UNV3100-UNV3199
- Former user (Deleted)
- Stonebranch (Deactivated)
----
UNV3100E The transfer message 'id' was not understood.
Description
UDM received a transfer message it did not understand.
id Id of the transfer message.
Severity
Error
System Action
The transfer operation is aborted
User Action
If the problem persists, contact Stonebranch Technical Support.
Component
Universal Data Mover
----
UNV3101W Primary and second logical names cannot be the same.
Description
The primary and secondary logical names are the same. They must be different.
Severity
Warning
System Action
A warning is issued
User Action
Rephrase the command so that the primary and secondary logical names are different.
Component
Universal Data Mover
----
UNV3102W Record is larger than value of linelen without truncation or wrapping. Data will be lost.
Description
The length of the record is longer than the maximum set by the 'linelen' attribute. The 'wrapline' and 'truncline' attributes are both set to 'no'. Proceeding with the transfer would result in unexpected data loss.
Severity
Warning
System Action
An error is issued and the transfer request is terminated
User Action
The data in the file did not fit the set parameters. Lines can be wrapped by setting the 'wrapline' attribute to 'yes' or truncated by setting the 'truncline' attribute to 'yes'.
Component
Universal Data Mover
----
UNV3103W Failed to buffer output. Data is larger than the output buffer.
Description
UDM tried to write record data that is larger than its output buffer.
Severity
Warning
System Action
An error is issued and the transfer request is terminated
User Action
Contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3150E Keep alive interval lapsed in 'func', closing session.
Description
A keep alive message had not been sent and processed within the given time period and the transfer session was terminated.
func Name of the function where the failure occurred.
Severity
Error
System Action
The transfer session is terminated
User Action
Check the status of the network between all UDM instances. If the problem persists, contact Stonebranch Technical Support.
Component
Universal Data Mover
----
UNV3151E Failed to send keep alive message, closing session.
Description
The UDM Manager could not send a keep alive message as required.
Severity
Error
System Action
The transfer session is terminated
User Action
Check the status of the network between all UDM instances. If the problem persists, contact Stonebranch Technical Support.
Component
Universal Data Mover
----
UNV3152I Reconnection attempt number count of max in interval seconds.
Description
The manager has lost its connections to the server due to a network fault. The manager will attempt to reconnect to the broker in interval seconds. This is attempt number count of max attempts.
Severity
Informational
System Action
The session recovery process continues.
User Action
No action required.
Component
Universal Data Mover
----
UNV3153E Error connecting session session for recovery: func, errno, reason
Description
UCMD Manager was attempting to recover a lost network connection. An error occurred while accepting a new connection for the session session. The error occurred in function func. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, the manager will attempt to recover the connection with the server. The manager must initiate a new connection with the server. If the error was not due to a network fault, the server terminates.
User Action
Make sure a network connection is available between the manager and server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3154W Error cleaning up recovered session session: func, errno, reason
Description
An error occurred while closing a recovered session named session. A new session has been successfully created, and the old session was being cleaned up. func is the name of the function in which the error occurred. errno is error number. reason is an explanation of the error.
Severity
Warning
System Action
The program continues.
User Action
No action is required.
Component
Universal Data Mover
----
UNV3155E Error renegotiating sessname session options: func, errno, reason
Description
The manager is attempting to reestablish network connections after a network fault was detected. A connection was reestablished, but the manager and server were not able to renegotiate session options. Renegotiation was taking place for the sessname session. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation the error.
Severity
Error
System Action
If the error was due to a network fault, connection recovery starts over. If the error was not due to a network fault, the program terminates.
User Action
Make sure a network connection is available between the UDM and Universal Broker machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3156E Session name mismatch for recovered session session.
Description
UDM was attempting to recover a lost network connection. The manager was reestablishing the session session, but the server was expecting a different session.
Severity
Error
System Action
The session recovery process restarts.
User Action
The condition should correct itself. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3157E Error sending FORWARD_ID message to server: func, errno, reason
Description
UDM is attempting to reestablish network connections after a network fault was detected. A connection was reestablished, but the UDM components not agree on for which session it was for. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation the error.
Severity
Error
System Action
If the error was due to a network fault, connection recovery starts over. If the error was not due to a network fault, the program terminates.
User Action
Make sure a network connection is available between the UDM and Universal Broker machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3158I Connecting to broker at ipaddr, port.
Description
Indicates that Universal Data Mover is trying to connect to Universal Broker at internet address ipaddr on port port.
Severity
Informational
System Action
The program continues.
User Action
None required.
Component
Universal Data Mover
----
UNV3159E Error sending reconnect message in func(errno): reason
Description
Universal Data Mover was unable to send a request to Universal Broker to reconnect to the Universal Data Mover component. This error will also be displayed if the Broker rejected the message due to the state of the Universal Data Mover Server. The Broker will also reject the request if the Universal Data Mover Server component cannot be found. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the Broker rejected the reconnect request due to the state of the UDM Server, the manager may re-send the request, depending on the Server's state. If the Broker rejected the request for some other reason, the reconnect request will not be re-sent. If the request can't be re-sent, or some other error occurred, the program will terminate. If the request can be re-sent, the Manager will continue to do so until the number of reconnect attempts exceeds the retry count in the Manager's configuration.
User Action
Examine the error messages to identify the reason the request was not processed. Make sure the UDM Server component UDM is trying to reconnect to is still running, and is in a DISCONNECTED state. Make sure a network connection is still available between the client and server machines. Check the Universal Broker message log for any errors reported by Universal Broker. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3160E Error connecting session session for recovery: func, errno, reason
Description
UDM was attempting to recover a lost network connection. An error occurred while accepting a new connection for the session session. The error occurred in function func. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, the manager will attempt to recover the connection with the server. The manager must initiate a new connection with the server. If the error was not due to a network fault, the server terminates.
User Action
Make sure a network connection is available between UDM and the server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3161E Error connecting to component via broker: func, errno, reason
Description
An attempt by Universal Data Mover to set up standard I/O redirection connections to UDM Server by sending a request to Universal Broker has failed. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure a network connection is available between the UDM and Universal Broker machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3162E A network error occurred in func: (errno) reason
Description
A network error was detected. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The network connections will be reestablished with the server and the data transfers will continued from their last successful point.
User Action
Make sure a network connection is still available between the client and server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3163E Connection reestablishment successfully completed.
Description
A network error caused the UDM to reestablish network connections with the server. The connections have been successfully reestablished.
error.
Severity
Error
System Action
Universal Data Mover continues its processing from the point prior to the network error.
User Action
No action required.
Component
Universal Data Mover
----
UNV3164E Connection reestablishment has restarted.
Description
UDM Transfer Server has restarted the recovery of the connections.
Severity
Error
System Action
Connection reestablishment continues.
User Action
Make sure a network connection is available between all UDM machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3165E Error accepting session session for recovery: func, errno, reason
Description
UCMD Server was attempting to recover a lost network connection. An error occurred while accepting a new connection for the session session. The error occurred in function func. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, the server will attempt to recover the connection with UDM. The UDM must initiate a new connection with the server. If the error was not due to a network fault, the server terminates.
User Action
Make sure a network connection is available between the UDM and server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3166E Connection reestablishment failed.
Description
The server failed to reestablish network connections with UDM.
Severity
Error
System Action
The program terminates.
User Action
Review previously issued messages and messages issued by UDM to determine the cause of the failure.
Component
Universal Data Mover
----
UNV3167E Error renegotiating recovered session session options: func, errno, reason
Description
An error occurred while renegotiating session options for the recovered session named session. The error occurred in function func. The error code is specified by errno and its description by reason.
Severity
Error
System Action
The recovery action terminates. If the error is considered recoverable, the network connections will be reestablished, else the program terminates.
User Action
Should the problem persist or if the error is non-recoverable, contact Stonebranch Customer Support.
Component
Universal Data Mover
----
UNV3168E Session name mismatch for recovered session session.
Description
UCMD Server was attempting to recover a lost network connection. The server was reestablishing the session session, but the manager was reestablishing a different session.
Severity
Error
System Action
The session recovery process restarts. The server sends a negative acknowledgement back to the manager to indicate a recovery restart.
User Action
The condition should correct itself. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3169E Error sending an acknowledgement in response to the FORWARD_ID message on session session:func, errno, reason
Description
UCMD Server was attempting to recover a lost network connection. An error occurred while reestablishing a new connection for the session session. The error occurred in function func. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, the server will attempt to recover the connection with UDM. UDM must initiate a new connection with the server. If the error was not due to a network fault, the server terminates.
User Action
Make sure a network connection is available between the UDM and the server machines. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3170E Error processing FORWARD_ID message in func: (errno) reason
Description
An error occurred while processing the FORWARD_ID message from UDM The FORWARD_ID message is part of the manager and server protocol used to reestablish lost TCP/IP connections. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
If the error was due to a network fault, connection recovery starts over. If the error was not due to a network fault, the program terminates.
User Action
Make sure the network connection between the client and server machines is still available. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3171I Reconnection attempt count started.
Description
UDM is beginning to make its count attempt to reestablish its session.
Severity
Informational
System Action
Universal Data Mover attempts to establish a network connection with one. of its components in a transfer session.
User Action
No action required.
Component
Universal Data Mover
----
UNV3172E Session closed due to keep alive interval lapsing.
Description
A keep alive message had not been sent and processed within the given time period and the transfer session was terminated.
Severity
Error
System Action
The transfer session is terminated
User Action
Check the status of the network between all UDM instances. If the problem persists, contact Stonebranch Technical Support.
Component
Universal Data Mover
----
UNV3190I Session option, opt, set to val
Description
The session option, opt was set to a value of val.
Severity
Informational
System Action
The session option has been set.
User Action
No action required
Component
Universal Data Mover
----
UNV3191E Failed changing server job CCSID to ccsid. System issued message: msgid
Description
An error occurred in command CHGJOB CCSID(xxx).
Severity
Error
System Action
This error may be caused by either changing the UBROKER profile access authorities or by changing the CHGJOB command access authorities. Check the associated error message for additional diagnostic information.
User Action
Insure that the UBROKER profile has access to the CHGJOB command. Correct problems as indicated by the associated system message. If the problem persists, contact Stonebranch customer support.
Component
Universal Data Mover
----
UNV3192I Found null host/user values. udm_mgr_access rules may not be enforced.
Description
The udm_mgr_access rule was introduced in the 3.2.0 release. Pre-3.2.0 managers supply neither manager host names nor user IDs. Therefore, udm_mgr_access rules, other than those with host name 'ALL' and user ID '*', will not be enforced with pre 3.2.0 managers.
Severity
Informational
System Action
Processing continues unless a udm_mgr_access rule exists that denies access to all unrecognized UDM Managers (e.g., udm_mgr_access ALL,*,*,deny,auth).
User Action
Upgrade the UDM Manager to 3.2.0.0 or later.
Component
Universal Data Mover