Overview

A Workflow is a task comprised of one or more tasks of one or more task types, including other Workflows.

To create a Workflow, you enter task Details just as you would for any task, and then design the Workflow on the Workflow Editor, where you add, connect, and organize the tasks that will comprise the Workflow.

During and after a Workflow run, you can view detailed results of the run in the Workflow Task Instance Details, and monitor the status of the Workflow on the Workflow Monitor.

Although a typical Workflow is a single group of tasks, a Workflow can contain multiple groups of tasks and/or individual tasks. Each task in a group of tasks is connected to one or more other tasks in that group. Each connection is made from one task (the predecessor) to another task (the successor). There is no limit to the number of connections that can be made to or from a task.

The following sample Workflow contains a single group of tasks.

When you launch a Workflow, the first predecessor task in all task groups, and all individual tasks, begin to run. In this example, task stonebranch-saptask-01 would begin to run.

Built-In Variables

The following built-in variables can be used in a Workflow task to pass data where appropriate:

Task Instance variables

Creating a Workflow Task

Step 1	From the Automation Center navigation pane, select Tasks > Workflow Tasks. The Workflow Tasks list displays a list of all currently defined Workflow tasks. Below the list, Workflow Task Details for a new Workflow task displays.
Step 2	Enter/select Details for a new Workflow task, using the field descriptions below as a guide. Required fields display an asterisk ( * ) after the field name. Default values for fields, if available, display automatically. To display more of the Details fields on the screen, you can either: Use the scroll bar. Temporarily hide the list above the Details. Click the New button above the list to display a pop-up version of the Details.
Step 3	Click a Save button. The Workflow task is added to the database, and all buttons and tabs in Workflow Task Details are enabled.
Step 4	Click the Edit Workflow button to display a blank Workflow Editor canvas.
Step 5	Follow the instructions provided below for designing the Workflow in the Workflow Editor.

Note

To open an existing record on the list, either:

Click a record in the list to display its record Details below the list. (To clear record Details below the list, click the New button that displays above and below the Details.)
Clicking the Details icon next to a record name in the list, or right-click a record in the list and then click Open in the Action menu that displays, to display a pop-up version of the record Details.
Right-click a record in the a list, or open a record and right-click in the record Details, and then click Open In Tab in the Action menu that displays, to display the record Details under a new tab on the record list page (see Record Details as Tabs).

Workflow Task Details

The following Workflow Task Details is for an existing Workflow task.

Depending on the values that you enter / select for these fields, and whether or not the Workflow task has ever been launched, more (or less) fields may display. See the field descriptions, below, for a description of all fields that may display in the Workflow Task Details.

For information on how to access additional details - such as Metadata and complete database Details - for Workflows (or any type of record), see Records.

Workflow Task Details Field Descriptions

The following table describes the fields, buttons, and tabs that display in Workflow Task Details.

Field Name	Description
General	This section contains general information about the Workflow task.
Name	User-defined name of this task (Maximum = 255 alphanumeric characters); variables supported. It is the responsibility of the user to develop a workable naming scheme for tasks.
Version	Unable to render {include} The included page could not be found.
Description	Unable to render {include} The included page could not be found.
Member of Business Services	Unable to render {include} The included page could not be found.
Resolve Name Immediately	Unable to render {include} The included page could not be found.
Time Zone Preference	Unable to render {include} The included page could not be found.
Hold on Start	Unable to render {include} The included page could not be found.
Hold Reason	Unable to render {include} The included page could not be found.
Virtual Resource Priority	Unable to render {include} The included page could not be found.
Workflow Details	This section contains assorted detailed information about the Workflow task.
Show/Hide Skipped Tasks	Unable to render {include} The included page could not be found.
Auto Layout	If Show/Hide Skipped Tasks = Hide Skipped; specification for the layout of the Workflow Monitor. Options: - - None - - Horizontal Layout Vertical Layout
Default Calendar	Default calendar used by the Workflow. If the Workflow is launched by a trigger, the trigger calendar overrides this default calendar.
Override Inherited Calendar	If enabled, uses the selected Default Calendar for this Workflow instead of the calendar used in the trigger or parent Workflow.
Wait / Delay Options	This section contains specifications for waiting to start and/or delaying on start the task.
Wait To Start	Unable to render {include} The included page could not be found.
Wait Time	Unable to render {include} The included page could not be found.
Wait Day Constraint	Unable to render {include} The included page could not be found.
Wait Duration	Unable to render {include} The included page could not be found.
Wait Duration In Seconds	Unable to render {include} The included page could not be found.
Delay On Start	Unable to render {include} The included page could not be found.
Delay Duration	Unable to render {include} The included page could not be found.
Delay Duration In Seconds	Unable to render {include} The included page could not be found.
Workflow Only	Unable to render {include} The included page could not be found.
Time Options	This section contains time-related specifications for the task.
Late Start	Unable to render {include} The included page could not be found.
Late Start Type	Unable to render {include} The included page could not be found.
Late Start Time	Unable to render {include} The included page could not be found.
Late Start Day Constraint	Unable to render {include} The included page could not be found.
Late Start Nth Amount	Unable to render {include} The included page could not be found.
Late Start Duration	Unable to render {include} The included page could not be found.
Late Finish	Unable to render {include} The included page could not be found.
Late Finish Type	Unable to render {include} The included page could not be found.
Late Finish Offset Type	Unable to render {include} The included page could not be found.
Late Finish Percentage Offset ( + )	Unable to render {include} The included page could not be found.
Late Finish Duration Offset ( + )	Unable to render {include} The included page could not be found.
Late Finish Duration Offset Unit	Unable to render {include} The included page could not be found.
Late Finish Time	Unable to render {include} The included page could not be found.
Late Finish Day Constraint	Unable to render {include} The included page could not be found.
Late Finish Nth Amount	Unable to render {include} The included page could not be found.
Late Finish Duration	Unable to render {include} The included page could not be found.
Early Finish	Unable to render {include} The included page could not be found.
Early Finish Type	Unable to render {include} The included page could not be found.
Early Finish Offset Type	Unable to render {include} The included page could not be found.
Early Finish Percentage Offset ( - )	Unable to render {include} The included page could not be found.
Early Finish Duration Offset ( - )	Unable to render {include} The included page could not be found.
Early Finish Duration Offset Unit	Unable to render {include} The included page could not be found.
Early Finish Time	Unable to render {include} The included page could not be found.
Early Finish Day Constraint	Unable to render {include} The included page could not be found.
Early Finish Nth Amount	Unable to render {include} The included page could not be found.
Early Finish Duration	Unable to render {include} The included page could not be found.
User Estimated Duration	Unable to render {include} The included page could not be found.
Critical Path Options	This section contains Critical Path-related specifications for the task.
Calculate Critical Path	Unable to render {include} The included page could not be found.
CP Duration	Unable to render {include} The included page could not be found.
CP Duration (Resolved)	Unable to render {include} The included page could not be found.
CP Duration Unit	Unable to render {include} The included page could not be found.
Workflow Execution Options	This section contains Execution Restriction specifications for the task if it is within a Workflow.
Execution Restriction	Unable to render {include} The included page could not be found.
Restriction Period	Unable to render {include} The included page could not be found.
Before Date	Unable to render {include} The included page could not be found.
Before Time	Unable to render {include} The included page could not be found.
After Date	Unable to render {include} The included page could not be found.
After Time	Unable to render {include} The included page could not be found.
Date List	Unable to render {include} The included page could not be found.
Statistics	This section contains time-related statistics for task instances of the task.
First Execution	Unable to render {include} The included page could not be found.
Last Execution	Unable to render {include} The included page could not be found.
Last Instance Duration	Unable to render {include} The included page could not be found.
Lowest Instance Time	Unable to render {include} The included page could not be found.
Average Instance Time	Unable to render {include} The included page could not be found.
Highest Instance Time	Unable to render {include} The included page could not be found.
Number of Instances	Unable to render {include} The included page could not be found.
Metadata	This section contains Metadata information about this record.
UUID	Universally Unique Identifier of this record.
Updated By	Name of the user that last updated this record.
Updated	Date and time that this record was last updated.
Created By	Name of the user that created this record.
Created	Date and time that this record was created.
Buttons	This section identifies the buttons displayed above and below the Workflow Task Details that let you perform various actions.
Save	Saves a new task record in the Controller database.
Save & New	Saves a new record in the Controller database and redisplays empty Details so that you can create another new record.
Save & View	Saves a new record in the Controller database and continues to display that record.
New	Displays empty (except for default values) Details for creating a new task.
Update	Unable to render {include} The included page could not be found.
View Parents	Unable to render {include} The included page could not be found.
Launch Task	Unable to render {include} The included page could not be found.
Edit Workflow	Displays the Workflow Editor for this task.
Copy	Creates a copy of this task, which you are prompted to rename.
Delete	Unable to render {include} The included page could not be found. Note You cannot delete a task if it is either: Specified in an enabled Trigger. The only task specified in a disabled Trigger.
Refresh	Refreshes any dynamic data displayed in the Details.
Close	For pop-up view only; closes the pop-up view of this task.
Tabs	This section identifies the tabs across the top of the Workflow Task Details that provide access to additional information about the task.
Workflow Task	Displays details about this Workflow task.
Task Run Criteria	Unable to render {include} The included page could not be found.
Step Conditions	Unable to render {include} The included page could not be found.
Variables	Unable to render {include} The included page could not be found.
Actions	Unable to render {include} The included page could not be found.
Virtual Resources	Unable to render {include} The included page could not be found.
Mutually Exclusive	Unable to render {include} The included page could not be found.
Step Actions	Lists all step actions created for this task.
Instances	Lists all instances of this Workflow.
Triggers	Unable to render {include} The included page could not be found.
Notes	Unable to render {include} The included page could not be found.
Versions	Unable to render {include} The included page could not be found.

Viewing a Workflow Task Instance

When a Workflow task is launched, the Controller creates a task instance record of that Workflow (and task instance records of all tasks in that Workflow).

A task instance contains detailed information about a single execution of that task.

You can access a Workflow task instance from:

Instances tab on the Workflow Task Details for that task
Activity Monitor
Task Instances list

Workflow Task Instance Details

The following Workflow Task Instance Details contains information on the execution of the Workflow shown in the Workflow Task Details.

Workflow Task Instance Details Field Descriptions

The following table describes the fields, buttons, and tabs that display in Workflow Task Instance Details.

Field Name	Description
General	This section contains general information about the task instance.
Instance Name	Name of this task instance.
Instance Number	Unable to render {include} The included page could not be found.
Description	Unable to render {include} The included page could not be found.
Member of Business Services	Unable to render {include} The included page could not be found.
Task	Unable to render {include} The included page could not be found.
Source Version	Unable to render {include} The included page could not be found.
Launch Source	Unable to render {include} The included page could not be found.
Source Instance	Unable to render {include} The included page could not be found.
Invoked by	Unable to render {include} The included page could not be found.
Execution User	Unable to render {include} The included page could not be found.
Calendar	Unable to render {include} The included page could not be found.
Time Zone Preference	Unable to render {include} The included page could not be found.
Virtual Resource Priority	Unable to render {include} The included page could not be found.
Status	This section contains information about the current status of the task instance.
Status	Unable to render {include} The included page could not be found.
Exit Code	Unable to render {include} The included page could not be found.
Status Description	Unable to render {include} The included page could not be found.
Operational Memo	Unable to render {include} The included page could not be found.
Evaluation Time	Unable to render {include} The included page could not be found.
Critical	Unable to render {include} The included page could not be found.
Wait Until Time	Unable to render {include} The included page could not be found.
Queued Time	Unable to render {include} The included page could not be found.
Trigger Time	Unable to render {include} The included page could not be found.
Launch Time	Unable to render {include} The included page could not be found.
Start Time	Unable to render {include} The included page could not be found.
End Time	Unable to render {include} The included page could not be found.
Duration	Unable to render {include} The included page could not be found.
Progress	Number of tasks in the Workflow that are in Success, Skipped, or Finished status / Total number of tasks in the Workflow.
Workflow Details	This section contains assorted detailed information about the task instance.
Show/Hide Skipped Tasks	Unable to render {include} The included page could not be found.
Wait / Delay Options	This section contains specifications for waiting to start and/or delaying on start the task.
Wait To Start	Unable to render {include} The included page could not be found.
Wait Time	Unable to render {include} The included page could not be found.
Wait Day Constraint	Unable to render {include} The included page could not be found.
Wait Duration	Unable to render {include} The included page could not be found.
Wait Duration In Seconds	Unable to render {include} The included page could not be found.
Delay On Start	Unable to render {include} The included page could not be found.
Delay Duration	Unable to render {include} The included page could not be found.
Delay Duration In Seconds	Unable to render {include} The included page could not be found.
Time Options	This section contains information on time-related specifications for the task instance.
Late Start	Unable to render {include} The included page could not be found.
Started Late	Unable to render {include} The included page could not be found.
Late Start Type	Unable to render {include} The included page could not be found.
Late Start Time	Unable to render {include} The included page could not be found.
Late Start Day Constraint	Unable to render {include} The included page could not be found.
Late Start Nth Amount	Unable to render {include} The included page could not be found.
Late Start Duration	Unable to render {include} The included page could not be found.
Computed Late Start Time	Unable to render {include} The included page could not be found.
Late Finish	Unable to render {include} The included page could not be found.
Finished Late	Unable to render {include} The included page could not be found.
Late Finish Type	Unable to render {include} The included page could not be found.
Late Finish Offset Type	Unable to render {include} The included page could not be found.
Late Finish Percentage Offset ( + )	Unable to render {include} The included page could not be found.
Late Finish Duration Offset ( + )	Unable to render {include} The included page could not be found.
Late Finish Duration Offset Unit	Unable to render {include} The included page could not be found.
Late Finish Time	Unable to render {include} The included page could not be found.
Late Finish Day Constraint	Unable to render {include} The included page could not be found.
Late Finish Nth Amount	Unable to render {include} The included page could not be found.
Late Finish Duration	Unable to render {include} The included page could not be found.
Computed Late Finish Time	Unable to render {include} The included page could not be found.
Early Finish	Unable to render {include} The included page could not be found.
Finished Early	Unable to render {include} The included page could not be found.
Early Finish Type	Unable to render {include} The included page could not be found.
Early Finish Offset Type	Unable to render {include} The included page could not be found.
Early Finish Percentage Offset ( - )	Unable to render {include} The included page could not be found.
Early Finish Duration Offset ( - )	Unable to render {include} The included page could not be found.
Early Finish Duration Offset Unit	Unable to render {include} The included page could not be found.
Early Finish Time	Unable to render {include} The included page could not be found.
Early Finish Day Constraint	Unable to render {include} The included page could not be found.
Early Finish Nth Amount	Unable to render {include} The included page could not be found.
Early Finish Duration	Unable to render {include} The included page could not be found.
Projected Late	Unable to render {include} The included page could not be found.
Critical Path Options	This section contains Critical Path-related specifications for the task.
Calculate Critical Path	Unable to render {include} The included page could not be found.
CP Duration	Unable to render {include} The included page could not be found.
CP Duration (Resolved)	Unable to render {include} The included page could not be found.
CP Duration Unit	Unable to render {include} The included page could not be found.
Workflow Execution Options	This section contains Execution Restriction specifications for the task if it is within a Workflow.
Execution Restriction	Unable to render {include} The included page could not be found.
Restriction Period	Unable to render {include} The included page could not be found.
Before Date	Unable to render {include} The included page could not be found.
Before Time	Unable to render {include} The included page could not be found.
After Date	Unable to render {include} The included page could not be found.
After Time	Unable to render {include} The included page could not be found.
Date List	Unable to render {include} The included page could not be found.
Statistics	This section contains time-related statistics for the task instance.
User Estimated End Time	Unable to render {include} The included page could not be found.
Lowest Estimated End Time	Unable to render {include} The included page could not be found.
Average Estimated End Time	Unable to render {include} The included page could not be found.
Highest Estimated End Time	Unable to render {include} The included page could not be found.
Projected End Time	System-supplied; projected end time of the task instance, calculated by the Controller based on the projected end time of its predecessor (or the maximum projected end time of all its predecessors, if more than one path exists to that task instance) plus its estimated critical path duration.
Metadata	This section contains Metadata information about this record.
UUID	Universally Unique Identifier of this record.
Updated By	Name of the user that last updated this record.
Updated	Date and time that this record was last updated.
Created By	Name of the user that created this record.
Created	Date and time that this record was created.
Status History	History of all statuses that the task instance has gone through.
Buttons	This section identifies the buttons displayed above and below the Workflow Task Instance Details that let you perform various actions.
Update	Unable to render {include} The included page could not be found.
Force Finish	Unable to render {include} The included page could not be found.
Hold	Unable to render {include} The included page could not be found.
Skip	Unable to render {include} The included page could not be found.
Release Recursive	Unable to render {include} The included page could not be found.
View Parent	Unable to render {include} The included page could not be found.
View Workflow	Unable to render {include} The included page could not be found.
Delete	Unable to render {include} The included page could not be found.
Refresh	Refreshes any dynamic data displayed in the Details.
Close	For pop-up view only; closes the pop-up view of this task instance.
Tabs	This section identifies the tabs across the top of the Workflow Task Instance Details that provide access to additional information about the task instance.
Workflow Task Instance	Displays details about this Workflow task instance.
Virtual Resources	Unable to render {include} The included page could not be found.
Exclusive Requests	Unable to render {include} The included page could not be found.
Step Conditions	Unable to render {include} The included page could not be found.
Notes	Unable to render {include} The included page could not be found.

Designing a Workflow

The Workflow Editor lets you select tasks for a Workflow, position them within the Workflow, and specify dependency relationships between the tasks.

Workflows can be as simple or elaborate as necessary. Zooming and scrolling features are provided that allow you to work on small areas of a very large Workflow, or to create simple ad hoc Workflows.

The following is a sample Workflow Editor for a Workflow consisting of a variety of task types. There are no restrictions on the types of tasks that can be included as part of a single Workflow; you can also put other Workflows into a Workflow.

Note

The name of the workflow that you are editing is shown:

At the bottom right corner of the Workflow Editor.
By hovering over the Workflow Editor tab at the top of the Workflow Editor.

See Workflow Editor Icons for a guide to the editing tools available for designing Workflows; for more detailed instructions, see the individual topics in this section, below.

Designing, Modifying, or Viewing Multiple Workflows

You can design, modify, or simply view multiple Workflows in the Workflow Editor at the same time.

Step 1	From the Workflow Tasks list, open the Workflow task for which you want to design, modify, or view the Workflow.
Step 2	Click the Edit Workflow button to display the Workflow Editor for the Workflow.
Step 3	Click the Workflow Tasks tab at the top of the Workflow Editor (next to the Workflow Editor tab) to redisplay the Workflow Tasks list.
Step 4	Open another Workflow task for which you want to design, modify, or view the Workflow.
Step 5	Click the Edit Workflow button to display the Workflow Editor for this second Workflow under a second tab.
Step 6	Open and display as many Workflows as desired, clicking the appropriate tab to create, modify, and view each one.

Workflow Editor Modes

The actions you can perform within the Workflow Editor depend on the Workflow Editor mode.

The Workflow Editor has three modes. Each mode, which you select by clicking the appropriate icon in the Workflow Editor toolbar, allows you to use one or more specific Workflow Editor tools.

Icon	Mode	Description
	Select	Clicking the Select icon on the Workflow Editor toolbar places the Workflow Editor in Select mode, which allows you to use all Workflow Editor tools except Connect and Pan. The Select mode is the default mode for the Workflow Editor.
	Connect	Clicking a Connect icon on the Workflow Editor toolbar places the Workflow Editor in Connect mode, which allows you to create connections between tasks. In Connect mode, you also can use all other Workflow Editor tools except Connect.
	Pan	Clicking the Pan icon on the Workflow Editor toolbar places the Workflow Editor in Pan mode, which allows you to scroll around in the Workflow. (You also can use the Outline tool in any mode) to scroll around in the Workflow. In Pan mode, you also can use all other Workflow Editor tools except Connect. Note Pan mode does not allow you to use the drag and drop method for moving, deleting, and copying groups of Workflow elements.

Workflow Editor Toolbar

The Workflow Editor toolbar, which displays above the Workflow Editor, contains icons for every tool that you need to design a Workflow.

A shadowed outline around the icon in the toolbar indicates the currently selected Workflow Editor mode.

The following example shows that the Workflow Editor is in Select mode.

You also can perform all task actions and connector actions in any mode.

Workflow Editor Tools

The following table describes the tools used to define Workflows, including the tools associated with the three Workflow Editor modes. The tools are listed by icon, as they appear - left to right - in the Workflow Editor toolbar.

Icon	Tool	Description
	Go to Parent	If this Workflow is embedded in another Workflow, navigates to the parent. If this Workflow has more than one parent, clicking this icon displays a list of all parent Workflows; in this case, to navigate to a parent Workflow, double-click the Workflow's icon. To return to your original Workflow, click its name. (The current Workflow name displays in the lower right corner of the editor.) Note To open an embedded Workflow (sub-Workflow) from its Parent Workflow, double-click the embedded Workflow.
	Open Workflow	Displays an Open Workflow pop-up dialog from which you can select a Workflow to replace the Workflow currently displayed in the Workflow Editor. (Make sure to save the current Workflow before replacing it.) The Workflow Search Result Limit Universal Controller system property defines how many Workflows display on the list. To replace the current Workflow, either double-click a Workflow name or you click and drag a Workflow icon into the Workflow Editor canvas. Note If you want to open another Workflow without replacing the current Workflow, see Designing, Modifying, or Viewing Multiple Workflows.
	Save	Saves the current Workflow.
	Print	Prints the current Workflow.
	Add Task	Displays the Task Find dialog, which allows you to search for and select tasks for the Workflow from a searchable list of defined tasks. (The Workflow Search Result Limit Universal Controller system property defines how many tasks display on the list.) To search for and select tasks: Click the Add Task icon. Optionally, enter a task name, a partial string, optionally using * or ? as wildcards, or select the type of task you are searching for. Click Search. Universal Controller displays the tasks that meet your selection criteria. To bring a task onto the Workflow Editor canvas, click and drag the task's icon out of the window and onto the canvas. To close the Task Find window, click the X in the upper right corner.
	Select	Places the Workflow Editor in Select mode.
	Pan	Places the Workflow Editor in Pan mode. To pan around the Workflow, click any white space in the Workflow Editor canvas and drag your cursor to display any section of the Workflow. To return to your original location, click the Actual Size icon.
	Connect (bent) Connect (straight)	Places the Workflow Editor in Connect mode. To create a connection: Click either icon. Click a predecessor task. If you are using Firefox, click the center of the task icon. Drag the cursor to the successor task. You will see a colored line as you drag. When you reach the successor task, release the cursor. The connector appears as a straight or bent line, depending on which icon you selected.
	Undo	Click to undo the most recent change.
	Redo	Click to redo the most recent change that you undid by clicking Undo.
	Cut	Deletes the selected element(s): tasks, connectors, or both. Use Ctrl+Click to select and cut multiple elements. You can paste cut tasks into the same Workflow Editor or into the Workflow Editor of any other Workflow. If you cut a connector, and include its source and target tasks in the cut, you can paste the cut connector (and the tasks) into the same Workflow Editor or into the Workflow Editor of any other Workflow. Note Do not use cut and paste to move Workflow elements; use select and drag.
	Copy	Copies the selected element(s): tasks, connectors, or both. Use Ctrl+Click to select and copy multiple elements. You can paste copied tasks into the same Workflow Editor or into the Workflow Editor of any other Workflow. If you copy a connector, and include its source and target tasks in the copy, you can paste the copied connector (and the tasks) into the same Workflow Editor or into the Workflow Editor of any other Workflow.
	Paste	Pastes the copied or cut element(s) into the currently open Workflow Editor or into the Workflow Editor of any other Workflow. If you want to paste a cut or copied connector, you must include the source and target tasks of the connector in the cut or copy.
	Delete	Permanently deletes the selected elements. Delete does not keep a copy of the deleted elements in memory.
	Fit	Fits the Workflow into the display. If necessary, this shrinks the icons and size of the Workflow in order to make it fit. You can undo a Fit by clicking the Actual Size icon.
	Zoom In	Zooms in (enlarges) the Workflow. To return the Workflow to its default size, click the Actual Size icon.
	Zoom Out	Zooms out (diminishes) the Workflow. To return the Workflow to its default size, click the Actual Size icon.
	Actual Size	Returns the Workflow to its default size after a Fit or Zoom.
	Zoom	Opens a window that allows you to specify a zoom ratio. For example, to double the size of the Workflow, enter 200 and click OK. To return the Workflow to its default size, click the Actual Size icon.
	Horizontal Layout	Reformats the Workflow into a horizontal layout.
	Vertical Layout	Reformats the Workflow into a vertical layout.
	Toggle Vertex Style	For running Workflows, switches the icon display between status-related icons and task-related icons (see Monitoring Workflows). This icon only appears on the icon bar when you are monitoring a running Workflow.
	Outline	For large Workflows, the outline provides a way of positioning a specific area of the Workflow in the display, without using the Pan mode. Click the Outline icon. The Outline window opens. In the Outline window, move and/or resize the blue box to identify the area of the Workflow you want to work on. The display repositions to show only the area within the blue box.
	Help	Displays help documentation for Workflows.
	Console	While a Workflow is running, you can click the Console icon to display processing messages.

Searching For and Adding Tasks

Step 1	Click the Add Task icon. The Task Find dialog displays.
Step 2	Several methods are available for finding tasks:wildcardsThe Task Find dialog lists the task(s) that match your search criteria.
Step 3	To add a task to the Workflow Editor canvas, click the icon to the left of the task and drag it onto the canvas. You can add any task to a Workflow multiple times. To differentiate between multiple additions of the same task in a Workflow, you can assign each of them a unique name used only within the Workflow; the name of the task in the Task Details will not change. To change the name of a task within a Workflow, display the Task Properties menu and select a new name in the name field.
Step 4	Repeat these steps until you have added all the tasks you need.
Step 5	Position the tasks on the canvas as desired. The connections that you will make between the tasks determine the order in which the tasks run, so position the tasks accordingly. For example:
Step 6	To close the Task Find window, click the X in the upper right corner. Or, to keep the window open but minimized, click the minimize icon.

Task Details

You can display the following detailed information for any task by hovering your mouse over the task.

Task Actions

For each task in a Workflow, the Controller provides a menu of actions that you can take on that task. You can perform task actions in any Workflow Editor mode.

To display the menu of task actions, right-click a task.

The following table describes each action in the menu:

Action	Description
View/Edit	Allows you to view and edit the Task Details for this task.
View/Edit In Tab	Allows you to view and edit the Task Details for this task in a new tab.
Cut	Cuts the task from its location in the Workflow. You can paste a cut task back into the same Workflow Editor or into the Workflow Editor of any other Workflow.
Copy	Creates a copy of the task for inclusion in the same Workflow Editor or for inclusion in the Workflow Editor of any other Workflow.
Paste	Pastes a copy of the task into the Workflow or into the Workflow Editor of any other Workflow.
Delete	Deletes the task from the Workflow. You cannot paste a deleted task back into the Workflow.
View/Edit Run Criteria	Allows you to view and edit any run criteria that has been created for this task. (This action is disabled for tasks that have been added to a Workflow but not saved.)
View/Edit z/OS Step Actions	z/OS Tasks only; Allows you to view and edit any z/OS step actions that have been created for this task. (This action is disabled for tasks that have been added to a Workflow but not saved.)
View Predecessors/Successors	Allows you to view all predecessors and successors of this task in the Workflow.
Details > Show Details	Allows you to display complete database details for this task.
Properties	Displays a menu of properties for the task.

Task Properties

One of the task actions available for any task in a Workflow is to display a list of properties for that task.

You can change the name of a task within a Workflow by entering a new name in the name field. By Default, the name of a task is its name in the Task Details. Changing the name of a task within a Workflow does not change its name in the Task Details.

Task Actions for Workflow

For the workflow displayed in the Workflow Editor, the Controller provides a menu of actions that you can take on that workflow. You can perform task actions in any Workflow Editor mode.

To display the menu of workflow task actions, right-click any white space in the Workflow Editor canvas.

The following table describes each action in the menu:

Action	Description
New Task...	Allows you to create and insert a new task into a Workflow and connect it to other tasks in the Workflow.
View/Edit	Allows you to view and edit the Task Details for this workflow task.
View/Edit In Tab	Allows you to view and edit the Task Details for this workflow task in a new tab.
View Children	Allows you to view a list of child tasks of this workflow task.
Paste	Allows you to paste cut or copied elements from this workflow or any other workflow into the Workflow Editor.
Launch Workflow	Allows you to launch this workflow task
Find In Workflow...	Allows you to find a task in this workflow task.
Pan To Top	Allows you to restore the displayed Workflow Editor for this workflow task to its default, top-left position.
Details > Show Details	Allows you to display complete database details for this workflow task.

Create and Insert Task

One of the task actions available for a Workflow displayed in the Workflow Editor is New Task..., which lets you create and insert a new task into the the Workflow Editor.

Step 1	Select New Task... in the Task Actions for Workflow menu to display a list of task types.
Step 2	Select a task type and, in the task Details for that task type, create a new task.
Step 3	Click the Save button to insert the new task into the Workflow Editor where the Action menu is created (the right-click location).
Step 4	Locate and connect the new task to other tasks in in the Workflow and click the Save icon.

Specifying Connections

After you have added tasks and positioned them on the Workflow Editor canvas, you must connect the tasks.

Step 1	Click one of the Connect icons to place the Workflow Editor in Connect mode.
Step 2	Click the predecessor task; that is, the task whose status will trigger the next task. For Firefox, make sure you click the center of the task icon.
Step 3	Drag your mouse to the successor task; that is, the task that will be triggered. As you drag your mouse, a red line display. Drag your mouse all the way to the center of the successor task; the red line becomes a dotted, green line - the connector between the tasks - and the successor task is highlighted.
Step 4	Release the mouse button. The connector becomes a highlighted, solid green line (identifying it as a default Success condition).. Optionally, you can reposition the connection by dragging it to a new location. Arrows on the connectors indicate the direction of the Workflow.
Step 5	Repeat this process for other connectors to be added.

Connector Details

You can display detailed information for any connector by hovering your mouse over it.

For example:

Connector Actions

For each connector in a Workflow, the Controller provides a menu of actions that you can take on that connector. You can perform connector actions in any Workflow Editor mode.

To display the menu of connector actions, right-click a connection.

The following table describes each action in the menu:

Action	Description
Conditions	Allows you to select a dependency condition for the connection.
Go To Source	Highlights the predecessor task for the connector and moves it to the center of the Workflow Editor display.
Go To Target	Highlights the successor task for the connector and moves it to the center of the Workflow Editor display.
Cut	Cuts the connector from its location in the Workflow. If you include the source and target tasks of a connector in the cut, you can paste the cut connector (and the tasks) into the same Workflow Editor or into the Workflow Editor of any other Workflow.
Copy	Creates a copy of the connector for inclusion in the Workflow if you include the source and target tasks of the connector in the copy. You can paste the copied connector (and the tasks) into the same Workflow Editor or into the Workflow Editor of any other Workflow.
Paste	Pastes a copy of the connector (if you also copied the source and target tasks of the connector) into the Workflow.
Delete	Deletes the connector from the Workflow. You cannot paste a deleted connector back into the Workflow.
Properties	Displays a menu of properties for the connector.

Connector Properties

One of the connector actions available for any connector in a Workflow is to display a list of properties for that connector.

The information in the connector properties is view-only.

Specifying Conditions on Connections

When you create a connection between the tasks in a Workflow, you can specify a dependency condition between the predecessor and successor task. The successor task will run if the condition that you specify matches the condition of the predecessor task.

By default, a Success condition is specified automatically for a connection when you create it; if the predecessor task runs to Success, the successor task will run.

The dependency condition that you select for a connection, as allowed for the task type of the predecessor task (see Conditions per Task Type, below), determines the format of the connector in the Workflow Editor.

Condition	Connector Format	Description
Success	Solid black line	Run the successor task if the predecessor task goes to Success.
Failure	Dotted black line	Run the successor task if the predecessor task goes to Failure.
Success/Failure	Dotted black line	Run the successor task if the predecessor task goes to Success or Failure.
Exit Code(s)	Dotted black line	Run the successor task if the predecessor task returns one of the specified exit code(s). Format: Numeric. Use commas to list a series of exit codes; use hyphens to specify a range. Example: 1,5, 22-30.
Step Conditions	Dotted gray line	For predecessor z/OS tasks only: Run the successor task if the running predecessor z/OS task has a step end matching the specified Step Condition(s).

Connector Graphics for All Condition Types, below, illustrates a Workflow containing connectors for all condition types.

Conditions per Task Type

The following table identifies the dependency conditions that are supported for each type of task:

Task Type	Success	Failure	Success/Failure	Step Condition(s)	Exit Code(s)
Workflow
Linux/Unix
Windows
z/OS
Universal Command
SAP
File Transfer
Manual
Timer
SQL
Stored Procedure
Email
Web Service
Recurring
Task Monitor
Agent File Monitor
Remote File Monitor
System Monitor
Variable Monitor
Application Control
Email Monitor
Universal

Specifying a Condition

To specify a dependency condition for a connection between a predecessor and successor task:

Step 1	Hover your mouse over the connection to view the currently selected condition. If you want to change the condition, right-click the connection to display a Connector Actions menu.
Step 2	Select Conditions. The Conditions dialog displays.
Step 3	Specify a condition (as supported for each task type).
Step 4	If you selected Step Condition(s) for a connection to a predecessor z/OS task, click the View/Edit... button to display a Step Conditions dialog that lets you define the step conditions. Using the field descriptions below as a guide, complete the fields and click OK.
Step 5	Click OK on the Conditions dialog.
Step 6	To see the condition that is specified for a connection, hover your cursor over the connector (see Connector Graphics for All Condition Types, below).

Step Conditions

A Step Condition - for a z/OS task only - is an intermediate condition that is evaluated immediately after each z/OS step end. In other words, it does not specify a condition to be met when the z/OS task completes.

In this way, Step Conditions allow a successor task to run before its predecessor task has completed. The successor task may require only that a step in the z/OS task completes, not the entire task.

Step Condition connectors display in gray to distinguish the difference between intermediate Step Conditions and task completion Conditions.

On z/OS task instance completion - specifically, Failed, Success or Finished - Step Conditions are not relevant and are not evaluated. If one or more non-Step Condition dependencies were satisfied, all remaining unsatisfied dependencies, including Step Condition dependencies, become unreachable and their associated paths are skipped.

Step Condition(s) Field Descriptions

The following table describes the fields on the Step Condition(s) dialog.

Field Name	Description
Step	Job step name to match. A blank value or an asterisk (``) will match any job step name. Generic matching characters asterisk (``) and question mark (`?`) match zero or more characters and one character, respectively.
Procedure	Procedure step name to match. A blank value or an asterisk (``) will match any procedure step name. Generic matching characters asterisk (``) and question mark (`?`) match zero or more characters and one character, respectively.
Program	Program name to match. A blank value or an asterisk (``) will match any program name. Generic matching characters asterisk (``) and question mark (`?`) match zero or more characters and one character, respectively.
Condition Codes	Conditions codes are integer return codes from the program or ABEND codes. Integer return codes are specified as a comma-separated list of integer values or ranges. Ranges are specified with a dash (`-`) separating the lower and upper bounds of the range. The z/OS job step return code range is 0-4095. ABEND codes are specified directly as either a user ABEND or a system ABEND. The ABEND code must be specified verbatim including leading zeroes. For example: 1,6-4095,Sxxx,Unnnn,JCLERR

Connector Graphics for All Condition Types

The following illustration shows the connector formats for all condition types and the details that displays for each condition type (in this case, Success/Failure) when you hover your cursor over the connector.

Creating Conditional Paths

The Controller allows you to specify a separate processing path for each possible condition between a predecessor task and a successor task. The Controller selects the appropriate conditional path when the predecessor task goes to a finished status (Success or Failure). As a result, at least one successor dependency is satisfied and at least one successor dependency is not satisfied.

For example, you could specify a conditional path containing a group of tasks that will run if the predecessor task goes to Success, and a second conditional path containing a group of tasks that will run if the predecessor task goes to Failure. When the predecessor task has run to completion, the tasks in the path whose condition meets the condition of the predecessor task will run, and the tasks in the path whose condition does not meet the condition of the predecessor task will go to a Skipped status.

Further examples:

Example 1
Task A is at the top of the Workflow. Three conditional paths have been specified for Task A: one for Failure and two for Success. Task A executes and goes to Success status. The Controller places all of the tasks in the Failure conditional path into Skipped status and the tasks in the two Success conditional paths begin running.

Example 2
Task A is at the top of the Workflow. Two conditional paths have been specified: one for exit codes 1 through 10, the second for exit codes 11 through 20.

If Task A completes with exit code 5, the tasks in the first path run and the second path is skipped.
If Task A completes with exit code 15, the first path is skipped and the tasks in the second path run.
If Task A completes with exit code 25, neither condition is satisfied and both paths remain in Waiting status.

Conditions for Multiple Connections

If a task is connected to multiple predecessor tasks, that successor task remains in Waiting status until the condition of each of its immediate predecessor tasks is evaluated. If all of its immediate predecessor tasks have been Skipped, the successor task is Skipped. If at least one of its immediate predecessor tasks has run to completion, the successor task will run if the specified dependency condition matches the condition of the predecessor task.

For example, if a task has four immediate predecessor tasks, and three of the immediate predecessor tasks have been Skipped and the fourth predecessor task has failed, and the dependency condition between the fourth predecessor task and the successor task is Failure, the successor task will run. (Likewise, if the fourth predecessor task has run to Success, and the dependency condition between the fourth predecessor task and the successor task is Success, the successor task will run.)

The status of the tasks in the conditional paths leading to the immediate predecessor tasks do not affect whether or not the successor tasks will run. All tasks leading to an immediate predecessor tasks do not have to have run in order for the successor task to run.

Moving Workflow Elements

After you have positioned tasks and connectors on the Workflow Editor canvas, you can move these elements as needed.

Move a Single Task

Click a task and drag it to a new location. If the task has any connectors attached, they remain connected, and lengthen or shorten as necessary. |

Move a Single Connector

Step 1	Click the connector you want to move.
Step 2	Position your cursor over either end of the connector (at the predecessor or successor task) and, when the cursor changes to a "pointing hand" icon, drag that end of the connector so that it connects to a different task.
Step 3	As desired, repeat Step 2 for the other end of the connector.

Move a Group of Tasks and Connectors

Step 1	Click the Select icon or either Connect icon.
Step 2	Position the cursor near the group that you want to move.
Step 3	Click the Workflow Editor canvas and begin dragging. A blue shaded box appears. This identifies the selection area.
Step 4	Drag the selection area over the tasks you want to select, as shown in the following example:
Step 5	When you have selected the group of tasks and connectors that you want to move, release the mouse. The tasks and connectors included in the group are highlighted, as shown:
Step 6	Hover your cursor over any element in the group until the Move cursor displays, then click that element and drag the group to the new location. All selected elements are moved.
Step 7	To deselect the group, click elsewhere in the Workflow Editor canvas.

Note

You also can use Ctrl+click to select a group of elements or a selection of individual elements and drag them to a new location.

Deleting Workflow Elements

Step 1	Click an element, drag your cursor across the Workflow Editor canvas to select a group of elements, or use Ctrl+click to select one element, a group of elements, or a selection of individual elements. (You cannot drag your cursor across the Workflow Editor canvas in Pan mode.)
Step 2	Click the Delete icon. The selected element or group of elements is deleted.

Copying Workflow Elements

Step 1	Click an element, drag your cursor across the Workflow Editor canvas to select a group of elements, or use Ctrl+click to select one element, a group of elements, or a selection of individual elements. (You cannot drag your cursor across the Workflow Editor canvas in Pan mode.)
Step 2	Click the Copy icon to create a copy of the selected elements.
Step 3	Click the Paste icon to paste the copied element(s) into the Workflow next to the original element(s).
Step 4	Click the copied element (or any element in a copied group) and drag it to a new location. Note: You can paste copied (or cut) element(s) into the same Workflow or into the Workflow Editor of any other Workflow.

Undoing and Redoing Workflow Changes

To undo the most recent change, click the Undo icon. To redo a change you just undid, click the Redo icon.

Zooming In and Out

Several features are available for zooming in and out on large Workflows:

Click the Fit icon to fit the entire Workflow onto the display.
Click the Zoom In icon to increase the size of the Workflow (to view details).
Click the Zoom Out icon to decrease the size of the Workflow (to view the entire Workflow)
Click the Actual Size icon to return the Workflow to its actual (original) size.
Click the Zoom icon to enter a zoom percentage.

Panning Around in Large Workflows

For large Workflows that cannot be viewed entirely on your screen, you can pan around from area to area.

Two methods are provided:

Pan mode
Outline tool (in any mode)

Pan Mode Method

Step 1	Click the Pan icon to enter Pan mode.
Step 2	Click the Workflow Editor canvas and drag the Workflow so that it displays the area you want to work on.

Outline Tool Method

Step 1	Click the Outline icon icon to open the Outline window.
Step 2	In the Outline window, move and/or resize the blue box to identify the area of the Workflow you want to work on. The display repositions itself as indicated in the Outline window.

Note

You also can move to different areas of a Workflow by using the Find in Workflow... tool.

Workflow Coordinates

If you use Pan mode (or Find in Workflow...) to view different areas of a Workflow, the Controller preserves the coordinates of the last area that you viewed. If you leave the Workflow and return to it in the same browser session, the last viewed area of the Workflow displays.

To restore the displayed Workflow to its default, top-left position, you can either:

Right-click anywhere in the Workflow Editor canvas to display a pop-up menu and click Pan To Top.
Start a new browser session.

Automatically Formatting a Workflow

You can apply automatic formatting to your Workflow. This process does not change any connections or content, but reorganizes the Workflow into a more legible display.

To create a horizontal layout, click the Horizontal Layout icon.
To create a vertical layout, click the Vertical Layout icon.

Displaying Workflow Documentation

To display documentation on monitoring Workflows, click the Help icon.

Displaying Processing Messages

While a Workflow is running, you can click the Console icon to display processing messages. For more details, see Monitoring Workflows.

Saving the Workflow

Click the Save icon.

Switching Between Workflows

You can switch between Workflows without using the navigation pane (see Designing, Modifying, or Viewing Multiple Workflows.

Adding Skip/Run Criteria for Specific Tasks

You can add special instructions that specify conditions under which a specific task (or sub-Workflow) within the Workflow should be run or skipped. The Controller evaluates these instructions when determining whether to run each task within a Workflow.

For example, you might want to skip a specific task in a Workflow on a certain day or date, or you might want to run a specific task only if a certain variable is set to a specific value.

Note

Calendar-based criteria are always evaluated using the task instance Trigger Time (or the task instance Created time, if the workflow was launched manually).

When a workflow is launched or triggered, the Task Run Criteria provide a mechanism to decide whether a specific task (or sub-Workflow) within the Workflow should be run or skipped. If no Task Run Criteria are specified, a task will always run when the Workflow is launched or triggered. If Task Run Criteria are specified to run or skip a task, these will be evaluated as follows:

Skip criteria will run the task unless the skip criteria is met. For example, a workflow is triggered every business day, and a task has a skip criteria of Tuesday. The task will run Monday, Wednesday, Thursday, and Friday. The task will not run on Tuesday.
Run criteria will only run the task when the run criteria is met. For example, a workflow is triggered every business day and a task has a run criteria of Tuesday, The task will run on Tuesday. The task will be skipped on Monday, Wednesday, Thursday, and Friday.

Multiple conditions can be specified in a single Task Run Criteria definition. In this case, all of the conditions need to be met. For example, if in a single Task Run Criteria you specify for the task to run on a specific day of Tuesday, and if the variable RUN_ME resolves to the value YES at Run Time, the task will be skipped unless both of these conditions are true.

When multiple Task Run Criteria definitions are specified for a single task, these are evaluated independently.

Note

If skip criteria and run criteria both are met (true) on a given day, the skip criteria will take precedence.

Creating Skip/Run Criteria

Step 1	Display the Details of the Workflow for which you want to specify skip/run criteria.
Step 2	Click the Task Run Criteria tab. The Task Run Criteria list displays a list of any existing skip/run criteria for that task.
Step 3	Click New. Task Run Criteria Details displays:
Step 4	Using the field descriptions, below, as a guide, complete the fields as needed. For example, to tell the Controller not to run a specific task on business days or holidays, select Skip Criteria in the Type field, select the task and enable Business Day and Holiday.
Step 5	Click the Save button to save the record.

Skip/Run Criteria Field Descriptions

The following table provides descriptions for each field in the Task Run Criteria Details.

Field Name	Description
Type	User-defined; indicates whether this is providing instructions on when to run or not run the task. Options: Run Criteria - Provides instructions on when to run the task. Skip Criteria - Provides instructions on when to skip the task.
Description	Unable to render {include} The included page could not be found.
Task	User-defined; task for which you are specifying run or skip criteria. Select a task from the drop-down list of all tasks in this Workflow.
Vertex ID	Vertex ID of the task selected in the Task field. Each task within a Workflow has a unique Vertex ID, which distinguishes it from other tasks of the same name, if any.
Business Day	If enabled, the task runs or skips on all business days.
Holiday	If enabled, the task runs or skips on holidays.
Adjustment	If Holiday is enabled; Specification for adjusting a Holiday by a less or plus number of days or business days. Options: -- None -- Less Plus Default is – None --
Adjustment Amount	If Adjustment is Less or Plus; Number of days or business days to adjust a Holiday. Default is 1.
Adjustment Type	If Adjustment is Less or Plus; Type of day by which to adjust a Holiday. Options: Day Business Day Default is Day.
Specific Day(s) – Sunday through Saturday	If enabled, the task runs or skips on the day(s) you select in the right-hand column.
Custom Day	If enabled, the task runs or skips on the day you select in the Custom Day Choice field. Note The Custom Day and Custom Day Choice fields display in the Task Run Criteria Details only if the Custom Day Global Permitted Universal Controller system property is set to true (the default).
Custom Day Choice	If Custom Day is enabled, select the custom day for which you are specifying run or skip criteria. Enter the name of an existing Custom Day, select a Custom Day from the drop-down list of all existing Custom Days, or click the Details icon to create a new Custom Day. Only a global custom day can be selected for a Custom Day Choice. Use Complex run criteria to use a local custom day. If a workflow is launched using a calendar which does not contain the custom day specified for the Custom Day Choice, the following applies: Note You cannot use a custom day defined as a period as part of the task run criteria.
Complex	If enabled, the task runs or skips on the day(s) indicated in the Adjective, Noun, and Qualifier fields.
Adjective	If Complex is enabled, you can use this field to specify which in a series of days you want to select. Used in conjunction with the Noun, Qualifier, and Nth Amount (if Adjective = Nth) fields. For example, to specify "the 15th business day of the month," select Adjective: Nth, Noun: Business Day, Qualifier: Month, Nth Amount: 15. Options: Every 1st 2nd 3rd 4th Nth Last
Noun(s)	If Complex is enabled, you can use this field to specify the type of day(s) you want to select. Used in conjunction with the Adjective, Qualifier, and Nth Amount (if Adjective = Nth) fields. For example, to specify "the 1st business day of the month," select Adjective: 1st, Noun: Business Day, Qualifier: Month. Options: Sunday through Saturday Day = any day Business Day = The business days specified in the calendar selected in the Workflow definition Default Calendar field. Custom Days specified in the calendar selected in the Workflow definition Default Calendar field. If the Custom Day Strict Mode Universal Controller system property is set to true, the calendar used for the Workflow must contain the custom day that you specify in the Custom Day Choice field; otherwise, the task will not run or skip as expected on the custom day: If you launch a Workflow manually, the Workflow Default Calendar is used. If a Default Calendar is not specified, the System Default calendar is used. If you launch a Workflow using a trigger, the calendar specified in the trigger is used unless Override Inherited Calendar is enabled.
Qualifier(s)	If Complex is enabled, you can use this field to specify the period(s) for your selection formula. Used in conjunction with the Adjective, Noun, and Nth Amount (if Adjective = Nth) fields. For example, to specify "the 1st business day of the month," select Adjective: 1st, Noun: Business Day, Qualifier: Month. Options: Month Year Week Quarter January through December Custom Period (see Creating Custom Days)
Nth Amount	If Adjective = Nth; Sequential occurrence of the day selected in Noun within the selected Qualifier.
Adjustment	If Complex is enabled; Specification for adjusting a complex day by a less or plus number of days or business days. Options: -- None -- Less Plus Default is – None --
Adjustment Amount	If Adjustment is Less or Plus; Number of days or business days to adjusting a complex day. Default is 1.
Adjustment Type	If Adjustment is Less or Plus; Type of day by which to adjust a complex day. Options: Day Business Day Default is Day.
Variable	If enabled, instructs the Controller to run or not run the task, depending on the value of a specific variable. Used in conjunction with fields: Evaluate At, Name, Operator, and Value.
Evaluate At	If Variable = enabled; Allows you to specify when you want the Controller to evaluate the variable. Options: Note Evaluate At is applicable only to Variable criteria (it is hidden until the Variable field is enabled). Evaluate At has no impact on other criteria, which will resolve the same way whether the Evaluate At value is Trigger Time or Run Time; calendar-based criteria is always evaluated using the task instance Trigger Time (or the task instance Created time, if the workflow was launched manually).
Name	If Variable = enabled; Specifies the name of the variable being evaluated. The variable does not need to exist when this record is created.
Operator	If Variable = enabled; Allows you to select the operator to be used in the evaluation. Options: =, !=, >, >=, <, <=, regex (regular expression).
Value	If Variable = enabled; Allows you to specify the value or regular expression (up to 255 alphanumeric characters) that the Controller should look for when evaluating the variable.
Buttons	This section identifies the buttons displayed above and below the Task Run Criteria that let you perform various actions.
Save	Saves a new record in the Controller database.
Update	Unable to render {include} The included page could not be found.
New	Displays empty (except for default values) Details for creating a new Database Connection.
Delete	Unable to render {include} The included page could not be found.
Refresh	Refreshes any dynamic data displayed in the Details.
Close	For pop-up view only; closes the pop-up view of this Database Connection.

Copying Skip/Run Criteria

You can copy the skip/run criteria of a task in a Workflow and copy it to any other task in that Workflow.

Step 1	Display the Details of the Workflow task for which you want to copy the skip/run criteria of one of its tasks.
Step 2	Click the Task Run Criteria tab. The Task Run Criteria list displays a list of any existing skip/run criteria for that task.
Step 3	Click the Details icon for the skip/run criteria that you want to copy. The Task Run Criteria Details for that task displays.
Step 4	Click the Task field drop-down list to display a list of all tasks in the Workflow.
Step 5	Select a task from the drop-down list and then right-click anywhere in the Task Run Criteria Details to display an Action menu.
Step 6	Click Insert to copy the skip/run criteria to the selected task and re-display the Task Run Criteria list, or click Insert & View to copy the skip/run criteria to the selected task and continue viewing the Task Run Criteria Details for that task, which you can Update or Close.

Specifying When a Workflow Runs

As with other task types, you can run a Workflow manually or specify triggers that run the Workflow task automatically based on times or events.

You also can specify skip and run criteria for specific tasks within the Workflow.

Monitoring Workflow Execution

You can monitor all Controller activity from the Activity Monitor.

Modifying an Existing Workflow

Step 1	From the Automation Center navigation pane, select Tasks > Workflow Tasks. The Workflow Tasks list displays.
Step 2	Click the Task Name of the Workflow task that you want to modify. Workflow Task Details for that task displays.
Step 3	Click Edit Workflow to display the Workflow Editor.
Step 4	Modify the Workflow and click the Save icon.

Cloning a Workflow

You can clone a Workflow to create a copy of it and a copy of every task in the Workflow. Optionally, cloning a Workflow will also create a copy of its Virtual Resources.

Step 1	From the Automation Center navigation pane, select Tasks > Workflow Tasks. The Workflow Tasks list displays.
Step 2	Right-click the Workflow that you want to clone, or open the Workflow and right-click anywhere in the Details, to display an Action menu for that Workflow.
Step 3	Click Clone... in the Action menu to display the Clone Workflow Task pop-up:
Step 4	Enter a Prefix and/or Suffix, which will be applied to the Workflow clone and all of its tasks.
Step 5	If you want to clone all Virtual Resources of the Workflow, click the Clone Virtual Resources check box.
Step 6	Click Submit to clone the Workflow. The Workflow clone will display in the Workflows list. In the Workflow Editor, each task clone will have the same prefix and/or suffix as the Workflow clone, and the task clones will display in the task lists for those task types.

Deleting a Workflow

Step 1	From the Automation Center navigation pane, select Tasks > Workflow Tasks. The Workflow Tasks list displays.
Step 2	Right-click the Workflow that you want to delete to display an Action menu. (If you want to delete multiple Workflows, use Ctrl+click to select each one and then right-click any of the selected Workflows.)
Step 3	Click Delete.

Finding a Task in a Workflow

For any Workflow task, or any Workflow task instance (running or complete), you can find the location of any task (or multiple tasks) within that Workflow:

Step 1	On the Workflow Tasks list, right-click a Workflow task to display an Action menu.
Step 2	Click Edit Workflow to display the Workflow Editor for that Workflow.
Step 3	Right-click any white space in the Workflow Editor canvas. A pop-up menu displays.
Step 4	Click Find in Workflow... to display a Find in Workflow dialog.
Step 5	Select an operator for the search (contains, starts with, or equals), enter the full or partial name of the task(s) that you want to find, and click OK. The Controller locates and displays the first task within the Workflow that matches the search criteria. Click the Next and/or Previous buttons to find any other tasks that match the search criteria.

Note

You also can locate a task in a Workflow by using the Pan tool.

Workflow Coordinates

If you use Find in Workflow... (or Pan mode) to view different areas of a Workflow, the Controller preserves the coordinates of the last area that you viewed. If you leave the Workflow and return to it in the same browser session, the last viewed area of the Workflow displays.

To restore the displayed Workflow to its default, top-left position, you can either:

Right-click any white space in the Workflow Editor canvas to display a pop-up menu and click Pan To Top.
Start a new browser session.

Viewing a Task Instance in a Workflow from the Activity Monitor or Task Instances List

From the Activity Monitor or Task Instances list, you can view the location and status of a task instance in a Workflow.

Step 1	Open the Activity Monitor or Task Instances List.
Step 2	Right-click a task instance to display the Action menu.
Step 3	Click View in Workflow. The parent Workflow of the selected task instance displays, with that task instance highlighted.

Note

You also can view any predecessor or successor task instance of a task instance in a Workflow from the View Predecessors/Successors pop-up dialog.

Inserting a Task in an Active Workflow

After a Workflow has been launched, you can insert a new task (including a Workflow task) into an active Workflow task instance.

You can insert the task as a predecessor or successor of another task instance within the Workflow instance using the Insert Task as Predecessor or Insert Task as Successor command, respectively. Alternatively, you can use the Insert Task... command to insert a task with any number of predecessors and successors.

If you are inserting a Workflow task into an active Workflow task instance, and that Workflow task (or any sub-Workflow within that Workflow task) has the Calculate Critical Path field enabled, that field will be disabled automatically. However, if the active Workflow task instance has the Calculate Critical Path field enabled, and any task (including a Workflow task) that you are inserting into the Workflow task instance impacts the Critical Path of the Workflow task instance, the Critical Path will adjust accordingly.

See the following sections:

Insert Non-Workflow Task as Predecessor

Step 1	In the Workflow Monitor, right-click a task instance.
Step 2	Click Insert Task As Predecessor.... The Task Insert > Task Selection dialog displays.
Step 3	Find the task you want to insert (see Searching For and Adding Tasks) and drag the task's icon onto the Workflow Editor canvas where you would like it to be inserted. The Controller inserts the task as a predecessor to the task instance that you right-clicked, and the inserted task will start to run when all of its dependencies (for example, virtual resources) have been met. If the selected task instance had not already started, it will wait until the inserted task completes and all of its other dependencies have been satisfied. For inheritance of actions on Defined status, refer to Universal Controller property Inherit Actions On Defined For Insert Task.
Step 4	By default, the inserted task will inherit the Trigger Time of the parent Workflow. If the Trigger Time of the parent Workflow is undefined, the Launch Time will be inherited as the Trigger Time instead. If you do not want the task to inherit the Trigger Time of the parent Workflow, use the Insert Task command to insert the task and de-select the Inherit Trigger Time field.

Insert Workflow Task as Predecessor

Step 1	In the Workflow Monitor, right-click a task instance.
Step 2	Click Insert Task As Predecessor.... The Task Insert > Task Selection dialog displays.
Step 3	Find the Workflow that you want to insert (see Searching For and Adding Tasks) and drag the Workflow's icon onto the Workflow Editor canvas where you would like it to be inserted. The Task Insert > Predecessor/Successor Selection dialog displays and identifies the task that you right-clicked, which the selected Workflow will be the Predecessor of.
Step 5	Optionally, you can modify the selection of Predecessors and Successors before proceeding.
Step 6	By default, the inserted Workflow will inherit the Trigger Time of the parent Workflow. If the Trigger Time of the parent Workflow is undefined, the Launch Time will be inherited as the Trigger Time instead. Therefore, by default, for task instances within an inserted Workflow, Run Criteria will be evaluated using the inherited Trigger Time. If you do not want the inserted Workflow to inherit the Trigger Time of the parent Workflow, de-select the Inherit Trigger Time field (by default, it is pre-selected). For task instances within an inserted Workflow that did not inherit the Trigger Time of the parent Workflow, Run Criteria will be evaluated using the Created Time.
Step 7	Click OK. The Controller inserts the Workflow task as a predecessor to the selected task instance. For inheritance of actions on Defined status, refer to Universal Controller property Inherit Actions On Defined For Insert Task.

Insert Non-Workflow Task as Successor

Step 1	In the Workflow Monitor, right-click a task instance.
Step 2	Click Insert Task As Successor.... The Task Insert > Task Selection dialog displays.
Step 3	Find the task you want to insert (see Searching For and Adding Tasks) and drag the task's icon onto the Workflow Editor canvas where you would like it to be inserted. The Controller inserts the task as a successor to the task instance that you right-clicked. When that task instance completes, the inserted task will start to run, assuming that all of its dependencies (for example virtual resources) have been met. For inheritance of actions on Defined status, refer to Universal Controller property Inherit Actions On Defined For Insert Task.
Step 4	By default, the inserted task will inherit the Trigger Time of the parent Workflow. If the Trigger Time of the parent Workflow is undefined, the Launch Time will be inherited as the Trigger Time instead. If you do not want the task to inherit the Trigger Time of the parent Workflow, use the Insert Task command to insert the task and de-select the Inherit Trigger Time field.

Insert Workflow Task as Successor

Step 1	In the Workflow Monitor, right-click a task instance.
Step 2	Click Insert Task As Successor.... The Task Insert > Task Selection dialog displays.
Step 3	Find the Workflow that you want to insert (see Searching For and Adding Tasks) and drag the Workflow's icon onto the Workflow Editor canvas where you would like it to be inserted. The Task Insert > Predecessor/Successor Selection dialog displays and identifies the task that you right-clicked, which the selected Workflow will be the Successor of.
Step 5	Optionally, you can modify the selection of Predecessors and Successors before proceeding.
Step 6	By default, the inserted Workflow will inherit the Trigger Time of the parent Workflow. If the Trigger Time of the parent Workflow is undefined, the Launch Time will be inherited as the Trigger Time instead. Therefore, by default, for task instances within an inserted Workflow, Run Criteria will be evaluated using the inherited Trigger Time. If you do not want the inserted Workflow to inherit the Trigger Time of the parent Workflow, de-select the Inherit Trigger Time field (by default, it is pre-selected). For task instances within an inserted Workflow that did not inherit the Trigger Time of the parent Workflow, Run Criteria will be evaluated using the Created Time.
Step 7	Click OK. The Controller inserts the Workflow task as a successor to the selected task instance. For inheritance of actions on Defined status, refer to Universal Controller property Inherit Actions On Defined For Insert Task.

Insert Task with Multiple Predecessors/Successors

Step 1	In the Workflow Monitor, right-click any white space in the Workflow Editor canvas.
Step 2	Click Insert Task.... The Task Insert > Task Selection dialog displays.
Step 3	Find the task you want to insert (see Searching For and Adding Tasks) and drag the task's icon onto the Workflow Editor canvas where you would like it to be inserted.
Step 4	The Task Insert > Predecessor/Successor Selection dialog displays.
Step 5	Select zero or more predecessors and zero or more Successors for the inserted task.
Step 6	By default, the inserted task will inherit the Trigger Time of the parent Workflow. If the Trigger Time of the parent Workflow is undefined, the Launch Time will be inherited as the Trigger Time instead. For task instances within an inserted Workflow, Run Criteria will be evaluated using the inherited Trigger Time. If you do not want the inserted task to inherit the Trigger Time of the parent Workflow, de-select the Inherit Trigger Time field (by default, it is pre-selected). For task instances within an inserted Workflow that did not inherit the Trigger Time of the parent Workflow, Run Criteria will be evaluated using the Created Time.
Step 7	Click OK. The Controller inserts the task as a successor to the selected predecessor task instance(s) and as a predecessor to the selected successor task instance(s). Note Any predecessor task that is in a SUCCESS, FINISHED, or SKIPPED status will not prevent the inserted task from running. For inheritance of actions on Defined status, refer to Universal Controller property Inherit Actions On Defined For Insert Task.

Viewing Children Tasks

You can view workflow children tasks for a Workflow task and a Workflow task instance.

Viewing Children Tasks of a Workflow Task

You can view all children tasks of a Workflow task (and children tasks of any sub-workflow) from any of the following locations:

All Tasks list	Right-click any workflow task in the list to access the View Children action from the Workflow Task Commands menu.
Workflow Tasks List	Right-click any workflow task in the list to access the View Children action from the Workflow Task Commands menu.
Workflow Task Details	Right-click anywhere in the Details to access the View Children action from the Workflow Task Commands menu.
Workflow Editor	Right-click any white-space or workflow task vertex to access the View Children action.
Workflow Forecast	Right-click any white-space or workflow task vertex to access the View Children action.

Viewing Children Tasks of a Workflow Task Instance

You can view all children tasks of a Workflow task instance (and children tasks of any sub-workflow) from any of the following locations:

Activity Monitor	Right-click any workflow task instance in the list to access the View Children action from the Workflow Task Commands menu.
Task Instances list	Right-click any workflow task instance in the list to access the View Children action from the Workflow Task Commands menu.
Workflow Task Instance Details	Right-click anywhere in the Details to access the View Children action from the Workflow Task Commands menu.
Workflow Monitor	Right-click any white-space or workflow task instance vertex to access the View Children action.
Workflow Task Details	Click the Instances tab of any workflow task, then right-click any workflow task instance in the list to access the View Children action from the Workflow Task Commands menu.

Viewing a Workflow Tree

You can view a Workflow tree (that is, a hierarchical display of the workflow and its tasks) for a Workflow task and a Workflow task instance.

Note

You can apply the same layout to a Workflow Tree as you can to any list.

Viewing a Workflow Tree for a Workflow Task

You can view a Workflow Tree for a workflow task from any of the following locations.

All Tasks list	Right-click any workflow task in the list to access the View Tree action from the Workflow Task Commands menu.
Workflow Tasks List	Right-click any workflow task in the list to access the View Tree action from the Workflow Task Commands menu.
Workflow Task Details	Right-click anywhere in the Details to access the View Tree action from the Workflow Task Commands menu.
Workflow Editor	Right-click any white-space or workflow task vertex to access the View Tree action.
Workflow Forecast	Right-click any white-space or workflow task vertex to access the View Tree action.
Tree View	Right-click any workflow task within a Tree View to access the View Tree action from the Workflow Task Commands menu. The Tree View for that workflow task will display in a new tab.

Viewing a Workflow Tree for a Workflow Task Instance

You can view a Workflow Tree for a workflow task instance from any of the following locations.

Activity Monitor	Right-click any workflow task instance in the list to access the View Tree action from the Workflow Task Commands menu.
Task Instances list	Right-click any workflow task instance in the list to access the View Tree action from the Workflow Task Commands menu.
Workflow Task Instance Details	Right-click anywhere in the Details to access the View Tree action from the Workflow Task Commands menu.
Workflow Monitor	Right-click any white-space or workflow task instance vertex to access the View Tree action.
Workflow Task Details	Click the Instances tab of any workflow task, then right-click any workflow task instance in the list to access the View Tree action from the Workflow Task Commands menu.
Tree View	Right-click any workflow task instance within a Tree View to access the View Tree action from the Workflow Task Commands menu. The Tree View for that workflow task instance will display in a new tab.

Note

If the Critical Path Calculations Permitted Universal Controller system property is set to true, the Details icon for any task instance on the Critical Path will display in red.

Expanding/Collapsing the Tree View

To view the child tasks of any sub-Workflow in a tree, click the + to expand the tree view for that sub-Workflow.

To hide the child tasks of any sub-Workflow in a tree, click the - to collapse the tree view for that sub-Workflow.

Additionally, you can use the Expand, Expand All, Collapse, and Collapse All buttons in the toolbar along the top of the Tree View.

Expand	Expands any collapsed and visible workflow nodes one level.
Expand All	Expands all nodes in the tree.
Collapse	Collapses one level of workflow nodes, starting from the open workflow node at the deepest level.
Collapse All	Collapses all open workflow nodes, excluding the root-level workflow node.

Refreshing the Tree View

To refresh the Tree View, click the refresh icon in the toolbar along the top of the Tree View.

Viewing Task Predecessors/Successors

You can view all predecessors and successors of a task (or task instance) in a Workflow from:

Activity Monitor
Task Instances list
Workflow Editor
Workflow Monitor

You also can view all predecessors and successors of all tasks (or task instances) in a Workflow from:

Workflows list
Workflow task Details
Activity Monitor
Task Instances list
Workflow task instance Details

See the following sections:

Viewing Predecessors/Successors of a Single Task Instance from the Activity Monitor or Task Instances List

Step 1	Display the Activity Monitor or Task Instances List.
Step 2	Right-click a task instance to display an Action menu.
Step 3	Click View Predecessors/Successors to display the View Predecessors/Successors pop-up dialog. The View Predecessors/Successors pop-up dialog provides separate lists of all predecessor and successor task instances of the selected task instance in the Workflow, and status information for each of the predecessor/successor dependencies.
Step 4	If you want to view the task instance Details of any predecessor or successor task instance, click that task instance.
Step 5	If you want to view a predecessor or successor task instance of the selected task instance within the Workflow, right-click that task instance to display an Action menu, and then click View Workflow. The parent Workflow of the selected task instance displays, with the selected predecessor or successor task instance highlighted.

Viewing Predecessors/Successors of a Single Task from the Workflow Editor

Step 1	Open the Workflow Editor.
Step 2	Right-click a task to display an Action menu.
Step 3	Right-click View Predecessors/Successors to display the View Predecessors/Successors pop-up. The View Predecessors/Successors pop-up provides separate lists of all predecessor and successor tasks of the selected task in the Workflow. Click a task in either list to select and center it within the Workflow Editor display. Double-click a task in either list to select and center it within the Workflow Editor display and close the View Predecessors/Successors pop-up. To resize the pop-up, hover over the window resize icon at the bottom right of the pop-up and drag the icon up or down.
Step 4	Click Edit if you want to edit the predecessors and successors of this task in the workflow.

Viewing Predecessors/Successors of a Single Task Instance from the Workflow Monitor

Note

To view more detailed task instance predecessor/successor information from the Workflow Monitor than is available via this procedure, see Viewing Detailed Status of Predecessors / Successors of a Single Task Instance from Workflow Monitor, below.

Step 1	Open the Workflow Monitor.
Step 2	Right-click a task instance to display an Action menu.
Step 3	Right-click View Predecessors/Successors to display the View Predecessors/Successors pop-up. The View Predecessors/Successors pop-up provides separate lists of all predecessor and successor task instances of the selected task instance in the Workflow. Click a task in either list to select and center it within the Workflow Monitor display. Double-click a task in either list to select and center it within the Workflow Monitor display and close the View Predecessors/Successors pop-up. To resize the pop-up, hover over the window resize icon at the bottom right of the pop-up and drag the icon up or down.

Viewing Detailed Status of Predecessors/Successors of a Single Task Instance from Workflow Monitor

Step 1	Open the Workflow Monitor.
Step 2	Double-click a task instance, or right-click and select View/Edit, to see its Task Instance Details.
Step 3	Right-click in the Task Instance Details to display an Action menu.
Step 4	Click View Predecessors/Successors to display a detailed view of the View Predecessors/Successors pop-up dialog. The View Predecessors/Successors pop-up dialog provides separate lists of all predecessor and successor task instances of the selected task instance in the Workflow, and status information for each of the predecessor/successor dependencies.
Step 5	If you want to view the task instance Details of any predecessor or successor task instance, click that task instance.
Step 6	If you want to view a predecessor or successor task instance of the selected task instance within the Workflow, right-click that task instance to display an Action menu, and then click View Workflow. The parent Workflow of the selected task instance displays, with the selected predecessor or successor task instance highlighted.

Viewing Predecessors/Successors of All Tasks in a Workflow Task

You can view the predecessors/successors of all tasks in a Workflow task from:

Workflow task on Workflows list
Workflow task Details
Workflow Editor
Workflow Forecast
Workflow Vertex in Workflow Editor and Workflow Forecast

Viewing predecessors/successors of all tasks in a Workflow task also lets you:

View task run criteria for all tasks in the Workflow.
View and/or download a list of predecessors/successors and task run criteria for all tasks in the Workflow.

Step 1	Display the Workflows list.
Step 2	Right-click a Workflow on the list and select View Children from the Action menu, or right-click within the task Details for the Workflow and select View Children. A list of child tasks within that Workflow displays.
Step 3	Click the Expand icon () next to any child task to display additional content for that child task, including Task Run Criteria, Predecessors, and Successors.
Step 4	For any Task Run Criteria on the list, click the Details icon to displays its record Details, or right-click it to display a menu of options available for that Task Run Criteria.
Step 5	For any Predecessor / Successor on the list, right-click it to display a menu of options available for that predecessor/successor.
Step 6	To view and/or save a list of all predecessors/successors and task run criteria for all child tasks within the Workflow, click the Download button on the View Children list.
Step 7	To print all currently displayed information on the list, click the Print button.
Step 8	To refresh all information on the list, click the Refresh button.

Viewing Predecessors/Successors of All Task Instances in a Workflow Task Instance

You can view the predecessors/successors of all task instances in a Workflow task instance from:

Activity Monitor
Task Instances list
Workflow task instance Details
Workflow Monitor

Step 1	Display the Activity Monitor or Task Instances list.
Step 2	Right-click a Workflow on the Activity Monitor or Task Instances list, or open a Workflow on the Activity Monitor or Task Instances list and then right-click within that Workflow Details, to display an Action menu.
Step 3	Select Workflow Task Commands > View Children to display a list of child task instances within that Workflow.
Step 4	Click the Expand icon () next to any child task instance to display additional content for that child task instance, including Predecessors and Successors.
Step 5	For any Predecessor / Successor on the list, right-click it to display a menu of options available for that predecessor/successor.
Step 6	To print all currently displayed information on the list, click the Print button.
Step 7	To refresh all information on the list, click the Refresh button.

Editing Task Predecessors/Successors

You can edit all predecessors and successors of a task in a Workflow from the Workflow Editor.

Editing predecessors and successors refers to adding predecessors and successors to a selected task and/or removing predecessors and successors from a selected task.

When adding a predecessor or successor through the Edit Predecessors/Successors dialog, the condition for the dependency will always be added as a Success condition, using a straight edge.

Conditions for any existing predecessor or successor dependencies will be preserved, assuming the predecessor or successor dependencies are not removed.

Step 1	Open the Workflow Editor.
Step 2	Right-click a Task to display an Action menu.
Step 3	Click Edit Predecessors/Successors to display the Edit Predecessors/Successors pop-up dialog. All predecessor and successor tasks of the selected task are highlighted; all other tasks are not highlighted. To resize the pop-up, hover over the window resize icon at the bottom right of the pop-up and drag the icon up or down. Note You also can choose to edit predecessors and successors from the View Predecessors/Successors dialog.
Step 4	To add a task as a predecessor or successor to the selected task, hold the Ctrl key and click the name of that task. To remove a task as a predecessor or successor to the selected task, hold the Ctrl key and click the name of that task.
Step 5	To add a task as a predecessor or successor to the selected task and remove all other predecessors or successors, click the name of that task.

Viewing Blocking Ancestors

You can view the blocking ancestors of task instances in a Workflow task instance from:

Activity Monitor
Task Instances list
Workflow Monitor

Only task instances that have not started (that is: Defined, Waiting or Held status) will qualify.

Step 1	Display the Activity Monitor, Task Instances list, or Workflow Monitor.
Step 2	Right-click a task instance on the Activity Monitor or Task Instances list, or open a Workflow and then right-click within that Workflow Details, to display an Action menu.
Step 3	Select View Blocking Ancestors... to display a View Blocking Ancestors dialog.
Step 4	Select how you want to view the blocking ancestors.
Step 5	Select Include Potential Matches if you want to include potential matches for blocking task instances. (By default, Include Potential Matches is not be selected.) If you select Include Potential Matches, the dialog will displays a Qualifying From Date field that lets you specify a date from which potential matches may qualify (in other words, how far back to look for a potential match).
Step 6	Select Expand/Inline Workflows if you want to expand/inline workflow task instances when displaying blocking ancestors as a List or Graph.
Step 7	Click Submit to display the blocking ancestors in your selected view.

View Blocking Ancestors - List

View Blocking Ancestors - Tree

View Blocking Ancestors - Graph

Forecasting a Workflow for a Specific Date/Time

You can display forecast information for a Workflow for a specific date and time. This provides a view of how a Workflow will look based on the Run/Skip Criteria for that date and time.

You can forecast a Workflow, without requiring a Trigger or Trigger forecast data, for any date/time within a span of five years in the past and 10 years in the future.

Step 1	From the Automation Center navigation pane, select Tasks > All Tasks or Tasks > Workflow Tasks.
Step 2	Display an Action menu either of three ways: Right-click the Workflow in the All Tasks or Workflow Tasks list. Open the Workflow and right-click in the Details. Open the Workflow, click the Triggers tab, and right-click a Trigger on the list.
Step 3	Click Forecast... to display a Forecast dialog.
Step 4	Select a Date, Time, Time Zone, and Calendar for when you want to forecast the Workflow (and all of its sub-Workflows, if any).By default, the Time Zone field is read-only and displays the time zone in the Forecast Time Zone field, since the Use Forecast Time Zone field is checked. ; The Forecast Time Zone field allows you to change what time zone this forecast of the Workflow will evaluate in. It defaults to the time zone of the Controller but can be modified to another time zone. Uncheck the Use Forecast Time Zone field if you want to enable the Time Zone field and enter a different time zone. The Forecast Time Zone and Use Forecast Time Zone fields allow the forecast to evaluate as if in one time zone, and also allow the Date and Time of the forecast to be based upon another time zone. The time zone associated with the Date and Time is used only for calculating the Date and Time at which the forecast starts. For example, a Forecast could be executed to run at a specific date and time with respect to Time Zone, and yet the Forecast itself will execute, and evaluate Run Criteria and Execution Restrictions, based upon the Forecast Time Zone.
Step 5	Select a View in which you want to display the Forecast: Workflow or List.
Step 6	If you selected Workflow View, a Calculate Critical Path field displays. Enable/disable this field depending on whether or not you want to calculate the Critical Path of the Workflow.
Step 7	Click Submit to display the Forecast in the selected View. Workflow View In the Workflow View, each task has a Run Criteria evaluation label:Critical Path Color Note You can choose to show or hide skipped tasks in the Workflow View of the Forecast just as you can on a Workflow Monitor. If Calculate Critical Path is enabled, skipped task instances are hidden, and the Show Skipped/Restore and Hide Skipped context-menu items are not available. If Calculate Critical Path is enabled, but you want to see skipped task instances, you can restore the standard view by clicking the Toggle Critical Path View icon in the Workflow Forecast toolbar (see Workflow Editor Toolbar for a description of the tools in this toolbar). The Workflow View lets you navigate into sub-Workflows (by double-clicking them) and back to the parent Workflow (via the Go to Parent icon). List View The List View displays forecast data for the Workflow and all of its tasks, including all sub-Workflows and their tasks.

Forecasting with Override Calendar Options

A workflow being forecasted by the Forecast... command will use the Calendar specified on the Forecast... dialog; the Override Calendar options (Default Calendar and Override Inherited Calendar) on the workflow being directly forecasted do not apply.

Any sub-workflow within the workflow being directly forecasted will honour its own Override Calendar options. If no Override Calendar options are defined, the command-specified Calendar is used.

If the sub-workflow within the workflow being directly forecasted contains a deeper sub-workflow, that deeper sub-workflow will honour its own Override Calendar options or, if none are specified, the Override Calendar options of a parent workflow (excluding the directly forecasted workflow for which the Calendar was specified on the Forecast... command). If no Override Calendar options are defined, the command-specified Calendar is used.

Modifying Tasks in a Workflow

You can make the following modifications for tasks in a Workflow:

Creating and Maintaining Workflows

Overview

Built-In Variables

Creating a Workflow Task

Workflow Task Details

Workflow Task Details Field Descriptions

Viewing a Workflow Task Instance

Workflow Task Instance Details

Workflow Task Instance Details Field Descriptions

Designing a Workflow

Designing, Modifying, or Viewing Multiple Workflows

Workflow Editor Modes

Workflow Editor Toolbar

Workflow Editor Tools

Searching For and Adding Tasks

Task Details

Task Actions

Task Properties

Task Actions for Workflow

Create and Insert Task

Specifying Connections

Connector Details

Connector Actions

Connector Properties

Specifying Conditions on Connections

Conditions per Task Type

Specifying a Condition

Step Conditions

Step Condition(s) Field Descriptions

Connector Graphics for All Condition Types

Creating Conditional Paths

Conditions for Multiple Connections

Moving Workflow Elements

Move a Single Task

Move a Single Connector

Move a Group of Tasks and Connectors

Deleting Workflow Elements

Copying Workflow Elements

Undoing and Redoing Workflow Changes

Zooming In and Out

Panning Around in Large Workflows

Pan Mode Method

Outline Tool Method

Workflow Coordinates

Automatically Formatting a Workflow

Displaying Workflow Documentation

Displaying Processing Messages

Saving the Workflow

Switching Between Workflows

Adding Skip/Run Criteria for Specific Tasks

Creating Skip/Run Criteria

Skip/Run Criteria Field Descriptions

Copying Skip/Run Criteria

Specifying When a Workflow Runs

Monitoring Workflow Execution

Modifying an Existing Workflow

Cloning a Workflow

Deleting a Workflow

Finding a Task in a Workflow

Workflow Coordinates

Viewing a Task Instance in a Workflow from the Activity Monitor or Task Instances List

Inserting a Task in an Active Workflow

Insert Non-Workflow Task as Predecessor

Insert Workflow Task as Predecessor

Insert Non-Workflow Task as Successor

Insert Workflow Task as Successor

Insert Task with Multiple Predecessors/Successors

Viewing Children Tasks

Viewing Children Tasks of a Workflow Task

Viewing Children Tasks of a Workflow Task Instance

Viewing a Workflow Tree

Viewing a Workflow Tree for a Workflow Task

Viewing a Workflow Tree for a Workflow Task Instance

Expanding/Collapsing the Tree View

Refreshing the Tree View

Viewing Task Predecessors/Successors

Viewing Predecessors/Successors of a Single Task Instance from the Activity Monitor or Task Instances List

Viewing Predecessors/Successors of a Single Task from the Workflow Editor

Viewing Predecessors/Successors of a Single Task Instance from the Workflow Monitor

Viewing Detailed Status of Predecessors/Successors of a Single Task Instance from Workflow Monitor