UNV4300-UNV4399
----
UNV4300E Database operation failed: file db operation (returncode) error message
Description
Database error on file file when performing db operation with return code - returncode error message - error message.
Severity
Error or Warning
System Action
The action of the program depends on the context in which the error occurred.
User Action
Contact Stonebranch Customer Support for assistance.
Component
Universal Enterprise Controller
----
UNV4301D Database error: 'error'.
Description
A database error occurred. The message provides detailed diagnostic information in the error field.
Severity
Diagnostic
System Action
The action of the program depends on the context in which the error occurred.
User Action
Contact Stonebranch Customer Support for assistance.
Component
Universal Enterprise Controller
----
UNV4302E Error reading ddname 'ddn': errno, reason
Description
An error occurred reading the JFCB of ddname ddn. The error number is errno, and the error reason is reason.
Severity
Error
System Action
The program terminates.
User Action
Correct the error and restart. Contact Stonebranch customer support if unable to resolve the error.
Component
Universal Enterprise Controller
----
UNV4303E Error mounting USS file system: func, errno, reason.
Description
An error occurred mounting an USS file system that contains the UEC databases. Function func returned an error code errno which is described by reason.
Severity
Error
System Action
The program terminates.
User Action
Determine what action to take based on the information provided by the error reason. Contact Stonebranch Customer Support if assistance is required.
Component
Universal Enterprise Controller
----
UNV4305E SAP logon error: message.
Description
An error has occurred in the RFC logon operation. Message gives information about the error.
Severity
Error
System Action
The logon operation will be attempted again at the next polling interval.
User Action
Check for additional messages issued by UEC. Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
----
UNV4306E SAP RFC error: operation, message.
Description
An error has occurred in an RFC operation. Operation gives the RFC operation that experienced an error. Message gives information about the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
----
UNV4307E SAP RFC error: operation no message available.
Description
An error has occurred in an RFC operation. Operation gives the RFC operation that experienced an error. No message is available to give additional information.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
----
UNV4308E Set XMI audit level failed: (msgNo) bapiStr
Description
An error occurred while attempting to set the SAP XMI audit level. At this point, UEC has successfully logged on to the SAP BC-XBP interface. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
----
UNV4309E Get remote system time failed: (msgNo) bapiStr
Description
An error occurred getting the remote system time for an SAP R/3 system. At this point, UEC is logging on to the SAP R/3 system. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
----
UNV4310W RFC call timed out: functionName.
Description
An RFC call did not complete within the number of seconds specified by the UEC command line parameter sap_rfc_timeout.
Severity
Warning
System Action
The program continues.
User Action
None.
Component
Universal Enterprise Controller
----
UNV4311I Retrying RFC call: functionName.
Description
A failed RFC call is about to be retried. The function is identified as funcName.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Enterprise Controller
----
UNV4312E RFC retry count exceeded: RfcRetryCount failed retry attempts.
Description
An RFC call could not be completed successfully. The RFC call was retried RfcRetryCount times.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. Verify the state of the network. Verify the state of the SAP R/3 application server. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
----
UNV4313E XMB logon failed: (msgNo) bapiStr
Description
An error occurred in the XMB logon process. At this point, UEC is logging on to the SAP BC-XMB interface. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
----
UNV4314W XMI logoff failed: (msgNo) bapiStr
Description
An error occurred while UEC was logging off of the SAP BC-XBP interface. The error originated in a BAPI called on the SAP R/3 system. Error gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Warning
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
----
UNV4315I Retrying RFC logon.
Description
A failed RFC logon is about to be retried.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Enterprise Controller
----
UNV4316E RFC logon retry count exceeded: RfcLogonRetryCount failed retry attempts.
Description
An RFC connection could not be established. The failed logon was retried RfcLogonRetryCount times. All retry attempts failed.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. Verify the state of the network. Verify the state of the SAP R/3 application server. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
----
UNV4317E Job select failed: (msgNo) bapiStr
Description
An error occurred in the job selection process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
----
UNV4318E Database corruption detected. Recovery for database is required.
Description
The database is corrupted. The UEC database recovery procedure needs to be performed as stated in the manual.
Severity
Error
System Action
The program terminates.
User Action
Perform the UEC database recovery procedure as stated in the manual.
Component
Universal Enterprise Controller
----
UNV4319E User (user) does not have permissions to execute message. Session Terminated.
Description
The user attempted to execute a message on the UEC server without having the necessary permissions.
Severity
Error
System Action
The client session terminates.
User Action
Contact Stonebranch customer support.
Component
Universal Enterprise Controller
----
UNV4320W Managed state of broker differs from UEC database: broker - (broker state), UEC - (uec state).
Description
Upon polling broker the managed mode state of broker differs from UEC database. The broker's managed mode state is broker state. The managed state in the UEC database is uec state.
Severity
Warning
System Action
The program continues.
User Action
Use UEC Administration to set the broker to the correct managed mode setting.
Component
Universal Enterprise Controller
----
UNV4321W The parameter parameter will be ignored.
Description
A parameter was specified but was not valid in its usage.
Severity
Warning
System Action
The program continues.
User Action
Review the documentation for the command and parameter.
Component
Universal Enterprise Controller
----
UNV4322E Date range error: reason
Description
A valid date range cannot be established using the specified starting and/or ending dates. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure dates are in the format of YYYY/MM/DD and times are in the format of HH:MM:SS. Also, make sure any start date and time specified is not greater than the specified end date and time.
Component
Universal Enterprise Controller
----
UNV4323E -stime and -etime parameters are required for export of events
Description
Start time and end time values are required when exporting events.
Severity
Error
System Action
The program terminates.
User Action
Make sure to include both the -stime and -etime parameters when performing an export of events.
Component
Universal Enterprise Controller
----
UNV4324I No UEC records found with matching specifications."
Description
A request was made to export records but none were found.
Severity
Info
System Action
The program continues.
User Action
Modify your options to identify records defined on the Universal Enterprise Controller.
Component
Universal Enterprise Controller
----
UNV4325I Commit record status. Tracking: tracking,User: user, Session: sid
Description
The user has changed the status of a commit. The tracking number is tracking. The user id is user. The session id is sid.
Severity
Info
System Action
The program continues.
User Action
No action required.
Component
Universal Enterprise Controller
----
UNV4326E The user username failed to login to UEC.
Description
The user username failed to login to UEC.
Severity
Error
System Action
The program terminates.
User Action
Retry to execute with a valid user name and password.
Component
Universal Enterprise Controller
----
UNV4327E Error receiving event messages: func, errno, reason
Description
An error occurred receiving Universal Subsystem Events from an agent.
Severity
Error
System Action
The program continues.
User Action
Contact Stonebranch customer support.
Component
Universal Enterprise Controller
----
UNV4328W Invalid socket during broker poll: name, addr:port, step1, step2
Description
An invalid socket was detected during a broker poll. The broker's defined TCP/IP host address is addr listening on port port. The processing steps that failed are step1 and step2.
Severity
Warning
System Action
The program continues.
User Action
None.
Component
Universal Enterprise Controller
----
UNV4329E Unable to locate SDO reference field: field, index
Description
There was a failure in retrieving a field from the SDO reference by using a corresponding index value.
Severity
Error
System Action
The program terminates.
User Action
None.
Component
Universal Enterprise Controller
----
UNV4330E location - func failed: (errno) reason