Built-In Variables

Overview

Built-in variables are maintained by Universal Controller and provide information about task instances, agents, Universal Message Service (OMS), and cluster nodes. They can be used in free text fields in triggers, tasks, task actions, and email notifications for agents, OMS servers, and cluster nodes.

Supported built-in variables and their descriptions are provided below. All built-in variables are prefixed with ops_.

Built-In Variable Categories

Built-in variables are listed alphabetically within the following categories on this page:

  • Agent Variables
  • Agent-Based Task Instance Variables
  • Agent Cluster Variables
  • Agent File Monitor Task Instance/Trigger Variables
  • Application Monitor Trigger Variables
  • Cluster Node Variables
  • Common Variables
  • Composite Trigger Variables
  • Email Monitor Task Instance/Trigger Variables
  • File Transfer Task Instance Variables
  • OMS Server Variables
  • PeopleSoft Task Instance Variables
  • Recurring Task Instance Variables
  • Remote File Monitor Task Instance Variables
  • SAP Task Instance Variables
  • SQL and Stored Procedure Task Instance Variables
  • SQL Task Instance Variables
  • Stored Procedure Task Instance Variables
  • System Monitor Task Instance Variables
  • Task Instance Variables
  • Task Monitor Task Instance/Trigger Variables
  • Trigger Variables
  • Universal Monitor Task Instance/Trigger and Universal Event Variables
  • Variable Monitor Task Instance/Trigger Variables
  • Web Service Task Instance Variables
  • Webhook Variables
  • z/OS Task Instance Variables

Agent Variables

The following agent variables can be used to pass information into an Agent notification.

Agent Hostname

Description

Resolves to the agent hostname.

Syntax

${ops_agent_hostname}

Example


Agent IP Address

Description

Resolves to the agent IP address (see ${ops_agent_ip}, below.

Syntax

${ops_agent_ipaddr}

Example


Agent IP Address

Description

Resolves to the agent IP address.

Syntax

${ops_agent_ip}

Example


Agent Mode

Description

Resolves to the agent operational mode (Active, Offline).

Syntax

${ops_agent_mode}

Example


Agent Name

Description

Resolves to the agent name.

Syntax

${ops_agent_name}

Example


Agent Queue Name

Description

Resolves to the agent queue name.
 

Note

In the user interface, the queue name is labelled Agent Id.

Syntax

${ops_agent_id}

Example


Note

Although they have the same syntax, ${ops_agent_id}, this Built-In Variables#Agent Queue Name Agent variable resolves to a different value than the Built-In Variables#Agent sys_id Agent-based task instance variable.

Agent-Based Task Instance Variables

The following variables can be used to pass agent information into agent-based task (Windows, Linux/Unix, z/OS, and SAP) notifications; see Creating Email Notifications and Creating SNMP Notifications.

Agent Hostname

Description

Resolves to the agent hostname.

Syntax

${ops_agent_hostname}

Example


Agent IP Address

Description

Resolves to the agent IP address (see ${ops_agent_ip}, below.

Syntax

${ops_agent_ipaddr}

Example


Agent IP Address

Description

Resolves to the agent IP address.

Syntax

${ops_agent_ip}

Example


Agent Name

Description

Resolves to the agent name.

Syntax

${ops_agent_name}

Example


Agent sys_id

Description

Resolves to the sys_id of the agent.

Syntax

${ops_agent_id}

Example


Note

Although they have the same syntax, ${ops_agent_id}, this Built-In Variables#Agent sys_id Agent-based task instance variable resolves to a different value than the Built-In Variables#Agent Queue Name Agent variable.

Agent Queue Name

Description

Resolves to the agent queue name.
 

Note

In the user interface, the queue name is labelled Agent Id.

Syntax

${ops_agent_queue_name}

Example


Agent Cluster Variables

The following agent cluster variables can be used to pass information into an Agent Cluster notification.

Agent Cluster Name

Description

Resolves to the agent cluster name.

Syntax

${ops_agent_cluster_name}

Example


Agent Cluster Distribution

Description

Resolves to the Distribution type for the agent cluster.

Syntax

${ops_agent_cluster_distribution}

Example


Agent Cluster Task Execution Limit

Description

Resolves to the type of Task Execution Limit for the agent cluster.

Syntax

${ops_agent_cluster_limit_type}

Example


Agent Cluster Suspended

Description

Resolves to the current suspension status of the agent cluster.

Syntax

${ops_agent_cluster_suspended}

Example


Agent Cluster Task Execution Limit Amount

Description

Resolves to the maximum number of tasks that can be running at the same time by Agents in this agent cluster.

Syntax

${ops_agent_cluster_limit_max}

Example


Agent Cluster Task Execution Current Limit

Description

Resolves to the current number of tasks currently being run by the Agents in this agent cluster.

Syntax

${ops_agent_cluster_limit_current}

Example


Agent Cluster Network Alias

Description

Resolves to the Network Alias of this agent cluster.

Syntax

${ops_agent_cluster_network_alias}

Example


Agent Cluster Network Alias Port

Description

Resolves to the Agent Port of this agent cluster.

Syntax

${ops_agent_cluster_network_alias_port}

Example


Agent Cluster Notification State

Description

Resolves to the Notification State for which the notification matched.

Syntax

${ops_agent_cluster_notification_state}

Example



Agent File Monitor Task Instance / Trigger Variables

When one or more tasks are launched by a Agent File Monitor trigger after the conditions in its associated Agent File Monitor task are met, the built-in variables described below are passed into the tasks being launched by the trigger.

For example, the Agent File Monitor trigger may specify the launch of a Windows task each time the associated Agent File Monitor task detects the creation of a specific file. The Windows task might use one of these built-in variables as a command argument. Or, if the Agent File Monitor task is not associated with a trigger but is running within a workflow, on completion you can propagate one or more of these built-in variable values to the parent workflow level using the Set Variable action. This allows you to pass information from the Agent File Monitor task to a successor task within the same workflow hierarchy.

Base File Name

Description

Resolves to the base file name.

Syntax

${ops_trigger_file_name_simple}

File Directory

Description

Resolves to the directory where the new file was created, but not the file itself. If the existence or non-existence of the final directory separator is a requirement, we recommend the use of ${ops_trigger_file_fullpath} and ${ops_trigger_file_fullpath_no_separator}, respectively.

Syntax

${ops_trigger_file_path}

Example


File Directory (with Final Directory Separator)

Description

Resolves to the directory where the new file was created, but not the file itself; includes the final directory separator.

Syntax

${ops_trigger_file_fullpath}

Example


File Directory (without Final Directory Separator)

Description

Resolves to the directory where the new file was created, but not the file itself; does not include the final directory separator.

Syntax

${ops_trigger_file_fullpath_no_separator}

Example


File Extension

Description

Resolves to the file extension of a file.

Syntax

${ops_trigger_file_name_extension}

Example


Separator

Description

Resolves to the separator appropriate to the platform where the agent is running. For Windows, resolves to a backslash ( \ ); for Linux/Unix, resolves to forward slash ( / ). This variable may be useful if you want to piece together a pathname using a combination of text and variables.

Syntax

${ops_trigger_file_separator}

Example

Trigger File Date

Description

Resolves to the file date of the file that fired the trigger.

Syntax

${ops_trigger_file_date}

Example


Trigger File Group

Description

Resolves to the file group of the file that fired the trigger.

Syntax

${ops_trigger_file_group}

Example


Trigger File Name

Description

Resolves to the name of the file that fired the trigger.

Syntax

${ops_trigger_file_name}

Example


Trigger File Name (No Path)

Description

Resolves to the name of the file that fired the trigger, but without any path information.

Syntax

${ops_trigger_file_name_nopath}

Example


Trigger File Owner

Description

Resolves to the file owner of the file that fired the trigger.

Syntax

${ops_trigger_file_owner}

Example


Trigger File Scan Result

Description

Resolves to the result of the file scan: FOUND or NOT_FOUND.

Syntax

${ops_trigger_file_scan}

Example


Trigger File Size

Description

Resolves to the file size of the file that fired the trigger.

Syntax

${ops_trigger_file_size}

Example


Application Monitor Trigger Variables

When a task is launched by an Application Monitor trigger, the following built-in variables are passed into the task being launched by the trigger:

Trigger Application Name

Description

Resolves to the name of the Application being monitored by the trigger.

Syntax

${ops_trigger_appl_name}

Example


Trigger Application Status

Description

Resolves to the status of the Application being monitored by the trigger.

Syntax

${ops_trigger_appl_status}

Example


Trigger Application sys_id

Description

Resolves to the sys_id of the application.

Syntax

${ops_trigger_appl_id}

Example


Trigger Application Type

Description

Resolves to the type of Application being monitored by the trigger, as defined by the Application Type field.

Syntax

${ops_trigger_appl_type}

Example


Cluster Node Variables

The following cluster node variables allow you to pass information into a cluster node (Controller server) notification:

Cluster Node Hostname

Description

Resolves to the hostname of this cluster node.

Syntax

${ops_cluster_hostname}

Example

Cluster Node ID

Description

Resolves to the cluster node's internally-generated build ID.

Syntax

${ops_cluster_id}

Example

Cluster Node IP Address

Description

Resolves to the IP address of this cluster node.

Syntax

${ops_cluster_ipaddr}

Example

Cluster Node Mode

Description

Resolves to the current mode of this cluster node: Offline, Active, Passive.
 
For more information, see Viewing Node Status.

Syntax

${ops_cluster_mode}

Example

Cluster Node Name

Description

${ops_cluster_name} is an alias for the ${ops_cluster_id} variable.

Syntax

${ops_cluster_name}

Example

Cluster Node Running Time

Description

Resolves to the numbers of days, hours, and minutes that this cluster node has been running since it was last started.

Syntax

${ops_cluster_uptime}

Example

Cluster Node Start Time

Description

Resolves to the date and time the cluster node (server) was started.

Syntax

${ops_cluster_start_time}

Example

Common Variables

The following variable is available for Task Instances, Agents, OMS Servers, and Cluster Nodes.

System Identifier

Description

Resolves to the value of the System Identifier Universal Controller system property.

Syntax

${ops_system_identifier}

Example


Composite Trigger Variables

The following built-in variable is associated with the Composite Trigger type. This variable is only available for Composite Trigger components that have a Built-in Variable Prefix specified.

Trigger Component Event Time

Description

Resolves to the time when a Composite Trigger component fired.

Syntax

${<prefix>_trigger_component_event_time}

Example


Email Monitor Task Instance/Trigger Variables

When one or more tasks are launched by an Email Monitor trigger after the conditions in its associated Email Monitor task are met, the built-in variables described below are passed into the tasks being launched by the trigger.

For example, the Email Monitor trigger may specify the launch of an Email task each time the associated Email Monitor task detects the status in a Mailbox folder. The Windows task might use one of these built-in variables as a command argument. Or, if the Agent File Monitor task is not associated with a trigger but is running within a workflow, on completion you can propagate one or more of these built-in variable values to the parent workflow level using the Set Variable action. This allows you to pass information from the Email Monitor task to a successor task within the same workflow hierarchy.

Body Field

Description

Resolves to the Body field of the Email.

Syntax

${ops_trigger_email_body}

Example


Cc Field

Description

Resolves to the Cc field of the Email.

Syntax

${ops_trigger_email_cc}

Example


From Field

Description

Resolves to the From field of the Email.

Syntax

${ops_trigger_email_from}

Example


HTML Body Field

Description

Resolves to the HTML Body field of the Email.

Syntax

${ops_trigger_email_body_html}

Example


Received Date Field

Description

Resolves to the Received Date field of the Email.

Syntax

${ops_trigger_email_received_date}

Example


Reply To Field

Description

Resolves to the Reply-To field of the Email.

Syntax

${ops_trigger_email_reply_to}

Example


Sent Date Field

Description

Resolves to the Sent Date field of the Email.

Syntax

${ops_trigger_email_sent_date}

Example


Subject Field

Description

Resolves to the Subject field of the Email.

Syntax

${ops_trigger_email_subject}

Example


To Field

Description

Resolves to the To field of the Email.

Syntax

${ops_trigger_email_to}

Example



File Transfer Task Instance Variables

For UDM Scripts

These File Transfer variables are available for use in UDM scripts.

The Source and Destination variables are the legacy variables.  The Primary and Secondary variables are new for Universal Controller 7.0.0.0.

A UDM Script using the legacy variables will continue to work; those variables will be replaced with the new ones before the script is sent to the Agent. 

Note

These variables differ from all other built-in variables in that they are resolved by Universal Data Mover (UDM) on a UDM agent, not by the Universal Controller. File Transfer variables are sent to an agent unresolved and UDM performs all resolution for them. The resolved value is never available to the Controller.

Unlike the syntax of built-in variables resolved by Universal Controller - ${<variable-name>} - the syntax of File Transfer variables is the same as all UDM variables - $(<variable-name>).

The following example illustrates the correct way to code them:
 

Source and Destination Variables

Primary and Secondary Variables

Source Password

Description

Resolves to the source password.

Syntax

$(ops_src_cred_pwd)

Example


Source User ID

Description

Resolves to the source user ID.

Syntax

$(ops_src_cred_user)

Example


Destination Password

Description

Resolves to the destination password.

Syntax

$(ops_dst_cred_pwd)

Example


Destination User ID

Description

Resolves to the destination user ID.

Syntax

$(ops_dst_cred_user)

Example


Primary Password

Description

Resolves to the Primary password.

Syntax

$(ops_primary_cred_pwd)

Example


Primary User ID

Description

Resolves to the Primary user ID.

Syntax

$(ops_primary_cred_user)

Example


Secondary Password

Description

Resolves to the Secondary password.

Syntax

$(ops_secondary_cred_pwd)

Example


Secondary User ID

Description

Resolves to the Secondary user ID.

Syntax

$(ops_secondary_cred_user)

Example


For Transfer Protocol = UDM

Primary File Name

Description

Resolves to the Primary File(s) field values.

If the Primary File(s) field is empty, it resolves to empty string/blank.

Syntax

$(ops_primary_filename)

$(ops_primary_filename) is an alias for $(ops_local_filename).

Example


Secondary File Name

Description

Resolves to the Secondary File(s) field values.

If the Secondary File(s) field is empty, it resolves to empty string/blank.

Syntax

$(ops_secondary_filename)

$(ops_secondary_filename) is an alias for $(ops_remote_filename).

Example


Primary Agent Hostname

Description

If UDM Agent Option = UDM Agent Hostname; Resolves to the specified hostname.

If UDM Agent Option = UDM Agent or UDM Agent Cluster; Resolves to the IP address of the referenced Agent definition.

If UDM Agent Option = --None–; Resolves to empty string/blank.

If UDM Agent Option = Utility Agent; Resolves to *.

Syntax

${ops_primary_agent_hostname}

Example


Secondary Agent Hostname

Description

If UDM Agent Option = UDM Agent Hostname; Resolves to the specified hostname.

If UDM Agent Option = UDM Agent or UDM Agent Cluster; Resolves to the IP address of the referenced Agent definition.

If UDM Agent Option = --None–; Resolves to empty string/blank.

Syntax

${ops_secondary_agent_hostname}

Example


For Transfer Protocol = FTP/SFTP/FTPS

Local File Name

Description

Resolves to the Local Filename field values.

If the Local Filename field is empty, it resolves to empty string/blank.

Syntax

$(ops_local_filename)

$(ops_local_filename) is an alias for $(ops_primary_filename).

Example


Remote File Name

Description

Resolves to the Remote Filename field values.

If the Remote Filename field is empty, it resolves to empty string/blank.

Syntax

$(ops_remote_filename)

$(ops_remote_filename) is an alias for $(ops_secondary_filename).

Example



OMS Server Variables

The following OMS Server variables allow you to pass information into an OMS Server notification.

Last OMS Server Connected

Description

Resolves to the last OMS Server connected to the Controller in an OMS HA cluster.

Syntax

${ops_oms_last_connected}

Example


Last OMS Server Connected Time

Description

Resolves to the last time that the OMS Server connected to the Controller in an OMS HA cluster.

Syntax

${ops_oms_last_connected_time}

Example


OMS Server IP Address

Description

Resolves to the OMS Server IP address.

Syntax

${ops_oms_server_address}

Example


OMS Server Status

Description

Resolves to the current status of the OMS Server.

Syntax

${ops_oms_status}

Example


OMS Server sys_id

Description

Resolves to the sys_id of the OMS server.

Syntax

${ops_oms_id}

Example


OMS Server Messaging Sessions Status

Description

Resolves to the current status of the OMS Server messaging sessions (heartbeat, input, output): Operational, Impaired, None.

Syntax

${ops_oms_session_status}

Example


PeopleSoft Task and Task Instance Variables

The following built-in variables are available for PeopleSoft tasks and task instances:

Distribution Status

(For task instances only.)

Description

Resolves to the PeopleSoft task instance Distribution Status.

Syntax

${ops_distribution_status}

Example


Main Job Name

Description

Resolves to the PeopleSoft Main Job Name.

Syntax

${ops_main_job_name}

Example


Main Schedule Name

Description

Resolves to the PeopleSoft task/task instance Main Schedule Name.

Syntax

${ops_main_schedule_name}

Example


Process Instance

(For task instances only.)

Description

Resolves to the PeopleSoft task instance Process Instance.

Syntax

${ops_process_instance}

Example


Process Name

Description

Resolves to the PeopleSoft task/task instance Process/Job Name.

Syntax

${ops_process_name}

Example


Process Type

Description

Resolves to the PeopleSoft task/task instance Process Type.

Syntax

${ops_process_type}

Example


Run Status

(For task instances only.)

Description

Resolves to the PeopleSoft task instance Run Status.

Syntax

${ops_run_status}

Example


Recurring Task Instance Variables

The following built-in variables are available for Recurrent tasks and task instances:

Next Recurrence Time

Description

Resolves to the time when the Recurrence task next runs.

Syntax

${ops_next_recurrence_time}

Example


Recurrence Count

Description

Resolves to the current count of task recurrences.

Syntax

${ops_recurrence_count}

Example


Recurrence Count Minus One

DescriptionResolves to the current count of task recurrences minus one.
Syntax${ops_recurrence_count_minus_1}
Example

Source Instance ID

Description

Resolves to the ID of the Recurrence task instance.

Syntax

${ops_source_instance_id}

Example


Source Instance Name

Description

Resolves to the name of the Recurrence task instance.

Syntax

${ops_source_instance_name}

Example


Target Task ID

Description

Resolves to the ID of the target task.

Syntax

${ops_target_task_id}

Example


Target Task Name

Description

Resolves to the name of the target task.

Syntax

${ops_target_task_name}

Example



Remote File Monitor Task Instance Variables

The following built-in variables are available for Remote File Monitor task instances and provide information about the file or file(s) that matched the monitor's criteria.

You can use these variables in a Remote File Monitor action or in a successor task instance by propagating one or more of these built-in variable values to a parent workflow using the Set Variable action.

Base Trigger File Name

Description

Resolves to the base file name.

Syntax

${ops_trigger_file_name_simple}

Example


Files Matching Wildcard

Description

Resolves to a comma-separated list of files that matched the wildcard, if one was specified in the Remote Filename field in the Remote File Monitor task.

Syntax

${ops_trigger_files}

Example

Remote Trigger File Name

Description

Resolves to the remote file name.

Syntax

${ops_trigger_file_name}

Example


Remote Trigger File Name (No Path)

Description

Resolves to the remote file name without any path information.

Syntax

${ops_trigger_file_name_nopath}

Example


Trigger File Directory

Description

Resolves to the directory where the remote file is located, but not the file itself. ${ops_trigger_file_path} is an alias for ${ops_trigger_file_fullpath_no_separator}.

Syntax

${ops_trigger_file_path}

Example


Trigger File Directory (with Final Directory Separator)

Description

Resolves to the directory where the remote file is located, but not the file itself; includes the final directory separator.

Syntax

${ops_trigger_file_fullpath}

Example


Trigger File Directory (without Final Directory Separator)

Description

Resolves to the directory where the remote file is located, but not the file itself; does not include the final directory separator.

Syntax

${ops_trigger_file_fullpath_no_separator}

Example


Trigger File Extension

Description

Resolves to the file extension of the file.

Syntax

${ops_trigger_file_name_extension}

Example


Trigger Wildcard

Description

Resolves to the contents of the Remote Filename field in the Remote File Monitor task.

Syntax

${ops_trigger_wildcard}

Example

Trigger Wildcard Path Only

Description

Resolves to the path only, with the final slash but without the file name, from the Remote Filename field in the Remote File Monitor task.

Syntax

${ops_trigger_wildcard_path}

Example

Trigger Wildcard Path Only (without Final Slash)

Description

Resolves to the path only, without the final slash and without the file name, from the Remote Filename field in the Remote File Monitor task.

Syntax

${ops_trigger_wildcard_path_no_separator}

Example

SAP Task Instance Variables

For an SAP task instance, where applicable, the following built-in variables resolve to the SAP jobname and SAP jobid of the job running in the SAP system. If you need to use the SAP jobname and/or the SAP jobid from one SAP task instance in a successor SAP task instance, you can use the Set Variable action to propagate these built-in variable values to the parent workflow.

SAP InfoPackage Request ID

Description

Resolves to the SAP InfoPackage Request ID.

Syntax

${ops_sap_requestid}

Example


SAP Job ID

Description

Resolves to the SAP job ID.

Syntax

${ops_sap_jobid}

Example


SAP Job Name

Description

Resolves to the SAP job name.

Syntax

${ops_sap_jobname}

Example


SAP Process Chain ID

Description

Resolves to the SAP Process Chain ID.

Syntax

${ops_sap_chainid}

Example


SAP Process Chain Log ID

Description

Resolves to the SAP Process Chain Log ID.

Syntax

${ops_sap_logid}

Example


SQL and Stored Procedure Task Instance Variables

The following built-in variables are used in SQL tasks and Stored Procedure tasks to collect SQLException data, if any:

Error Message

Description

Resolves to any error message generated by the database.

Syntax

${ops_sql_error_msg}

Example


Processed Rows

Description

Resolves to the number of rows processed.

Syntax

${ops_sql_rows}

Example


Return Code for SQL Statement Outcome

Description

Resolves to a return code that indicates the outcome of the most recently executed SQL statement.

Syntax

${ops_sql_state}

Example


SQL Task Instance Variables

The following built-in variable is available for SQL task instances.

SQL Command Field

Description

Resolves to the value of the SQL Command field.

Syntax

${ops_sql_command}

Example


Stored Procedure Task Instance Variables

The following built-in variable is available for Stored Procedure task instances and provides information about the stored procedure itself.

Stored Procedure Name

Description

Resolves to the value from the Stored Procedure Name field.

Syntax

${ops_stored_proc_name}

Example


System Monitor Task Instance Variables

The following System Monitor variables show the results for Resource Available and Actual Available that can be utilized in System Monitor tasks.

Actual Size

Description

Actual size determined by the agent.

Syntax

${ops_sm_actual_size}

Example


Actual Size (Rounded)

Description

Same as ops_sm_actual_size, except rounded to the nearest integer.

Syntax

${ops_sm_actual_int_size}

Example


Actual Size (Scale)

Description

Scale of the actual size determined by the agent.

Syntax

${ops_sm_actual_scale}

Example


Scale

Description

Scale specified in the By Scale field for Resource Available of the System Monitor task definition.

Syntax

${ops_sm_scale}

Example


Size

Description

Size specified in the Resource Available field of the System Monitor task definition.

Syntax

${ops_sm_size}

Example


Size (Rounded)

Description

Same as ops_sm_size, except that ops_sm_int_size is rounded to the nearest integer.

Syntax

${ops_sm_int_size}

Example


Task Instance Variables

The following built-in variables are associated with task instances for all task types.

Cluster Node Hostname

Description

Resolves to the hostname of the Active cluster node.

Syntax

${ops_cluster_hostname}

Example

Cluster Node ID

Description

Resolves to the Active cluster node's internally-generated build ID.

Syntax

${ops_cluster_id}

Example

Cluster Node IP Address

Description

Resolves to the IP address of the Active cluster node.

Syntax

${ops_cluster_ipaddr}

Example

Cluster Node Mode

Description

Resolves to the current mode of the cluster node: Offline, Active, Passive.
 
For more information, see Viewing Node Status.

Syntax

${ops_cluster_mode}

Example

Cluster Node Name

Description

${ops_cluster_name} is an alias for the ${ops_cluster_id} variable.

Syntax

${ops_cluster_name}

Example

Cluster Node Running Time

Description

Resolves to the numbers of days, hours, and minutes that the Active cluster node has been running since it was last started.

Syntax

${ops_cluster_uptime}

Example

Cluster Node Start Time

Description

Resolves to the date and time the Active cluster node (server) was started.

Syntax

${ops_cluster_start_time}

Example

Command

Description

For tasks that launch a command on a Windows or Linux/Unix machine; resolves to the task command.

Syntax

${ops_cmd}

Example


Command Parameters

Description

For tasks that launch a command on a Windows or Linux/Unix machine; resolves to the task command parameters.

Syntax

${ops_cmd_parms}

Example


Custom Field 1

Description

Resolves to the value of user-defined field #1.

Syntax

${ops_custom_field1}

Example


Custom Field 2

Description

Resolves to the value of user-defined field #2.

Syntax

${ops_custom_field2}

Example


Description

Description

Resolves to the value of the Task Description field.

Syntax

${ops_description}

Example


Duration

Description

Resolves to the task instance Duration.

Syntax

${ops_duration_text}

Example

ops_duration_text = 2 Minutes 10 Seconds

Duration In Seconds

Description

Resolves to the task instance Duration In Seconds.

Syntax

${ops_duration}

Example

ops_duration = 130000

End Time

Description

Resolves to the task ending time.

Syntax

${ops_end_time}

Example


End Time: Average Estimated

Description

Resolves to the Average Estimated End Time in the server's time zone.

Syntax

${ops_avg_estimated_end_time}

Example

${ops_avg_estimated_end_time} > 2018-10-16 15:01:45 -0400

End Time: Highest Estimated

Description

Resolves to the Highest Estimated End Time in the server's time zone.

Syntax

${ops_highest_estimated_end_time}

Example

${ops_highest_estimated_end_time} > 2018-10-16 15:01:45 -0400

End Time: Lowest Estimated

Description

Resolves to the Lowest Estimated End Time in the server's time zone.

Syntax

${ops_lowest_estimated_end_time}

Example

${ops_lowest_estimated_end_time} > 2018-10-16 15:01:44 -0400

End Time: User Estimated

Description

Resolves to the User Estimated End Time in the server's time zone.

Syntax

${ops_user_estimated_end_time}

Example

${ops_user_estimated_end_time} > 2018-10-16 15:01:54 -0400

Execution User ID

Description

Resolves to the ID of the user who launched the task or to the ID of the user who enabled the trigger that launched the task.

Syntax

${ops_execution_user}

Example


Instance Number

Description

Resolves to the sequentially assigned number, maintained per task, representing the creation order of the instance. For example, if you launch a task twice, the first task instance will have instance number 1, and the second task instance will have instance number 2.

Syntax

${ops_instance_number}

Example


Launch Time

Description

Resolves to the task launch time. For workflows, all descendants will have the same launch time as the top-level workflow.

Syntax

${ops_launch_time}

Example


Maximum Retry Count

Description

Resolves to the maximum retry count.

Syntax

${ops_retry_maximum}

Example


Parent Workflow Instance sys_id

Description

Resolves to the sys_id of the parent workflow task instance.

Syntax

${ops_workflow_id}

Example


Parent Workflow Name

Description

Resolves to the name of the parent workflow.

Syntax

${ops_workflow_name}

Example


Projected End Time of Workflow

Description

Resolves to the projected end time of workflow, based on its critical path calculations.

Syntax

${projected_end_time}

Example


Queued Time

Description

Resolves to the date and time that the task was queued for processing.

Syntax

${ops_queued_time}

Example


Reference Id

Description

Resolves to the sequentially assigned number, maintained per task, representing the creation order of the instance. For example, if you launch a task twice, the first task instance will have instance number 1, and the second task instance will have instance number 2.
 

Note

Although it still is supported, the Reference Id built-in variable has been superseded by the Instance Number built-in variable.

Syntax

${ops_task_ref_count}

Example


Retry Count

Description

Resolves to the current retry count.

Syntax

${ops_retry_count}

Example


Retry Interval

Description

Resolves to the retry interval (seconds).

Syntax

${ops_retry_interval}

Example


Script ID

Description

For Windows, Linux/Unix, and SAP tasks where a Script or SAP Definition from Scripts is specified; resolves to the Controller system ID of the script.

Syntax

${ops_script_id}

Example


Script Name

Description

For Windows, Linux/Unix, and SAP tasks where a Script or SAP Definition from Scripts is specified; resolves to the Controller name of the script.

Syntax

${ops_script_name}

Example


Script Parameters

Description

For tasks that run a script on a Windows or Linux/Unix machine; resolves to the task script parameters.

Syntax

${ops_script_parms}

Example


Starting Time

Description

Resolves to the task starting time.

Syntax

${ops_start_time}

Example


Task Instance Attempts

Description

Resolves to the current task instance attempt count. Each Re-run operation increments the attempt. Initial attempt is 1.

Syntax

${ops_attempt}

Example


Task Instance Definition ID

Description

Resolves to the task instance definition ID.

Syntax

${ops_task_definition_id}

Example


Task Instance Exit Code

Description

Resolves to the task instance exit code, if any.

Syntax

${ops_exit_code}

Example


Task Instance Name

Description

Resolves to the task instance name.

Syntax

${ops_task_name}

Example


Task Instance Status

Description

Resolves to the current task instance status.

Syntax

${ops_status}

Example


Task Instance Status Description

Description

Resolves to the task instance status description.

Syntax

${ops_status_description}

Example


Task Instance sys_id

Description

Resolves to the sys_id of the task instance.

Syntax

${ops_task_id}

Example


Task Name at Instance Creation Time

Description

Resolves to the name of the task at the time the task instance was created.

Note

If the name of the task contains variables, those variables contained in the task will be fully resolved when using this built-in variable, ${ops_task_security_name}.

Syntax

${ops_task_security_name}

Example


Task Type

Description

Resolves to the task type.

Syntax

${ops_task_type}

Example


Task Vertex ID

Description

Resolves to the value of the task’s vertex id in a workflow.

Syntax

${ops_vertex_id}

Example

Ops_vertex_id = 5

Time Zone (Task time zone)

Description

Resolves to the time zone of the task instance, as specified by the Time Zone Preference field.

Syntax

${ops_task_time_zone}

Example


Time Zone (Trigger time zone)

Description

Resolves to the time zone of the trigger that launched the task. If the task was launched by the Trigger Now/Launch Task command, the built-in variable will resolve to the command's time zone option, or if no time zone option was specified, the server time zone.

Syntax

${ops_time_zone}

Example


Top-Level Workflow Name

Description

Resolves to the name of the top-level workflow task instance.

Syntax

${ops_top_level_workflow_name}

Example


Top-Level Workflow Task Instance ID

Description

Resolves to the sys_id of the top-level workflow task instance.

Syntax

${ops_top_level_workflow_id}

Example


Virtual Resource Priority

Description

Resolves to the value of the task instance field Virtual Resource Priority.

Syntax

${ops_resource_priority}

Example



Task Monitor Task Instance/Trigger Variables

When the conditions of a Task Monitor task are met and its associated Task Monitor trigger launches one or more tasks, the following built-in variables are passed into the task instances being launched by the trigger.

For example, the Task Monitor trigger may specify an Email task that will launch each time the conditions in the associated Task Monitor task are met. You might want to specify one or more of these variables in the body of the email.

If the Task Monitor task is not associated with a trigger but is running within a workflow, on completion you can propagate one or more of these built-in variable values to the parent workflow level by using the Set Variable action. This allows you to pass information from the Task Monitor task to a successor task within the same workflow hierarchy.

Trigger Task Name

Description

Resolves to the name of the task instance that matched the Task Monitor conditions and fired the trigger.

Syntax

${ops_trigger_task_name}

Example


Trigger Task Status

Description

Resolves to the status of the task instance that matched the Task Monitor conditions and fired the trigger.

Syntax

${ops_trigger_task_status}

Example


Trigger Task sys_id

Description

Resolves to the sys_id of the task instance that matched the Task Monitor conditions and fired the trigger.

Syntax

${ops_trigger_task_id}

Example


Trigger Task Type

Description

Resolves to the type of the task instance that matched the Task Monitor conditions and fired the trigger.

Syntax

${ops_trigger_task_type}

Example


Trigger Workflow Id

Description

Resolves to the uuid of the workflow instance containing the task instance that matched the Task Monitor conditions and fired the trigger.

This variable is available only if the task instance that matched the Task Monitor conditions and fired the trigger is invoked by a workflow.

Syntax

${ops_trigger_workflow_id}

Example


Trigger Workflow Name

Description

Resolves to the name of the workflow instance containing the task instance that matched the Task Monitor conditions and fired the trigger.
 
This variable is available only for a Task Monitor task that has a Workflow Condition specified. If a workflow condition is specified, ${ops_trigger_workflow_name} will resolve to the name of the workflow instance that the workflow condition matched.

Syntax

${ops_trigger_workflow_name}

Example


Trigger Variables

The following built-in variables are associated with all trigger types.

When a task is launched by a t