UNIX Listing Using a Shell Script

In this example, the exec command runs on a UNIX system via UCMD Manager and executes the sh command to a remote UNIX system using UCMD Server. With a shell interpreter, such as Cygwin, installed under Windows, the same example would also apply to a Windows system. The example was tested using Linux as both the local and remote platforms.

Both the shell script and the file created by the shell script reside on the remote system. If you are walking through all the examples in order, notice that in this example the shell script redirects stdout to the stdout.txt file, whereas in the Windows example the command initiated by the remote UCMD server redirected stdout to the stdout.txt file.

Due to this difference, in this example stdout.txt is created in the current directory as set by the shell script and in the Windows example it is created in the UCMD server working directory.

1. set echo=yes
2. open r=houston user=joe pwd=abcdefg port=7887
3. exec r cmd="sh /home/joe/wrk/xmp/ls/ls.sh" user=joe pwd=abcdefg port=7887
4. quit 

UDM Script Explanation

1. Turns echo on to put the commands into the transaction log.
2. Open a connection to the remote UDM server using remote port 7887. This is the default port and can be changed by setting the port number in the Universal Broker configuration file on the remote system. When the port number is changed, Universal Broker on the remote system on which the configuration file change was made must be stopped and then started.
3. Execute the shell script on the remote system. The port must be specified on the command if it is set to a value other than the default value.
4. Quit command stops UDM script execution and the UDM script completes.

The shell script changes the current directory, generates the listing via the ls shell command, redirects the output of the ls command to the stdout.txt file and then uses the cat shell command to output the contents of stdout.txt to the stdout stream.

The stdout stream is returned by the UDM Server to the UDM Manager and is output to the transaction log.

cd /home/joe/wrk/xmp/ls
ls > stdout.txt
cat stdout.txt

Output sent to stdout.txt.

ls.sh
stdout.txt

Output sent to the UDM transaction log via stdout from the UDM Manager.

2011.07.78 10.13.06.845 UNV2800I Universal Data Mover 6.3.0 Level 0 Release Build 104 started.
2011.07.78 10.13.06.845 Processing script: ls.udm
2011.07.78 10.13.06.847 open r=houston user=joe pwd=* port=7887
2011.07.78 10.13.07.114 Data session established using cipher: NULL-MD5
2011.07.78 10.13.07.159 Two party session established with r (component 1278600806)
2011.07.78 10.13.07.161 Transfer mode settings:
2011.07.78 10.13.07.198   type=binary
2011.07.78 10.13.07.198   trim=no
2011.07.78 10.13.07.198 Session options:
2011.07.78 10.13.07.198   Keep Alive Interval:    120
2011.07.78 10.13.07.198   Network Fault Tolerant: yes
2011.07.78 10.13.07.198 exec r cmd="sh /home/joe/wrk/xmp/ls/ls.sh" user=joe pwd=* port=7887
ls.sh
stdout.txt

2011.07.78 10.13.08.072 quit 
2011.07.78 10.13.08.076 Session closed
2011.07.78 10.13.08.076 Finished processing script: ls.udm
2011.07.78 10.13.10.076 UNV2801I Universal Data Mover 6.3.0 Level 0 Release Build 104 ended successfully.

UDM exec Command Parameters

The exec command parameters used in this example are:

Components

Universal Data Mover Manager for UNIX

Universal Command Server for UNIX