UNV0100-UNV0199
- Former user (Deleted)
- Stonebranch (Deactivated)
----
UNV0100E Invalid command line argument syntax.
Description
One of the following occurred:
- The parameter name was not preceded by a command line option prefix character ('-' or '/').
- A command line option prefix was specified, but the parameter name was either missing or separated from the prefix character by one or more spaces.
- The parameter name exceeded 61 characters.
- The parameter value exceeded 2000 characters.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide for correct command line syntax.
Component
Cross-Platform Messages
----
UNV0101E Unknown command line option: 'opt'
Description
The program does not recognize the command line option. opt is the option specified.
Severity
Error
System Action
The program terminates.
User Action
Run the program using the -help option to display a list of available options. See the User's Guide if more information is needed.
Component
Cross-Platform Messages
----
UNV0102E Error in command line option '-opt': reason
Description
For the specified option, either the syntax was incorrect or an invalid value was used. opt is the name of the option. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide for the correct usage of the specified option.
Component
Cross-Platform Messages
----
UNV0103E Error in environment variable 'var': reason.
Description
For the specified environment variable, either the syntax was incorrect or the value assigned to it was invalid. var is the name of the environment variable. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide for the correct usage of the specified environment variable.
Component
Cross-Platform Messages
----
UNV0104E I/O error on configuration file filename: func errno reason
Description
An attempt to read the specified configuration file failed. filename is the name of the configuration file. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0105E cfgfile (lineno): Invalid keyword 'keyword'
Description
A keyword in the specified configuration file was not valid, due to one of the following:
- The length of the keyword exceeded 61 characters.
- The program did not recognize the keyword.
cfgfile is the name of the configuration file that contains the invalid keyword. lineno is the line number of the configuration file where the invalid keyword is located. keyword is the invalid keyword.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide for the correct names of available configuration options. If the configuration option is not supported by the version of the software currently installed, either upgrade the software or comment out the entry in the configuration file.
Component
Cross-Platform Messages
----
UNV0106E cfgfile (lineno): Invalid value for keyword 'keyword' reason
Description
The value given for the specified keyword is not valid. cfgfile is the name of the configuration file that contains the invalid value. lineno is the line number of the configuration file where the invalid value is specified. keyword is the name of the keyword whose value is invalid. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide for an explanation of the configuration options, and for examples of valid option values. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0107E Error processing command line option 'opt': func, errno, reason.
Description
An attempt to obtain or verify the value of a configuration option specified on the command line failed. opt is the name of the command line option. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide or command line help to verify that all command line options were specified correctly. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0108E Error processing environment variable 'var': func, errno, reason.
Description
An attempt to obtain or verify the value of a configuration option specified as an environment variable failed. var is the name of the environment variable. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide or command line help to verify that any environment variables are correctly defined. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0109E cfgfile (lineno): Error processing keyword 'keyword': func, errno, reason.
Description
An attempt to obtain or verify the value of a configuration option specified in a configuration file failed. cfgfile is the name of the configuration file. lineno is the line number of the configuration file on which the error occurred. keyword is the name of the keyword. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide or command line help to verify that the configuration option is correctly defined. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0110E Error merging configuration parameter idx, rc = errno
Description
An attempt to resolve a configuration option into a single value from values specified from the command line, a configuration file, and/or environment variables failed. idx is an index into an internal parameter table. errno is the error number.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0111I Use -help option for command line help.
Description
This message is an instructional message displayed when the program is unable to obtain configuration options from the command line.
Severity
Informational
System Action
None
User Action
If desired, run the program again using only the -help command line option. This will display configuration options that can be specified from the command line, along with a short description of each.
Component
Cross-Platform Messages
----
UNV0112E Open failed for configuration file 'cfgfile': errno, reason
Description
The specified configuration file could not be opened. cfgfile is the name of the configuration file. errno is the error number and reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the user account running the program has read access to the directory where the configuration file resides. If the file does not exist, re-install the program. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0113E Open failed for registry key key: func, errno, reason
Description
An attempt to open the specified registry key in order to obtain program configuration options failed. key is the name of the registry key that could not be opened. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Use the registry editor (regedit.exe) to make sure the specified registry key exists. If it does not exist, repair the installation from the Control Panel via the Add/Remove Programs applet. Select the program from the list of installed software. When the installation starts, select the "Repair" option. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0114E Error in registry keyword 'keyword': reason
Description
The value for a configuration option could not be obtained from the specified registry key. This is due to one of the following:
- The value is not stored as a string the registry.
- A bad value was specified for the configuration option.
- Incorrect syntax was used for the configuration value.
keyword is the name of the registry entry. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Use the Universal Configuration Manager (accessible via the Control Panel) to update configuration options stored in the registry. Universal Configuration Manager should report any invalid values before updating the registry. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0115E Error processing registry keyword 'keyword': func, errno, reason.
Description
An attempt to obtain or verify the value of a configuration option specified in the registry failed. keyword is the name of the registry entry. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Try to repair the installation from the Control Panel using the Add/Remove Programs applet. Select the program from the list of installed software. When the installation program starts, select the "Repair" option. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0116E Error reading keyword keyword: func, errno, reason
Description
An attempt to obtain the value for a configuration option specified in the registry failed. keyword is the name of the registry entry that could not be read. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0117E cmdfile (lineno): Invalid option 'opt'
Description
A configuration option contained in the specified command file is not valid, due to one of the following reasons:
- The length of the option name exceeded 61 characters.
- The program did not recognize the configuration option.
cmdfile is the name of the command file that contains the invalid option. lineno is the line number of the command file where the invalid option is located. opt is the name of the invalid option.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide for the correct names of available configuration options. If the configuration option is not supported by the version of the software currently installed, either upgrade the software or comment out the entry in the configuration file.
Component
Cross-Platform Messages
----
UNV0118E cmdfile (lineno): Invalid value for option 'opt': reason.
Description
The value of a configuration option contained in the specified command file is not valid. cmdfile is the name of the command file. lineno is the line number of the command file where the option with the invalid value is located. opt is the name of the option with the invalid value. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide for an explanation of the configuration options, and for examples of valid option values. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0119E cfgfile (lineno): Value of keyword 'keyword' exceeded max length.
Description
The value of a configuration option exceeded the maximum length of 2000 characters. cfgfile is the name of the configuration file with the invalid value. lineno is the line number of the configuration file where the invalid value is located. keyword is the name of the configuration option with the invalid value.
Severity
Error
System Action
The program terminates.
User Action
Correct the value and restart the program.
Component
Cross-Platform Messages
----
UNV0120E cmdfile (lineno): Value of option 'opt' exceeded max length.
Description
The value of a configuration option exceeded the maximum length of 2000 characters. cmdfile is the name of the command file with the invalid value. lineno is the line number of the command file where the invalid value is located. opt is the name of the configuration option with the invalid value.
Severity
Error
System Action
The program terminates.
User Action
Correct the value and restart the program.
Component
Cross-Platform Messages
----
UNV0121E cmdfile (lineno): Error processing option 'opt': func, errno, reason.
Description
An attempt to obtain or verify the value of a configuration option specified in a command file failed. cmdfile is the name of the command file. lineno is the line number of the command file on which the error occurred. opt is the name of the configuration option. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide or command line help to verify that the configuration option is correctly defined. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0122E I/O error on command file cmdfile: func errno reason
Description
An attempt to read from the specified command file failed. cmdfile is the name of the command file. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the file still exists and the user account running the program has read access to the directory where the file is located. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0123E cmdfile (lineno): Missing command option prefix character.
Description
The program expected to find the start of a configuration option name, but the prefix character ('-' or '/') was missing. cmdfile is the name of the command file that contains the error. lineno is the line number of the command file where the error was detected.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide for the correct syntax of configuration options that are specified in a command file.
Component
Cross-Platform Messages
----
UNV0124E I/O error on command file cmdfile: func errno reason
Description
An attempt to read from the specified command file failed. cmdfile is the name of the command file. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the file still exists and the user account running the program has read access to the directory where the file is located. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0125E Open failed for command file cmdfile: reason
Description
An attempt to open the specified command file in order to obtain configuration options failed. cmdfile is the name of the command file. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the file still exists and the user account running the program has read access to the directory where the file is located. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0126E License parameters do no match license key.
Description
To validate a license key, the program takes the license information contained in a configuration file (or the Windows registry) and generates a license key. This message is displayed if the generated key does not match the license key saved in the configuration file.
Severity
Error
System Action
The program terminates.
User Action
Check all license information saved in the program's configuration file and compare it to the license information you received with your initial software package. Make sure everything matches. Refer to the User's Guide for information on entering license information in the configuration file.
Component
Cross-Platform Messages
----
UNV0127E License is for product licprod, not prod.
Description
The license information saved in the program's configuration file does result in a valid license key; however, the key is for the wrong product. licprod is the name of the product specified in the license information. prod is the name of the product whose license information the program requires.
Severity
Error
System Action
The program terminates.
User Action
Update the license information in the program's configuration file to match the license information you received with the initial software package.
Component
Cross-Platform Messages
----
UNV0128E License is for operating system type licos, not os.
Description
The license information saved in the program's configuration file does result in a valid license key; however, the key is for the wrong operating system. licos is the name of the operating system specified in the license information. os is the name of the operating system on which the program is currently installed.
Severity
Error
System Action
The program terminates.
User Action
Update the license information in the program's configuration file to match the license information you received with the initial software package.
Component
Cross-Platform Messages
----
UNV0129E License is expired. Contact Stonebranch, Inc. for license renewal.
Description
The expiration date for the product license has passed.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch sales support for a new product license.
Component
Cross-Platform Messages
----
UNV0130E Product license expires in num day(s). Contact Stonebranch, Inc. for license renewal.
Description
The current product license will expire soon. num is the number of days left before the license expires.
Severity
Error
System Action
The program continues.
User Action
The software can be used up to the day the license expires. However, to make sure there is no interruption in software usage, please contact Stonebranch sales support as soon as possible for an updated license.
Component
Cross-Platform Messages
----
UNV0131E Error validating license: func, errno, reason
Description
An attempt to validate the software's license key failed. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0132E Product demonstration license expires in num day(s).
Description
The current software, which was licensed for a trial period only, will expire in the number of days specified by num.
Severity
Error
System Action
The program continues.
User Action
The software can be used up to the day the license expires. To continue using the software after the trial period, a license must be purchased. Contact Stonebranch sales support for more information.
Component
Cross-Platform Messages
----
UNV0133E License key is missing.
Description
The program could not find a value for the license key in the configuration file.
Severity
Error
System Action
The program terminates.
User Action
Set the value for the license_key entry in the program's configuration file to the one specified in the license information included with the initial software package.
Windows NT/2000 users: Enter the license key using the Universal Configuration Manager applet, accessible via the Control Panel.
Component
Cross-Platform Messages
----
UNV0134E Encrypted command file error: record exceeds maximum length of maxlen.
Description
The current command file record is too large to be read into the allocated buffer. maxlen is the size of the buffer used to store records.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0135E Encrypted command file error: error reading file fname: errno, reason
Description
An attempt to read a record from the encrypted command file failed. fname is the name of the encrypted command file. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the file still exists and the user account running the program has read access to the file. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0136E Encrypted command file error: record is improperly formatted.
Description
The program could not find the information in the encrypted command file it requires to decrypt the file.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0137E Encrypted command file error: checksum mismatch.
Description
The encrypted data has been modified since it was originally encrypted.
Severity
Error
System Action
The program terminates.
User Action
Recreate the encrypted command file.
Component
Cross-Platform Messages
----
UNV0138E Encrypted command file error: func, errno, reason
Description
An attempt to read or process data contained in the encrypted command file failed. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0139W Error obtaining version information in func (errno): reason
Description
An attempt to obtain the program's version information failed. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Warning
System Action
The program will be unable to return version information when it is requested from the command line. In all other aspects, the program should function as usual.
User Action
Contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0140E Error processing meta-data statement in command file cmdfile: func, errno, reason
Description
An error processing a meta-data statement in a command file occurred. A meta-data statement specifies how the data within the file is interpreted. An example of a meta-data statement is the logical end-of-file statement, <eof>.
cmdfile is the name of the command file. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Review the command file for the invalid meta-data statement. Restart the command after the statement is corrected.
Component
Cross-Platform Messages
----
UNV0141E Unexpected meta-data statement found in command file cmdfile, datatype.
Description
An unexpected meta-data statement was found in a command file. A meta-data statement specifies how the data within the file is interpreted. An example of a meta-data statement is the logical end-of-file statement, <eof>.
cmdfile is the name of the command file. datatype is the internal numeric value of the meta-data statement found.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0142E Command file decryption failed due to key mismatch.
Description
The command file could not be properly decrypted because the key used to encrypt the file is not the same that was used to decrypt the file.
Severity
Error
System Action
The program terminates.
User Action
Decrypt the command file with the correct key.
Component
Cross-Platform Messages
----
UNV0143E Error in event management system: func, subfunc, errno, reason.
Description
An error occurred in the event management system. The function encountering the error was func. The sub-function in which the error occurred is subfunc The error number is errno and the error description is reason.
Severity
Error
System Action
Program action depends on the context in which the error occurred. Refer to additional messages for the system action taken.
User Action
User action depends on the context in which the error occurred. Refer to additional messages for the recommended user action taken.
Component
Cross-Platform Messages
----
UNV0144E Error posting termination event: func, errno reason.
Description
An error occurred posting the process termination event. The function encountering the error was func. The error number is errno and the error description is reason.
Severity
Error
System Action
The event management system will terminate since it cannot post the application termination event. Once the event management system terminates, the application most likely will terminate without properly shutting down.
User Action
Contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0145E SSL handshake error: rc=returnCode, locus=locus, type=errorType, ec=errorCode, msg='errorMsg'
Description
An error occurred performing a SSL handshake. The error could be caused by a number reasons. This message provides available information to help diagnose the error. The information provided consists of the return code, returnCode, the attribute locus, locus, the error type, errorType, the error code, errorCode, and the error message, errorMsg.
Severity
Error
System Action
Refer to the system action of the messages issued after this message.
User Action
Refer to the user action of the messages issued after this message.
Component
Cross-Platform Messages
----
UNV0150E Event Id: id not found.
Description
An event object with the specified identifier id could not be found in the event object list.
Severity
Error
System Action
The program's behavior may become unpredictable.
User Action
Contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0151D stackid-stackentry : error
Description
Prints OpenSSL diagnostic information for problem resolution. This message may be issued one or more times printing the OpenSSL internal error stack. The stack messages are identified by stackid. The error, error, may contain many different things and is used by Stonebranch Technical Support for problem diagnoses.
Severity
Diagnostic
System Action
Determined by other error messages.
User Action
Save the messages for Stonebranch Customer Support.
Component
Cross-Platform Messages
----
UNV0152D stackid-stackentry time, srcfile, srcline, func, errno, 'reason', 'auxdata'
Description
Stonebranch diagnostic information for problem resolution. This message may be issued one or more times printing the internal error stack. The stack messages are identified by stackid. The definition of the error fields are as follows: time is the time the error was recorded, srcfile is the source file that reported the error, srcline is the line number within the source file, func is the name of the function encountering the error, errno is the error number, reason is the description of the errno, and auxdata is any auxiliary data recorded with the error.
Severity
Diagnostic
System Action
Determined by other error messages.
User Action
Save the messages for Stonebranch Customer Support.
Component
Cross-Platform Messages
----
UNV0153E Certificate verification failed: depth=depth, code=code, error='reason'.
Description
Certificate verification is performed on a chain of certificates. The verification process failed. The chain of certificates is numbered from the peer certificate at depth 0 to the root CA certificate at the highest depth. The depth of the certificate that failed is depth. The reason it failed is described in field reason. The diagnostic code is specified in the code field. Additional certificate information follows in messages UNV0154E, UNV0155E and UNV0178E.
Severity
Error
System Action
The SSL connection will be terminated.
User Action
This could indicate unauthorized access to the system or an incorrectly setup certificate chain.
Component
Cross-Platform Messages
----
UNV0154E Certificate issuer name: 'issuerName'
Description
Certificate verification failed as described in the previously issued message UNV0153. The issuerName field of the certificate is specified in issuerName.
Severity
Error
System Action
Refer to message UNV0153.
User Action
Refer to message UNV0153.
Component
Cross-Platform Messages
----
UNV0155E Certificate subject name: 'subjectName'
Description
Certificate verification failed as described in the previously issued message UNV0153. The subjectName field of the certificate is specified in subjectName.
Severity
Error
System Action
Refer to message UNV0153.
User Action
Refer to message UNV0153.
Component
Cross-Platform Messages
----
UNV0156E OpenSSL thread call back failed: func, tid, file, line.
Description
An OpenSSL thread call back function failed. The function name is func. The internal OpenSSL thread identifier is tid, the source file name is file, and the line number is line.
Severity
Error
System Action
The program terminates with an abort call.
User Action
Report the problem to Stonebranch Customer Support.
Component
Cross-Platform Messages
----
UNV0171E SSL error in module: func, errno, reason.
Description
An error occurred in an SSL module. The message provides the module in which the error occurred, module, the function that encountered the error, func, the error number returned by the function, errno, and a textual description of the error number, reason.
Severity
Error
System Action
The action taken is dependent on the context in which the error occurred. Most often it will result in program termination.
User Action
Review other error message related to this error. If there is not sufficient information provided to resolve the cause, contact Stonebranch Customer Support for assistance.
Component
Cross-Platform Messages
----
UNV0172I Printing trace table.
Description
The memory trace table is being printed to the trace file.
Severity
Informational
System Action
Trace is formatted and printed.
User Action
No action required.
Component
Cross-Platform Messages
----
UNV0174E Process aborting: file, lineno, reason.
Description
A fatal error condition that cannot be recovered from occurred in file file on line number lineno. The reason provided for the abort request is reason.
Severity
Error
System Action
The program terminates immediately.
User Action
Report the problem to Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0175E User authentication failed: type, user, func, errno, reason.
Description
User authentication was not successful. The message fields identify the authentication type type, the user account being authenticated user, the function that detected the failure func, the error number errno, and the reason for the failure reason.
Severity
Error
System Action
The action depends on the program requesting authentication. If successful authentication is required to continue, the program will shutdown.
User Action
Contact the security administrator to correct the reason the user account failed authentication and rerun the command.
Component
Cross-Platform Messages
----
UNV0176E The dump request failed in function CEE3DMP: msgno.
Description
At the request of a console dump request, an LE dump was initiated. The CEE3DMP function failed to produce the dump. The LE message number is specified by msgno.
Severity
Error
System Action
Processing continues.
User Action
CEE3DMP message numbers are documented in the IBM LE Programming Reference.
Component
Cross-Platform Messages
----
UNV0177E The console MODIFY command specified an unknown option: opt
Description
A console MODIFY command was received that specified an unknown option. The value received is specified by opt.
Severity
Error
System Action
Processing continues.
User Action
Correct the option and reissue the command.
Component
Cross-Platform Messages
----
UNV0178E Certificate serial number: 'serialNo'
Description
Certificate verification failed as described in the previously issued message UNV0153E. The serialNo field of the certificate is specified in serialNo.
Severity
Error
System Action
Refer to message UNV0153E.
User Action
Refer to message UNV0153E.
Component
Cross-Platform Messages
----
UNV0179E Error opening configuration file 'cfgfile': func, errno, reason.
Description
The program could not open the file cfgfile, which contains the Universal Product client application's configuration settings. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Configuration files for a Universal Product client application (e.g., Universal Command Manager, Universal Query, etc.) must reside in one of the directories listed below.
On a Unix-based system (e.g., Solaris, AIX, Linux), the file must reside in one of the following directories (listed by search order):
- /etc/opt/universal
- /etc/universal
- /etc/stonebranch
- /etc
- /usr/etc/universal
- /usr/etc/stonebranch
- /usr/etc
On a Windows system, the configuration file must reside in the .\Universal\conf directory, which is located under the system-defined common application data directory. On Windows 200x- and XP-based systems, this is typically the "C:\Documents and Settings\All Users\Application Data" directory.
If the file specified by cfgfile is not present in one of these directories, or the directories specified above do not exists, re-run the installation script to create a configuration file or directory. If the file is present in one of the locations listed above, or the reason reported by the error message indicates something other than a missing file, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0180E Error parsing configuration data srcname: func errno reason
Description
An attempt to parse the specified configuration source failed. srcname is the source of the configuration data. A value of MANAGED-MODE indicates a managed mode configuration. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Correct the configuration file syntax if the configuration is not in managed mode. If assistance is required, contact Stonebranch Customer Support.
Component
Cross-Platform Messages
----
UNV0181E srcname: Invalid keyword 'keyword'
Description
A keyword in the specified configuration source was not valid. Possible reasons include the following:
- The length of the keyword exceeded 61 characters.
- The program did not recognize the keyword.
srcname is the source of the configuration data that contains the invalid keyword. A value of MANAGED-MODE indicates a managed mode configuration. keyword is the invalid keyword.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide for the correct names of available configuration options. If the configuration option is not supported by the version of the software currently installed, either upgrade the software or comment out the entry in the configuration file.
Component
Cross-Platform Messages
----
UNV0182E srcname: Invalid value for keyword 'keyword': reason
Description
The value given for the specified keyword is not valid. srcname is the source of the configuration data that contains the invalid value. A value of MANAGED-MODE indicates a managed mode configuration. keyword is the name of the keyword whose value is invalid. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide for an explanation of the configuration options, and for examples of valid option values. If assistance is required, contact Stonebranch Customer Support.
Component
Cross-Platform Messages
----
UNV0183E srcname: Error processing keyword 'keyword': func, errno, reason.
Description
An attempt to obtain or verify the value of a configuration option specified in a configuration failed. srcname is the source of the configuration data. A value of MANAGED-MODE indicates a managed mode configuration. keyword is the name of the keyword. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Refer to the User's Guide or command line help to verify that the configuration option is correctly defined. If assistance is required, contact Stonebranch Customer Support.
Component
Cross-Platform Messages
----
UNV0184E The local Universal Broker interface was not found. Ensure a local Universal Broker is running.
Description
An attempt was made to locate the local Universal Broker interface. No Broker Interface File (BIF) or shared memory segment could be located or security permissions prevented read access.
Severity
Error
System Action
The system action depends on the context in which the error occurred.
User Action
Check that a local Universal Broker is running. Rerun the command once the Broker is started.
Component
Cross-Platform Messages
----
UNV0185E Bad IP address: ipaddr, reason
Description
The resolution of the specified IP address failed. The IP address being converted is ipaddr. The reason resolution failed is specified by reason.
Severity
Error
System Action
The application may retry the resolution, depending on whether a configuration option exists and is defined to do so. Once all retry attempts have been exhausted, the application will terminate.
User Action
Make sure the IP address specifies a correct host name or a properly formatted numeric dotted IP address. Set the configuration option, if available, to a value that instructs the application to retry failed host name resolutions. Correct the host entry and/or change the value of the host name retry option, and try the command again. If the problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0186E Bad port number: port, reason
Description
The resolution of the specified port number failed. The port number being converted is port. The reason resolution failed is specified by reason.
Severity
Error
System Action
The program terminates.
User Action
Make sure the port number is a valid numeric port number or service name.
Component
Cross-Platform Messages
----
UNV0187I Starting IP address resolution attempt current of max.
Description
Another attempt is being made to resolve one or more of the hosts specified in the host list (note that the list may only consist of a single
host). This is attempt number current of the maximum number of attempts max.
Severity
Informational
System Action
Processing continues.
User Action
No action is required.
Component
Cross-Platform Messages
----
UNV0188E Error processing the host list: func, errno, reason
Description
One or more of the hosts in the specified list could not be processed. This message may be issued even if the host list consists of just a single host. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
If the error message indicates that a host name could not be resolved, or that the host was not found, correct the host entry and try again. If problem persists, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0189E Error randomly selecting an IP address for hostname: func, errno, reason
Description
An attempt to randomly select an IP address a list of one or more hosts has failed. hostname is the name of the host being processed. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error, Informational
System Action
For informational messages, the program will select a host. The selection may not be all that random, but it will allow the program to continue.
For error messages, the program terminates.
User Action
If the application provides a configuration option that causes hosts to be selected sequentially, set that option and rerun the application. If the cause of the message cannot be determined, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0190I CID = cid COMPLETION CODE = cc
Description
The message indicates the completion of a Universal Products manager that a local Universal Broker is monitoring. The value cid is the component identifier of the manager and cc is the manager's completion code.
Severity
Informational
System Action
Process continues.
User Action
No action required.
Component
Cross-Platform Messages
----
UNV0191I Processing console command 'cmd'.
Description
A console MODIFY command cmd has been received and is being processing.
Severity
Informational
System Action
Processing continues.
User Action
No action required.
Component
Cross-Platform Messages
----
UNV0192W A cipher that is scheduled for deprecation in a future release was selected: 'session', 'cipher'.
Description
This message is issued from the initiator of the session negotiation.
Severity
Warning
System Action
Processing continues.
User Action
Review configured cipher suites and adjust accordingly.
Component
Cross-Platform Messages
----
UNV0193W A cipher that is scheduled for deprecation in a future release was selected: 'session', 'cipher'.
Description
This message is issued from the remote side of a session negotiation.
Severity
Warning
System Action
Processing continues.
User Action
Review configured cipher suites and adjust accordingly.
Component
Cross-Platform Messages
----
UNV0195E Error retrieving default encryption key in func (errno): reason
Description
An attempt to retrieve a default encryption key from a Universal Broker-managed keystore has failed. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program that requested the default key terminates.
User Action
Review the error information and retry the command after correcting the reported problem. If the problem persists or cannot be resolved, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0196E Error storing default encryption key in func (errno): reason
Description
An attempt to save a default encryption key to a Universal Broker-managed keystore has failed. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program that tried to store the key terminates.
User Action
Review the error information and retry the command after correcting the reported problem. If the problem persists or cannot be resolved, contact Stonebranch customer support.
Component
Cross-Platform Messages
----
UNV0197E prodname is not allowed. Universal Controller did not grant a license to it.
Description
The Universal Controller is responsible for providing a license for the component specified by prodname. Either this component is not licensed by Universal Controller or all agent licenses have been consumed.
Severity
Error
System Action
The program terminates.
User Action
Check the Universal Controller's license parameters to ensure that it contains the parameters necessary to execute the component. If the number of licensed distributed (or zOS) agents are all in use, additional agents must be added to the license. Contact Stonebranch support to obtain an updated license.
Component
Cross-Platform Messages
----
UNV0198E prodname execution is not allowed. No valid local license information was found.
Description
This Universal Agent still obtains license information from local
configuration files. Although storing license information locally is deprecated, it is still supported in some instances. For those situations in which a license is not obtained from Universal Controller, the Agent still expects valid license information to exist in the configuration file of the component specified by prodname.
Severity
Error
System Action
The program terminates.
User Action
Update your installation to obtain license information from a Universal Controller to simplify license administration (note that an agent-only) license may be obtained from Stonebranch that does not require you to purchase a license for scheduler functionality. If you wish to continue using locally-configured licenses, contact Stonebranch customer support to obtain a new license.
Component
Cross-Platform Messages
----
UNV0199E Unable to validate prodname license information. The license information is not available.
Description
The Universal Broker is responsible for collecting and verifying all license information and for resolving its source. Although schedulded for deprecation, there are some situations in which the Universal Agent will still use locally-configured license information. Universal Agent 6.9.0.0 and later expect to receive its license information from a Universal Controller instance.
Until the Broker knows which license information to use, the license is considered to be unavailable. The most likely cause of this is a situation in which the Broker knows a UAG Server will connect to a Universal Controller, but UAG does not receive a response to its HELLO messsage. A lack of response could mean OMS Server connection information is configured incorrectly or no more agent licenses are available.
prodname is the name of the component whose execution is not permitted due to unavailable license information.
Severity
Error
System Action
The program terminates.
User Action
- Make sure the Agent attempting to connect to Universal Controller will has not caused the the number of licensed agents to be exceeded.
- Make sure an OMS Server is active and responding to Agent connection requests.
- Make sure the OMS Server connection information specified in the Agent configuration points is correct.
Component
Cross-Platform Messages