UAG5600-UAG5699
----
UAG5600E Failed initializing Component Instance: func, errno, reason
Description
The component configuration information provided by Universal Broker and required by UAG Server to establish its runtime environment could not be processed. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support.
Component
Universal Automation Center Agent
----
UAG5601W Component ID cid has reached the trace limit of limit.
Description
When server trace files are written to a PDS or PDS/E, a single component identifier has a limited number of trace members it will create due to the limited length of a member name. The component identifier that reached this limit of limit is cid.
Severity
Warn
System Action
Processing continues with tracing is disabled.
User Action
Delete some of the trace members for this component.
Component
Universal Automation Center Agent
----
UAG5602E Service interface init error: func, errno, reason
Description
UAG Server was unable to establish a network interface through which it could receive internal commands from Universal Broker. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure TCP/IP is installed and properly configured on the system upon which the error occurred. If the problem persists, contact Stonebranch customer support.
Component
Universal Automation Center Agent
----
UAG5603E Component register error: func, errno, reason
Description
UAG Server was unable to register as an active component with Universal Broker. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure Universal Broker is still active on the system upon which the error occurred. If the problem persists, contact Stonebranch customer support.
Component
Universal Automation Center Agent
----
UAG5604E Error updating component state to state: func, errno, reason
Description
An error occurred while updating the component state. The new state is state. The function that failed was func. The error number was errno. A description of the error is reason.
Severity
Error
System Action
The system action depends on the context in which it occurs. Refer to other messages printed at this time.
User Action
Contact Stonebranch customer support.
Component
Universal Automation Center Agent
----
UAG5605E Error processing service interface request: func, errno, reason
Description
A request received from Universal Broker could not be processed. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support.
Component
Universal Automation Center Agent
----
UAG5606E func failed: (errno) reason
Description
A call to a system function, identified by 'func' was not successful. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support if unable to identify and resolve the problem.
Component
Universal Automation Center Agent
----
UAG5608E Cannot access the trace directory 'dir': reason
Description
The trace directory identified by dir could not be accessed. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Verify the trace file directory configuration option specifies an existing directory that the user account which the UAG server executes has proper security access.
Component
Universal Automation Center Agent
----
UAG5609E Cannot access the temp directory 'dir': reason
Description
The temp directory identified by dir could not be accessed. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Verify the temp directory configuration option specifies an existing directory that the user account which the UAG Server executes has proper security access.
Component
Universal Automation Center Agent
----
UAG5610E Cannot access code page file 'file': reason
Description
The text translation file specified by file cannot be read. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the specified file exists in the UAG server's 'nls' directory. If it does not exist, re-install UAG server.
Component
Universal Automation Center Agent
----
UAG5611E Cannot access installation directory 'dir': reason
Description
The installation directory identified by dir could not be accessed. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Check the value of the installation_directory entry in the UAG Server configuration file. Make sure the directory exists and the user account running the uagsrv program has sufficient access to that directory. Re-install UAG Server if necessary.
Component
Universal Automation Center Agent
----
UAG5612E Installation directory is not defined.
Description
The program could not find the installation_directory entry in the UAG Server configuration file, or the installation_directory entry has no value associated with it.
Severity
Error
System Action
The program terminates.
User Action
Make sure there is an installation_directory entry in the UAG Server configuration file. If the entry does not exist, add it. Set its value to the directory where UAG Server is installed. Reinstall the program if necessary.
Component
Universal Automation Center Agent
----
UAG5613E Cannot access nls directory 'dir': reason
Description
The nls directory, whose entire path is specified by dir, could not be accessed. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the directory exists and the user account running the uagsrv program has access to this directory.
Component
Universal Automation Center Agent
----
UAG5614E Cannot access CSK kernel directory 'dir': reason
Description
The CSK kernel directory, whose entire path is specified by dir, could not be accessed. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure the directory exists and the user account running the uagsrv program has access to this directory.
Component
Universal Automation Center Agent
----
UAG5615E Trace file directory verification failed: 'dir', func, reason
Description
The verification of the trace directory failed. The directory name is dir. This is relative to the installation directory. The function that failed is func for the reason specified by reason.
Severity
Error
System Action
The program terminates.
User Action
Verify that the directory exists and that the uagsrv user account has access to create, write, and delete files in the directory.
Component
Universal Automation Center Agent
----
UAG5616I Server STOP command received.
Description
The UAG Server received a STOP command from the Universal Broker. STOP commands directs the server to shutdown. STOP commands come from one of the following sources:
- Universal Broker
- Universal Control
- Universal Enterprise Controller
Severity
Informational
System Action
UAG Server shuts down.
User Action
No action is required.
Component
Universal Automation Center Agent
----
UAG5617I Trace file is 'file'.
Description
UAG Server was started with a message level of TRACE, which may result in an application trace being written. The trace file path name is file.
Severity
Informational
System Action
The program continues.
User Action
No action required.
Component
Universal Automation Center Agent
----
UAG5618I Trace data set is 'dsn, volser'.
Description
UAG Server was started with a message level of TRACE, which may result in an application trace being written. The trace data set is dsn on volume volser.
Severity
Informational
System Action
The program continues.
User Action
No action required.
Component
Universal Automation Center Agent
----
UAG5619W Error creating trace file: func, errno, reason.
Description
An error occurred creating the trace file. The function that encountered the error was func. The error is identified by the error number, errno, and error reason, reason.
Severity
Warning
System Action
Processing continues with tracing disabled.
User Action
Correct the condition that caused the error and rerun the server.
Component
Universal Automation Center Agent
----
UAG5620E Error establishing local broker session: func, errno, reason
Description
An error occurred establishing a communication session with the local broker. The function that failed is identified by field func. Field errno is the error number, and field reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
If the reason indicates the connection was refused, then the local Broker is not running. Start the local Broker and rerun the command. Contact Stonebranch customer support for assistance.
Component
Universal Automation Center Agent
----
UAG5630W Broker is down or unresponsive: func, errno, reason
Description
Communication attempts with the Broker have failed on the persistent session maintained with the Broker. The function that failed was func. The error code and error reason are errno and reason, respectively.
Severity
Warning
System Action
UAG Server shuts down.
User Action
No action is required.
Component
Universal Automation Center Agent
----
UAG5631E Missing required configuration option name.
Description
A required UAG server configuration option was not specified. The configuration option name is name.
Severity
Error
System Action
UAG Server shuts down.
User Action
Provide the UAG server configuration option and restart the UAG server.
Component
Universal Automation Center Agent
----
UAG5632E UAG: errmsg
Description
A general-purpose error message used to display errmsg.
Severity
Error
System Action
Processing may continue, depending on the severity of the error.
User Action
Review the error reported by errmsg. If the cause of the problem cannot be determined or resolved, please contact Stonebranch customer support for assistance.
Component
Universal Automation Center Agent
----
UAG5633I JCL library allocation for ddname ddname:
Description
Automation Center JCLLIB feature allows for batch job JCL to be search for in specified ddname allocations, referred to as JCL librares. The JCL library allocations specified in the UAG configuration file are listed for each ddname. This message starts the data set allocation list for ddname ddname.
Severity
Informational
System Action
Processing continues.
User Action
No action required.
Component
Universal Automation Center Agent
----
UAG5634I Data set position: dsn
Description
Prints the data set name, dsn, allocated to the JCL library ddname printed in message UAG5633I. The data set may be one of many data sets concatenated to the ddname. position indicates its position in the concatenation.
Severity
Informational
System Action
Processing continues.
User Action
No action required.
Component
Universal Automation Center Agent
----
UAG5635E Error allocating JCL library concatenation to ddname ddn: func, errno, reason
Description
An error occurred when UAG server was allocating JCL libraries to ddname ddn. The JCL libraries being allocated are specified in the UAG server configuration file using the JCL_LIBRARY option. The error information consists of the function that encountered the error, func, the error number returned by the function, errno, and the explanation of the error number, reason.
Severity
Error
System Action
UAG process terminates.
User Action
Determine the reason the data sets could not be dynamically allocated based on the error information provided.
Component
Universal Automation Center Agent
----
UAG5636E Error freeing JCL library concatenation ddname ddn: func, errno, reason
Description
An error occurred when UAG server was freeing JCL libraries allocated to ddname ddn. The error information consists of the function that encountered the error, func, the error number returned by the function, errno, and the explanation of the error number, reason.
Severity
Error
System Action
UAG process continues.
User Action
Determine the reason the data sets could not be dynamically freed based on the error information provided.
Component
Universal Automation Center Agent
----
UAG5637E Error creating RSA key pairs: func, errno, reason
Description
An error occurred creating the HUB's RSA private and public key pair. The function that encountered the error was func. The error is described by the error number errno and error reason reason.
Severity
Error
System Action
The program terminates.
User Action
Correct the condition that caused the error. If the condition cannot be determined, contact Stonebranch Customer Support.
Component
Universal Automation Center Agent
----
UAG5638E Error creating certificate: func, errno, reason
Description
An error occurred creating the HUB's X.509 certificate. The function that encountered the error was func. The error is described by the error number errno and error reason reason.
Severity
Error
System Action
The program terminates.
User Action
Correct the condition that caused the error. If the condition cannot be determined, contact Stonebranch Customer Support.
Component
Universal Automation Center Agent
----
UAG5639W Work request execid denied access by UACL rule rule: userid
Description
Universal Automation Center Agent work request UACL rule number rule has denied execute access to the task instance identified by execution ID execid. The criteria used to find the matching UACL rule was the user identifier userid specified in the task credentials. UACL rules are numbered in the order they are listed in the UACL configuration file or the Windows Configuration Manager.
Severity