UNV6100-UNV6199
----
UNV6100E func failed: (errno) reason
Description
A call to a system function, identified by func, was not successful. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support if unable to identify and resolve the problem.
Component
Opswise Message Service Administration Utility
----
UNV6101E Cannot access nls directory 'dir': reason
Description
The nls directory, used to store message catalogs and text translation tables, could not be accessed. dir is the complete path name of the nls directory. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the directory exists and the user account running the Opswise Message Service program has access to this directory.
Component
Opswise Message Service Administration Utility
----
UNV6102E Error listing message data file fname: func, errno, reason.
Description
An error occurred listing the message data file fname. Function func returned error code errno, which is described by reason.
Severity
Error
System Action
The program terminates.
User Action
Determine the cause of the error and take corrective action. Rerun the command when the condition is corrected.
Component
Opswise Message Service Administration Utility
----
UNV6103W Message data file contains cnt bad segments.
Description
The message data file being listed contains cnt bad segments. The bad segments are prefixed with a greater than sign in column one of the listing.
Severity
Warning
System Action
This message is printed after the listing is completed and the program is exiting.
User Action
The data file is either corrupted or the offset specified to OMSADM was
Component
Opswise Message Service Administration Utility
----
UNV6104W Message data file offset offs is not a multiple of the segment size 512.
Description
The specified offset value offs is not a multiple of the message data file segment size 512. As a result, it is very likely a large number of segments will be considered bad.
Severity
Warning
System Action
Processing continues.
User Action
No action required. There is a high potential for a large number of segments to be flagged as bad due to an incorrect offset.
Component
Opswise Message Service Administration Utility
----
UNV6105I I/O write test: count=cnt, flush interval=flush, rate=rate blocks/sec.
Description
The I/O test wrote cnt 512-byte blocks to the I/O test file. The blocks were flushed to disk at an interval of every flush block(s) written. The average rate at which the total blocks were written was rate blocks per second.
Severity
Informational
System Action
Processing continues.
User Action
No action required.
Component
Opswise Message Service Administration Utility
----
UNV6106E Error performing I/O test to file fname: func, errno, reason.
Description
An error occurred performing the I/O test to file fname. Function func returned error code errno, which is described by reason.
Severity
Error
System Action
The program terminates.
User Action
Determine the cause of the error and take corrective action. Rerun the command when the condition is corrected.
Component
Opswise Message Service Administration Utility
----
UNV6107E The IOFILE option is required for the TEST IO command.
Description
The I/O test requires the I/O file name to be specified. The I/O test writes the specified number of blocks to the I/O file.
Severity
Error
System Action
The program terminates.
User Action
Specify the I/O file name with the IOFILE option.
Component
Opswise Message Service Administration Utility
----
UNV6108E The IOCOUNT option is required for the TEST IO command.
Description
The I/O test requires the number of blocks to write for the test. The I/O test writes the specified number of blocks to the I/O file.
Severity
Error
System Action
The program terminates.
User Action
Specify the I/O blocks count with the IOCOUNT option.
Component
Opswise Message Service Administration Utility
----
UNV6109E Cannot access code page file 'file': reason
Description
The text translation file specified by file cannot be read. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Take corrective action based on the reason for the error. Contact Stonebranch Customer Support if assistance is required.
Component
Opswise Message Service Administration Utility
----
UNV6135A Configuration information:
Description
A header that precedes the display of configuration options in effect for the OMSADM program.
Severity
Audit
System Action
None.
User Action
None required.
Component
Opswise Message Service Administration Utility
----
UNV6136A option: value
Description
The message displays the configuration options and their values. The option name is option, and its value is value.
Severity
Audit
System Action
None.
User Action
None required.
Component
Opswise Message Service Administration Utility
----
UNV6137E Unable to connect to OMS Server at ipaddr, port: reason
Description
Unable to establish a TCP/IP connection to the OMS Server. ipaddr and port is the IP address of the host and TCP port number that OMSADM is attempting to establish a TCP/IP connection. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the IP address is the host on which OMS Server is running and that port is the TCP port number on which OMS Server is listening. If IP address and port are correct, insure OMS Server is running.
Component
Opswise Message Service Administration Utility
----
UNV6138E Error establishing communication session with OMS Server: func, errno, reason.
Description
An error occurred establishing a communication session with the OMS Server. func is the function that encountered the error. errno is the error number, and reason is an explanation of error number.
Severity
Error
System Action
The program terminates.
User Action
If the error is a communication error, retry the operation. Contact Stonebranch Customer support if assistance is required.
Component
Opswise Message Service Administration Utility
----
UNV6140I The 'cmd' command has completed successfully.
Description
The requested command cmd complete successfully.
Severity
Informational
System Action
The program continues processing.
User Action
No action required.
Component
Opswise Message Service Administration Utility
----
UNV6141E OMS Administration ending unsuccessfully with exit code exitcode.
Description
Opswise Message Service Administration utility encountered an error causing it to end with exit code exitcode.
Severity
Error
System Action
The program terminates.
User Action
Review previous error messages and take the User Action specified.
Component
Opswise Message Service Administration Utility
----
UNV6142E Error requesting list of connections: func, errno, reason.
Description
An error occurred requesting a list of OMS connections from the OMS Server. func is the function that encountered the error. errno is the error number, and reason is a description of the error number.
Severity
Error
System Action
The program terminates.
User Action
If the error is a communication related error, retry the operation. Contact Stonebranch Customer Support for assistance if required.
Component
Opswise Message Service Administration Utility
----
UNV6143E Error printing list of connections: func, errno, reason.
Description
An error occurred printing a list of OMS connections from the OMS Server. func is the function that encountered the error. errno is the error number, and reason is a description of the error number.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch Customer Support for assistance.
Component
Opswise Message Service Administration Utility
----
UNV6144I OMS Administration version started.
Description
Opswise Message Service Administration utility has started. The program version is version.
Severity
Informational
System Action
The program continues.
User Action
No action required.
Component
Opswise Message Service Administration Utility
----
UNV6147E OMS Administration ending successfully with exit code exitcode.
Description
Opswise Message Service Administration utility ended successfully with exit code exitcode.
Severity
Error
System Action
None
User Action
No action required.
Component
Opswise Message Service Administration Utility
----
UNV6153I The 'cmd' command has started.
Description
The requested command cmd has started processing.
Severity
Informational
System Action
None.
User Action
No action required.
Component
Opswise Message Service Administration Utility
----
UNV6159E Error requesting list of queues: func, errno, reason.
Description
An error occurred requesting a list of OMS queues from the OMS Server. func is the function that encountered the error. errno is the error number, and reason is a description of the error number.
Severity
Error
System Action
The program terminates.
User Action
If the error is a communication related error, retry the operation. Contact Stonebranch Customer Support for assistance if required.
Component
Opswise Message Service Administration Utility
----
UNV6160E Error printing list of queues: func, errno, reason.
Description
An error occurred printing a list of OMS queues from the OMS Server. func is the function that encountered the error. errno is the error number, and reason is a description of the error number.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch Customer Support for assistance.
Component
Opswise Message Service Administration Utility
----
UNV6169E Error requesting deletion of queues: func, errno, reason.
Description
An error occurred requesting a deletion of OMS queues from the OMS Server. func is the function that encountered the error. errno is the error number, and reason is a description of the error number.
Severity
Error
System Action
The program terminates.
User Action
If the error is a communication related error, retry the operation. Contact Stonebranch Customer Support for assistance if required.
Component
Opswise Message Service Administration Utility
----
UNV6170E No queue names matching 'qname' were found.
Description
No queue names matching qname were found on the OMS Server.
Severity
Error
System Action
The program ends with an error.
User Action
Check that the queue name is specified correct. Contact Stonebranch Customer Support for assistance if required.
Component
Opswise Message Service Administration Utility
----
UNV6171E The QUEUENAME option is required for the DELETE queues command.
Description
The DELETE queues command requires the QUEUENAME option value to select the queues to be deleted.
Severity
Error
System Action
The program ends with an error.
User Action
Use the QUEUENAME option to select the queues to be deleted.
Component
Opswise Message Service Administration Utility
----
UNV6172E The DATAFILE option is required for the LIST data command.
Description
The LIST data command requires the DATAFILE option value to specify the message data file to list.
Severity
Error
System Action
The program ends with an error.
User Action
Use the DATAFILE option to select the message data file to be listed.
Component
Opswise Message Service Administration Utility
----
UNV6173E Error requesting message trace: func, errno, reason.
Description
An error occurred in the OMS Server requesting a message trace. func is the function that encountered the error. errno is the error number, and reason is a description of the error number.
Severity
Error
System Action
The program terminates.
User Action
If the error is a communication related error, retry the operation. Contact Stonebranch Customer Support for assistance if required.
Component
Opswise Message Service Administration Utility
----
UNV6174E Message trace is not active.
Description
The message trace failed due to no active message trace was found.
Severity
Error
System Action
The program terminates.
User Action
No action required if attempting to deactivate a message trace. If another action was being attempted, review and correct the command options.
Component
Opswise Message Service Administration Utility
----
UNV6175E Unable to connect to Universal Broker to retrieve encryption key stored at path: reason
Description
A command file that was encrypted using an encryption key stored in a Universal Broker-managed keystore was specified as part of the OMS Administration utility command options. The OMS Admin utility failed to retrieve that key from the Broker whose service interface was specified as path. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
The specified path should be in the format \[port@\]ipaddr, where 'port' defaults to 7887. Make sure Universal Broker is running on the specified system and is accepting connections over the specified port. If the problem persists, contact Stonebranch customer support.
Component
Opswise Message Service Administration Utility