Overview
The command line syntax for each execution of the CLI command, uagcmd, must specify a single CLI function, required / optional Global parameters, and required / optional function-specific parameters. You must use the required Global parameters to connect to OMS Servers and to log on to a Controller (User ID and Password).
Universal Controller supports the following CLI functions for Tasks, which are listed alphabetically on this page.
Syntax, parameters, and examples for each function are provided.
Cancel Task
Description | Cancels the specified task instance.
See Cancelling a Task Instance for a description of behavior and restrictions. |
|---|
Syntax | uagcmd ops-task-cancel
global parameters {task-instance-id=ID | task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name]
|
|---|
Parameter | task-instance=
Required; An internal Universal Controller identifier.
task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance to run the command on.task-instance-name=
Required if task-instance-id= is not specified; Name of the task instance to run the command on. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instanceworkflow-instance-name=
For a task instance in a workflow, optional; Name of the workflow instance.
|
|---|
Example | |
|---|
Clear All Dependencies
Description | Clears all dependencies of a task instance. |
|---|
Syntax | uagcmd ops-task-clear-dependencies
global parameters {task-instance-id=ID | task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name]
|
|---|
Parameters | task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance to run the command on.task-instance-name=
Required if task-instance-id= is not specified; Name of the task instance to run the command on. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance.workflow-instance-name=
For a task instance in a workflow, optional; Name of the workflow instance.
|
|---|
Example |
uagcmd ops-task-clear-dependencies -c config.cfg task-instance-name=Task A
|
|---|
Clear Virtual Resource Dependencies
Description | Clears all virtual resource dependencies of a task instance. |
|---|
Syntax | uagcmd ops-task-clear-resources
global parameters {task-instance-id=ID | task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name] resource-name=name
|
|---|
Parameters | task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance to run the command on.task-instance-name=
Required if task-instance-id= is not specified; Name of the task instance to run the command on. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance.workflow-instance-name=
For a task instance in a workflow, optional; Name of the workflow instance.resource-name=
Required; One of the following:- Name of the virtual resource dependency to clear.
- An asterisk ( * ) to clear all virtual resource dependencies.
|
|---|
Example |
uagcmd ops-task-clear-resources -c config.cfg task-instance-name=Task A resource-name=Resource A
|
|---|
Clear Exclusive Dependencies
Description | Clears all exclusive dependencies of a task instance. |
|---|
Syntax | uagcmd ops-task-clear-exclusive
global parameters {task-instance-id=ID | task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name]
|
|---|
Parameters | task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance to run the command on.task-instance-name=
Required if task-instance-id= is not specified; Name of the task instance to run the command on. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance.workflow-instance-name=
For a task instance in a workflow, optional; Name of the workflow instance.
|
|---|
Example |
uagcmd ops-task-clear-exclusive -c config.cfg task-instance-name=Task A
|
|---|
Clear Time Dependency
Description | Clears the time dependency of a task instance. |
|---|
Syntax | uagcmd ops-task-clear-timewait
global parameters {task-instance-id=ID | task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name]
|
|---|
Parameters | task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance to run the command on.task-instance-name=
Required if task-instance-id= is not specified; Name of the task instance to run the command on. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance.workflow-instance-name=
For a task instance in a workflow, optional; Name of the workflow instance.
|
|---|
Example |
uagcmd ops-task-clear-timewait -c config.cfg task-instance-name=Task A
|
|---|
Display All Tasks
Description | Displays all specified tasks. |
|---|
Syntax | uagcmd ops-task-list
global parameters task-name=name [task-type=type]
|
|---|
Parameters | task-name=
Optional; Name or partial name of one or more tasks. Wildcards are supported.task-type=
Optional; One of the following (not case sensitive): application_control, email, email_monitor, agent_file_monitor, ftp, remote_file_monitor, indesca / universal_command / ucmd, manual, sap, peoplesoft, sql, stored_procedure, system_monitor, task_monitor, timer, unix, variable_monitor, web_service, windows, workflow, zos.
|
|---|
Example |
uagcmd ops-task-list -c config.cfg task-name=Task A task-type=timer
|
|---|
Display Task Instance Status
Description | Displays the status of all task instance(s) associated with the specified task. |
|---|
Syntax | uagcmd ops-task-status
global parameters task-instance-name=name [agent-name=name] [task-type=type] [task-status=status] [{workflow-instance-id=id] | [workflow-instance-name=name}] [workflow-instance-criteria=criteria] [options=v]
|
|---|
Parameters | task-name=
Required; Name or partial name of one or more tasks. Wildcards are supported.
task-instance-name=
Optional; Name of the task instance(s) to be listed. Wildcards are supported.agent-name=
Optional; Name of the agent the task instance(s) are running on.task-type=
Optional; One of the following (not case sensitive): application_control, email, email_monitor, agent file_monitor, ftp, remote_file_monitor, indesca / universal_command / ucmd, manual, sap, peoplesoft, sql, stored_procedure, system_monitor, task_monitor, timer, unix, variable_monitor, web_service, windows, workflow, zos.task-status=
Optional; List of comma-separated task status codes and/or names (not case sensitive): status code or name,status code or name,...,status code or name. An exclamation mark (!) preceding a task status code or name excludes task instances with that status.workflow-instance-id=
For a task instance in a workflow, optional if workflow-instance-name= is not specified; sys_id of the workflow instance.workflow-instance-name=
For a task instance in a workflow, optional if workflow-instance-id= is not specified; Name of the workflow instance. (If workflow-instance-criteria= is not specified, the oldest active Workflow instance with the matching name will apply.)workflow-instance-criteria=
Optional, if workflow-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance.options=
Optional; v (Return verbose results.)
|
|---|
Example |
uagcmd ops-task-status -c config.cfg task-instance-name=mantask agent-name=managent task-type=manual
|
|---|
Task Instance Status Types
The following table describes all possible task instance statuses for all task types.
Status Name | Status Code | Task Type | Description |
|---|
Action_Required | 60 | Manual | When a manual task launches, it goes into Action Required status, meaning a user must perform some manual activity. For details, see Manual task. |
Cancel_Pending | 99 | Agent-based | A process running on the Agent needs to be terminated. When the Cancel command is issued, the task instance will go into a Cancel Pending status until the Agent reports back that the process has been cancelled. At that point, the task instance will transition into the Cancelled status. |
Cancelled | 130 | All | The task was cancelled by a user. |
Confirmation_Required | 125 | z/OS | If you make JCL changes and restart a z/OS task, Universal Controller will put the task into Confirmation Required status and prompt you for a confirmation. For detailed processing steps, see Rerunning a z/OS Task. |
| 0 | All | The new task instance has been created (the task has been launched). |
Exclusive_Requested | 22 | All | All tasks with a mutually exclusive task defined go immediately to a status of Exclusive Requested. If the task is available to run exclusively, the task then moves to the next appropriate processing status. |
Exclusive_Wait | 23 | All | The task is mutually exclusive with one or more other tasks, and it is waiting for those tasks to finish before it will run. |
Execution_Wait | 33 | Agent-based | The task must wait to be completed; either the Agent/Agent Cluster running the task has reached its Task Execution Limit, or the ability of the Agent/Agent Cluster to run tasks has been suspended. |
Failed | 140 | All* | The task ran to a failure status. |
| 190 | All | The task was forced by the user to finish. The user may do this in cases where the task had a Cancelled or Failed status, and the user needed to release other task instances depending on the successful completion of this task instance in a workflow. For more information, see Force Finishing a Task Instance. |
| 20 | All | The task has been put on hold by a user. |
In_Doubt | 110 | Agent-based | The Agent is "in doubt" about the current status of the task instance. This may occur if an Agent or Agent connection goes down. In this case, the Agent restarts and reviews its data about tasks in progress. If the Agent finds a task still running, it resumes normal monitoring. If the Agent cannot find the task, this usually indicates that the task completed, but the Agent considers the task status to be "in doubt." |
| Instance_Wait | 17 | All | The task instance has been loaded by a workflow and is waiting on a previous instance(s) of the same task based on the Instance Wait Resolved specification. |
Queued | 40 | Agent-based | The task has been queued on a resource. |
Resource_Requested | 25 | All | All tasks with a virtual resource defined go immediately to a status of Resource Requested. If the resource is available, the task then moves to the next appropriate processing status. |
Resource_Wait | 30 | All | All tasks with a virtual resource defined go immediately to a status of Resource Requested. If the resource is not available, the task goes to a status of Resource Wait. When the resource becomes available, the task moves to the next appropriate processing status |
| 80 | All | The task is running. For Agent-based tasks, the Agent has started running the program. |
| 81 | Workflow | One or more tasks within the workflow has one of the following statuses: - Cancelled
- Confirmation Required
- Failure
- In Doubt
- Running/Problems (for sub-workflows)
- Start Failure
- Undeliverable
|
Skipped | 180 | All | The task was skipped by a user. |
| 120 | All | The task was unable to start. |
| 70 | Agent-based, Manual | The task has started. For Agent-based tasks, this means the Agent has received the task. |
Submitted | 43 | z/OS | The task has been submitted to the z/OS Job Entry subsystem and scheduled by the z/OS Job Scheduler. |
| 200 | All | The task has completed successfully. Workflows will transition to Success status when all of its tasks have transitioned to Success, Finished, or Skipped status. |
| 15 | All (except Timer) | The task is waiting to start based on a Wait To Start and/or Delay On Start specification. |
Undeliverable | 35 | Agent-based | The Agent is unavailable. |
Waiting | 10 | All | The task has been loaded by a workflow and is waiting on a predecessor. |
* Workflows cannot go to Failed status.
Force Finish a Task
Description | Force finishes the specified task instance.
See Force Finishing a Task Instance for a description of behavior and restrictions. |
|---|
Syntax | uagcmd ops-task-forcefinish
global parameters {task-instance-id=ID | task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name]
|
|---|
Parameter | task-instance=
Required; An internal Universal Controller Identifier
task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance to run the command on.task-instance-name=
Required if task-instance-id= is not specified; Name of the task instance to run the command on. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instanceworkflow-instance-name=
For a task instance in a workflow, optional; Name of the workflow instance.
|
|---|
Example |
uagcmd ops-task-forcefinish -c config.cfg task-instance-id=90079020d861e5e40128cbb3cdbe1cf3
|
|---|
Launch a Task
Description | Launches the specified task(s). |
|---|
Syntax | uagcmd ops-task-launch
global parameters [task-type=type] task-name=name {time-zone=Australia/Sydney] [hold=option] [task-variables=variables] [virtual-resource-priority=priority] [virtual-resources=resources]
|
|---|
Parameters | task-type=
Optional; One of the following (not case sensitive): timer, windows, unix, zos, agent_file_monitor, manual, email, email_monitor, ftp, sql, remote_file_monitor, task_monitor, stored_procedure, workflow, sap, peoplesoft, system_monitor, indesca / universal_command / ucmd, web_service, application_control.task-name=
Required; Valid task name. Wildcards are supported.time-zone=
Optional; Time zone in which the task is launched.hold=
Optional; Specification for whether to place the task in Held status when it is launched. Valid values are (not case sensitive): yes/y/true.task-variables=
Optional; Any variables specified in the task that need a value to run properly.virtual-resource-priority=
Optional; Virtual resource priority of the task instance. Valid values are any integer between 1 and 20. Defaults to the virtual resource priority defined in the task Details.virtual-resources=
Optional; Comma-separated list of <resource-name>:<amount> pairs. For example, VR1:10,VR2:20,...,VRN:N. An amount of 0 indicates the virtual resource should be dropped. Defaults to virtual resources defined in the task Details.
The virtual resource dependencies specified in virtual-resources= are merged with the default virtual resource dependencies.- If a default virtual resource dependency already exists for a specified virtual resource amount, the virtual resource dependency is updated.
- Any virtual resource specified with an amount of 0 is dropped from the default virtual resource dependencies; if the virtual resource did not exist as a default dependency, the command will fail.
- If a default virtual resource dependency does not already exist for a specified virtual resource amount, the virtual resource dependency is added.
|
|---|
Example | (All variable=value pairs must be specified within one set of braces.)
uagcmd ops-task-launch -c config.cfg task-name=Windows Task A task-variables={variable1=first value variable2=second value}
|
|---|
Put Task on Hold
Description | Puts the specified task instance on hold.
See Putting a Task Instance on Hold for a description of behavior and restrictions. |
|---|
Syntax | uagcmd ops-task-hold
global parameters {task-instance-id=ID | task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name]
|
|---|
Parameter | task-instance=
Required; An internal Universal Controller identifier
task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance to run the command on.task-instance-name=
Required if task-instance-id= is not specified; Name of the task instance to run the command on. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instanceworkflow-instance-name=
For a task instance in a workflow, optional; Name of the workflow instance.
|
|---|
Example |
uagcmd ops-task-hold -c config.cfg task-instance=90079020d861e5e40128cbb3cdbe1cf3
|
|---|
Release a Task from Hold
Description | Releases the specified task instance from hold.
See Releasing a Task Instance from Hold for a description of behavior and restrictions. |
|---|
Syntax | uagcmd ops-task-release
global parameters {task-instance-id=ID | task-instance-id=name} [instance-criteria=criteria] [workflow-instance-name] [recursive=option]
|
|---|
Parameter | task-instance=
Required; An internal Universal Controller identifier
task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance to run the command on.task-instance-name=
Required if task-instance-id= is not specified; Name of the task instance to run the command on. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instanceworkflow-instance-name=
For a task instance in a workflow, optional; Name of the workflow instance.recursive=
Optional; Specification (yes or no), if the task instance specified in task-instance-id= or task-instance-name= is a workflow, for whether or not to release the held workflow recursively. (Default is no.) If the task instance is not a workflow, recursive= is ignored.
|
|---|
Example |
uagcmd ops-task-release -c config.cfg task-instance-id=90079020d861e5e40128cbb3cdbe1cf3
|
|---|
Rerun a Task
Description | Reruns the specified Task instance.
See Re-running a Task Instance for a description of behavior and restrictions. |
|---|
Syntax | uagcmd ops-task-rerun
global parameters {task-instance-id=ID | task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name] {[task-status=status [recursive=option]]
}
|
|---|
Parameter | task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance to run the command on.task-instance-name=
Required if task-instance-id= is not specified; Name of the task instance to run the command on. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instanceworkflow-instance-name=
Optional; Name of the workflow instance.task-status=
Optional; list of comma-separated status codes or case-insensitive status names (see below). Format: <:status-code-or-name>,<status-code-or-name>,...,<status-code-or-name>. Applicable only if matched task instance is workflow type; command will fail otherwise.
All tasks within the matching workflow with a matching status will be queued for re-run. Sub-workflows do not support re-run directly; the recursive= parameter controls whether or not tasks within sub-workflows matching the status will be queued for re-run.- Start_Failure (120)
- Cancelled (130)
- Failed (140)
- Finished (190)
- Success (200)
recursive=
Optional if task-status= is specified; One of the following (not case-sensitive): Yes|Y|true or No|N|false (default). Indicates whether or not tasks within sub-workflows will qualify for re-run.
|
|---|
Example |
uagcmd ops-task-rerun -c config.cfg task-instance=8fda93dcd861e5e4005bf48e2cad6206 task-status=140
|
|---|
Set Manual Task to Started
Description | For a Manual task, changes its status from Action Required to Started. This allows you to acknowledge the Manual task and indicate that the manual procedures have been started. |
|---|
Syntax | uagcmd ops-manual-setstarted
global parameters {task-instance-id=ID | task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name]
|
|---|
Parameter | task-instance=
Required; An internal Universal Controller identifier
task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance to run the command on.task-instance-name=
Required if task-instance-id= is not specified; Name of the task instance to run the command on. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instanceworkflow-instance-name=
For a task instance in a workflow, optional; Name of the workflow instance.
|
|---|
Example |
uagcmd ops-manual-setstarted -c config.cfg task-instance=8fda93dcd861e5e4005bf48e2cad6206
|
|---|
Set Manual Task to Success
Description | For a Manual task, sets its status to Success. |
|---|
Syntax | uagcmd ops-manual-setcompleted
global parameters {task-instance-id=ID | task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name]
|
|---|
Parameter | task-instance=
Required; An internal Universal Controller identifier
task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance to run the command on.task-instance-name=
Required if task-instance-id= is not specified; Name of the task instance to run the command on. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instanceworkflow-instance-name=
For a task instance in a workflow, optional; Name of the workflow instance.
|
|---|
Example |
uagcmd ops-manual-setcompleted -c config.cfg task-instance=8fda93dcd861e5e4005bf48e2cad6206
|
|---|
Set or Modify Wait Time for a Task Instance
Description | Sets or modifies the Wait time for a task instance that specifies how long it will wait to run after it has become eligible to run. |
|---|
Syntax | uagcmd ops-task-set-timewait
global parameters {task-instance-id=ID | task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name=name] {wait-type=type [wait-day-constraint=constraint] {wait-time=wait time | wait-duration=duration | wait-seconds=duration in seconds} | delay-type=type {delay-duration=duration | delay-seconds=duration in seconds
}}
|
|---|
Parameters | task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance.task-instance-name=
Required if task-instance-id= is not specified; Name of the time task instance. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instance.workflow-instance-name=
For a task instance in a workflow, optional; Name of the workflow instance. (The most recently created workflow instance with the matching name will apply.)wait-type=
Required if delay-type= is not specified; one of the following (not case sensitive): none, time, relative_time, duration, seconds.wait-time=
Required if wait-type=time or relative_time; Wait time in format HH:MM. Variables are supported.wait-day-constraint=
Optional if wait-type=time or relative_time; One of the following (not case sensitive): none, same day/same_day, next day/next_day, next business day/next_business_day, sunday, monday, tuesday, wednesday, thursday, friday, saturday.wait-duration=
Required if wait-type=duration; Wait duration in format DD:HH:MM:SS.wait-seconds=
Required if wait-type=seconds; Wait duration in format SS. Variables are supported.delay-type=
Required if wait-type= is not specified; One of the following (not case sensitive): none, duration, seconds.delay-duration=
Required if delay_type=duration; Specific delay duration in format DD:HH:MM:SS.delay-seconds=
Required if delay_type=seconds; Specific delay duration in format SS. Variables are supported.
|
|---|
Example |
uagcmd ops-task-set-timewait -c config.cfg task-instance-name=Task 5A workflow-instance-name=Workflow A wait-type=time wait-time=18:00
|
|---|
Set Task Priority
Description | For Agent-based tasks (Linux/Unix, Universal, Windows, and z/OS), changes the priority on the specified task instance.
See Changing the Priority of a Task Instance for a description of behavior and restrictions. |
|---|
Syntax | uagcmd ops-task-setpriority
global parameters {task-instance-id=ID | task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name] priority=priority
|
|---|
Parameters | task-instance=
Required; An internal Universal Controller identifier
task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance to run the command on.task-instance-name=
Required if task-instance-id= is not specified; Name of the task instance to run the command on. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instanceworkflow-instance-name=
For a task instance in a workflow, optional; Name of the workflow instance.priority=
Required; One of the following (not case sensitive): high, medium, low.
|
|---|
Example |
uagcmd ops-task-setpriority -c config.cfg task-instance=90079026d861e5e400bba81913a4fdd0 priority=high
|
|---|
Skip a Task
Description | Skips the specified task instance.
See Skipping a Task Instance for a description of behavior and restrictions. |
|---|
Syntax | uagcmd ops-task-skip
global parameters {task-instance-id=ID | task-instance-name=name} [instance-criteria=criteria] [workflow-instance-name]
|
|---|
Parameter | task-instance=
Required; An internal Universal Controller identifier
task-instance-id=
Required if task-instance-name= is not specified; sys_id of the task instance to run the command on.task-instance-name=
Required if task-instance-id= is not specified; Name of the task instance to run the command on. (If instance-criteria= is not specified, the oldest active task instance with the matching name will apply.)instance-criteria=
Optional, if task-instance-name= is specified; One of the following (not case-sensitive): oldest_active_instance (default), oldest_instance, newest_active_instance, newest_instanceworkflow-instance-name=
For a task instance in a workflow, optional; Name of the workflow instance.
|
|---|
Example |
uagcmd ops-task-skip -c config.cfg task-instance=90079026d861e5e400bba81913a4fdd0
|
|---|