that you do not want to satisfy this trigger on the last business day of the year or the first day of each month.

Restriction Mode

If both Simple Restriction and Complex Restriction are enabled, specifies whether you want to use both restriction types (AND) or one or the other (OR).

Options:

  • And
  • Or

Restriction Adjective

If Complex Restriction is enabled, the type of selection.

Options:

  • Every
  • 1st
  • 2nd
  • 3rd
  • 4th
  • Last
  • Nth

Example: The last business day of the month.

Restriction Noun(s)

If Complex Restriction is enabled, the day(s) you want to select.

Options:

Example: The last Business Day and Sunday of the month.

Restriction Qualifier(s)

If Complex Restriction is enabled, the period(s) you are selecting from.

Options:

Example: The last Day of Quarter, Year, and January.

Restriction Nth Amount

If Restriction Adjective is Nth, allows you to specify the value of N.

If Restriction Qualifier is Week, Restriction Nth Amount must be <= 7.

Metadata

This section contains Metadata information about this record.

UUID

Universally Unique Identifier of this record.

Updated By

Name of the user that last updated this record.

Updated

Date and time that this record was last updated.

Created By

Name of the user that created this record.

Created

Date and time that this record was created.

Buttons

This section identifies the buttons displayed above and below the Component Details that let you perform various actions.

Save

Saves a new record in the Controller database.

Save & View

Saves a new record in the Controller database and continues to display that record.

Update

Saves updates to the record.

List Qualifying Times

Lets you generate a list of future dates and times that the trigger will trigger the specified task (see Generating a List of Qualifying Times, below).

Delete

Deletes the current record.

Refresh

Refreshes any dynamic data displayed in the Details.

Close

For pop-up view only; closes the pop-up view of this component.


Agent File Monitor Component

 

Agent File Monitor Component Details Field Descriptions

The following table describes the fields and buttons that display in the Agent File Monitor Component Details.
 

Field Name

Description

General

This section contains general information about the component.

Name

Name used within the Controller to identify this component. It can contain a maximum of 255 alphanumerics.

Description

Description of this record. Maximum length is 255 characters.

Built-In Variable Prefix

User-specified prefix that enables built-in variables in the file(s) being monitored to be propagated up to the Composite trigger.

Status

This section contains information about the current status of the component.

Status

System-defined; Specification for whether the trigger is Enabled or Disabled. The user enables and disables the trigger by clicking the Enable / Disable buttons. Only enabled triggers are processed by the Controller.

Monitor Status

System-supplied; Lists the status of Agent File Monitor tasks currently running that were launched by this trigger.

Agent File Monitor Details

This section contains assorted detailed information about the component.

Agent File Monitor

Required; Agent File Monitor task being executed. Enter a task name, select a task from the drop-down list, or click the Task Details icon to create a new task. If a task already is specified in this field, click the Task Details icon to view the Details of that task.

Running Monitor

System-supplied; Name of the currently running task instance of the specified Agent File Monitor task that was launched by this enabled trigger.

Restrictions

This section specifies any restrictions that apply to the component.

Restrict Times

Period during which the component is active. Enable this field and specify the start and end times in the Enabled Start and Enabled End fields.

Enabled Start

If Restrict Times is enabled, allows you to specify the start time of the period during which the component should be active. Use 24-hour time.

Enabled End

If Restrict Times is enabled, allows you to specify the end time of the period during which the component should be active. Use 24-hour time.

Special Restriction

Enable this field in order to specify additional parameters that tell the Controller how to handle exceptions, such as when the component is satisfied on a holiday or non-business day. You can specify simple and/or complex restrictions. For example, you can specify a Simple Restriction that disables the component if it is satisfied on a holiday identified in the calendar and/or a Complex Restriction that disables the component on the last business day of every month.

Simple Restriction

If enabled, allows you to specify an action (see Action field) such as Do Not Trigger on a non-business day or holiday (see Situation field). For example, do not trigger on a non-business day.

Situation

If Simple Restriction is enabled, allows you to select the situation that causes the system to initiate the action specified in the Action field.

Options:

  • On Non Business Day
  • On Holiday

Action

If Special Restriction is enabled, allows you to select an action to take on a non-business day or holiday (see Situation field).

Options:

  • Do Not Trigger
  • Next Day (run on the next day)
  • Next Business Day (run on the next business day, as defined in the calendar)
  • Previous Day (run on the previous day)
  • Previous Business Day (run on the previous business day, as defined in the calendar)

Complex Restriction

If enabled, allows you to specify a set of parameters that determine one or more situations when this component should not be satisfied. Used in conjunction with the following fields: Restriction Mode, Restriction Adjective, Restriction Noun, Restriction Qualifier. For example, you may specify that you do not want to satisfy this component on the last business day of the year or the first day of each month.

Restriction Mode

If both Simple Restriction and Complex Restriction are enabled, specifies whether you want to use both restriction types (AND) or one or the other (OR).

Options:

  • And
  • Or

Restriction Adjective

If Complex Restriction is enabled, the type of selection.

Options:

  • Every
  • 1st
  • 2nd
  • 3rd
  • 4th
  • Last
  • Nth

Example: The last business day of the month.

Restriction Noun(s)

If Complex Restriction is enabled, the day(s) you want to select.

Options:

Example: The last Business Day and Sunday of the month.

Restriction Qualifier(s)

If Complex Restriction is enabled, the period(s) you are selecting from.

Options:

Example: The last Day of Quarter, Year, and January.

Restriction Nth Amount

If Restriction Adjective is Nth, allows you to specify the value of N.

If Restriction Qualifier is Week, Restriction Nth Amount must be <= 7.

Metadata

This section contains Metadata information about this record.

UUID

Universally Unique Identifier of this record.

Updated By

Name of the user that last updated this record.

Updated

Date and time that this record was last updated.

Created By

Name of the user that created this record.

Created

Date and time that this record was created.

Buttons

This section identifies the buttons displayed above and below the Component Details that let you perform various actions.

Save

Saves a new record in the Controller database.

Save & New

Saves a new record in the Controller database and redisplays empty Details so that you can create another new record.

Save & View

Saves a new record in the Controller database and continues to display that record.

Update

Saves updates to the record.

Delete

Deletes the current record.

Refresh

Refreshes any dynamic data displayed in the Details.

Close

For pop-up view only; closes the pop-up view of this component.

Task Monitor Component

 

Task Monitor Component Details Field Descriptions

The following table describes the fields and buttons that display in the Task Monitor Component Details.
 

Field Name

Description

General

This section contains general information about the component.

Name

Name used within the Controller to identify this component. It can contain a maximum of 255 alphanumerics.

Description

Description of this record. Maximum length is 255 characters.

Built-In Variable Prefix

User-specified prefix that enables built-in variables in the task(s) being monitored to be propagated up to the Composite trigger.

Status

This section contains information about the current status of the trigger.

Status

System-defined; Specification for whether the trigger is Enabled or Disabled. The user enables and disables the trigger by clicking the Enable / Disable buttons. Only enabled triggers are processed by the Controller.

Monitor Status

System-supplied; Lists the status of Task Monitor tasks currently running that were launched by this trigger.

Task Monitor Details

This section contains assorted detailed information about the component.

Task Monitor

Required; Task Monitor task being executed. Enter a task name, select a task from the drop-down list, or click the Task Details icon to create a new task. If a task already is specified in this field, click the Task Details icon to view the Details of that task.

Running Monitor

System-supplied; Name of the currently running task instance of the specified Task Monitor task that was launched by this enabled trigger.

Restrictions

This section specifies any restrictions that apply to the component.

Restrict Times

Period during which the component is active. Enable this field and specify the start and end times in the Enabled Start and Enabled End fields.

Enabled Start

If Restrict Times is enabled, allows you to specify the start time of the period during which the component should be active. Use 24-hour time.

Enabled End

If Restrict Times is enabled, allows you to specify the end time of the period during which the component should be active. Use 24-hour time.

Special Restriction

Enable this field in order to specify additional parameters that tell the Controller how to handle exceptions, such as when the component is satisfied on a holiday or non-business day. You can specify simple and/or complex restrictions. For example, you can specify a Simple Restriction that disables the component if it is satisfied on a holiday identified in the calendar and/or a Complex Restriction that disables the component on the last business day of every month.

Simple Restriction

If enabled, allows you to specify an action (see Action field) such as Do Not Trigger on a non-business day or holiday (see Situation field). For example, do not trigger on a non-business day.

Situation

If Simple Restriction is enabled, allows you to select the situation that causes the system to initiate the action specified in the Action field.

Options:

  • On Non Business Day
  • On Holiday

Action

If Special Restriction is enabled, allows you to select an action to take on a non-business day or holiday (see Situation field).

Options:

  • Do Not Trigger
  • Next Day (run on the next day)
  • Next Business Day (run on the next business day, as defined in the calendar)
  • Previous Day (run on the previous day)
  • Previous Business Day (run on the previous business day, as defined in the calendar)

Complex Restriction

If enabled, allows you to specify a set of parameters that determine one or more situations when this component should not be satisfied. Used in conjunction with the following fields: Restriction Mode, Restriction Adjective, Restriction Noun, Restriction Qualifier. For example, you may specify that you do not want to satisfy this component on the last business day of the year or the first day of each month.

Restriction Mode

If both Simple Restriction and Complex Restriction are enabled, specifies whether you want to use both restriction types (AND) or one or the other (OR).

Options:

  • And
  • Or

Restriction Adjective

If Complex Restriction is enabled, the type of selection.

Options:

  • Every
  • 1st
  • 2nd
  • 3rd
  • 4th
  • Last
  • Nth

Example: The last business day of the month.

Restriction Noun(s)

If Complex Restriction is enabled, the day(s) you want to select.

Options:

Example: The last Business Day and Sunday of the month.

Restriction Qualifier(s)

If Complex Restriction is enabled, the period(s) you are selecting from.

Options:

Example: The last Day of Quarter, Year, and January.

Restriction Nth Amount

If Restriction Adjective is Nth, allows you to specify the value of N.

If Restriction Qualifier is Week, Restriction Nth Amount must be <= 7.

Metadata

This section contains Metadata information about this record.

UUID

Universally Unique Identifier of this record.

Updated By

Name of the user that last updated this record.

Updated

Date and time that this record was last updated.

Created By

Name of the user that created this record.

Created

Date and time that this record was created.

Buttons

This section identifies the buttons displayed above and below the Component Details that let you perform various actions.

Save

Saves a new record in the Controller database.

Save & New

Saves a new record in the Controller database and redisplays empty Details so that you can create another new record.

Save & View

Saves a new record in the Controller database and continues to display that record.

Update

Saves updates to the record.

Delete

Deletes the current record.

Refresh

Refreshes any dynamic data displayed in the Details.

Close

For pop-up view only; closes the pop-up view of this component.

Variable Monitor Component


Variable Monitor Component Details Field Descriptions

The following table describes the fields and buttons that display in the Variable Monitor Component Details.
 

Field Name

Description

General

This section contains general information about the component.

Name

Name used within the Controller to identify this component. It can contain a maximum of 255 alphanumerics.

Description

Description of this record. Maximum length is 255 characters.

Built-In Variable Prefix

User-specified prefix that enables built-in variables in the task(s) being monitored to be propagated up to the Composite trigger.

Status

This section contains information about the current status of the trigger.

Status

System-defined; Specification for whether the trigger is Enabled or Disabled. The user enables and disables the trigger by clicking the Enable / Disable buttons. Only enabled triggers are processed by the Controller.

Monitor Status

System-supplied; Lists the status of Variable Monitor tasks currently running that were launched by this trigger.

Variable Monitor Details

This section contains assorted detailed information about the component.

Variable Monitor

Required; Variable Monitor task being executed. Enter a task name, select a task from the drop-down list, or click the Task Details icon to create a new task. If a task already is specified in this field, click the Task Details icon to view the Details of that task.

Note

If you click the Details icon to create or update a Variable Monitor, Change is pre-selected for the Variable Monitor Type field and cannot be changed.

Running Monitor

System-supplied; Name of the currently running task instance of the specified Variable Monitor task that was launched by this enabled trigger.

Restrictions

This section specifies any restrictions that apply to the component.

Restrict Times

Period during which the component is active. Enable this field and specify the start and end times in the Enabled Start and Enabled End fields.

Enabled Start

If Restrict Times is enabled, allows you to specify the start time of the period during which the component should be active. Use 24-hour time.

Enabled End

If Restrict Times is enabled, allows you to specify the end time of the period during which the component should be active. Use 24-hour time.

Special Restriction

Enable this field in order to specify additional parameters that tell the Controller how to handle exceptions, such as when the component is satisfied on a holiday or non-business day. You can specify simple and/or complex restrictions. For example, you can specify a Simple Restriction that disables the component if it is satisfied on a holiday identified in the calendar and/or a Complex Restriction that disables the component on the last business day of every month.

Simple Restriction

If enabled, allows you to specify an action (see Action field) such as Do Not Trigger on a non-business day or holiday (see Situation field). For example, do not trigger on a non-business day.

Situation

If Simple Restriction is enabled, allows you to select the situation that causes the system to initiate the action specified in the Action field.

Options:

  • On Non Business Day
  • On Holiday

Action

If Special Restriction is enabled, allows you to select an action to take on a non-business day or holiday (see Situation field).

Options:

  • Do Not Trigger
  • Next Day (run on the next day)
  • Next Business Day (run on the next business day, as defined in the calendar)
  • Previous Day (run on the previous day)
  • Previous Business Day (run on the previous business day, as defined in the calendar)

Complex Restriction

If enabled, allows you to specify a set of parameters that determine one or more situations when this component should not be satisfied. Used in conjunction with the following fields: Restriction Mode, Restriction Adjective, Restriction Noun, Restriction Qualifier. For example, you may specify that you do not want to satisfy this component on the last business day of the year or the first day of each month.

Restriction Mode

If both Simple Restriction and Complex Restriction are enabled, specifies whether you want to use both restriction types (AND) or one or the other (OR).

Options:

  • And
  • Or

Restriction Adjective

If Complex Restriction is enabled, the type of selection.

Options:

  • Every
  • 1st
  • 2nd
  • 3rd
  • 4th
  • Last
  • Nth

Example: The last business day of the month.

Restriction Noun(s)

If Complex Restriction is enabled, the day(s) you want to select.

Options:

Example: The last Business Day and Sunday of the month.

Restriction Qualifier(s)

If Complex Restriction is enabled, the period(s) you are selecting from.

Options:

Example: The last Day of Quarter, Year, and January.

Restriction Nth Amount

If Restriction Adjective is Nth, allows you to specify the value of N.

If Restriction Qualifier is Week, Restriction Nth Amount must be <= 7.

Metadata

This section contains Metadata information about this record.

UUID

Universally Unique Identifier of this record.

Updated By

Name of the user that last updated this record.

Updated

Date and time that this record was last updated.

Created By

Name of the user that created this record.

Created

Date and time that this record was created.

Buttons

This section identifies the buttons displayed above and below the Component Details that let you perform various actions.

Save

Saves a new record in the Controller database.

Save & New

Saves a new record in the Controller database and redisplays empty Details so that you can create another new record.

Save & View

Saves a new record in the Controller database and continues to display that record.

Update

Saves updates to the record.

Delete

Deletes the current record.

Refresh

Refreshes any dynamic data displayed in the Details.

Close

For pop-up view only; closes the pop-up view of this component.

Email Monitor Component


Email Monitor Component Details Field Descriptions

The following table describes the fields and buttons that display in the Email Monitor Component Details.
 

Field Name

Description

General

This section contains general information about the component.

Name

Name used within the Controller to identify this component. It can contain a maximum of 255 alphanumerics.

Description

Description of this record. Maximum length is 255 characters.

Built-In Variable Prefix

User-specified prefix that enables built-in variables in the task(s) being monitored to be propagated up to the Composite trigger.

Status

This section contains information about the current status of the trigger.

Status

System-defined; Specification for whether the trigger is Enabled or Disabled. The user enables and disables the trigger by clicking the Enable / Disable buttons. Only enabled triggers are processed by the Controller.

Monitor Status

System-supplied; Lists the status of Email Monitor tasks currently running that were launched by this trigger.

Email Monitor Details

This section contains assorted detailed information about the component.

Email Monitor

Required; Email Monitor task being executed. Enter a task name, select a task from the drop-down list, or click the Task Details icon to create a new task. If a task already is specified in this field, click the Task Details icon to view the Details of that task.

Note

If you click the Details icon to create or update an Email Monitor, Change is pre-selected for the Email Monitor Type field and cannot be changed.

Running Monitor

System-supplied; Name of the currently running task instance of the specified Email Monitor task that was launched by this enabled trigger.

Restrictions

This section specifies any restrictions that apply to the component.

Restrict Times

Period during which the component is active. Enable this field and specify the start and end times in the Enabled Start and Enabled End fields.

Enabled Start

If Restrict Times is enabled, allows you to specify the start time of the period during which the component should be active. Use 24-hour time.

Enabled End

If Restrict Times is enabled, allows you to specify the end time of the period during which the component should be active. Use 24-hour time.

Special Restriction

Enable this field in order to specify additional parameters that tell the Controller how to handle exceptions, such as when the component is satisfied on a holiday or non-business day. You can specify simple and/or complex restrictions. For example, you can specify a Simple Restriction that disables the component if it is satisfied on a holiday identified in the calendar and/or a Complex Restriction that disables the component on the last business day of every month.

Simple Restriction

If enabled, allows you to specify an action (see Action field) such as Do Not Trigger on a non-business day or holiday (see Situation field). For example, do not trigger on a non-business day.

Situation

If Simple Restriction is enabled, allows you to select the situation that causes the system to initiate the action specified in the Action field.

Options:

  • On Non Business Day
  • On Holiday

Action

If Special Restriction is enabled, allows you to select an action to take on a non-business day or holiday (see Situation field).

Options:

  • Do Not Trigger
  • Next Day (run on the next day)
  • Next Business Day (run on the next business day, as defined in the calendar)
  • Previous Day (run on the previous day)
  • Previous Business Day (run on the previous business day, as defined in the calendar)

Complex Restriction

If enabled, allows you to specify a set of parameters that determine one or more situations when this component should not be satisfied. Used in conjunction with the following fields: Restriction Mode, Restriction Adjective, Restriction Noun, Restriction Qualifier. For example, you may specify that you do not want to satisfy this component on the last business day of the year or the first day of each month.

Restriction Mode

If both Simple Restriction and Complex Restriction are enabled, specifies whether you want to use both restriction types (AND) or one or the other (OR).

Options:

  • And
  • Or

Restriction Adjective

If Complex Restriction is enabled, the type of selection.

Options:

  • Every
  • 1st
  • 2nd
  • 3rd
  • 4th
  • Last
  • Nth

Example: The last business day of the month.

Restriction Noun(s)

If Complex Restriction is enabled, the day(s) you want to select.

Options:

Example: The last Business Day and Sunday of the month.

Restriction Qualifier(s)

If Complex Restriction is enabled, the period(s) you are selecting from.

Options:

Example: The last Day of Quarter, Year, and January.

Restriction Nth Amount

If Restriction Adjective is Nth, allows you to specify the value of N.

If Restriction Qualifier is Week, Restriction Nth Amount must be <= 7.

Metadata

This section contains Metadata information about this record.

UUID

Universally Unique Identifier of this record.

Updated By

Name of the user that last updated this record.

Updated

Date and time that this record was last updated.

Created By

Name of the user that created this record.

Created

Date and time that this record was created.

Buttons

This section identifies the buttons displayed above and below the Component Details that let you perform various actions.

Save

Saves a new record in the Controller database.

Save & New

Saves a new record in the Controller database and redisplays empty Details so that you can create another new record.

Save & View

Saves a new record in the Controller database and continues to display that record.

Update

Saves updates to the record.

Delete

Deletes the current record.

Refresh

Refreshes any dynamic data displayed in the Details.

Close

For pop-up view only; closes the pop-up view of this component.

Universal Monitor Component


Universal Monitor Component Details Field Descriptions

The following table describes the fields and buttons that display in the Universal Monitor Component Details.
 

Field Name

Description

General

This section contains general information about the component.

Name

Name used within the Controller to identify this component. It can contain a maximum of 255 alphanumerics.

Description

Description of this record. Maximum length is 255 characters.

Built-In Variable Prefix

User-specified prefix that enables built-in variables in the task(s) being monitored to be propagated up to the Composite trigger.

Status

This section contains information about the current status of the trigger.

Status

System-defined; Specification for whether the trigger is Enabled or Disabled. The user enables and disables the trigger by clicking the Enable / Disable buttons. Only enabled triggers are processed by the Controller.

Monitor Status

System-supplied; Lists the status of Universal Monitor tasks currently running that were launched by this trigger.

Universal Monitor Details

This section contains assorted detailed information about the component.

Universal Monitor

Required; Universal Monitor task being executed. Enter a task name, select a task from the drop-down list, or click the Task Details icon to create a new task. If a task already is specified in this field, click the Task Details icon to view the Details of that task.

Note

If you click the Details icon to create or update a Universal Monitor, Change is pre-selected for the Universal Monitor Type field and cannot be changed.

Running Monitor

System-supplied; Name of the currently running task instance of the specified Universal Monitor task that was launched by this enabled trigger.

Restrictions

This section specifies any restrictions that apply to the component.

Restrict Times

Period during which the component is active. Enable this field and specify the start and end times in the Enabled Start and Enabled End fields.

Enabled Start

If Restrict Times is enabled, allows you to specify the start time of the period during which the component should be active. Use 24-hour time.

Enabled End

If Restrict Times is enabled, allows you to specify the end time of the period during which the component should be active. Use 24-hour time.

Special Restriction

Enable this field in order to specify additional parameters that tell the Controller how to handle exceptions, such as when the component is satisfied on a holiday or non-business day. You can specify simple and/or complex restrictions. For example, you can specify a Simple Restriction that disables the component if it is satisfied on a holiday identified in the calendar and/or a Complex Restriction that disables the component on the last business day of every month.

Simple Restriction

If enabled, allows you to specify an action (see Action field) such as Do Not Trigger on a non-business day or holiday (see Situation field). For example, do not trigger on a non-business day.

Situation

If Simple Restriction is enabled, allows you to select the situation that causes the system to initiate the action specified in the Action field.

Options:

  • On Non Business Day
  • On Holiday

Action

If Special Restriction is enabled, allows you to select an action to take on a non-business day or holiday (see Situation field).

Options:

  • Do Not Trigger
  • Next Day (run on the next day)
  • Next Business Day (run on the next business day, as defined in the calendar)
  • Previous Day (run on the previous day)
  • Previous Business Day (run on the previous business day, as defined in the calendar)

Complex Restriction

If enabled, allows you to specify a set of parameters that determine one or more situations when this component should not be satisfied. Used in conjunction with the following fields: Restriction Mode, Restriction Adjective, Restriction Noun, Restriction Qualifier. For example, you may specify that you do not want to satisfy this component on the last business day of the year or the first day of each month.

Restriction Mode

If both Simple Restriction and Complex Restriction are enabled, specifies whether you want to use both restriction types (AND) or one or the other (OR).

Options:

  • And
  • Or

Restriction Adjective

If Complex Restriction is enabled, the type of selection.

Options:

  • Every
  • 1st
  • 2nd
  • 3rd
  • 4th
  • Last
  • Nth

Example: The last business day of the month.

Restriction Noun(s)