UAG1000-UAG1099
- Former user (Deleted)
- Stonebranch (Deactivated)
----
UAG1057S OpsWise taskid task exiting due to severity failure
Description
An error occurred that caused the indicated task to shut down.
Severity
Severe
System Action
The indicated task shuts down. UAG continues processing. Depending on the task, some functionality may be degraded.
User Action
Depending on the task, a restart of UAG may be required to restore full functionality.
Component
Universal Automation Center Agent
----
UAG1058A jobname,step,procstep,Code:cc Reply 1:CONT/SUCCESS, 2:CONT/FAIL, 3:HALT/FAIL
Description
The message is issued as a result of a job step matching a step condition check in the job's Opswise Controller task definition that requests for an operator reply on how job execution should proceed. The job (jobname), job step (step), and job procedure step (procstep) identifies the step that matched. The step condition code is cc.
Severity
Audit
System Action
The system action is dependent upon the operator reply.
User Action
Reply to the console message with one of the following values:
- 1 - to continue job execution and treat the step as successful.
- 2 - to continue job execution and treat the step as a failure.
- 3 - to stop job execution and treat the step as a failure.
Component
Universal Automation Center Agent
----
UAG1059A jobname,step,procstep,Code:cc Match stepdef,procstepdef,pgmdef,ccdef actiondef
Description
The message is issued as a result of a job step matching a step condition check in the job's Opswise Controller task definition. The job (jobname), job step (step), and job procedure step (procstep) identifies the step that matched. The step condition code is cc. The step condition check definition is identified by the step (stepdef), procedure step (procstepdef), program name (pgmdef), condition code (ccdef), and action (actiondef) values from the step condition definition that matched the step.
Severity
Audit
System Action
Processing continues.
User Action
No action required.
Component
Universal Automation Center Agent
----
UAG1060I exitname modname versionstring
Description
The UAG Server received a MODIFY STATUS console command to print the status of the UAG SMF exits. The message indicates the exit module is defined and provides information about the exit module. The exit name is exitname, the exit module is modname, and the exit module version string is versionstring.
Severity
Informational
System Action
Processing continues.
User Action
No action is required.
Component
Universal Automation Center Agent
----
UAG1061I exitname modname Status: Inactive
Description
The UAG Server received a MODIFY STATUS console command to print the status of the UAG SMF exits. The message indicates that a required UAG SMF exit module is not defined. SMF exit module modname is not defined to SMF exit exitname.
Severity
Informational
System Action
UAG continues process but will not be able to perform certain functions depending on the exit module that is not defined. For example, UAG may not be able to track z/OS batch jobs.
User Action
Define the UAG SMF exit module to the exit. Refer to the Installation Guide for details on SMF exit installation.
Component
Universal Automation Center Agent
----
UAG1062I jobname waiting for data set, RC=rc
Description
During job rerun initialization, UAG is required to delete a data set in order to rerun job jobname. UAG is unable to obtain the data set resource as it is being used by another address space. The data set is identified in message UAG1063I. The resource ENQ return code is rc.
Severity
Informational
System Action
UAG waits for the data set resource to become available at which time it will delete the data set. UAG issues message UAG1064A while waiting giving the operator the ability to cancel the job.
User Action
No action required.
Component
Universal Automation Center Agent
----
UAG1063I DSN=dsname
Description
Identfies the data set for which UAG is waiting so it can delete it. Refer to message UAG1062I for details.
Severity
Informational
System Action
Refer to UAG1062I.
User Action
Refer to UAG1062I.
Component
Universal Automation Center Agent
----
UAG1064A jobname waiting for data set. Reply CANCEL to cancel job.
Description
The message is issued as a result of a data set ENQ failure during <->
job rerun initialization. The data set is named in message UAG1063I. <->
Refer to message UAG1062I for a description of why UAG is waiting for the data set.
Severity
Audit
System Action
UAG suspends the job and waits for the data set to become available or for an operator reply of CANCEL. If a reply of CANCEL is received the job is terminated.
User Action
If no action is taken, UAG will keep the job suspended until the data set becomes available. Determine if the address space that is currently using the data set can be stopped. If it can, consider stopping the job so this job can continue. If the data set will not become available, reply CANCEL to cancel job and rerun the job at a later time when the data set is available..
Component
Universal Automation Center Agent
----
UAG1065E Error processing application type request: func, errno, reason
Description
An error occurred while processing an application monitor command. The type of application monitor command that failed was a type command. The function that failed is func. The error number is errno. The reason for the error is reason.
Severity
Error
System Action
Process of the application monitor command stops.
User Action
Determine the reason for the failure and take corrective action. Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1066E Error retrieving job sysout for exec ID execid: func, errno, reason
Description
An error occurred while retrieving a job sysout data set from the JES spool. The request was for a unit of work identified by abbreviated execution ID execid. The function, func, ended with an error code of errno. reason describes the error and provides diagnostic data.
Severity
Error
System Action
The request for job sysout ends with an error. UAG continues processing. Additional diagnostic messages UNV0152D are printed.
User Action
Determine the reason for the failure and take corrective action. Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1067E Error reading file name for exec ID execid: func, errno reason
Description
An error occurred trying to read the contents of file file into a memory buffer for processing. Function func encountered an error identified by the error number errno and error reason reason. The request was being performed on behalf of Opswise execution ID execid.
Severity
Error
System Action
The request for the file contents ends with an error. UAG continues processing.
User Action
Determine the reason for the failure and take corrective action. Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1068E Error processing spool data set for exec ID execid: ddn, func, errno, reason
Description
An error occurred processing a request for the spool data set for ddname ddn. The request was for a unit of work identified by abbreviated execution ID execid. The function, func, ended with an error code of errno. reason describes the error and provides diagnostic data.
Severity
Error
System Action
The request ends with an error. UAG continues processing. Additional diagnostic messages UNV0152D are printed.
User Action
Determine the reason for the failure and take corrective action. Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1069W Error requesting SYSOUT disposition processing for exec ID execid: func, errno, reason
Description
An error occurred requesting final disposition processing for the job SYSOUT data sets. The job task is identified by the abbreviated execution ID execid. The function, func, ended with an error number of errno. reason describes the error number.
Severity
Warning
System Action
Final disposition processing of the JES SYSOUT data sets is not performed. The SYSOUT data sets will remain in the JES queue.
User Action
Determine the reason for the failure and take corrective action. Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1070E Error processing SYSOUT disposition for exec ID execid, jobname, jobid: func, errno, reason
Description
An error occurred processing the final disposition for the SYSOUT data sets for job name jobname and job ID jobid. The job task is identified by the abbreviated execution ID execid. The function, func, ended with an error number of errno. reason describes the error number.
Severity
Error
System Action
Final disposition processing of the JES SYSOUT data sets is not performed. The SYSOUT data sets will remain in the JES queue.
User Action
Determine the reason for the failure and take corrective action. Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1071E Step End processing error for exec ID execid: func, errno, reason
Description
An error occurred processing a task STEP END message. The task is identified by the abbreviated execution ID execid. The function, func, ended with an error number of errno. reason describes the error number.
Severity
Error
System Action
Step end processing for the one task step fails. UAG continues processing task messages.
User Action
Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1072E Job End processing error for exec ID execid: func, errno, reason
Description
An error occurred processing a task JOB END message. The task is identified by the abbreviated execution ID execid. The function, func, ended with an error number of errno. reason describes the error number.
Severity
Error
System Action
Job end processing for the task fails. UAG continues processing task messages.
User Action
Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1073E JME scan processing error for exec ID execid: func, errno, reason
Description
An error occurred processing a JME SCAN message. The task is identified by the abbreviated execution ID execid. The function, func, ended with an error number of errno. reason describes the error number.
Severity
Error
System Action
JME scan processing for the task fails. UAG continues processing task messages.
User Action
Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1074E Message requeue error for exec ID execid: type, subtype, func, errno, reason
Description
An error occurred requeuing message. The task is identified by the abbreviated execution ID execid. The message type is type and subtype subtype. The function, func, ended with an error number of errno. reason describes the error number.
Severity
Error
System Action
UAG continues processing.
User Action
Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1075E Job output processing error for exec ID execid: func, errno, reason
Description
An error occurred processing a job output message. The task is identified by the abbreviated execution ID execid. The function, func, ended with an error number of errno. reason describes the error number.
Severity
Error
System Action
Job output processing for the task fails. UAG continues processing.
User Action
Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1076E JME subtype subtype processing error: func, errno, reason
Description
An error occurred processing a JME subtype subtype request. The function, func, ended with an error number of errno. reason describes the error number.
Severity
Error
System Action
The JME error will result in processing errors for the calling function. Refer to additional error messages to determine the impact of the error.
User Action
Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1077E POST from wxmemsmf, RC=rtncode
Description
An error occurred in an SMF exit trying to POST the UAGSRV communication ECB. The POST service return code is rtncode.
Severity
Error
System Action
The SMF record will not be immediately delivered to UAGSRV. The next time UAGSRV reads queued SMF records, the record will be processed.
User Action
Message UAG1078E identifies the job name and number for which the SMF exit was called. Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1078E JOB: jobname (jobid)
Description
Identifies the job name and number of the job that encountered the SMF
exit POST error identified by message UAG1077E.
Severity
Error
System Action
Refer to UAG1077E.
User Action
Refer to UAG1077E.
Component
Universal Automation Center Agent
----
UAG1079E OMS connection error (cnt): cid, rptfunc, errfunc errno, reason
Description
An error occurred on the OMS connection identified by cid. The error is reported by function rptfunc. The function encountering the error is errfunc. The error is identified by the error number errno and reason is an explanation of the error number. The value cnt indicates the number of time the error has occurred consecutively.
Severity
Error
System Action
If the error condition results in the OMS connection being disconnected from the OMS server, UAG attempts to re-establish the connection with the OMS server periodically.
User Action
If the error condition is network related, check the network between UAG and the OMS server. If the network error condition persists, contact your local network administrator for assistence clearing the condition.
Component
Universal Automation Center Agent
----
UAG1080E Error retrieving job sysout from cache for exec ID execid: func, errno, reason
Description
An error occurred while retrieving a job sysout data set from the cache. The request was for a unit of work identified by abbreviated <->
execution ID execid. The function, func, ended with an error code of errno. reason describes the error and provides diagnostic data.
Severity
Error
System Action
The request for job sysout ends with an error. UAG continues processing.
User Action
Determine the reason for the failure and take corrective action. Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1081E Error writing job sysout to the cache for exec ID execid: func, errno, reason
Description
An error occurred while writing a job sysout data set to the cache. <->
The request was for a unit of work identified by abbreviated <->
execution ID execid. The function, func, ended with an error code of errno. reason describes the error and provides diagnostic data.
Severity
Error
System Action
The request for job sysout ends with an error. UAG continues processing.
User Action
Determine the reason for the failure and take corrective action. Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1082I OMS connection ID cid established with OMS server at addr.
Description
UAG has opened a connection with the OMS server at address addr using OMS connection ID cid.
Severity
Informational
System Action
UAG continues processing.
User Action
No action required.
Component
Universal Automation Center Agent
----
UAG1083I OMS connection ID cid disconnected from OMS server at addr.
Description
UAG has closed the OMS connection ID cid> that was established with the OMS server at address addr.
Severity
Informational
System Action
If UAG is shutting down, the disconnect from the OMS server is normal part of operations. If UAG is not shutting down, the connection was disconnected due to an error condition. UAG will attempt to reestablish the OMS server connection.
User Action
If UAG was not shutting down, determine the cause for the connection problem and clear the condition. Refer to additional error messages logged by UAG. Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1084I UAG network provider has not been configured. Shutting down.
Description
The UAG server network provider (e.g. OMS) options are not configured. Consequentially, UAG performs a graceful shutdown. In order for UAG to be operational, its oms_servers option must be properly configured to communicate with the Universal Controller.
If more than one network provider is available for UAG, then the desired provider must be specified and its respective options set.
Severity
Informational
System Action
UAG gracefully shuts down.
User Action
If UAG is not required, no action is required. If UAG is required, the UAG options needed to establish communications with the Universal Controller must be specified.
Component
Universal Automation Center Agent
----
UAG1085E A CA certificate is required to authenticate the OMS server certificate.
Description
UAG has been configured to authenticate the OMS server certificate. Refer to configuration option SSL_SERVER_AUTH. In order to authenticate the OMS server certificate, a CA certificate list is required. UAG inherits the CA_CERTIFICATES option from the Universal Broker that starts it. Refer to the Universal Broker configuration documentation for more details on Universal Broker CA_CERTIFICATES configuration option.
Severity
Error
System Action
UAG shuts down.
User Action
Either turn off server authentication with the UAG SSL_SERVER_AUTH option, or configure the Universal Broker with a CA certificate list.
Component
Universal Automation Center Agent
----
UAG1086E Error establishing network message queue.
Description
An error occurred establishing the network message queue. The reason for the error is provided in diagnostic messages UNV0152D that follow this message.
Severity
Error
System Action
UAG shuts down.
User Action
Determine the cause of the error based on the information provided in messages UNV0152D. Take corrective action and restart UAG.
Component
Universal Automation Center Agent
----
UAG1087E Error processing DELOVRFILE message for exec ID execid: func, errno, reason
Description
An error occurred processing the DELOVRFILE message. The task is identified by the abbreviated execution ID execid. The function, func, ended with an error number of errno. reason describes the error number.
Severity
Error
System Action
UAG continues processing.
User Action
Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1088A Deleted override JCL file file.
Description
The override JCL file file was successfully deleted at the request of the Opswise Controller.
Severity
Audit
System Action
UAG continues processing.
User Action
No action required.
Component
Universal Automation Center Agent
----
UAG1089E Error deleting job file file: func, errno, reason
Description
An error occurred deleting job file file. The function, func, ended with an error number of errno. reason describes the error number.
Severity
Error
System Action
UAG continues processing.
User Action
Contact Stonebranch Customer Support if assistance is required.
Component
Universal Automation Center Agent
----
UAG1090I text
Description
The UAG Server received a MODIFY STATUS console command to print the status of a service or function. The message indicates the current status of the service or function.
Severity
Informational
System Action
UAG continues processing.
User Action
No action required.
Component
Universal Automation Center Agent
----
UAG1091I Agent name has connected from system sysname
Description
A notification was received by the issuing agent that an agent has connected to the Sysplex from system sysname.
Severity
Informational
System Action
UAG continues processing.
User Action
No action required.
Component
Universal Automation Center Agent
----
UAG1092I primary/secondary agent name on system sysname has disconnected
Description
A notification was received by the issuing agent that an agent has disconnected from the Sysplex on system sysname.
Severity
Informational
System Action
UAG continues processing.
User Action
No action required.
Component
Universal Automation Center Agent
----
UAG1093I primary/secondary agent name on system sysname has lost connection
Description
A notification was received by the issuing agent that an agent has lost connection to the Sysplex on system sysname.
Severity
Informational
System Action
UAG continues processing.
User Action
No action required.
Component
Universal Automation Center Agent
----
UAG1094I Job In Doubt. UAGRERUN stepcode=stepcode/pm>. jobname=\[jobname\], jesid=jesid, execid=jesid
Description
A notification was received by the issuing agent that step UAGRERUN in job jobname ended with a non-zero condition code. The remainder of the job may, or may not, have run successfully.
Severity
Informational
System Action
UAG continues processing.
User Action
Manually check the status of the job and update the status as appropriate.
Component
Universal Automation Center Agent
----
UAG1095I Existing agent name identified on system sysname
Description
A notification was received by the issuing agent that an agent is already connected to the Sysplex from system sysname.
Severity
Informational
System Action
UAG continues processing.
User Action
No action required.
Component
Universal Automation Center Agent
----
UAG1096I An error occurred processing an intercepted WTO message: msg, func, errno, reason
Description
An error occurred while processing an intercepted WTO message. The function, func, ended with an error number of errno. reason describes the error number. The message text was msg
Severity
Informational
System Action
UAG continues processing.
User Action
Manually check the status of the job and update the status as appropriate.
Component
Universal Automation Center Agent
----
UAG1097I csect: msg
Description
A message msg, was issued by a UAG exit from location csect. The content of the message is dependent on the situation encountered by the exit and the severity of the message.
Severity
Informational
System Action
None.
User Action
None.
Component
Universal Automation Center Agent
----
UAG1098E An invalid Universal Broker override specified for the UAG Server configuration option cfgopt was detected in func.
Description
An attempt to override the UAG Server configuration option, cfgopt, via the Universal Broker’s command line or environment failed due to an an invalid value. func is the name of the function in which the invalid value was detected.
Severity
Error
System Action
UAG Server terminates.
User Action
Refer to the Universal Agent Reference Guide to see which UAG Server options may be overridden from the Universal Broker command line or environment, and change the option’s value to match a supported value.
Component
Universal Automation Center Agent
----
UAG1099E service failed for module module, rc=rc.
Description
The indicated system serice (for instance BLDL, LOAD) failed for the indicated module and returned the return code in the message.
Severity
Error
System Action
UAG Server terminates.
User Action
Refer to the return code documentation for the indicate system service.
Component
Universal Automation Center Agent