UNV3000-UNV3099
----
UNV3000E Job network creation failed: (msgNo) bapiStr
Description
An error occurred in the job network creation process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV3001E Job network start failed: (msgNo) bapiStr
Description
An error occurred trying to start a job network. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. <->
bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV3002E Mutually exclusive PURGE parameters specified.
Description
One or more conflicting parameters have been specified for the PURGE command. Each command group has a specific set of options that are available to it.
Severity
Error
System Action
The program terminates.
User Action
Determine which PURGE parameters do not belong. Remove the conflicting command options and reissue the command.
Component
Universal Connector
----
UNV3003I Job network (jobnetid) has been created.
Description
The Job network identified by jobnetid has been created.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV3004I Job network (jobnetid) - process(jobnetprcid) has been started.
Description
The Job network process, identified by jobnetid and jobnetprcid, has been started.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV3005I Job network (jobnetid) has been purged.
Description
The job network identified by jobnetid has been purged.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV3006W "Continuing without the use of BANK_MAP_PROCFL_GET_NET_STAT."
Description
Usap is unable to use BAPI function module BANK_MAP_PROCFL_GET_NET_STAT to retrieve the status of the FS job network. Processing will continue by relying on the technical return codes of the network processes.
Severity
Warning
System Action
Usap will use continue to process the job network.
User Action
Apply the necessary fix to the SAP R/3 system to support BAPI function module BANK_MAP_PROCFL_GET_NET_STAT.
Component
Universal Connector
----
UNV3007W "Usap is unable to purge the FS job network."
Description
BANK_MAP_PROCFL_DESTRUCTOR is not available on the SAP R/3 system. Usap is unable to purge the FS job network.
Severity
Warning
System Action
Usap will use continue to process the job network.
User Action
Apply the necessary fix to the SAP R/3 system to support BAPI function module BANK_MAP_PROCFL_DESTRUCTOR.
Component
Universal Connector
----
UNV3008I Job network (netid) - process (netprocid): technical status is now (jobStatus).
Description
Indicates that the jobnet process' technical status has changed to jobStatus.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV3009I Job network (netid) - process (netprocid): application status is now (jobStatus).
Description
Indicates that the jobnet process' application status has changed to jobStatus.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV3010I Job network (netid) - process (netprocid): application status is now (jobStatus).
Description
Indicates that the jobnet process' application status has changed to jobStatus.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV3011E A command ID must be specified when requesting a restart.
Description
When an attempt is made to restart a USAP started SAP R/3 job, a unique command ID must be supplied. This command ID is used by USAP to validate the restart request.
Severity
Error
System Action
The program terminates.
User Action
Add the -cmdid parameter to the USAP command line and specify the same command ID that was used for the initial run.
Component
Universal Connector
----
UNV3012E Unable to determine job name for restart option.
Description
A job name was not found on the command line or in a job definition file.
Severity
Error
System Action
The program terminates.
User Action
Make sure the job name is specified on the command line or, properly defined in a job definition file.
Component
Universal Connector
----
UNV3013E Job jobname/jobid already exists with Command ID (cmdId).
Description
A job with command ID cmdId already exists in the SAP R/3 system.
Severity
Error
System Action
The program terminates.
User Action
The pre-existing job with command ID cmdId must be removed from the R/3 system or, a unique jobname/command ID pair must be used.
Component
Universal Connector
----
UNV3014E Restart failed: Job (jobname) with command ID (cmdId) not found.
Description
Restart 'yes' was specified but, the restart job could not be found in the SAP R/3 system.
Severity
Error
System Action
The program terminates.
User Action
Make sure the job name and command ID are correct. If they are correct, the job must be defined to the R/3 system. This can be done automatically if the restart option is set to 'auto'.
Component
Universal Connector
----
UNV3015E Restart failed: multiple command ID jobs were found.
Description
Restart 'yes' was specified but, more than one job was found that matched the command ID job criteria.
Severity
Error
System Action
The program terminates.
User Action
Make sure the job name and command ID are correct. If they are correct, the duplicate command ID jobs must be purged from the R/3 system.
Component
Universal Connector
----
UNV3016I Starting search for command ID job: jobname/jobid/cmdid.
Description
Beginning a search for a command ID job.
Severity
Informational
System Action
The program continues.
User Action
Nothing.
Component
Universal Connector
----
UNV3017I Found command ID job: jobname/jobid/cmdid.
Description
A command ID job was found.
Severity
Informational
System Action
The program continues.
User Action
Nothing.
Component
Universal Connector
----
UNV3018I Ending search for command ID job: jobname/jobid/cmdid.
Description
The search for the command ID job has completed.
Severity
Informational
System Action
The program continues.
User Action
Nothing.
Component
Universal Connector
----
UNV3019E A command ID must be specified when requesting a restart.
Description
When an attempt is made to restart a Universal Connector command ID job, a unique command ID must be supplied. This command ID is used by the USAP to validate the restart request.
Severity
Error
System Action
The program terminates.
User Action
Add the -cmdid parameter to the Universal Connector command line and specify the same command ID that was used for the initial run.
Component
Universal Connector
----
UNV3020E Auto restart not allowed: auto_restart_ok option is set to NO.
Description
The AUTO option was specified for 'restart' parameter and the 'auto_restart_ok' parameter is set to NO.
Severity
Error
System Action
The program terminates.
User Action
Either set the auto_restart_ok parameter to YES or do not use the restart AUTO option.
Component
Universal Connector
----
UNV3021E 'Find Command ID Job' failed: (msgNo) bapiStr.
Description
An error occurred trying to find command ID jobs in the SAP R/3 system. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
This most likely does not indicate an error in processing. It usually indicates the absence of the job in the R/3 system.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV3022I Reconnecting to command ID job: jobname/jobid/cmdid.
Description
A command ID job matching the criteria specified on the command line was found. USAP will reconnect to the SAP R/3 job and complete the tasks specified on the command line.
Severity
Informational
System Action
The program continues.
User Action
Nothing.
Component
Universal Connector
----
UNV3023I Creating command ID job: jobname/jobid/cmdid.
Description
A command ID job will be created in the SAP R/3 system.
Severity
Informational
System Action
The program continues.
User Action
Nothing.
Component
Universal Connector
----
UNV3024E Variant creation failed: (msgNo) bapiStr
Description
An error occurred in the variant creation process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV3025E Obtaining variant contents failed: (msgNo) bapiStr
Description
An error occurred obtaining variant contents. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV3026E Invalid Generate command: disp.
Description
The command option, gen, entered for the GENERATE command is not valid.
Severity
Error
System Action
The program terminates.
User Action
Check the Universal Connector Reference Guide or command-line help for proper spelling and valid options.
Component
Universal Connector
----
UNV3027E Generating variant failed: (msgNo) bapiStr
Description
An error occurred trying to generate the variant. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV3028I Variant var was successfully created for report rpt.
Description
Indicates that the variant creation process was completed successfully for variant var of report rpt.
Severity
Informational
System Action
The program continues.
User Action
None.
Component