UNV5800-UNV5899
- Former user (Deleted)
- Stonebranch (Deactivated)
----
UNV5800A Spool Request Number: spoolreqnum
Description
Displays spool list request number of the job for which the spool list will be displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5801I Profile profileid of type profiletype was successfully activated.
Description
Indicates that the profile specified by profileId of type profileType was successfully activated.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV5802E Failed to activate profile profileid of type profiletype: (msgNo) bapiStr
Description
An error occurred trying activate the specified profile. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5803I Profile profileid was successfully deactivated.
Description
Indicates that the profile specified by profileId was successfully deactivated.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV5804E Failed to deactivate profile of type profileType.
Description
An error occurred trying to deactivate the specified profile type. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5805E Failed to retrieve CM profiles for type profileType.
Description
An error occurred trying to retrieve profiles of the specified type. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5806I Profile profileid of type profiletype was successfully set.
Description
Indicates that the profile specified by profileId of type profileType was successfully set.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV5807E Failed to set profile: error.
Description
An error occurred trying set the specified profile. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5808E Open failed for CM criteria file 'filename': reason
Description
The CM criteria file 'filename' could not be opened. filename is the name of the CM criteria file. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the specified file exists, and is in a location accessible to the user account running Universal Connector.
Component
Universal Connector
----
UNV5809I Profile profileid of type profiletype was successfully created.
Description
Indicates that the profile specified by profileId of type profileType was successfully created.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV5810E Failed to create profile: (msgNo) bapiStr
Description
An error occurred trying create the specified profile. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5811E Display event history failed: (msgNo) bapiStr
Description
An error occurred retrieving the event history. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5812E Failed to delete profile profileid of type profiletype: (msgNo) bapiStr
Description
An error occurred trying to delete the specified profile. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5813E Failed to retrieve criteria for profile profileid of type profiletype: (msgNo) bapiStr
Description
An error occurred trying to retrieve the specified criteria. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5814I Profile profileid of type profiletype was successfully deleted.
Description
Indicates that the profile specified by profileId of type profileType was successfully deleted.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV5815I Profile profileid of type profiletype was successfully retrieved.
Description
Indicates that the profile specified by profileId of type profileType was successfully retrieved.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV5816A Event ID: eventid
Description
Displays the ID of the SAP background processing event that will be waited for.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5817I count events detected: eventID/eventParm. retrieved.
Description
Indicates that the specified number of events were detected.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV5818E Variant purge failed: (msgNo) bapiStr
Description
An error occurred trying to purge a variant from the SAP system. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
This most likely does not indicate an error in processing. It usually indicates the absence of the variant in the SAP system.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5819I Variant var was successfully purged for report rpt.
Description
Indicates that the variant deletion process completed successfully for variant var of report rpt.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV5820E Mutually exclusive SUBMIT parameters specified.
Description
One or more conflicting parameters have been specified for the SUBMIT command. Each command group has a specific set of options that are available to it.
Severity
Error
System Action
The program terminates.
User Action
Determine which SUBMIT parameters do not belong. Remove the conflicting command options and reissue the command.
Component
Universal Connector
----
UNV5821E Copy variant failed: (msgNo) bapiStr
Description
An error occurred while copying the variant. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5822A ABAP program name: abapname
Description
Displays the name of the ABAP program associated with the variant to be copied.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5823A Variant name: variantname
Description
Displays the name of the SAP variant that will be copied.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5824A Target variant name: variantname
Description
Displays the name that will be used for the newly created SAP variant.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5825A Process Chain ID mask: mask
Description
Displays the process chain ID mask to use for chain selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5826A Process Chain description mask: mask
Description
Displays the process chain description mask to use for chain selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5827E Process chain selection failed: (msgNo) bapiStr
Description
An error occurred in the process chain selection process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5828A Process Chain ID: chainid
Description
Displays the process chain ID.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5829E Get process chain start condition failed: (msgNo) bapiStr
Description
An error occurred retrieving the process chain start condition. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5830A Process Chain Log ID: chainid
Description
Displays the process chain Log ID.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5831E Get process chain processes failed: (msgNo) bapiStr
Description
An error occurred retrieving the process chain processes. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5832A Process chain ID: chainid
Description
Displays the name of the process chain for which the status will be displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5833A Process chain log ID: logid
Description
Displays the process chain log ID for which the status will be displayed.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5834E Get process chain log: (msgNo) bapiStr
Description
An error occurred retrieving the process chain log. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5835A Process Type: processType
Description
Displays the process type.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5836A Process Variant: processVariant
Description
Displays the process variant.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5837A Process Instance: processInstance
Description
Displays the process instance.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5838A Job Count: jobcount
Description
Displays the job count.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5839E Get process log: (msgNo) bapiStr
Description
An error occurred retrieving the process log. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5840E 'Get Message Detail' failed: (msgNo) bapiStr
Description
An error occurred retrieving SAP message detail text. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error. Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5841I Process chain 'chainid' was successfully interrupted.
Description
Indicates that process chain chainid was successfully interrupted.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV5842A Chain ID: chainid
Description
Displays the name of the SAP process chain that will be interrupted.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5843E Get chain process list failed: (msgNo) bapiStr
Description
An error occurred in retrieving the process list for a process chain. The error originated in a BAPI called on the SAP system.
msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5844I Process status for processStatus/processStatus is now processStatus.
Description
Indicates that the precess status has changed to processStatus.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV5845I Process chain 'chainid' was successfully restarted.
Description
Indicates that process chain chainid/logid was successfully restarted.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Connector
----
UNV5846W Process Chain restart failed: (msgNo) bapiStr
Description
An error occurred in the process chain restart process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Warning
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5847A Job Status: status
Description
Displays the job staus criteria used for InfoPackage selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5848A InfoPackage Name: infopackage
Description
Displays the InfoPackage name criteria used for InfoPackage selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5849A InfoSource Name: infosource
Description
Displays the InfoSource name criteria used for InfoPackage selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5850A Source System: system
Description
Displays the Source System criteria used for InfoPackage selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5851A Data Source: system
Description
Displays the Data Source criteria used for InfoPackage selection.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5852E InfoPackage selection failed: (msgNo) bapiStr
Description
An error occurred in the InfoPackage selection process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5853E InfoPackage start failed: (msgNo) bapiStr
Description
An error occurred trying to start an InfoPackage. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5854E The current license parameters do not allow Business Warehouse functionality.
Description
The current value for 'License_BW_Interface' is 'no'. A value of 'yes' is required to use the Business Warehouse interface. This will require a new license from Stonebranch, Inc.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch, Inc. for information on obtaining a new license.
Component
Universal Connector
----
UNV5855E Generating usap job definition failed: (msgNo) bapiStr
Description
An error occurred generating a usap job definition. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number.
bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5856I BAPI message: (msgNo) bapiStr
Description
A BAPI warning or error message ws returned by a function call. The message originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number.
bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Informational
System Action
Depends on the context of the message.
User Action
Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the message.
Try to determine the cause of the message. If a cause cannot be found and the message persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5857I Reconnecting to command ID process chain: jobname/jobid/cmdid/logid..
Description
A command ID job matching the criteria specified on the command line was found. USAP will reconnect to the associated SAP process chain continue monitoring and or report the completed results.
Severity
Informational
System Action
The program continues.
User Action
Nothing.
Component
Universal Connector
----
UNV5858I Creating command ID job for process chain: jobname/jobid/cmdid/logid.
Description
A command ID job will be created in the SAP R/3 system for the associated process chain.
Severity
Informational
System Action
The program continues.
User Action
Nothing.
Component
Universal Connector
----
UNV5859E Job jobname/jobid already exists with Command ID (cmdId).
Description
A job with command ID cmdId already exists in the SAP R/3 system.
Severity
Error
System Action
The program terminates.
User Action
The pre-existing job with command ID cmdId must be removed from the R/3 system or, a unique jobname/command ID pair must be used.
If the intent is to restart the associated process chain instance, add the -force option to the command line.
Component
Universal Connector
----
UNV5860E Restart failed: Job (jobname) with command ID (cmdId) not found.
Description
Restart 'yes' was specified but, the restart job could not be found in the SAP R/3 system.
Severity
Error
System Action
The program terminates.
User Action
Make sure the process chain ID and command ID are correct. If the job is not found, the restart will not be able to complete.
Component
Universal Connector
----
UNV5861E Restart failed: multiple command ID jobs were found.
Description
Restart 'yes' was specified but, more than one job was found that matched the command ID job criteria.
Severity
Error
System Action
The program terminates.
User Action
Make sure the job name and command ID are correct. If they are correct, the duplicate command ID jobs must be purged from the R/3 system.
Component
Universal Connector
----
UNV5862E Restart failed: log ID not found in command ID job jobname/jobid.
Description
Restart 'yes' was specified but, the process chain log ID could not be retrieved. The command ID job was found but, it did not contain the process chain log ID.
Severity
Error
System Action
The program terminates.
User Action
Make sure the job name and command ID are correct. If they are correct, a restart is not possible.
Component
Universal Connector
----
UNV5863I Restarting command ID process chain: jobname/jobid/cmdid/logid..
Description
A force restart was requested. The process chain instance associated with the command ID job will be restarted.
Severity
Informational
System Action
The program continues.
User Action
Nothing.
Component
Universal Connector
----
UNV5864E Unable to determine chain ID for restart option.
Description
A job process chain ID was not found on the command line.
Severity
Error
System Action
The program terminates.
User Action
Make sure the process chain ID is specified on the command line.
Component
Universal Connector
----
UNV5865A Calendar ID: calid
Description
Displays the calendar ID.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5866A Calendar Type: caltype
Description
Displays the calendar type.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5867A Print details: opt
Description
Displays the option for printing details.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5868E Get SAP calendar failed: (msgNo) bapiStr
Description
An error occurred retrieving the SAP calendar. The error originated in a BAPI called on the SAP system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5869E Retrieving factory calendars failed: (msgNo) bapiStr
Description
An error occurred trying to retrieve factory calendars. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by Universal Connector. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Connector
----
UNV5870E Multiple jobs meet the selection criteria. Please qualify the job by specifying the Job ID or, use the resolve_multi_model option.
Description
An operation that required a model job from the SAP system found multiple candidates for the model job. A job ID qualifier was not specified and USAP was not instructed to resolve multiple candidates.
Severity
Error
System Action
The program terminates.
User Action
If the job ID of the model job is known, specify it on the command line to qualify the specific job to be used as the model. Otherwise, the resolve_multi_model option can be used to let USAP choose the appropriate model job from the SAP system.
Component
Universal Connector
----
UNV5871I Using model job: jobName/jobId \[user\] changeDate changeTime
Description
An operation that required a model job from the SAP system is using the specified job.jobName indicates the job name.jobId indicates the job ID.user indicates user who initiated the SAP model job.changeDate indicates the last change date for the SAP model job.changeTime indicates the last change time for the SAP model job.
Severity
Informational
System Action
The program continues.
User Action
Nothing.
Component
Universal Connector
----
UNV5872A SAPROUTER: saprouter
Description
Displays the sapRouter string that will be used to connect to the SAP system.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5873A RFC SNC library: path
Description
Displays path to the RFC SNC library.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5874A RFC SNC MYNAME: token
Description
Displays RFC SNC MYNAME token identifier.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5875A RFC SNC PARTNERNAME: token
Description
Displays RFC SNC PARTNERNAME token identifier.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5876A RFC SNC QOP: qop
Description
Displays RFC SNC QOP value.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5877A RFC PCS: pcs
Description
Displays RFC PCS value.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5878A RFC CODEPAGE: codepage
Description
Displays RFC CODEPAGE.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5879A RFC NO COMPRESSION: nocompress
Description
Displays RFC NO COMPRESSION.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5880A RFC ON CCE: on_cce
Description
Displays RFC ON CCE.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5881A RFC CFIT: cfit
Description
Displays RFC CFIT.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5882A SNC SSO: snc_sso
Description
Displays SNC SSO value.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5883A MYSAPSSO2: mysapsso2
Description
Displays RFC MYSAPSSO2 value.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5884A RFC X509CERT: path
Description
Displays RFC X509CERT value.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5885A RFC DELTA: delta
Description
Displays RFC DELTA value.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5886A RFC USE_SYMBOLIC_NAMES: use_symbolic_names
Description
Displays RFC USE_SYMBOLIC_NAMES value.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5887A RFC trace: level
Description
Displays the RFC trace level.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5888E Open failed for file 'filename': reason
Description
The file 'filename' could not be opened. filename is the name of the file. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the specified file exists, and is in a location accessible to the user account running Universal Connector.
Component
Universal Connector
----
UNV5889W Spool list page size exceeds user specified spool receive buffer (spool_recv_buffer).
Description
The buffered page size of the requested spool list on the SAP R/3 system exceeds the user specified spool receive buffer. Therefore, USAP will not attempt to retrieve the spoollist. The spoollist will be left on the SAP R/3 system. This message is followed by additional messages that provide information about the spoollist.
Severity
Warning
System Action
The program continues.
User Action
No action required.
Component
Universal Connector
----
UNV5890I Projected spool page size:title
Description
Displays the spoollist page size in bytes.
Severity
Informational
System Action
The program continues.
User Action
No action required.
Component
Universal Connector
----
UNV5891I Retrieving last line_count lines of the job log.
Description
The job log on the SAP system exceeded the user specified max job log size. <->
However, it was determined that line_count lines could safely be returned. Therefore, a partial job log was returned containing the last line_count lines of the log from the SAP system. The job log will be left on the SAP R/3 for further analysis..
Severity
Informational
System Action
The program continues.
User Action
No action required.
Component
Universal Connector
----
UNV5892I Projected request size..:bytes
Description
Displays the requested portion of the spool list size in bytes.
Severity
Informational
System Action
The program continues.
User Action
No action required.
Component
Universal Connector
----
UNV5893A SNC MODE: snc_mode
Description
Displays SNC MODE value.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5894A License information:
Description
This is a header message that precedes the display of the Universal Connector for SAP license information.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5895A Version: ver, date
Description
Displays the current version of the program. ver is the version number and current build level. date is the build date and time.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5896A Licensed to: owner
Description
Displays the holder of the software license. owner is the name of the customer that owns the license.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5897A License status: status
Description
Displays the current status of the software license.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5898A License source: source
Description
Displays the location from which license information was obtained. source will be a value to indicate the license was received from the Universal Controller or obtained via local configuration information.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector
----
UNV5899A License expiration: expdate
Description
Displays the license's expiration date. expdate is the expiration date/time, expressed as yyyy.mm.dd hh:mm:ss.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Connector