SAP Task Properties

chainDesc

Chain Description

If sapDisplayCommand equals Process Chains (19); Displays the list of processes contained within the specified process chain.

N

chainId

Chain ID

If commandGroup is one of the following; ID of the process chain to run:

• Run Process Chain
• Start Process Chain
• Wait Process Chain
• Interrupt Process Chain
• Display and sapDisplayCommand is Process Chains (19), Process Chain (20), Process Chain Log (21), Process Chain Start Condition (22), or Process Chain Status (23)

Y

commandGroup

Command Group

Universal Connector command group.

Valid values:

• As String = Run, As Value = 1
• As String = Submit, As Value = 2
• As String = Modify, As Value = 3
• As String = Start, As Value = 4
• As String = Wait, As Value = 5
• As String = Abort, As Value = 6
• As String = Purge Job, As Value = 7
• As String = Raise Event, As Value = 8
• As String = Display, As Value = 9
• As String = Generate Variant Definition, As Value = 10
• As String = Generate Job Definition, As Value = 11
• As String = Create CM Profile, As Value = 12
• As String = Set CM Criteria, As Value = 13
• As String = Activate CM Profile, As Value = 14
• As String = Deactivate CM Profile, As Value = 15
• As String = Delete CM Profile, As Value = 16
• As String = Purge Variant, As Value = 17
• As String = Run Process Chain, As Value = 18
• As String = Start Process Chain, As Value = 19
• As String = Wait Process Chain, As Value = 20
• As String = Interrupt Process Chain, As Value = 21
• As String = Run InfoPackage, As Value = 22
• As String = Start InfoPackage, As Value = 23
• As String = Wait InfoPackage, As Value = 24

Default is Run (1).

N

commandOptions

SAP Command Options

Any additional command options supported by Universal Connector.

N

dataSource

Data Source

If sapDisplayCommand is InfoPackages(24); SAP InfoPackage data source.

N

defFile

Definition File

For Run, Submit, and Modify commandGroups if repositoryOrFilesys is File System; Path and file name of the file.

Y

definitionOrModel

Definition or Model

If commandGroup is Run(1); Specification for how the new SAP job will be created, based either on a USAP Definition File or an SAP Model Job.

Valid values:

• As String = USAP Definition File, As Value = 1
• As String = SAP Model Job, As Value = 2

Default is USAP Definition File (1).

N

definitionOrModelJobVar

Definition or Model

If commandGroup is Submit(1); Name of a variable that will be resolved at run time to the name of the Definition or Model to use.

Valid values:

• As String = USAP Definition File, As Value = 1
• As String = SAP Model Job, As Value = 2
• As String = SAP Model Variant, As Value = 3

Default is USAP Definition File (1).

N

dispAbapName

SAP ABAP Program Name

If definitionOrModelJobVar is SAP Model Variant; Name of an ABAP program in an SAP system to which the model variant belongs.

Y

dispSapEventId

SAP Event

If sapDisplayCommand is Event History(16); ID of the Event.

Y

dispSapEventParm

SAP Event Parameter

If sapDisplayCommand is Event History(16); Optional parameter value for the event.

N

dispVariant

SAP Variant Name

Pre-existing SAP variant name to use as the model variant.

N

environment

Environment Variables

List of environment variables needed by the program to run:

<environment>
       <variable>
             <name>env1</name>
             <value>test1</value>
       </variable>
       <variable>
             <name>env2</name>
             <value>test2</value>
       </variable>
</environment>

N

exitCodeOutput

Output File

If outputType = FILE (3); Path and file name of the output file that should be scanned for the text in exitCodeText.

N

exitCodeProcessing

Exit Code Processing

Specification for how the Controller should determine whether the executed command failed or completed successfully.

Valid values:

• As String = Success Exitcode Range, As Value = 1
• As String = Failure Exitcode Range, As Value = 2
• As String = Success Output Contains, As Value = 3
• As String = Failure Output Contains, As Value = 4
• As String = Step Conditions, As Value = 5

Default is Success Exitcode Range (1).

N

exitCodes

Exit Codes

If exitCodeProcessing = Success Exitcode Range (1) or Failure Exitcode Range (2); Range of exit codes.

Format: Numeric. Use commas to list a series of exit codes; use hyphens to specify a range. Example: 1,5, 22-30.

Y

exitCodeText

Scan Output For

If exitCodeProcessing = Success Output Contains (3) or Failure Output Contains (4); text for which the Controller should scan the output file.

The Controller will process this field as a regular expression.

Y

immediate

Start Immediately

If commandGroup is Run(1) or Start(4), or start is true; Causes the job to fail if SAP resources are not available to start the job immediately (for example, a background work process). Otherwise, the job will wait for SAP resources to become available.

Boolean; Valid values: true/false. Default is false.

N

infoPackage

InfoPackage

If commandGroup is one of the following; Name of the InfoPackage:

• Run InfoPackage (22)
• Start InfoPackage(23)
• Display(9) and sapDisplayCommand equals InfoPackages (24).

Y

infoPackageJobname

InfoPackage Job Name

If commandGroup is one of the following; Name of the SAP batch job that processes the InfoPackage request:

• Run InfoPackage (22)
• Start InfoPackage (23)

Y

infoSource

InfoSource

If sapDisplayCommand equals InfoPackages (24); SAP InfoSource.

N

jobId

SAP Job ID

Job ID of the SAP job.

Variables are supported.

N

jobLog

Print Job Log

If commandGroup is Wait (5) or wait is true; Specification for whether or not the job's joblog is returned.

Boolean; Valid values: true/false. Default is false.

N

jobName

SAP Job Name

Job name of the SAP job.

Variables are supported.

N

jobStatus

Status

If sapDisplayCommand equals InfoPackages(24); Current status for an SAP job.

N

logId

Log ID

If commandGroup is one of the following; Log ID for process chain instance to be restarted:

• Start Process Chain and pcRestart is true.
• Wait Process Chain.
• Display (9) and sapDisplayCommand is Process Chain (20), Process Chain Log (21), or Process Chain Status (23).

Y

outputFailureOnly

Failure Only

If outputReturnType = STDOUT (2), STDERR (3), FILE (4), or OUTERR (6), and waitForOutput is false; Indication for whether output should be retrieved on task failure only.

Boolean; Valid values: true/false. Default is false.

N

outputReturnFile

Output File

If outputReturnType is FILE (4); Path and file name containing the output that you want automatically retrieved and attached to the task instance.

Y

outputReturnNline

Number of Lines

If outputReturnType is STDOUT (2), STDERR (3), FILE (4), or OUTERR (6); Allows you to limit the retrieved data to the number of lines specified.

Integer; Default is the value of the Retrieve Output Default Maximum Lines Universal Controller system property.

N

outputReturnSline

Starting Line

If outputReturnType is STDOUT (2), STDERR (3), FILE (4), or OUTERR (6); Allows you to instruct the Controller to retrieve data beginning at this line.

Integer; Default is 1.

N

outputReturnText

Scan Text

If outputReturnType is STDOUT (2), STDERR (3), FILE (4), or OUTERR (6); Instructs the Controller to scan the data for the text specified and retrieve only that.

The Controller will process this field as a regular expression.

N

outputReturnType

Automatic Output Retrieval

Specification for whether you want the Controller to automatically retrieve any output from the job and attach it to the task instance record.

N

outputType

Output Type

If exitCodeProcessing = Success Output Contains (3) or Failure Output Contains (4); Type of output.

Valid values:

• As String = STDOUT, As Value = 1
• As String = STDERR, As Value = 2
• As String = FILE, As Value = 3

Default is STDOUT (1).

Y

pcRestart

Restart

If commandGroup equals Start Process Chain (18); Specification for whether or not to restart failed and cancelled processes (R or X) in the specified process chain instance.

Boolean. Valid values: true/false. Default is false.

N

printAppLog

Print Application Log

If commandGroup is Run (1) or Wait (5), or wait is true; Specification for whether or not the job's application log, if one was generated, is returned.

Boolean. Valid values: true/false. Default is false.

N

printAppRc

Print Application RC

If commandGroup is Run (1) or Wait (5) or wait is true; Specification for whether or not the job's application return codes, if they were set, are returned.

Boolean. Valid values: true/false. Default is false.

N

purge

Delete SAP Job on Completion

If commandGroup is Wait(5) or wait is true;

Boolean. Valid values: true/false. Default is false.

N

repositoryOrFilesys

Script or File System

Specification for whether the USAP definition file exists in the file system of the machine where the Agent is running or in Scripts.

Valid values:

• As String = Script, As Value = 1
• As String = File System, As Value = 2

Default is Script (1).

N

requestId

Request ID

If commandGroup is Wait InfoPackage(24) or Display(9) and sapDisplayCommand is InfoPackages Status (25); Request ID of the InfoPackage that is to be monitored.

Y

retryIndefinitely

Retry Indefinitely

Specification for whether or not the Controller should continue trying indefinitely to run this task.

Boolean; Valid values: true/false. Default is false. This value overrides any value placed in retryMaximum.

N

retryInterval

Retry Interval]

Number of seconds between each retry.

Integer; Default is 60.

N

retryMaximum

Maximum Retries

Maximum number of times that the Controller should retry this task after it has started and gone to a failed state.

Integer; Default is 0.

N

retrySuppressFailure

Suppress Intermediate Failures

Specification for whether or not the following will be suppressed until all scheduled retry attempts have been made:

• All Actions (Abort, Email Notification, Set Variable, SNMP Notification, and System Operation) to be made against the task instance.
• Workflow conditional path processing; any Successors waiting on a failure path will not be released.
• Task Monitors will not be notified of the Failed status. Also, any Task Monitor task that has a Time Scope in the past will disqualify any matching task instance in the past with a Failed status if the task instance is scheduled for automatic retry and for which Suppress Intermediate Failures has been enabled.
• Any Workflow containing the Failed task instance will not transition to the Running/Problems status.

Boolean; Valid values: true/false. Default is false.

N

runtimeDir

Runtime Directory

Directory from which the application should be executed. Variables are supported.

N

sapCmProfileId

SAP Criteria Manager Profile ID

If commandGroup is Set CM Profile, Activate CM Profile, or Delete CM Profile; ID of the profile.

Y

sapCmProfileType

SAP Criteria Manager Profile Type

If commandGroup is Set CM Profile, Activate CM Profile, Deactivate CM Profile, or Delete CM Profile; Type of profile. For the default criteria types provided by SAP, the values are:

• EVTHIS - Identifies a criteria type for event history.
• EVHIRO - Identifies a criteria type for the reorganization of raised events.
• INTERC - Identifies a criteria type for job interception.

Y

sapCmXmlFile

SAP Criteria Manager XML File

If commandGroup is Create CM Profile or Set CM Profile, and repositoryOrFilesys is File System; Name of the file that contains the Criteria Manager information.

Y

sapCommandMask

SAP Command Mask

Name of a command or a mask used to select SAP external commands that match the mask.

N

sapConnection

SAP Connection

Name of the SAP connection.

The SAP connection specifies information about the SAP server.

Y
(unless {{sap
ConnectionVar}}
is specified)

sapConnectionVar

sapConnectionVar

SAP Connection Variable

Name of a variable that will be resolved at run time to the name of the SAP Connection to use.

Y
(unless {{sap
Connection}}
is specified)

sapConnection

sapCred

SAP Credentials

Login credentials that the Controller will use to access the SAP system.

The credentials are stored in the Universal Controller credentials table; see Credentials.

Y
(unless sapCredVar
is specified)

sapCredVar

sapCredVar

SAP Credentials Variable

Name of a variable that will be resolved at run time to the name of the SAP Credentials to use.

Y
(unless sapCred
is specified)

sapCred

sapDispConfirmEvents

Confirm Returned Events

If sapDisplayCommand is Event History(16); Specification for whether or not the status of returned events should be changed in the SAP system.

N

sapDispEventSelectState

Event Select State

Event status of the events which should be read.

Valid values:

• As String = New, As Value = 1
• As String = Confirmed, As Value = 2
• As String = All, As Value = 3

Default is New (1).

N

sapDisplayCommand

Display Command

Displays the specified data, which is written to standard output.

Valid values:

• As String = Job Log, As Value = 1
• As String = Spool List, As Value = 2
• As String = Status, As Value = 3
• As String = Variants, As Value = 4
• As String = Variant, As Value = 5
• As String = Job Definition, As Value = 6
• As String = Select, As Value = 7
• As String = System Log, As Value = 8
• As String = Intercept Table, As Value = 9
• As String = Intercepted Jobs, As Value = 10
• As String = Reports, As Value = 11
• As String = Commands, As Value = 12
• As String = Output Devices, As Value = 13
• As String = Print Formats, As Value = 14
• As String = Selection Screen, As Value = 15
• As String = Event History, As Value = 16
• As String = Criteria Manager Profiles, As Value = 17
• As String = Criteria Manager Criteria, As Value = 18
• As String = Process Chains, As Value = 19
• As String = Process Chain, As Value = 20
• As String = Process Chain Log, As Value = 21
• As String = Process Chain Start Condition, As Value = 22
• As String = Process Chain Status, As Value = 23
• As String = InfoPackages, As Value = 24
• As String = InfoPackages Status, As Value = 25

 
Default Value: Log (1)

N

sapEventId

SAP Event

If commandGroup is Raise Event (8); Name of the event.

Y

sapEventParm

SAP Event Parameter

If commandGroup equals Raise Event(8); Optional parameter value for the event.

N

sapFromDate

From Date

If sapDisplayCommand is Select (7) or System Log (8); Earliest date to use for job selection or syslog request.

N

sapLang

SAP Language

SAP logon language used when executing the SAP task.

Valid values:

• Any valid 1-character SAP language identifier.
• Any valid 2-character ISO language identifier.
• (no value). SAP will use the default language set up for the user. If there is no such default, the default is EN (English).

sapPrinterName

SAP Printer Name

If sapDisplayCommand is Print Formats (14); Name of the SAP printer.

Y

sapToDate

To Date

If sapDisplayCommand is Select(7) or System Log (8); Latest date to use for job selection or syslog request.

N

script

Script

If repositoryOrFilesys is Script; Name of an SAP Definition script in the Controller database.

Y

sourceSystem

Source System

If sapDisplayCommand equals InfoPackages (24); SAP InfoPackage source system.

N

spoollist

Print Spooled Output

If commandGroup is Wait(5) or wait is true; Specification for whether or not the spoollists of all job steps are returned.

Boolean; Valid values: true/false. Default is false.

N

start

Start

Specification for whether or not the newly-defined SAP job should be started.

Boolean; Valid values: true/false. Default is false.

N

stepNum

SAP Job Step Number

If sapDisplayCommand is Spool List; Step number of the SAP job step.

Y

targetJobName

Target Job Name

If commandGroup equals Run or Submit and definitionOrModel is SAP Model Job (2); Name of the new SAP job being created.

If you do not include targetJobName, the Controller uses the same name as the SAP Model Job.

N

targetServer

SAP Target Server

If commandGroup is Run (1) or Start (4), or start is true; Name of an SAP instance at which a background job should be run.

The name has the following format:

[host name]_[SAP System name]_[SAP System number]

Where host name is the name of the server computer on which the instance is running, as specified in the system profile parameter SAPLOCALHOST. For example:

hs0123_C11_55

N

targetVariantName

Target Variant Name

If commandGroup is Submit and definitionOrModelJobVar is SAP Model Variant (3); One or more replacement variants for ABAP program job steps in an SAP job.

Y

useAppRc

Use Application RC

If commandGroup is Run (1) or Wait(5), or wait is true; Specification for whether or not the SAP job's application return codes will be used to determine the return code for the Universal Controller task.

Boolean; Valid values: true/false. Default is false.

N

wait

Wait

Specification for whether or not the Controller should wait for the SAP process chain to complete processing.

Boolean; Valid values: true/false. Default is false.

N

waitForOutput

Wait For Output

If outputReturnType = STDOUT (2), STDERR (3), FILE (4), or OUTERR (6), and outputFailureOnly is false; Specification for whether or not the task should wait for the requested output before completing.

Boolean; Valid values: true/false. Default is false.

N